I have some values in the column and i want those values to be displayed in rows now. Example:
In the Excel sheet the data is in the form,
Column1 Column2 Column 3
TASK_TYPE NE_TYPE ADC_PARAM_ORL
I want in the format,
Column1
TASK_TYPE
NE_TYPE
ADC_PARAM_ORL
is to display a set of data based on filtered information.
My Data base:
Company Department Name
A X John
A Y Joe
A X Jane
B Y Bob
C Z Kate
A X Kerri
Based on user selection of Company and Department, I want to be able to display the relavent names.
If user chose Company A, and Department X, I want to be able to display
John
Jane
Kerri
I've used the ROWS, Index, Small combination that works perfectly (Please see sample below). However, since the this software doesn't support the ROWS function, and doesn't support Macros.
Is there a formula/function in excel that can take all the cells in a column, lets say Column A, and paste/display it in another file without the spaces between the cells with values and without duplicates?
Worksheet1
Column A
1 Name
2
3 Mike
4 Rob
5 Ryan
6
7 Mindy
8 Paul
9
10 Rob
11
12 Mindy
13 Chris
Worksheet2
Column A
1 Name
2 Mike
3 Rob
4 Ryan
5 Mindy
6 Paul
7 Chris
8
9
10
11
12
13
Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......
I have two columns in my spreadsheet, and both are dates. Using a calculation (one date minus the other) I get the duration (in days) between the two.
I also apply color coding to say if the duration is > X, then color code as red, etc.
All the color coding is working fine for values that are either > or < 0, but anything where the two dates are the same (date 1 - date 2 = 0), the value shows as blank.
When I click on the cell, the value "0" is actually IN the cell, but it's now showing, as if the font was colored white or something, but it hasn't.
I don't have anything in the code telling the worksheet not to display "0" values, so I don't know where to go...
I'm trying to make my spreadsheet display over 100% while calculating a long column of entries. Each entry is showing percentage cost per hour of a benchmark of $65.00 per hour. When an entry for example is $51.10 the percentage displays 0.79%, but if the entry is for example $73.89 then the displayed value is 1.14%.
How do I make this display the percentage over the benchmark of 65 as 110, 115 or whatever it calculates out?
Need help with this file, i did most of the code but cant figure out some bugs i am having.
CTRL-SHIFT-F runs the macro,
the problem i am running into is ,
1), i have the macro looking up the legend in row 3 in the factory install tab, and having it find this legend in the T1 Verbiage file. Once found i want all of the data in the column of that legend pasted in row 12.
I currectly have the macro pasting the legend verbiage according to the legend in row 3 correctly but it leaves out some rows. Can someone look at the code and find out why its leaving out some rows of verbiage?
Next i have certain requirements of where Capital E's should go, where routine maintanence should go ect. I have that at the end of the code and is correct.
The problem here is with this part. ( starts at row 12, counds all of n which is the verbiage rows, then adds 8. So in other words this formula needs to be 8 rows after the verbiage ( which is dynamic depending on the legend ) ....
This is easy enough, but I only want to have items listed if every field on the row is unique which I can do, but is it possible to only display these unique lines and have any lines that contain a duplicate not be shown as a blank or anything else?
View 1 Replies View RelatedI have two groups of lottery results. The first group has the last year results of 200 rows, and the second group displays this year results of 100 rows. I want to start comparing the first row of the second group (green group) with all the rows of the first group( blue group)
View 12 Replies View RelatedI have a spreadhseet where columns I and J (range from I6 to J300) serve as input cells, off to the right, 23 columns over in AF and AG respectively I have a hidden array formula (Index, match) calculating values based on input in either column I or J and several factors embedded in reference table in the same sheet. That works fine. I want cells in columns I and J to be interdependent, in other words, input in column I drives calculations in a hidden formula and I want the value of that calculaton to display in column J (in a adjacent cell input in I6 results in display in J6), but if I input value in J then this value will drive calculation in a hidden formula and display in I (let's say I is centimeters and J is inches). I have a code that works (I set it up as a try just for few rows) but only one code section at a time, not together. If I choose column I (#9) to go first in code, values update in J, but not the other way around, if I choose column J (#10) to go first in code, values update in I, but not the other way around. What am I doing wrong, I tried Target.address case, I tried Intersect ... is nothing then etc. They all work one at a time but not together. Here is the code as it stands now
View 3 Replies View RelatedI have data in rows like this
A B C
1 x y z
2 x y z
3 x y z
4 x y z
5 x y z
6 x y z
7 x y z
8 x y z
9 x y z
10 x y z
11 x y z
12 x y z
What I am looking for is that I want to repeat the rows after every third row in another column. For eg
A B C D E F G H I
1 x y z x y z x y z
2 x y z x y z x y z
3 x y z x y z x y z
putting rows between different values in first column. The following puts 3 row inbetween each value in column "A".
View 2 Replies View RelatedI've tried (and failed miserably!) to copy and then paste values from a COLUMN to a ROW using all sorts of code I'd picked up in the forum but all the code only works when copying and pasting values from ROWS to ROWS.
I have data in cell A1, A3, A5 to A13 on Sheet1 (notice blank cells inbetween) that I'd like to copy to to Cells A2 to M2 (A1 to M1 have headings) on Sheet2, then A3-M3 etc.
The cells on Sheet1 will always be the same, BUT each time I click the "Transfer Data" button, those values must be transferred to Sheet2 IN THE NEXT EMPTY ROW, please.
It is not necessary to skip the blank cells in the COLUMN Sheet1 - simply copy / paste them as empty on Sheet 2 and I'll hide the empty columns, i.e. B, D, etc. If it is easy to code this "skipping of blank cells" (thereby limiting the copying / pasting data in order to speed up the process), then that code would be great - I simply do not know what effect it would have.
The values thus copied will become my data sheet.
I have been trying to transpose a piece of code that was put on this forum back in 2005 into my own Workbook but have been unsuccessful. The original piece of code filtered a column for unique entries and then filtered the main sheet for each unique entry and cut and paste each row that the unique value occurred in and in a new worksheet. A new worksheet would be created for each unique filter.
So what I am trying to do is look up a list of values that i have in a list on the worksheet. Then for each entry in my list, create a new page and cut and pasted the filtered main worksheet into that page.
Finally return to the main worksheet and then remove all filters.
I have attached the original file that was submitted so you can look at how it works and I have posted a sample my worksheet (with some things disabled to reduce file size but hopefully you will get the layout. However I don't currently have that sample on this computer. It is posted on another thread under the title "Selecting rows with specific values in a column".
I'm using Windows XP with MS Excel 2003. I have a pivot table representing a survey. Let's say I've built the survey outside of excel and I've imported the response data into Excel. One of the questions in the survey is "ratings" and the possible valid responses for it is: "Excellent", "Good", or "Poor". In my data set in excel let's say I have 10 responses or rows and all the responses for the question on ratings are either "Excellent" or "Good". (There are no rows with a "Poor" value in the ratings column).
For example, let's say out of the 10 responses, 6 are "Excellent" and 4 are "Good". As such my Pivot chart shows two bars: one for the number of respones with "Excellent" (10) and another bar for the number of responses with "Good" (4). My delima is how to show a third bar showing "Poor" with a zero as the number of responses.
For example I have a data set that will grow over time say 13 rows, I want to write a formula that will only use the last 3 rows with data entered and get the Median of those rows. I know that the Median Formula for the entire 13 rows would be =MEDIAN(A3:A16). Anyone know a way to make a Median formula only look at the last 3 in any given time without manually updating the formula's range?
View 3 Replies View RelatedI have a table (Arrears) showing a list of customers with part numbers and quantities in arrears. A second table is a customer order table showing details of what needs to be shipped for a given date.
Based on these two tables, I would like to add a column to the Order table to show the values for arrears against the order quantity for the given date. In addition if there are no order requirements but there are arrears then insert a row to show the corresponding arrears.
see the attached spreadsheet for more details. This shows the two source tables (Arrears and Order) and the expected results showing the added column for arrears and the inserted rows.
I have three rows of data (29-31) from columns D to Q.
I would like to take D29 and add each of the values in the adjacent columns exactly once and sum up the value D thru Q
For example I'd like to return not just Sum(D29:Q29) but also Sum(D29:R29)+Q30, Sum (D29:R29) +Q31.
Macro that would add these values?
That is D29 + E29 or E 30 or E31 + F 29 or F 30 or F 31 + G 29 or G 30 or G 31... and on?
Even though I wrote "or" above, i would need the other values to be added in a separate calculation, until all possible permutations of D and the following 8 columns and 3 rows of data are exhausted.
Column A of my spreadsheet consists of Subcase 1000 to Subcase 1010 for example, with up to as many as 100 repetitions of each subcase in consecutive order. See Below:
Subcase 1000
Subcase 1000
.
.
.
Subcase 1001
Subcase 1001
.
.
.
Subcase 1002
Subcase 1002
.
.
etc
I would like a macro to find where Subcase 1000 finishes and Subcase 1001 begins and then insert 2 new rows between them. These 2 new rows have to be inserted between any change found in the column A field. The searching of Column A should start at Row 15. I have uploaded an example file. This file contains 2 sheets, 'Before Macro' and 'After Macro'. Hopefully it outlines what the outcome of the macro should look like.
I've posted this thread in http://www.excelforum.com/excel-prog...ml#post2038238 but since the thread has been solved, I think nobody would look into my problem, so I'm creating a new thread for the purpose.
My previous thread:
Hi there,
I'm looking for the same idea only that I wanted the macro to select the data in the cells selected. Based on the code given by StephenR above, I tried to do some modification but I don't know how to make it to start from the first cell of my selection, not from row 15 as R_S_6 wanted. The range selection can be in any column. Here are the code that I used:
I have a spreadsheet which will have several rows of data.
What I need is for some code to locate the duplicate values in the left most active column and then look over the rows that they are populating and delete and cells that are not present in each of the rows pertaining to the duplicate value in 1st Column and if possible remove all the blanks.
I have a sample, I will attach it and explain alittle better there.
Is there a VBA code I can use that will delete all rows that contain "ABC" or "YXZ" or "HHH" in column A ?
View 2 Replies View RelatedIn Column "C" there is a list of numbers ( these number realte to incidentsm and are called incident IDs) and I want to delete the rows that have duplicate incident IDs.
the row of numbers looks like this ....
I'm attempting to write a macro that will select all the rows which contain a value in a specific column. Say for example, all the instances of "test" in column C, I need to select the entire row with that value in the column.
I should also mention that by using an autofilter, only specific row numbers are selected. The source spreadsheet is dynamic and will not always display the same value in the same row, and thus I need something a little more adaptable.
How can I delete rows in a worksheet using values in a certain column as criteria?
Example: I want to delete all rows that show a value of zero in column k. How is this done?
How I can show the longest string in a column, I've tried to find a formula that does this but it only shows the number of characters, not the actual string contents.
View 2 Replies View RelatedI have a combobox on a userform that I have set the columncount to 3, so it displays data from columns A, B, and C when the combobox dropdown is used. However, once someone makes a selection from the dropdown, only the item from the first column is displayed in the combobox. Is there a way for me to show the info from all 3 columns once a selection is made?
View 8 Replies View RelatedI am trying to search for a string of numbers (column 2) in an array, and have "YES" be written on the same line in column 3 if the string is found in the names ANYWHERE in column 1. Please see the desired results on the picture in column 3.
I have tried many things, including SEARCH function which can only work with 1 cell not many, COUNTIF and more advanced functions, but I think have not succeeded because of my lack of knowledge in arrays.
Is it possible to display the actual relative row and column number in a cell within a range more efficiently then listed below?
For example: I have a named range "data" D7:L19.
In cell E8 should display R2C2. In cell G17 should display R11C4. etc.......
I am using a method described below where cell E8 will have the formula:
="R"&ROW()-ROW($D$7)+1&"C"&COLUMN()-COLUMN($D$7)+1
The reason i am doing this is to solve a bigger problem creating dynamic column headers from a vertical list (named range). But sometimes the column headers, although being consecutive, may be listed in every other column.
Col 1 Col 2 Col 3 Col 4
Heading1 (nothing) Heading2 (nothing) etc......
Dynamic List
Heading1
Heading2
etc....
I have a company with upto 5 products, and I have created a dropdown box where you select your product.
When I select product 1 i would need info on product 1 , when i select product 2 I need info on product 1 and 2 and continue. so for product 5 -i need info on product 1-5.
I tried to add all info on excel and tried to delete it one by one by deleting rows in excel for products but it does not work.