Displaying Cell Values With Worksheet_Change By Value If Target Is In Certain Range
Nov 15, 2008
I have a spreadhseet where columns I and J (range from I6 to J300) serve as input cells, off to the right, 23 columns over in AF and AG respectively I have a hidden array formula (Index, match) calculating values based on input in either column I or J and several factors embedded in reference table in the same sheet. That works fine. I want cells in columns I and J to be interdependent, in other words, input in column I drives calculations in a hidden formula and I want the value of that calculaton to display in column J (in a adjacent cell input in I6 results in display in J6), but if I input value in J then this value will drive calculation in a hidden formula and display in I (let's say I is centimeters and J is inches). I have a code that works (I set it up as a try just for few rows) but only one code section at a time, not together. If I choose column I (#9) to go first in code, values update in J, but not the other way around, if I choose column J (#10) to go first in code, values update in I, but not the other way around. What am I doing wrong, I tried Target.address case, I tried Intersect ... is nothing then etc. They all work one at a time but not together. Here is the code as it stands now
View 3 Replies
ADVERTISEMENT
May 15, 2009
when I use worksheet_change for something so simple to do, it prevents me from deleting cells.
When I try to delete the cell values from A2 (5) and A3 (6), they won't delete unless I delete the value on A1 (True).
Private Sub Worksheet_Change(ByVal Target As Range)
Application.EnableEvents = False
If Range("A1").Value = "True" Then
Range("A2").Value = 5
Range("A3").Value = 6
Else
End If
Application.EnableEvents = True
Exit Sub
End Sub
View 9 Replies
View Related
May 26, 2009
I am trying to look through a multiple selection of cells (in Target range) and compare to see if these are Integer. I am failing to be able to cylce through the selected cells and check their value. I am sure it is VB 101 issue... but I am lost at cracking it.
View 2 Replies
View Related
Dec 5, 2008
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Application.Intersect(Target, Me.Range("R1C1")) Is Nothing Then
'do something
End If
End Sub
Now, that Private Sub works fine if you change the value of R1C1 manually or from another macro.
But if R1C1 is the cell linked to a list box, nothing will happen if you change its value by selecting different items in the list box.
View 4 Replies
View Related
Dec 27, 2011
Objective:
* I want to copy a range that starts at 1 cell immediately to the right of AddressStart and extends for 100 cells wide
* I want to paste 10 rows of this information
* AddressStart will be a variable address such as B2, B10, B1000
Here is my current code (which fails on copy/paste):
Code:
For NewRows = 1 To 10
WSReqs.Range(AddressStart).Offset(NewRows, 0).EntireRow.Insert
WSReqs.Range(AddressStart, Cells(0, 100)).Offset(0, 1).Copy Destination:=WSReqs.Range(AddressStart, Cells(0, 100)).Offset(NewRows, 0)
Next NewRows
Questions:
1) How do I set the relative reference to set the size of width of the row to be pasted?
2) Is it possible to refer to the end of the row (far right)
View 4 Replies
View Related
Mar 27, 2007
I want a macro in one worksheet to run when any cell (in a given range)on a different worksheet (dataentry) is updated. I have spent along time trying to make it work with no avail. The code I use to start my macro is as follows.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count <> 1 Then Exit Sub
If Target(1, 1).Address = "dataentry!H5:IV72" Then
If Not Intersect(Target(1, 1), Range("dataentry!H5:IV72")) Is Nothing Then
On Error Resume Next
Application.EnableEvents = False
View 7 Replies
View Related
Dec 15, 2008
Working on a simple worksheet_change issue for someone, the thought came, "after this code runs" it would be good if the TargetRange changed to no longer include the rows it had run on already. This way, if you later accidentally deleted/edited a cell that already had data, it wouldn't cause the macro to run again and do the paste job again?
Anyway, here is the code original
View 11 Replies
View Related
Aug 17, 2006
Is it possible to use a named range as part of the Target.Address in a Worksheet_Change event? For example, if I've named cell A1 to be XYZ, can I use something like the following VBA script:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = Range("XYZ") Then
.....
End If
End Sub
The above script obviously doesn't work. The only thing I can get to work is:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$A$1" Then
.....
End If
End Sub
I would like to be able to use a named range so that I don't have to remember to update my VBA when I insert rows or columns in my worksheet.
View 6 Replies
View Related
Oct 17, 2008
Worksheet_change for more than one cell
I have the code
View 3 Replies
View Related
Apr 24, 2012
I'm trying to sort values in order by how close they are to a target, whether they are above or below the target.
Example:
Target = 24
17
22
25
16
30
Result:
25
22
30
17
16
View 2 Replies
View Related
Sep 1, 2007
i am needing to issue a dos command in excel? basically i need to send a target link to a file. i cant use a hyper link for several reasons, and this is the only way i know how to go about this.
View 2 Replies
View Related
Jul 28, 2007
In the worksheet_change event I am calling a method for performing some calculations. The method is called only if certain cells are affected. I want to know the cell values before the event gets triggered.
For eg: Lets say Cell A1: 10 Cell A2: 20 I select both A1 & A2 and click on delete. Then I want to obtain the values 10 & 20 in the method called. Is this possible? Currently If I do Cell.value it returns blank.
View 5 Replies
View Related
Dec 17, 2007
Basically, I'm trying to do this:
View 11 Replies
View Related
Aug 29, 2007
The only problem is that once cell $A$1 changes to either Billable Impressions or CPM's to trigger the events the code keeps looping or formulating and won't stop... once I end the procedure if I hit enter in any cell it starts again and same problem persists...
way I can adjust this code to stop it from continuously calculating? ...
View 9 Replies
View Related
Sep 21, 2006
look at the attached workbook for an example of what i am trying to acheive and if possible modify or add another macro
in d7 i need a formula that equates to =C7-J7 where the column 'J' is known only by the 'TargetRange'.
Formula = "=c7-" & ccc & "7"
but what is required to reference the 'ccc' (TargetRange) column?
View 9 Replies
View Related
Nov 22, 2008
I have emails automatically being sent based on what is entered in the attendance columns, but now I need emails being sent on what is entered in the comments columns. Because the target range changes, I do not know how to combine them.
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("A11:A50, F11:F50, K11:K50, P11:P50, A55:A94, F55:F94")) Is Nothing Then Exit Sub
If LCase(Target) = "no" Then Call RouteActiveWorkbook(Target.Offset(, 1), Target.Offset(, 2), Target.Offset(, 3))
If LCase(Target) = "ex" Then Call RouteActiveWorkbook2(Target.Offset(, 1), Target.Offset(, 2), Target.Offset(, 3))
End Sub
This code results in two macros based on what it entered. Macro 1...........................
View 9 Replies
View Related
Jan 16, 2008
This piece of code copies cell info from column A into cell B1 only when cursor 'scrolls' on Col. A
How can i modify the code so that it copies into cell B1 when cursor scrolls up/down regardless of col.?
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Selection.Cells.Count = 1 Then
If Target.Column = 1 And Target.Value "" Then
Range("b1").Value = Target.Value
End If
End If
End Sub
View 9 Replies
View Related
Feb 10, 2010
I have this simple requirement
Business ProcessBp1Bp2Bp3Bs. Consulting
The Bs. consulting can take any values from business process like Bp1 or Bp1 or Bp2...
for this i have written validation macro
If Target.Address = "$C$21" Or Target.Address = "$D$21" Or Target.Address = "$E$21" Or Target.Address = "$F$21" Or Target.Address = "$G$21" Or Target.Address = "$H$21" Then
do the validation;
end if;
this works fine, but i need to use or condition , is there any better way to write this, a more compact way,
View 9 Replies
View Related
Nov 4, 2006
I have a number of columns, each containing several thousand points. For each column, I need to know the percentage of points that are within a certain percentage (1%, 3%, and 5%) of a target number.
View 4 Replies
View Related
Aug 24, 2014
Data is;
83300 - hypothetical number of times I have fired my gun at target.
43209 - hypothetical number of times I have scored bullseye.
So, my bullseye percentage = 43209/83300, or ~51.87%.
Need formula to determine how many more consecutive bullseyes I need to shoot, in order to achieve 70% ratio.
Since each shot from now on will be a bullseye, both values (hits & shots) will increment together.
View 5 Replies
View Related
Oct 22, 2008
I get and error which says Procedure declaration does not match description which might be because of ByVal Target As Range if this can not be used than what can be the exact solution for this as i have to get the Target address
Private Sub Workbook_SheetCalculate(ByVal Sh As Object, ByVal Target As Range)
Dim sht As Worksheet
Dim shtChild As Worksheet
Dim lngRow As Long
Dim intCol As Integer
Dim strValue As String
Dim Target As Range
Dim rng As Range
Application.ScreenUpdating = True
Application.StatusBar = False
Set sht = Sh............
View 9 Replies
View Related
Nov 12, 2003
Why doesn't the IS operator return True when comparing Target to a range in VB when they are indeed the same? Why do we have to keep backing in via rng.Address = Target.Address or Not Intersect() Is Nothing?
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
****
****'_____Works_____
****If Target.Address = "$B$2" Then
********Application.StatusBar = "To Be"
****Else
********Application.StatusBar = "Not to be"
****End If
****
****'_____This fails_____
****If Target Is Range("A1") Then
********Application.StatusBar = "A1 sauce anyone?"
********
****'____But this works_____
****ElseIf Not Intersect(Target, Range("A1")) Is Nothing Then
********Application.StatusBar = "żAlguien quiere salsa A1?"
****End If
End Sub
Again - this is just me wondering why... Am I missing something terribly obvious here?
(Edit) I am guessing it has to do with the Target argument for SelectionChange() coming in ByVal instead of ByRef, but not sure... (End Edit)
View 9 Replies
View Related
May 31, 2012
I have two columns in my spreadsheet, and both are dates. Using a calculation (one date minus the other) I get the duration (in days) between the two.
I also apply color coding to say if the duration is > X, then color code as red, etc.
All the color coding is working fine for values that are either > or < 0, but anything where the two dates are the same (date 1 - date 2 = 0), the value shows as blank.
When I click on the cell, the value "0" is actually IN the cell, but it's now showing, as if the font was colored white or something, but it hasn't.
I don't have anything in the code telling the worksheet not to display "0" values, so I don't know where to go...
View 5 Replies
View Related
Jun 2, 2014
I have a target range for a worksheet change. Then when finished I highlight the data and press 'delete' I get an error within the code.
View 2 Replies
View Related
Feb 4, 2008
I'm trying to make my spreadsheet display over 100% while calculating a long column of entries. Each entry is showing percentage cost per hour of a benchmark of $65.00 per hour. When an entry for example is $51.10 the percentage displays 0.79%, but if the entry is for example $73.89 then the displayed value is 1.14%.
How do I make this display the percentage over the benchmark of 65 as 110, 115 or whatever it calculates out?
View 9 Replies
View Related
Mar 30, 2009
I have some values in the column and i want those values to be displayed in rows now. Example:
In the Excel sheet the data is in the form,
Column1 Column2 Column 3
TASK_TYPE NE_TYPE ADC_PARAM_ORL
I want in the format,
Column1
TASK_TYPE
NE_TYPE
ADC_PARAM_ORL
View 2 Replies
View Related
Jun 26, 2008
Is there a formula/function in excel that can take all the cells in a column, lets say Column A, and paste/display it in another file without the spaces between the cells with values and without duplicates?
Worksheet1
Column A
1 Name
2
3 Mike
4 Rob
5 Ryan
6
7 Mindy
8 Paul
9
10 Rob
11
12 Mindy
13 Chris
Worksheet2
Column A
1 Name
2 Mike
3 Rob
4 Ryan
5 Mindy
6 Paul
7 Chris
8
9
10
11
12
13
View 11 Replies
View Related
Mar 13, 2009
is to display a set of data based on filtered information.
My Data base:
Company Department Name
A X John
A Y Joe
A X Jane
B Y Bob
C Z Kate
A X Kerri
Based on user selection of Company and Department, I want to be able to display the relavent names.
If user chose Company A, and Department X, I want to be able to display
John
Jane
Kerri
I've used the ROWS, Index, Small combination that works perfectly (Please see sample below). However, since the this software doesn't support the ROWS function, and doesn't support Macros.
View 7 Replies
View Related
Feb 9, 2009
Is it possible to display the actual relative row and column number in a cell within a range more efficiently then listed below?
For example: I have a named range "data" D7:L19.
In cell E8 should display R2C2. In cell G17 should display R11C4. etc.......
I am using a method described below where cell E8 will have the formula:
="R"&ROW()-ROW($D$7)+1&"C"&COLUMN()-COLUMN($D$7)+1
The reason i am doing this is to solve a bigger problem creating dynamic column headers from a vertical list (named range). But sometimes the column headers, although being consecutive, may be listed in every other column.
Col 1 Col 2 Col 3 Col 4
Heading1 (nothing) Heading2 (nothing) etc......
Dynamic List
Heading1
Heading2
etc....
View 9 Replies
View Related
Apr 30, 2009
I have a range (A5:DG5). Some of these cells are empty, some are populated.
I would like to display a vbYesNo box that shows the value of each populated cell on a different line, with no gaps for non-populated cells.
View 9 Replies
View Related