Multiple Series Chart/Graph
May 15, 2008
I have a scatter graph that has over 100 curves that im need on one graph that at the moment i putting each x and y and name in by hand in series. I have been doing it for hours and have looked round the site to see if anything similar answer on ozgrid would help but im baffled
i was just wondering if there is an easier way of doing this
i havent really used macros but iv been reading up on it can i used it to do this?
I have added the table and graph and this is how i would like all the columns to look like
its the table called graph that makes the curves that i would like to be able to add in quickly
the rest im not too fussed about.
View 9 Replies
ADVERTISEMENT
Aug 18, 2006
how can i plot multiple series of values in one graph after checking some check boxes, which i have previously done, randomly?
View 4 Replies
View Related
Apr 23, 2008
Looking for code that returns the cell address of a series in a pre-existing graph. I have a graph that already has Source Data manually assigned to it. Is there a way to find just the cell values or location of a single Series in a SeriesCollection object? I know that in order to assign a series of data to a Series object, you do something like this:
ActiveChart.SeriesCollection(1).Values = Worksheets("My Worksheet").Range("A1:F1")
The issue I am tackling with is a graph that already has preexisting data in the Series object, and I just need a quick and easy way to find the address of this data set.
View 3 Replies
View Related
May 30, 2008
i have created a xlColumnStacked chart using VBA in excel 2000. i would like to place a line in the center of one of the Points(). How can i locate a specific point, for example Points(1), so what i can then "draw" a line in the center
View 7 Replies
View Related
Jun 30, 2008
I've been trying to work out a code for a while now to plot some series in rows on a graph. The wonderful Mr Pope helped me with one before but for series in columns but i just don't seem to understand it enough to use it for this problem. the graph already has 2 series plotted (called the envelope) so i have to use seperate series to plot the data.
Basically the name of series is down column A
but the range is from E1 to Y1
and the data to be plotted on the graph which already has two series plotted in it is E2 to Y2, E3 to Y3 etc. iv been trying to use this code but failing miserably
Sub adddatatopsd(Name As Range, XData As Range, YData As Range)
With ActiveSheet.ChartObjects(1).Chart
With .SeriesCollection.NewSeries
.ChartType = xlColumnClustered
.XValues = XData
.Values = YData
.Name = Name
.ChartType = xlXYScatterSmooth
End With
End With
End Sub...........................
View 4 Replies
View Related
Apr 15, 2014
I want to add a user-form on a chart, which will have check-boxes that will allow me to select series(lines) that I want see and compare in a chart. Currently my line chart has 24 series (Lines) which makes the chart very difficult to view and looks very busy. How do I add list of check-boxes that will allow me to select one or multiple lines that I want to see at a time?
View 2 Replies
View Related
Nov 18, 2008
I have a chart with 3 series':
Series1
Series2
Series3
The chart is called chtEngagement. I want to use vb to update these series'.
Series1 should be shown as:
View 5 Replies
View Related
Jan 17, 2014
I have created a dynamic chart for multiple series. I have created this using the offset function and have named 20 ranges. The problem I have is that if only 19 of the 20 named ranges are populated it reads that the worksheet contains one or more invalid references.
Is there a way to stop this from happening?
View 1 Replies
View Related
Aug 4, 2006
I have a chart that combines 2 xy plots and a set of stacked columns ( total of 4 series).
I can adjust the series ordering between the 2 xy plots, and between the stacked columns, but not for all 4 at the same time.
I'd like the legend to show up as:
Series1, Series2, Series3, Series4
where 1 and 2 are the xy plots and 3 & 4 are the components of the stacked columns.
It is currently:
Series3, Series4, Series1, Series2
Any idea how to re-order the legend entries?
View 9 Replies
View Related
Jan 16, 2008
My friend has set up an excel workbook with a sheet for every month (labelled Jan graphs, Feb graphs, Mar graphs etc) which has 7 pie charts per sheet. The problem is the pie charts are showing the 0% fields and the data labels are overlapping. I have found a macro that gets rid of the 0% labels but I need to repeat the macro for all the 7 charts on each sheet and all 12 worksheets for each month of the year. I am very new to VBA and coding of any type and have looked but can't find the solution.
The macro I am currently using for "Chart1" on "Jan graphs" is below. The charts are labelled Chart1, Chart2, Chart3 etc.
Sub ClearLabels()
Worksheets("Jan graphs").ChartObjects("Chart 1").Chart.ApplyDataLabels _
Type:=xlShowLabelAndPercent
For Each x In Worksheets("Jan graphs").ChartObjects("Chart 1"). _
Chart.SeriesCollection(1).Points
View 8 Replies
View Related
Jan 31, 2009
What I want to achieve is a script that would create a new scatter plot of multiple series from a selected block of cell. I found a thread that was similar but what is different from my data is that my x values are different for each series.
The format of the data is in the following format, the first series will the first x,y pair, the 2nd series would be the second x,y pair. I don't know if it'll be an issue but one thing is that the date might be different lengths. For instance, the 3rd series, only has 4 data points, whereas the other series contains 6 data points?
x0.200.400.600.801.001.20
y5.002.501.671.251.000.83
x0.100.200.300.500.701.30
y5.002.501.671.000.710.38
x0.100.300.400.50
y6.672.221.671.33
So essentially, is there a way I can have the script say, select your range, and then graph the selected range as a scatter plot?
View 9 Replies
View Related
Sep 27, 2011
I am trying to create a line graph that will incorporate multiple columns of data in one series of data. The reason I do not place all of the data in one column is because it could exceed the maximum amount of rows allowed in excel. Also I need the data split up for viewing purposes.
I can easily just graph one column but how do I combine all the columns into one line graph with the data being in separate columns. Basically all the columns will be my Y values and X values are just 1:n.
Example Below:
Column AColumn B Column C159261037114812
Now in the example all of the values are x values.
View 2 Replies
View Related
Aug 4, 2014
I run a large simulation experiment. I have a loop plotting data in excel of a user defined area. Because of the limit of 255 series I have allowed a maximum of 250 simulations (they all need to be plotted). But the length of each simulation is free. I know there is a limit of 32.000 data points in a graph and I have this as a condition too.
If I set the data range to 100 columns and 3000 rows the graph is produced when I plot by columns. (code below)
But if I set the data range to 250 columns and 1000 rows I get the above mentioned error message. Even though I only have 250 series.
After the data is plotted it is the code below that gets the error:
[Code] .....
View 1 Replies
View Related
Dec 22, 2011
I have the following code:
Sub Macro5()
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveChart.SeriesCollection(1).Delete
ActiveChart.SeriesCollection(2).Delete
End Sub
However, if there is no SereisCollection(1) actually present in the chart I get an error. How can I work around this? I will need an IF statement I assume, just not sure what it will look like.
View 4 Replies
View Related
May 31, 2008
I just recently installed Excel 2007 and I would like to know if it's possible to change all data points of a chart at the same time. In Excel 2003, I would normally hold down shift while clicking on each of the data points to make a global change. However, it appears I cannot do that in 2007.
I would like to display each data point's series name. When I go to Layout on the Excel Ribbon, and click on "Data Labels", and click on "More Data Label Options", the actual Y-axis values are shown for each data point. However, I do not want this - I actually only want the Series Name, but when I uncheck "Value" and check "Series Name" instead (under "Label Contains"), it only changes it for one of the series. Is there a better way, instead of going through each and every single series to make this change?
View 4 Replies
View Related
Aug 21, 2006
The following code is supposed to produce six series on an xlXYScatter chart. It produces seven with the seventh series being a repeat of the sixth but named series 7.
Sub Chart2()
Dim DataRange As Range
Dim CellString As String 'Stores a cell range in the form "AA27:AB39"
Dim CurrentSeries As Integer
Dim SeasonCount As Integer
Worksheets("Hemisphere").ChartObjects(2).Activate
CurrentSeries = 1 ............
View 9 Replies
View Related
Jun 24, 2008
I have a list of data on one sheet and a 'reports' page on another sheet. The reports page has several pivot tables and a pivot chart. I want the pivot chart to format the bars on the chart relevant to the series name. The series names are "R" "A" amd "G" for Red Amber and Green respectively, I want the chart to change the colour of the series so that it is the correct colour ie. "R" would be coloured Red, "A" would be Amber and "G" would be green.
Sub PivotLoader()
Dim Red As Integer
Dim Amber As Integer
Dim Green As Integer
Red = Range("H9").Value
Amber = Range("H10").Value
Green = Range("H11").Value
Range("B8").Select
ActiveSheet.PivotTables("PivotTable4").PivotCache.Refresh
Range("D25").Select
ActiveWindow.SmallScroll Down:=18
Range("B49").Select...........................
View 2 Replies
View Related
Sep 21, 2011
I would like to have two series of data using the same X axis (date, formatted in months). The Y axis is in intervals of 100,000.
The first data series is historical (actual) data (i.e. Jan 2009 to August 2011). The second data series is forecast (Sept 2011 - August 2012). So i want the forecast series to start immediately after the historical series. It is a 'line with markers' chart. The key objective is that the forecast data looks visually distinct from the historial series.
Excel version: Excel 2010
OS: Windows 7
View 5 Replies
View Related
May 15, 2008
I'm using the following code to set the colours of the slices of all the pie charts in my spreadsheet based on each slice's legend's label: ....
View 9 Replies
View Related
Dec 29, 2011
I have a spreadsheet created in Excel 2003 (which is what we use at work, unfortunately).
My employees periodically take a test to ensure they have certain items memorized (or are making progress to that end). The spreadsheet rows show all 46 of my employees, and their test scores. The columns are the dates that the tests are administered. I can create a line graph based on the chart data, and interpolate these data with no problems.
The problem is that there are 46 employees! 46 lines on the same graph make for a very cluttered, hard to understand visual. I want to simplify the view by "filtering out" some of the data.
I have an additional column in my spreadsheet for each employee's work area (Area 1, Area 2, etc), and another column with data based on first letter of last name (the values here could be "A-G", "H-M", "N-S" and "T-Z", for example). I figure i could filter my line graph based on these two columns. For example, somehow select just Area 1, and reduce the number of lines on the graph to 16. Or better yet, Choose "Area 2" AND "A-M" and end up with 7 employees (and therefore 7 lines on the graph).
Here's what i have tried:
1) Select the work area column, and use the Filter, which created a drop-down list at the column heading. When i use this drop-down list, i can easily filter the data in the worksheet by Work Area, but this is not reflected in the line graph, which still shows all 46 lines. The problem was that i forgot that i had set the Calculation Options to "Manual". Setting this to "Automatic" (or leaving it on Manual and pressing F9) solved the problem, as the chart now updates when i use the filters. Calculation options are under the "Formula" tab in 2007, or in Tools -> Options -> [either calculation or formula, i forget what it's called] in 2003.
2) Create several separate line graphs in several separate sheets. I wouldn't want to assign someone else the task of maintaining a spreadsheet of such inefficient design.
View 1 Replies
View Related
Apr 14, 2014
Is there any possible to add a series to a graph table without having the line in the Graph. i just want to show the difference for information and not in the graph?
i have tried some different things (like having the difference in white so it is not visible, formatting the Axis etc)
See attached picture. Excel 2.JPG
View 4 Replies
View Related
Jun 30, 2014
I have a graph that auto updates but sometimes there is only 1 series and sometimes there is 2,3,4, or 5 series. Is there a way to have the graph update accordingly? and only have have the series that are valid be in the key on the graph. Currently the graph keeps all the series in the key even when there isn't any data for it.
Please see attachment. Use sheet 2 for the graph. and use the drop down menu to select catagory. this ia very quick mock up of the concept.
Graphseries.xlsx
View 4 Replies
View Related
Oct 26, 2008
I want to delete all series which are in graphs. is there any way so that i can pull total number of series in VB from graph, and then just do all the series one by one.
View 2 Replies
View Related
Feb 21, 2007
I am creating a timeline using a stacked bar graph. The 3 colums in the source spreadsheet are title,start time and duration. The Two data series are start time and duration. I hide the start time series to give me timelines for each row in the spreadsheet. This works fine. What I'd like to do is to group the rows by title and distinguish by colour in the duration series but this doesn;t seem possible? I hope I've made myself clear.
View 4 Replies
View Related
Oct 23, 2007
I have a table which provides the source data for a Bar Chart style graph. I need the colour of the different Bars to change depending on the values in the table. For example. If the value is over 1% then the bar will change to the colour Red otherwise it will stay Green.
View 3 Replies
View Related
Apr 3, 2007
How can I avoid that an empty series shows up in the legend of a graph?
View 9 Replies
View Related
Jun 30, 2008
I have a chart with 3 data series. The series are located in columns A, B and C respectively. Series I is a general number anywhere from 0 to 100,000. Series 2 is also a number, but is is devided by series 1. So, if series 1 was 100,000 then series two would be 25,000/100,000 which is 0.25. Series three will always be numerator of series 2 or 25,000 in this example. The numerator, or the 25,000 will never change, so, in my example, series three will be a straight line across the chart because it is always 25,000.
In my example, the .25 is plotted on the left value axes, and series one is plotted on the right value acccess (secondary axis). Series three is just a line in the middle.
My problem is that sometimes the line, series 3, doesn't match the values in both the right and left values axes. So, if series one is 48,000, then series two would be 48,000/48,000 = 1, and series three would be 48000 - the straight line. The third series should be a line touching the 48,000 on the right and the number 1 on the left. It does touch the 48000 on the left, but is below the number 1 on the left.
View 9 Replies
View Related
Jun 19, 2008
I want to use a macro to change attributes of a series in a chart. Unbelievably, if the series has been pasted into the chart from another chart, and although the macro can address the series and even return values (eg name) correctly, the selection simply cycles to one of the original series on the chart.
View 3 Replies
View Related
Aug 29, 2012
A line graph is using a data row to plot the line; works fine. The data series ranges have been named for Week1 (H10), Week1_2 (H10:I10), Week1_3 (H10:J10), Week1_4 (H10:K10), Week1_5 (H10:L10), Week1_6 (H10:M10), Week1_7 (H10:N10), ...etc.
This is the data series formula name example to plot the data series from week 1 through week 7; ='Product Plan Q3 Week 7.xlsx'!Q3Wk1_7.
The series name formula Q3Wk1_7 for week 1 through week 7 is =$H$10:$N$10.
When this name is manually entered as a Series Value for the line graph, the graph plots exactly the way it is expected. The same is true if the Series Value is manually modified for some other ranges such as Week 1 through Week 9 (='Product Plan Q3 Week 7.xlsx'!Q3Wk1_9).
My challenge is to enter this Series Value based on the manually entered week number elsewhere; i.e., we're in week 7, the Series Value should be ='Product Plan Q3 Week 7.xlsx'!Q3Wk1_7. I've been trying to use an HLOOKUP table to select the correct Series Value formula based on the week number. The HLOOKUP works fine resulting in selecting the correct formula. I can also Name the range of data I want to graph and copy the name into the Series Value field with successful results. How do I get such a formula or Named range into the Series Value field without type it in? I want to set that Series Value to a range or name without having to select the line to manually enter the value.
View 3 Replies
View Related
Jan 7, 2014
I am in the process of setting up some graphs. The graphs will show the last 6 months of data so they move as each month is goes. I saw a slick way of doing this using the count function but this did not quite fulfill my needs. What I was looking for is to be able to input the start month in a cell. The cell would be part of the function within the formula. I created a simplified version of the spreadsheet below.
Spreadsheet.jpg
Then I created my names using the ctrl-F3
Names.jpg
I then created the graph I wanted and wanted to use the formula =SERIES(Sheet1!$B$3,!chtCat,!chtIssuesReported,1). This kept getting an error indicated nothing really. It basically says there is something wrong with my Series function. I have a working version of a similiar worksheet I have been basing my entries on. They look almost identical but mine is failing. I also created a new file and tried this and it still fails. I can run the formula evaluator within Excel 2010 against the !chtCat and !chtIssuesReported names and they both return the correct value (which equals areas on the spreadsheet). I have also tried to enter the spreadsheet name and a tab in front of the names to get them to work and still get an error. Basicall I am trying to create the graph below (this grpah is using the hard coded locations)
Graph.jpg
View 2 Replies
View Related
