I have the following formula:
m = Application.Match(Range("F2").Value, Sheets("AB123").Range("A:A"), 0)
Range("A" & m & ":W" & m + 5).Select
Formula works fine, it matches a value, and selects the following 5 rows.
I would like to change it, so that instead of selecting the follwing "5" rows, i would like it to select the value in cell F3.
Hope someone can help with this - Please can I have some VB code that will select all rows in columns H2:M2, when I don't know each time where the last row will be? I'm guessing this is a dynamic range, but not sure!
View 8 Replies View RelatedThis will be an easy on for you seasoned programmers. I want to find the last used cell in a column, and then select an offset range based on the location of that cell. For example, in the attached workbook, I have a button at the top that activates a macro to add a new week to my time sheet. This simply copies the contents of the current week, and adds it at the bottom.
What I would like to do next is clear the data from the newly added cells, leaving the formulas in columns A, B, C, J and K. In the attached example, I have just added Week 3. I would now want to locate the last used cell in Column C, (C24), then offset from that cell to select the range D18:I24, and clear the contents of those cells.
I created a very small macro in excel but it is not working exactly as I want to. I have few buttons which have a comment assigned to them. When I select a random cell and click the macro button it should add the comment that assigned by the button.
What I was able to create is when I click the button, it asks me for the cell number, this was the only workaround I could do.
I am looking to use dynamic ranges for a project and have not used them before so forgive me if the answer to this is obvious.
After declaring a dynamic range
Name = Upload
=OFFSET(Sheet1!$A$1,0,0,COUNT(Sheet1!$A:$A),4)
I have added additional data at the end (Row24). I wish to then check that the range has expanded but cannot find a way to select it.
Ctrl + F3 shows the defined name 'Upload' but:-
F5 does not show the range 'Upload'
The drop down box at the left of the formula bar doesn't show it.
How do I select range 'Upload' to simply show the dynamism works, without using VBA?
Example sheet attached.
I need to select data starting from cell 16B until 16K until the end of excel file... i will use this to export data into database later... I have attached a sample excel file with records needed to be selected
View 3 Replies View RelatedI have a workbook with rental properties containing 2 sheets. 1 sheet with the general details and the rate sets and 1 sheet where I'm trying to calculate the total price for a period of time between 2 dates. I would like the people who use this workbook to simply enter the dates and get a price based on the amount of days within a rate set.
eg: 1 to 7 days is weekly, 8 to 31 is monthly etc. To display this, I'm using: =LOOKUP(H3,{0,7,30,180,365;"daily","weekly","monthly","6 months","yearly"})
These rates are different for each property, and this formula isn't exactly dynamic; it just displays which rate should be used.
Now my idea is to use IF/THEN kind of a formula, but I'm lost on how to do this. The actual rates are on the other sheet in separate rows and columns belonging to the appropriate property. Also, the rates as they are will probably need to be recalculated to a daily number before it can be used for the price calculation, because a month has either 29, 30 or 31 days.
At the moment the daily rate is diplayed as a daily rate
The weekly as a weekly rate
The Monthly as a monthly rate
The 6-Monthly as a Monthly rate (with a minimum of 6 months of course)
And the yearly also as a Monthly rate (with a minimum of 12 Months)
I've attached the sheet as a reference : Property details import.xlsm
I need a macro to start at cell A11 and select across 10 columns and down to the Lastrow (last row with any data).
There are hidden columns after column D so it CANNOT have any columns hardcoded except for column A.
This selection then needs to be set as a single print area to print out on 1 page. I have already set Rows 1-10 as a title area to print at the top of each page.
Code i currently have is:
[Code] .......
I just need it to now go across 10 visible columns and set as a single print area.
I am having issues with a VBA script. The Spreadsheet is linked to a SQL DB and updated with data from scripts that are executing throughout the day. This is then fed to a dashboard. We have a Baseline that shows in the Date column as 0/0 and 1/1. I need a way to ensure that the 1/1 is always in the last row of the chart so the baseline shows across the entire range of dates. The current method is to declare a variable and add 1 to it whenever we iterate through the sort for the other dates. However everyday the 1/1 baseline column ends up further to the beginning until it is next to the 0/0 in position 2.
So I am trying to find a way to have the macros find the last row of the Date field and then set the position to be equal to the last row.
I require code to identify the last row in column 'A' that contains data, and then to select every row up to that one, and each column up to 'H'. My data begins on row 3, and the rows with data varies from row 7 through 120. The columns with data is constant so there is no need to test in that direction.
View 2 Replies View RelatedI have a range of data in columns A2 to Mx. The length of the columns varies, and all cells are not always populated. I want to be able to select the entire range, no matter what its length, no matter how many cells are populated (as both of these will vary on each tab) However, I do not want to select A1 to M1 as this is column headers which need to be excluded from the data for compliation purposes.
View 9 Replies View RelatedI am trying to replicate the following code using Cells references so that the row can be made a variable. I basically want to make the search array smaller with each loop.
LMatch = WorksheetFunction.Match(Cells(3, 3), Sheets("Product Matrix").Range("B3:B250"), 0)
The above works, the following two variations don't:
LMatch = WorksheetFunction.Match(Cells(3, 3), Sheets("Product Matrix").Range(Cells(ArrayStart, 2), Cells(250,2), 0)
LMatch = WorksheetFunction.Match(Cells(3, 3), Sheets("Product Matrix").Range("B3:B250").Item(ArrayStart, 2), 0)
Is anyone aware of some way to use the " dynamic named range approach" to only select the cells with numerical values in a column and name this range?
I've looked at the examples on this site but can't find any solution to this particular problem although I have a feeling that this should be possible.
I need a macro that can search a sheet for a match and then copy all 7 cells to the right of the match. I have attached an example of the sheet that will serve as the database to search, and a userform example that will be similar to the userfrom that will display the copied cells when a match is found. I plan to copy and paste the 7 cells to a different sheet so that the userform can display the results with the control source property. I do not need a way to add to this database. I know very little about searching a database so.
View 6 Replies View RelatedI am very new withe macro I recieve every day a CSV file from our supplier withe a list of the products that got updated withe new price, stock count, product ID etc.
I have my own worksheet with the product ID that we use, and I want to finde the exact match to my product ID in that CSV file and delete all other that don't match.
But i need them get deletede by rows thos product ID that dosen't match to my workbook.
I tried with this, so it could set an X in front of my match then i could filter and copy it to my workbook but it dosen't work:
Because the same product ID is sometime in 100 rows and the X come only in front of one of them.
=IF(ISNA(MATCH(Q2:Q1000;G$2:G$1000;0));"";"X")
so with some macro. I need to have every row deleted that don't match to my list of product ID.
I have 2 worksheets named sheet1 and need_to_delete that are in the same format: 7 digit number, 5 digit alpha numeric, text, dollar amount. I need to copy every row into sheet2 where there are no matches in the column A of the two source worksheets, and copy every row that does have a match in column A into sheet 3. I also need to keep the rows in their current order.
View 5 Replies View RelatedI have attached a workbook.
I have a calculated value in H2. This value will correspond to values in the table provided. This value is dynamic and will change based on criteria that will be added.
The value H2 is a combination of to "letters" D1 and A2 or A4 and B1 i.e. trace back where the intersection of H2 occurs within the table
In Cells A8 and A9 I am trying to represent which combination of letters will result in an intersection of the value H2. In the example provided it is C and A.
What i would like to do is have Cells A8 and A9 be more dynamic. So if for example the value in H2 changed to say R12,06 then the intersection would be B and B. Therefore Cell A8 = B and Cell A9 = B
The formula is cell A8 and A9 doesn't cater for this as the range is fixed. I need a dynamic range for the index and match function based on the where the intersection of H2 happens to be in the table.
I have three columns of data in columns A,B,C - there are formulas in these columns that either produce a numeric value or return blank.
I have created Dynamic Named Ranges for each of them and have entered the following formula:
=OFFSET(Working!$A$1,1,0,MATCH(1E+305,Working!$A:$A,1))
My issue is that this formula is looking one row past the last numeric entry in the column (a blank) which is leaving a blank space when I graph this data.
I'm hoping to make a dynamic sorted list for each Mfg (H - T) using the garbled data input in columns B & C.
See attached : sorted list.xlsx
I have an excel workbook with a dynamic dependent drop down list setup, works a treat on the first worksheet i set it up on.
However here's the problem, my workbook contains a good handful of worksheets each named to reflect the certificate on the page, i need the drop down list to work on each tab. problem is when i setup the index/match function it requires a specific sheet name to make it work i.e.
=INDEX(Table1,0,MATCH(PI!$C20,Table1[#Headers],0))
However what i need it to do is reference the worksheet name, as new ones get added and names may change, something like
=INDEX(Table1,0,MATCH(&ActiveSheet.Name&$C20,Table1[#Headers],0))
However this doesn't work, i do have a cell on each page that holds the Sheet name using the function:
=MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,256)
But I cant even get it to use that cell as a reference in my formula.
I'm trying to extract the selected suppliers orders from a 1000+ rows list ; like appearing with the example of supplier "D" ; and the new one should be dynamic , it means if any data added to the source orders list and if the supplier was one of the selected the new table automatically update ; or can be refreshed
View 9 Replies View RelatedI have a sheet with dates on it, when i open my userform and select a date i want it to go to the sheet and look for a match on the date and select the cell where the match is. There will never be 2 dates that's the same. I have attached an example.
View 2 Replies View RelatedI am getting a #REF error when using an INDIRECT function within a MATCH function to check against a dynamic named range. Basically, I am trying to get the row reference so that I can go back and extract other data from the row (in a table contained in another sheet) into the current worksheet.
I attach an example file for reference. The issue arises when a Dynamic Named Range is used. In the example file, if a value from a static range is chosen, the match with indirect function works, but it fails with the dynamic range.
Dynamic Ranges INDIRECT v2.xlsb
I am having an issue when I try a chart a named range. The named range "Refers To" is
Code:
=OFFSET($A$1,(MATCH("Kevin",$A:$A,0)-1),,,COUNTA(INDIRECT(ADDRESS((MATCH("Kevin",$A:$A,0)-1),1,1,1)
&":"&ADDRESS((MATCH("Kevin",$A:$A,0)-1),100,1,1))))
As far as I can tell, the formula works just fine. If you look in the Name Manager and check on that Name, the highlighted box shows up exactly what it should and if you do a simple MAX test, it displays the correct MAX value from that range.
The problem comes in when I try and add it to a chart. Instead of a displaying all the values in the range, it displays nothing. Doesn't flag up any errors, just nothing.
The reason I chose to do it this way is that the table contents could change on a daily basis and so could the position of the row and I don't want to have to keep changing the references in the graph so make sure the right data is being displayed. Is it just that charts don't play well with the INDIRECT function?
I know this is probably very easy, but it sure has me puzzled: I have an Index & Match formula (G4) to extract the first set of data from the Sales Info, and then link (+) the Table's month & year to the drop downs, but I need the next 11 rows to automatically fill in for a 12 month summary.
View 8 Replies View RelatedI use the standard OFFSET-COUNT-MATCH method to create dynamic named ranges in my Excel projects. Needless to say, this method won't work on a spreadsheet with formulas extending beyond the current range. The count function counts the cells containing formulas, even though they may contain no data. Does anyone know how to construct a formula that will IGNORE the "formula only" cells??
View 3 Replies View RelatedI have a base document that i can import another data document with a button (this is working).
I then have another WS ("search") in the base document with lots of identifiers which I want to use as my search range to look through the document that I just imported (column A).
I need a msg to ask the user what month they would like to find the $ value on (Ie, January) in the imported WS... this way it doesnt copy the entire line only cell in the selected month column.
Then I want to the user to be able to click a button that will check through the identifiers on the "search" WS and if the same identifier appears in the imported WS in column A, then for the $ value in the column selected to be copied to the search Range work sheet.
If the idenfifier is not matched then in place of the $ value copied can be the string "no in XXX WS" .
I have attached the document with dummy data in each work sheet with details more cleary what I have meantion above.
I have a large database of equipment on one sheet and an input form on another. For inventory control, when a user scans a number into the input form, the main inventory sheet is updated with the current location. I have it working using functions, but I need to do this in VBA. I am looking to do the following;
User enters 2222 on the input form. The code matches 2222 on the inventory sheet, moves the activecell 10 columns and updates a value in that cell. Cell A2343 is "2222" then Cell K2343 is changed to "WAREHOUSE 4". What is the best way to find the match and then select that cell in VBA?
I'm working on the second part of the spreadsheet which will be a separate macro, and I have to admit I'm pretty much way over my head with this one. I'm attaching the spreadsheet for clarity.
What I'm doing is using the first macro to create a set of charts on Sheet2. From those charts I make a note of the start and end points of each 'hump' that shows up from the data. There are two 'humps' that come from each column. I record the start and end points (these refer to the column numbered sequentially, 0 to 749) in Sheet3 in the appropriately marked cells, and from these numbers I calculate how many points of data will need to be copied over (this is the information NEXT to the cells I just mentioned). I also have a formula in Sheet3 that I set up and paste across the rows, parts of which change depending on how many rows of data from a column get pasted over from Sheet1.
I'm trying to make two identical worksheets in a workbook. I would like the second sheet reflect all the changes made in the first one. I thought I would simply use = but it doesn't work correctly if I add or delete rows. If I add a row between row 1 and 2 in the first sheet the formula in row 2 in the second worksheet changes from =sheet1!A2 to =sheet1!A3. The result is the same if I use absolute references which suprised me. I want the formula in row 2 to stay =sheet1!A2 whatever happens on the first sheet.
I don't care about formatting, just data are important.
The reason I want the same data on two worksheets is that the second sheet will contain some more data that should not be visible to everyone. I want to protect the second worksheet and require a password to unhide it.