Dynamic Range In Graph

Apr 28, 2008

I have a table that has formulas that read off a pivot table. When the pivot table is updated, the other non-pivot table is updated. I created a graph off of the non-pivot table data. I want to do a bar chart, but if data is added to the pivot table (and then through formulas added to my non-pivot table) I want the graph to automatically update with the new fields. I can't figure out how to do this

For example, if my table had Grapes, apples and peaches and their quantities in cell A2:b4 if I choose range a2:b5 I don't get any data in my graph at all, if I choose the correct range a2:b4, I get a bar chart with Grapes, Apples and Peaches and thier quantites. If I added Strawberries to the Pivot table, the non-pivot table would update, but the graph is not grabbing row 5, I have to manually change the range to a2:b5.

View 9 Replies


ADVERTISEMENT

Graph Needing Range Adjustments Dynamic

May 9, 2008

i have a graph that i've linked to let's say cells A1:C150

however, my range could sometimes needs to be shrunken to A1:A100 or A1:A40 etc. (the number of rows that are "active" is determined by cell K27)

i'd like for my graph to automatically adjust depending on the number of rows that are filled within the range above. can this be done with formulas and graph manipulations?

i've put in a formula currently that makes the value of the cells that would return 0 into "" but that doesn't seem to do the trick.

View 9 Replies View Related

Dynamic Graph

Jul 28, 2008

I have a sheet that has names in column A and a list of subjects in Row 1. Cells B2:BA25 have the scores acheived for each person in each subject. I was thinking of creating a customisable graph where by there would be a dropdown box that could select a persons name and this would populate a bar graph of all that persons scores.

View 9 Replies View Related

Dynamic Series For A Graph

Jun 30, 2014

I have a graph that auto updates but sometimes there is only 1 series and sometimes there is 2,3,4, or 5 series. Is there a way to have the graph update accordingly? and only have have the series that are valid be in the key on the graph. Currently the graph keeps all the series in the key even when there isn't any data for it.

Please see attachment. Use sheet 2 for the graph. and use the drop down menu to select catagory. this ia very quick mock up of the concept.

Graphseries.xlsx

View 4 Replies View Related

Dynamic Graph Based On Listbox

Jan 13, 2014

I am making a dynamic graph with use of listboxes. Please see attached example.

In the example doc is a graph which is now static. Based on the rows I selected in the table, for store 1 and for february.
What I'd like is that a user can select a store and a month in 2 listboxes and that the graph is dynamically created based on dynamic selection in the table. I think I need to use the OFFSET function and some defined names but I'm not sure how.

Example.xlsx‎

View 3 Replies View Related

Dynamic Weekly Graph To Run From Monday To Sunday?

Oct 3, 2011

Is there a way to create a dynamic chart to automatically run from the most recent Monday to Sunday. So on Monday the entire chart will reset?

View 9 Replies View Related

Dynamic Chart/Graph For Changing Ranges

Apr 25, 2008

I have a database in excel with a lot of tables in which lets a uses a combo box so the user select can view just one table.

I want to be able to create a macro so when a button is pressed, it copies the data into a new workbook and creates a chart so they can do whatever they want without disrupting anything in the original workbook.

I have been able to find code that will export the data and create a chart (see below) but the problem is the range changes from table to table so I need to find a way of changing how the chart picks up the data range.

Sub Chart_New_Book()

Sheets("Temp").Select
Cells.Select
Selection.Copy
Workbooks.Add
ActiveSheet.Paste
Range("A1").Select
Charts.Add
ActiveChart.ChartType = xlColumnClustered
ActiveChart.SetSourceData Source:=Sheets("Sheet1").Range("A1:C10")
ActiveChart.Location Where:=xlLocationAsObject, Name:="Sheet1"
End Sub

So at the moment when charting ony cells A1:C10 will be plotted no matter what the size of the table is and making the target range bigger only sees the blank cells being plotted.

View 3 Replies View Related

Popup Form Linked To Dynamic Graph

Aug 6, 2008

This may be a tough one. Through a button, I am trying to create a popup window displaying an excel chart, viewed always on top, dynamically linked to my spreadsheet data. The idea would be to see it evolve as I input data, and be able to open as many as I want. I guess I could create a macro to paste/clear the graph, but a pop up window would appear more professional and more user friendly.

View 2 Replies View Related

Excel 2007 :: Counting Dates Then Creating Dynamic Graph

Jul 24, 2014

What I have done is entered code to auto generate the date in column O whenever data is entered or altered in column A. Here is that code:

VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("A:A")) Is Nothing Then _
Target.Offset(0, 14).Value = Now

End If
End Sub

What I am trying to do now, is create a column that will take the information from O and do a sort of COUNTIF function that will count how many items of data were entered on a certain date by the day. For a clearer example, I want it to tell me how many items were entered/altered on 7/23. But I also want it to continuously calculate it for each date after that. Preferably automatically, but if a macro is needed I can create an update button.

Once it can achieve that I would like to create a dynamic graph that will automatically (or via macro button) update to show the last 5 days. It should display the date and how many items were entered that day.

I am using Office 2007.

View 1 Replies View Related

Excel 2010 :: Dynamic Graph Creation Using The Series And Offset Functions?

Jan 7, 2014

I am in the process of setting up some graphs. The graphs will show the last 6 months of data so they move as each month is goes. I saw a slick way of doing this using the count function but this did not quite fulfill my needs. What I was looking for is to be able to input the start month in a cell. The cell would be part of the function within the formula. I created a simplified version of the spreadsheet below.

Spreadsheet.jpg

Then I created my names using the ctrl-F3

Names.jpg

I then created the graph I wanted and wanted to use the formula =SERIES(Sheet1!$B$3,!chtCat,!chtIssuesReported,1). This kept getting an error indicated nothing really. It basically says there is something wrong with my Series function. I have a working version of a similiar worksheet I have been basing my entries on. They look almost identical but mine is failing. I also created a new file and tried this and it still fails. I can run the formula evaluator within Excel 2010 against the !chtCat and !chtIssuesReported names and they both return the correct value (which equals areas on the spreadsheet). I have also tried to enter the spreadsheet name and a tab in front of the names to get them to work and still get an error. Basicall I am trying to create the graph below (this grpah is using the hard coded locations)

Graph.jpg

View 2 Replies View Related

Create Dynamic Line Graph Using Week And Year Numbers Stated In Another Sheet?

Apr 7, 2014

I want to create a dynamic line graph using week and year numbers stated in another sheet.

e.g.

Start Year - 2012
End Year - 2014

Start Week - 3
End Week - 12

The top 2 rows above my graph data are as below:

Year - 2012 2012 2012
Week - 5 6 7 etc.

This works fine if the start and end year are the same but if it's greater than one year, it doesn't recognise that.

View 7 Replies View Related

How To Name A Dynamic Range & Make A Validation List (of 2 Dynamic Ranges)

Dec 22, 2009

I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.

Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?

i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both

View 9 Replies View Related

Stop Graph From Changing Named Range To Formula Range

Sep 8, 2006

I am trying to create a graph for a range of data that updates monthly (adding an extra month each time). I wanted the graph source data to update automatically each time the data is refreshed so used an OFFSET formula to identify a named range. I then point the graph to the named range as the source data.

When I enter the range as the source data the graph picks it up. However, when I re-enter the source data option on the graph it has converted the named range into a cell written range (ie. replaces "=QUALITY" with "='Front page'!$B$7:$J$10" - which therefore will not update when the range increases.

View 4 Replies View Related

Graph - Expandable Range

Feb 1, 2010

i have a range (A2:A30) that has values imported into it (sheet1).
in B2:B30, i'm doing a simple calculation based on the perspective values in A.
The number of values imported into A is different each time my model is run.

i'd like to graph A and B columns against each other but i don't want to have to adjust the range on the graph each time the model is run.

ps. i tried graphing A2:A30 vs. B2:B30 but the graph also shows the empty cells in A so that doesn't work.

View 9 Replies View Related

Data Labels On Xy Graph From Range

Oct 16, 2009

Is it possible to plot an xy scatter graph of "Result A" versus "Result B", and have the data points labelled with the values under "Mix" ?

Mix Result AResult B
1340.543 0.520
1360.562 0.525
1380.570 0.526
1400.561 0.528
1410.559 0.526
1420.568 0.526
1440.570 0.526
1460.578 0.526
1470.579 0.530
1480.575 0.529

View 2 Replies View Related

VBA To Update Graph Data Range

May 13, 2014

I have a report that has rolling week by week data (as in YTD). The graphs I have are based on a 13 week period. As I add a week (done by VBA import) I want to update graphs to lastest 13 weeks as in last 13 columns of data on data sheet.

View 4 Replies View Related

Graph Based On Changing Range

Sep 4, 2006

I am trying to automate a graph for data that is not always the same amount but always in the same format. I have attached a spreadsheet that has an example of the data.

Columns B, D, & E are the ones that I am interested in charting in a line with markers type graph, but the rows may be 100 for one set of data and 1000 rows for another set of data. I am trying to get the macro to open a new worksheet and as part of the macro create a userform that will ask for the text information on the top of the worksheet (as this is not always correct when imported).

View 5 Replies View Related

Dynamic Named Range Sort Including Cells Outside Defined Range

Apr 3, 2008

Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:

=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)

When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....

View 9 Replies View Related

Creating Named Range Taking Avg To Date Of Dynamic Range

Jul 15, 2014

I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.

View 1 Replies View Related

Dynamic Range For Pivot Table :: Error : Range Is Invalid

Oct 28, 2009

I am trying to get to grips with the dynamic ranges for pivot tables. I have named a range data and in the refers to section put:

=OFFSET(Sheet2!A1,0,0,COUNTA(Sheet2!A:A),COUNTA(Sheet2!1:1))

I was hoping that then when i go to data > Pivot table and it asks for the range i could put =Data but it tells me that the range is invalid. I have attached a copy at the bottom.

View 3 Replies View Related

Select Variable Data Range For Graph

Jul 23, 2008

I need to select data from columns A, B and I for the graph. I have the below code but get an error message. Can anybody help ?

Set cellGR1 = Cells(2, 1)
Set cellGR2 = Cells(K, 2)
Set cellGR3 = Cells(2, 10)
Set cellGR4 = Cells(K, 10)

Charts.Add ....

View 9 Replies View Related

Auto-Extending Graph/Chart Range

Aug 21, 2008

I have a Line Graph with 2 lines on it. Is it possible to write a macro to extend the range (Source range) of one of the lines ? I would also like to add a Data Label to the newly added point.

For e.g. If I have Line 1 graph only till 65, I want the macro to extend the range by one row to include 95 and also display a datalabel ......

View 9 Replies View Related

Chart/Graph Changing/Variable Range

May 28, 2008

I have a vast database where I have linked charts. I send the data from a macro to the database and sometimes there are 1000 inputs and sometimes there are only 20.
How would i set up my charts to only graph the inputs that are present?

View 7 Replies View Related

Convert Dynamic Range To Static Named Range

Sep 13, 2007

My searches have not produced anything that I could apply to this situation.

I'm trying to write VBA that would:

1. Search a Workbook for Dynamic Ranges.

2. When a Dynamic Range is found the code would:

A. Determine the current coordinates for the range.
B. Change the "Refers To" value From "=OFFSET...." To "=Worksheet_Name $Column$Row:$Column$Row"

3. Save Changes.

4. Close File.

My apologies but I have very little experience in writing VBA. I understand about variables, arguments, and IF/THEN but just enough to use functions within Excel.

View 9 Replies View Related

Create Graph Of Date Hits Using Weekly Range?

Aug 5, 2013

I'm trying to create a line graph to show the trends of usage. I have a list of dates that I pulled from a website. I am trying to create a function that will count the number of dates between, for example, 8/5/2013 and 8/11/2013.

I had tried using this function to create a set of weekly ranges. =TEXT(DATE(2013, 1, 7)+(ROW(2:2)-1)*7, "m/d/yyyy h:mm AM/PM")&"-"&TEXT(DATE(2013, 1, 7)+(ROW(2:2)-1)*7+6,"m/d/yyyy h:mm AM/PM")

It correctly displays the date ranges, however when using this function:
=COUNTIF($E$2:$E$305, A2) Nothing gets pulled.

Here is one of the dates that has been pulled for example: 8/5/2013 11:10:00 AM

View 5 Replies View Related

Dynamic Range 2003: Run Calculations On This Range

Nov 5, 2009

I have a range of data that will grow as the days of the month pass but I need to run calculations on this range. The data is 13 columns wide but the number of rows will increase daily. I remember using a formula in the Define Range that would automatically take into account new additions using the OFFSET function but cannot for the life of me think how exactly to do it.

View 4 Replies View Related

Dynamic Range Used Named Cell Range

Jul 7, 2014

Line of code that will Select a Named Range in this case I have Named a CELL "DataSummary" Need to use that named range by selecting 30 columns and 54 rows.

Range("DataSummary),(??,??) doesn't work.

View 1 Replies View Related

Set Range Variable To Growing Dynamic Range

Mar 6, 2008

I have been working on part of the code for my spreadsheet and it works fine in the spreadsheet “Databaseform” however when I copied the code to my master spreadsheet “Paul_PartLocDBCombo” it does not work, I get the error:

Method ‘ range’ of object ‘_worksheet’ failed
The code is then highlighted in yellow, the code is:
Set rng = wksPartsData.Range("a1", Range("a65536").End(xlUp))

Meaning this part is incorrect but I don’t know why? To work it: go to Databaseform and press start. Enter 7mm in the product field and press find all. It will then return all the matching results in the userform. Its this I want to try and achieve on the other spreadsheet when the button find label is pressed.

View 3 Replies View Related

Make A Scatter Graph That Will Graph The Attached?

Mar 21, 2014

I would like to make a scatter graph that will graph the attached. The score would be on the Y axis and the birth date would be on the X axis. This is simple to do by itself but what I would like to do in addition to this is to have the top 25% of the scores a single color, the middle 50% of the scores a second color and then the bottom 25% of the scores to be a third color. And if it is possible to have the ID visible when you move your cursor over a given dot in the graph. Currently when I make a scatter graph the X,Y coordinates show when I hoover the cursor over a dot.

View 7 Replies View Related

Make A Graph That Will Graph Against Time

Jun 11, 2006

How can i make a graph that will graph against time? lets say i have a bank balance like this:

1/2/2000 $500
1/3/2000 $600
3/12/2000 $400

there may be more than one entry on any one given day, or there may not be an entry for 2 weeks. How can i graph the running balance in a way that it will show the timeline just as a calendar year(or however long i selected) and the points are plotting according to their date, not just equally spaced out.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved