I am looking to Set an object as a Array, but i keep getting an error, and the book i have does not really go into Set Functions that much, so not sure if it can be done or not?
For d = 1 To 31 ' days in the month
Set Rng(d) = Range(sRng & ":" & eRng)
Next d
sRng andn eRng are already set by date, and I have Dim Rng() As Range at the top.
Can a Set function have a Array in it?
I have a userform with a ListBox and I'm trying to refer to each particular item in the Listbox for a range but it doesn't work.
[Code] .....
I have filtered a list, defined a range of the visible cells. Now I want to loop thru the range and process each cell. In the process I have to refer to the next visible cell. How can I achive this? both .Offset and .Item result in the next none-visible cell.
View 3 Replies View RelatedI know I've asked before but I can neither find my previous question or the answer.
So, once again.... is it possible to refer to a named range in a CSE array formula?
I know how I would type a formula that way -- but I would be happy to see an example.
Most importantly, will it always work? Or are there pitfalls and dangers?
Using Excel 2013,
It trying to see if the Month() of a date is in a Array / Range
I tried =IF(MONTH(E8)={2,6,9,11},"Yes","No") where E8 = 9/30/12
I'm trying to use arrays in a macro!
Here's my
Sub ArrayTest()
'
' ArrayTest Macro
'
Dim Array1() As Variant, Array2() As Variant
Dim R As Integer, ilR1 As Integer, iLR2 As Integer
ilR1 = Cells(Rows.Count, 1).End(xlUp).Row
iLR2 = Cells(Rows.Count, 7).End(xlUp).Row
ReDim Array1(1 To ilR1)
ReDim Array2(1 To iLR2)
For R = 1 To ilR1
Array1(R) = Cells(R, 1) & Cells(R, 2) & Cells(R, 3)
Next R
For R = 1 To iLR2
Array2(R) = Cells(R, 7) & Cells(R, 8) & Cells(R, 9)
Next R
For R = 2 To UBound(Array1)
If WorksheetFunction.CountIf(?????, Array1(R)) > 0 Then Cells(R, 4) = "old" Else Cells(R, 4) = "new"
Next R
'
End Sub
Basically, the macro concatenates the content of three columns from two different tables into two arrays. Array1 contains the current stuff and Array2, the old one. If I CountIf items from Array1 into the content of Array2, I should get what's new (count 0).
Now, ? in the code should refer to the content of Array2. How do I do that?
The errors I get are 424 object required [Array(iLR2)], 1004 method 'Range' of object '_Global' failed [Range(Array2) or Range(Array2(2), Array2(iLR2))], or type mismatched [Array2].
I have a table, which has pairs, e.g like this:
A=1
B=2
etc
how to give the value to variable based on this pairs? I mean something like this:
If left(mystring;1)=A, then
myvar=1
I used the case-structure, but maybe there is a better solution, which can use an array in order not to write all of the items whenever I need it.
Is there a vb code to remove single item from an array by specifying the index. for example, MyArray ("A", "B", "C", "D"). If I want to remove "C" from the array, is it possible to somehow remove it by refering to it by its index (2). Does 'RemoveItem' command only work for a ListBox?
View 9 Replies View RelatedI am working with a friend on their spreadhseet which uses several vlookups in order to pull information cells in one worksheet to another, and also to pull object types from a list with values saved as an array. However, one item in the array consistently does not appear.
I noticed that his array has 4 columns, unsorted, where I would have used 2 (one with the object type, and the second with the value corresponding to that object type) and then sorted them.
The error he gets is "A value is not available to the formula or function", even though the value is in the array.
I have already eliminated formatting, spelling errors, bad formula (it works for the other types), and all I can come back to is the array.
The file is too large to attach, so I am attaching some description of the formulas and the structure of the array.
I want to know all times this one presents the number 3 in the last 10 cells of the A column
For a static range I use this function
= COUNTIF(OFFSET(A16;-10;0;COUNT(A:A));3)
If I add a new cell which is the function for a dynamic range?
I can refer to the cell with this function = ADDRESS(MATCH(300;A:A);1)
but not as integrate it.
Dim k as string
K = "sheet1"
Sheets(k).select
This is the code 'm using
I am trying to find an item within an array and then VBA could execute code.
Here is an example:
[Code]....
LookupItems =("text", "value", "book") or should I acutally be using Split("text,value,book",",")
For Each sht in ThisWorkbook
If sht.name = array(LookupItems) Then.....execute code
[Code] ....
So basically in this example I want to loop through all the sheet names in the workbook and if any of the names in the arrary are found it will execute the code for those particular sheet names.
I know alternatives are the select case or write an if statement for each value I am looking up or even use an OR for each value to lookup; but I just wanted to see if this method was even possible as it would be less coding.
I've got a problem referring to a named range in another worksheet.
Private Sub test()
Dim var_StartWeek As String ' 0740 This is the value I make a lookup for
Dim var StartWeekNr As Integer ' 40 and get this as a result
'*** Here is the named range in another worksheet (It doesn't work)
Set rng = ActiveWorkbook.Names("WeekData2").RefersToRange
var_StartWeekNr = WorksheetFunction.HLookup(var_StartWeek, Range("rng.Value"), 4) ' I'm doing something wrong here...
'*** If I have the named range in the same worksheeet it works fine
'var_StartWeekNr = WorksheetFunction.HLookup(var_StartWeek, ActiveSheet.Range("WeekData"), 4)
I am looking for a way to delete all the range names in a worksheet, not the whole workbook. I have found several procedures that will delete all the names in an activeworkbook. For some reason it takes too long to run. Does anyone know how to handle a single sheet in VBA?
View 6 Replies View RelatedI put all my named ranges in a seperate worksheet in the workbook.
On a different sheet I have all my data with references to the named ranges. But what it gives me is the cell information from the sheet on which the named range is located and not on the worksheet where I actually need the calculations to be done.
How can I make the named range refer to the cells in the worksheet in which it sits?
Worksheet 1
---------------
1
2
3
4
Worksheet 2
--------------
I name the function Red apples
RedApples =CONCATENATE($A1&"Red Apples")
Worksheet 3
--------------
=RedApples
=RedApples
=RedApples
Question #1
How do I make the name reference in worksheet 2 refer to
the cells located in the worksheet in which i use it. In other words, when I use RedApples in Worksheet 3, it gives me what is sitting in A1 in worksheet 2 instead of in A1 on Worksheet 1.
Question #2
How do I make the name reference in Worksheet 3 keep stepping down along Column A in Worksheet 1?
Formula at issue in actuality is
=IF($S5>0.149,Morethan15,IF(AND($S5<0.15,$S5>0.999 ),Morethan10,IF(AND($S5<0.999,$S5>0.0499),Morethan 5,IF(AND($S5<0.05,$S5>0),Morethan0,IF($S5<0,Lessth an0)))))
the morethan15,10,5,0 and lessthan0 is defined in the last worksheet
I'm trying to automatically add and remove one criterion from an autofilter without disturbing the previous existing criteria The autofilter code sounds like this:
Code:
ActiveSheet.Range("$A$1:$L$47").AutoFilter Field:=6, Criteria1:=Array( _
"Clay", "Grass"), Operator:=xlFilterValues
How would I go about referring to this array and adding another item called "Hard" to any pre-existing elements in this array?
I plan on attaching this code to a button and use it as a filter, so when the button is pressed, the item will be added to the list of criteria, and if it is "un-pressed" the item will be removed.
I want to know how to copy a range into an array then an array back into an range.
Code:
Dim a(3,3) As Double
a(3,3) = Range("C3:E5")
Range("C10:E12") = a(3,3)
I use macros to print pages, depending on the number of entries I have. If I have 1500 entries, I have to have 1500 If statements. Is there a way to write VBA in a macro to where I can refer to a cell and use the value of that cell to print the range.
View 5 Replies View RelatedI'd like an if function to display "Yes" when a postcode is found within a range of postcodes.
For example if I have BT23 4RE in cell b1 and a range of postcodes from say cell a1:a76 which has BT23 4RE in it, it will display yes.
In the attached workbook, I have identical sets of data in column A separated by an blank cell. I need a macro for the user form that i need to build. The code needs to find the end of each named range, (Range1,Range2 and Range3), to insert blank row at the end of each range and to copy the value of the textbox from the user form in each row so to keep the sets of data identical.
View 9 Replies View RelatedI'm trying to add items to a Combobox on a Userform dynamically when the form loads - the criteria is if a cell value is greater than zero, the value being calculated by a formula within the cell.
Code:
If Sheet5.Range("B58").Text >= "0" Then
.AddItem "Target"
End If
Excel Userform
VB:
'enables user to click [U]highlight and select[/U] an item in ListBox1 and ListBox2 item (same row in index) is also [U]highlighted[/U] (highlighted only not selected)
Private Sub ListBox1_Click()
ListBox2.ListIndex = ListBox1.ListIndex
End Sub
Question: Is it also possible to enable a user to click to select an item in ListBox1 and ListBox2 item is also selected simultaneously (same row in index). Is there excel vb code to do this?
I think the code may be along the lines of the ListBox SelectedIndex property. What would be the Excel VB code equivilant for the ListBox SelectedIndex property, if so?
Is it possible that, once filtered, you can count the amount a filled in cells in a column range...BUT! These cells are ID numbers for stocks, so CAN contain duplicates which represent accounts, Therefore, any duplicate will be counted as 1...
eg
12345325
12345325
435ghfdhy
5464OKff
SEDDONF4
[Code]...
As we can see here there are 14 lines of data but only 7 make up the dataset
so if X was the variable assigned to this it would = 7
Is this possible, in a loop or some sort, Would VBA hold all the Instances in its memory???
ERROR#9 OUT:
I have a named range on a hidden sheet which populates data validation lists on 'sheet 1, cells b5-b55. My question is this...Is it possible to, upon entering a new item in b5 (for example), to have that item automatically added to the named range? (preferably through a button on a pop up form that opens w/ the question 'would you like to add to the list?, similar to an access form)...I've seen one example in the past which I found with a link from this site, but couldn't make it work. If the answer to my question is yes, could you also suggest a location of an example if you know of one?
View 14 Replies View RelatedHow many time each item appear in specific range.
For example:
apple
banana
grape
apple
mangosten
orange
banana
banana
mangosten
In that list we should get :
apple=2
banana=3
grape=1
apple=2
mangosten=2
orange=1
banana=3
banana=3
mangosten=2
If I am using =COUNTIF(F6:F14,"apple") then I can get the result of apple.. and just keep changing underlined word but if then i have so many data, i cant do that.
I wish to compare each item (4-8 digit alphanumeric ID) in a list in column B of worksheet 1 (Portfolio) to all of the items in column B of worksheet 3 (EssBase Cap). The data (ID) in column B of 'EssBase Cap'! is concatenated with its description so my code needs to strip off the leading zeros and everything after "-" in order to do the comparison. Once a match is found it should copy the corresponding values in 'EssBase Cap'! for that row, column D and E to 'Portfolio' Column J, and K. I have created some pseudo code and need to translate this to Excel VBA
Dim IBSPWD As String
Dim ProjectPCN As String
Dim Pos As Integer
Dim I As Integer
Dim J As Integer
For I = 3 To 'to end of range ? WHat is the code to find end of the range IE no more data?
For J = 6 'to end of range ? The nested for loop will check each item in Portfollio and compare it to each item in Essbase Cap
IBSPWD = 'EssBase Cap'!Cell(J,"B") 'fill in the string with data
Pos = InStr(1, IBSPWD, "-", vbTextCompare) 'find length of the string befor "-"...............................
I have a list of country names in a listbox that are populated using another worksheet that has these country names. When I make a selection in the listbox, I want the same country names to be highlighted in the worksheet. I will then be able to run a macro that takes those selected cells as input.
View 3 Replies View RelatedIs it possible that, once filtered, you can count the amount a filled in cells in a column range...BUT! These cells are ID numbers for stocks, so CAN contain duplicates which represent accounts, Therefore, any duplicate will be counted as 1...
eg
12345325
12345325
435ghfdhy
5464OKff
SEDDONF4
4455ONHIG
4455ONHIG
4455ONHIG
4455ONHIG
4455ONHIG
234234
66555556
66555556
66555556
As we can see here there are 14 lines of data but only 7 make up the dataset
so if X was the variable assigned to this it would = 7
Is this possible, in a loop or some sort, Would VBA hold all the Instances in its memory?
I have the following formula which doesn't work:
=COUNTIF(LEFT(proposedenter,7),LEFT(F127,7))
proposedenter is just a named range. I can see this is wrong but how do I base the count criteria on the left 7 characters of an item that is matched in the range?
numberdesc
1_______yellow
1_______yellow
1_______blue
2_______purple
2_______purple
3_______green
3_______orange
4_______black
I need some way that can identify when the item in the description column doesnt match the first item of the same number- for example, here the 1-blue and 3-orange would be flagged because they should match the 1-yellow and 3-green.
I need to do this on a much larger scale (approximately 20,000 data points), so I wanted to create a formula or macro that could do this for me.. I thought making a reference page with would work but I keep getting an error.. I haven't done VBA in a while, so I may have syntax errors.
If Range("A2:A9").Sheets("Sheet1") = Range("A2:A6").Sheets("Ref") And Range("B2:B9").Sheets("Sheet1") = Range("B2:B6").Sheets("Ref") Then
Range("C2:C9").Sheets("Sheet1") = "x"
End If
