I want to know all times this one presents the number 3 in the last 10 cells of the A column
For a static range I use this function
= COUNTIF(OFFSET(A16;-10;0;COUNT(A:A));3)
If I add a new cell which is the function for a dynamic range?
I can refer to the cell with this function = ADDRESS(MATCH(300;A:A);1)
but not as integrate it.
I use macros to print pages, depending on the number of entries I have. If I have 1500 entries, I have to have 1500 If statements. Is there a way to write VBA in a macro to where I can refer to a cell and use the value of that cell to print the range.
View 5 Replies View RelatedI have a userform with a ListBox and I'm trying to refer to each particular item in the Listbox for a range but it doesn't work.
[Code] .....
Dim k as string
K = "sheet1"
Sheets(k).select
This is the code 'm using
I am looking to Set an object as a Array, but i keep getting an error, and the book i have does not really go into Set Functions that much, so not sure if it can be done or not?
For d = 1 To 31 ' days in the month
Set Rng(d) = Range(sRng & ":" & eRng)
Next d
sRng andn eRng are already set by date, and I have Dim Rng() As Range at the top.
Can a Set function have a Array in it?
I know I've asked before but I can neither find my previous question or the answer.
So, once again.... is it possible to refer to a named range in a CSE array formula?
I know how I would type a formula that way -- but I would be happy to see an example.
Most importantly, will it always work? Or are there pitfalls and dangers?
I've got a problem referring to a named range in another worksheet.
Private Sub test()
Dim var_StartWeek As String ' 0740 This is the value I make a lookup for
Dim var StartWeekNr As Integer ' 40 and get this as a result
'*** Here is the named range in another worksheet (It doesn't work)
Set rng = ActiveWorkbook.Names("WeekData2").RefersToRange
var_StartWeekNr = WorksheetFunction.HLookup(var_StartWeek, Range("rng.Value"), 4) ' I'm doing something wrong here...
'*** If I have the named range in the same worksheeet it works fine
'var_StartWeekNr = WorksheetFunction.HLookup(var_StartWeek, ActiveSheet.Range("WeekData"), 4)
I am looking for a way to delete all the range names in a worksheet, not the whole workbook. I have found several procedures that will delete all the names in an activeworkbook. For some reason it takes too long to run. Does anyone know how to handle a single sheet in VBA?
View 6 Replies View RelatedI put all my named ranges in a seperate worksheet in the workbook.
On a different sheet I have all my data with references to the named ranges. But what it gives me is the cell information from the sheet on which the named range is located and not on the worksheet where I actually need the calculations to be done.
How can I make the named range refer to the cells in the worksheet in which it sits?
Worksheet 1
---------------
1
2
3
4
Worksheet 2
--------------
I name the function Red apples
RedApples =CONCATENATE($A1&"Red Apples")
Worksheet 3
--------------
=RedApples
=RedApples
=RedApples
Question #1
How do I make the name reference in worksheet 2 refer to
the cells located in the worksheet in which i use it. In other words, when I use RedApples in Worksheet 3, it gives me what is sitting in A1 in worksheet 2 instead of in A1 on Worksheet 1.
Question #2
How do I make the name reference in Worksheet 3 keep stepping down along Column A in Worksheet 1?
Formula at issue in actuality is
=IF($S5>0.149,Morethan15,IF(AND($S5<0.15,$S5>0.999 ),Morethan10,IF(AND($S5<0.999,$S5>0.0499),Morethan 5,IF(AND($S5<0.05,$S5>0),Morethan0,IF($S5<0,Lessth an0)))))
the morethan15,10,5,0 and lessthan0 is defined in the last worksheet
I have filtered a list, defined a range of the visible cells. Now I want to loop thru the range and process each cell. In the process I have to refer to the next visible cell. How can I achive this? both .Offset and .Item result in the next none-visible cell.
View 3 Replies View RelatedLine of code that will Select a Named Range in this case I have Named a CELL "DataSummary" Need to use that named range by selecting 30 columns and 54 rows.
Range("DataSummary),(??,??) doesn't work.
I need to create a dynamic range based on cell between a header and footer cell. The header cell ( A8 ) will remain static, however, the footer cell starts at A10 and then will move down as rows are added.
View 9 Replies View RelatedI want to use the offset function in a named range to be the data source for a column of sparklines, I want the sparkline to grow incrementally as data is updated per month.
The data in the table I want to add sparkline to is pre-calculated with SUMIFS formulae, and updated monthly from a dump of detailed data. I am trying to automate this as much as possible, and have pre-calculated future performance data in the table. I used an IFERROR to return a hyphen for the future reporting months.
The problem is, the sparkline is reading the hyphen as zero value, and the sparkline is showing as if it was reporting data to the end of the reporting period.
So my question is - is there a better IFERROR option that wouldn't be read as data, or is there a way to define the range by date compared to a data date?
I have a example. I have 4 columns. first 3 columns ID, C1, C2 have the input data. Under a ID we have multiple number of rows. In this example we have 4 rows for ID1. But in real time it can be any number of rows under a single ID. When I click a button the values under ID 1 should get concatenated and stored under the Concatenate column.
I tried some macros but i cant get the logic behind finding the dynamically changing row counts under single ID.
ID
C1
C2
Concatenate
[Code].......
I found dynamic range name across columns:
=OFFSET($A$1,0,0, COUNTA($A:$A),COUNTA($1:$1))
which expands across Columns in Row 1.
What if we don’t know range to be named in which row or column starts?
What will be a formula (assume range starts on cell named “BegRng”)?
I would like to create a dynamic range of numeric type in a single column. Only the precise position of one middle cell is known, let's say $A$20, but the range is supposed to extend above and below $A$20 and to finally include all adjunctive, positive and negative numbers in that very column.
Having read the ozgrid-resources on dynamic ranges let me experiment with the following line, however, it seems to include all entries in the column disregarding the format type or the fact that they should all be adjunctive (meaning that wherever there's a text entry it should be seen as the natural end of it): ....
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
In the attached spreadsheet I am trying to always reference the sum column from Qty in Det Est.
This is because the number of roads changes for each project.
I created a dynamic range name surfacing with the following formula:
=offset(qty!$a$1,0,0,counta(qty!$A$A), counta(qty!$1$1)).
My question is what formula do I use to reference the sum column for each row on the Det Est Sheet.
In my macro, NextRow is defined as the first empty row in a set of data (NextRow = Range("A1000").End(xlUp).Row + 1). How would I clear the contents of Columns A:H in NextRow in VBA, keeping in mind that NextRow is always different for each worksheet I'm working with?
View 2 Replies View RelatedCan you use Row & Column numbers in a Formula the way you can in VBA?
I want to do the same as Range(Cells(5,2)) in VBA EXCEPT in a Formula
because I want to use named ranges for the Row & column entries. (And I don't want to have to run a macro every time a change is made. The spreadsheet is huge enough already. It's slow on my machine & I have the biggets baddest PC in the company!)
Using Formulas only, (not VBA) I would like to create a Dynamic Named Range, LastUsedRow, which is the ROW NUMBER of the Last Used Cell in Column C
(it would = 470)
Also I have an existing Named Range HeaderRowNum (it = 16)
Currently I have a LOT of formulas like:
=SUMPRODUCT(($E17:$E470)*(--(CO17:CO470>0)))
problem is any new data must be added between Rows 17 & 470
So I would like to create dynamic new forumlas to read like:
SUMPRODUCT( (Cells(HeaderRowNum+1,5) : (LastUsed Row,5)) * (--(Cells(HeaderRowNum+1,93) : (LastUsed Row,93))>0) )...............
I have a spreadsheet where I've disallowed selection of multiple cells using the code in the 2nd box below, but is there a way to override this protection to allow selection of a named range? My reason for doing so is to open this workbook as read only from code in another workbook and copy the entire table. My code for doing that works ok (I frequently use it in other workbooks) but, in this case, my need to disallow selection of multiple cells in this particular worksheet is tripping me up.
This is the code I'm using to try and pull the data into another workbook:
Code:
Workbooks.Open Filename:=ThisWorkbook.Path & "RSL-Jobs-Register.xls", ReadOnly:=True
Application.GoTo Reference:="JobsTable"
Selection.Copy
and this is the code I have in RSL-Jobs-Register.xls which is preventing me from selecting the (dynamic) named range called "JobsTable".
Code:
''' I'm thinking I could have something here like (in plain English) "If selected range "JobsTable" Then"
''' (apply the code below) but I'm not sure of the code
If Selection.Cells.Count > 1 Then
MsgBox "Sorry, operations on multiple selections aren't allowed here", vbCritical
ActiveCell.Select
Exit Sub
End If
The formula for the dynamic named range called "JobsTable":
=OFFSET(Jobs!$A$2,1,0,COUNTA(Jobs!$A:$A)-2,11)
I've got two pivot table reports working off one dataset.
I've named the range Recharge with the formula as below..
=OFFSET('Recharge'!$A$1,0,0,COUNTA('ABC Recharge'!$A:$A),16)
But this uses column A as the longest column... but sometimes it will be column I - how can the formula be adapted ? or can it be ? i've been looking at the Max function and trying to incorporate that but my limited brainpower has gone to mush.
I work for a UK charity and have a list of funders in an Excel 2007 spreadsheet.
One of the columns refers to the date on which a new application for funding can be made to that particular funder.
In many cases new applications for funding can't be made for 1 or more years since the last application - sometimes as many as 5 years later. How to get a cell to refer to the date that it contains.
For example, say I have in cell A1 "The Acme Funding Organisation" and in cell B1 (i.e. the "Reapply when?" column) a date of 01/04/2013 (British date format, i.e. 1 April 2013) then what I want Excel to do is to look at the date in cell B1 and if that date has been reached to highlight the cell red. That way I'll know that the reapply date has been reached & that a new application can be made.
I have a selection that I am going through with a 'for each' and then performing actions if the cells meet a certain criteria. I have been referencing nearby cells with the offset function, but now my sheet is too big and I need to change the code often and the offset function is difficult, is there anyway to refer to cells without the offset function, preferably by column letter
PHP Code:
For Each Cel in SelectionIf Cel = x Thenvalue1 = Cel.Offset(0,39).Valuevalue2 = Cel.Offset(0,5).ValueEnd IfNext CelÂ
In conditional formatting, which formula do I use to refer to another cell? Trying
=(ISBLANK(K1))
without luck.
How can I use (with or without macro) cell text to refer to different worksheets inside a formula. For example I've formula =INDEX(Mary!B9:E17...) but I wanted to write that 'Mary' or whatever sheet name to a cell in one sheet and sheet refenrence in this index-formula would change accordingly.
View 5 Replies View RelatedI have a cell containing a 'bullet' symbol (•) and a cell containing text.
If I make the bullet red and the text is black is there a way I can combine them in the same cell and the bullet remains red and the text black?
Essentially the situation Im in is I have a load of text I need to add coloured bullets to and I dont want to individually paste in and colour format all the bullet points because it would be too time consuming.
Basically i want to use a UDF to count cells in a range of a certain colour.
But i want to make it easy for the user to be able to change the colour the function counts, so i thought i could ask them to colour the cell in which the function is written.
Is there a way to tell the function to pick up the Interior.ColorIndex of the cell it is written in?
Use Application.caller.interior.colorindex
macro which can paste the value from A1, to another B1 and when A1 is edited again, pasted it in B2. This will probably go on and on until B30. I have tried the if else then in Macro, and even the if elseif, but both don't go futher than B2. E.G A1=1 B1=1 A1=4 B2=4 A1=3 then nothing happens to B3. If there is a way to make this work, it will be great. The way i am tryin to get it is to have =if(B1="","",1) for each cell from C1:30 and with C31 the formula "=count(C1:C30)+1". Then i formated C31 to a custom and make it so that before numbers, there is an B. This means that if B1,2,3 and 4 and numbers in them, then C31 will read B5. That will be the cell i want my next record to go. I would prefer it if there is just a code that i can enter that will go to the next cell when it knows the current cell has a digit in it but if i have to, the count way will do,
View 9 Replies View Relatedis it possible to refer to a cell by a variable cell number? For example suppose i want to refer to a cell on column B, by a value which is in cell C1, so the if C1 has the value 7, i would refer to cell B7, abd if it has the value 87 i would refer to cell B87.
View 2 Replies View Related