i've got a form that shows employee data in labels, and i'd like the user to be able to double click a label to change it (using a pop-up form). is it possible to get the pop-up to show after a double click instead of a single click?
View 5 RepliesI am trying to create a data entry sheet to enter quotes on. When a quote is received, I click on my "Add quote" button and a userform appears. Data is entered into the userform (frmEntryForm) and returned back to the next available row.
I also need to be able to:
Edit a row by double-clicking it. When a row is double-clicked, data from that row is passed back to the userform, edited and returned back to the same row (to prevent duplicates).Validate that all fields are complete within the userform where relevant (i.e. if the work is not complete or in progress then the "Invoice Number" and "Actual Cost" fields are disabled and blanked to prevent entry (I think this is almost sorted judging by my tests)
I have attached my sheet : 2014 Gatwick Quote Log (Macro Enabled).xlsm
I am using a userfrom in my sheet. i want to link label2 = sheets("OF $").Range("D6").value
I mean I want to lable2 = cell value as link
I present a form (a calendar) twice in my routine to the user but I want to change the Caption of the Label on each pass?
e.g.
The first time it's displayed: 'Please select a start date' (calendar closes & goes off and does stuff)
... and on the 2nd display: 'Please select an end date'.
Is it possible to load an image into a label and have the caption for the label be visible too? I've only been successful having one or the other display but not both.
View 2 Replies View RelatedI want a floating userform (showmodel = false) to display the results of a cell.
On excell spreadsheet I can assign a cell value to an object/shape, as the cell value changes so does the display on the object automatically.
I want the same results on a userform.
As i want this for display purpose only can i use the label caption for the above question?
How to copy a label caption (from userform) then paste it in a worksheet.
View 2 Replies View RelatedI have multiple Userforms with labels etc, all controls are similarily named (so I could do this) and I can refer to the Userform dynamically but the Label caption/Controls don't change, any idea's how to get them working.
View 7 Replies View RelatedI have a userform that has a listbox that contains data in 7 columns. I also have a command button that when clicked allows the user to edit the data in whatever row of the list box is highlighted. This works fine.
I decided to have a double click in the listbox on a row do the same thing. So I simply picked the double click event and called the command button sub. When I try this, it runs the command button sub, but then it runs the userform Activate sub. This is a problem as it does things that I do not want to occur again.
I then decided to put the command buttom code in a separate sub and then call that sub on the double click -- same result.
Then I just put the exact code that I have in the command button into the double click event -- still does it.
Anyone know why this happens, I see no reason for it. It works great in the command button, but with double-click it run the userform Activate sub when it is done.
Here is the code that runs (if called by a command button it works fine, if called by a double_click in the listbox, it runs the userform_activate sub):
Private Sub Edit()
SetCell = "d" & ListBox1.ListIndex + 5
Range(SetCell).Select
Range("AA1").Value = 1
ADD_ODC.Show
NextRow = Range("D65536").End(xlUp).Row
EndARR = "J" & NextRow
ODCData = Range("D5", EndARR)
ListBox1.Column = WorksheetFunction.Transpose(ODCData)
Range("AA1") = ""
ListBox1.ListIndex = -1
Filling
End Sub
I've found the code below and tweaked to suit my needs but having trouble. Had it working one time. The code below calls a userform when the user double clicks on a cell. The form pops up and is not active/enabled. I cannot select anything on the form until I select a cell on the sheet, then everything on form becomes active/enabled.
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
'check cells for desired format to trigger the frmSel_WBS.show routine
'otherwise exit the sub
Dim NumberFormat, DF
NumberFormat = Array("[Blue]General")
For Each DF In NumberFormat
If DF = Target.NumberFormat Then
frmSel_WBS.Show vbModeless
End If
Next
End Sub
following on from previous post (http://www.excelforum.com/excel-prog...g-up-form.html) what if the selected cell is a merged cell (cell count is greateer than 1), what is the best solution to enable double click event on merged cell ?
View 2 Replies View RelatedI have a worksheet in whichs Column A Cells , there is corresponding string content in Col. Z. Some cells of column Z contain of many lines (up to 100 line) which i want to reduce to one. I want to select one line through double clicking in the listbox of the userform and all other lines should be deleted and only the clicked one should remain. Code should then jump to the next non empty Z cell.
Columns B, C, D, E, F, G and H should also be shown in the userform and they should be live editable. I have attached and example file with userform and example data.
I have spreadsheet with client names. I'd like to build logic that will open a form with client information when a user double-clicks on the client name. But I have a couple of problems.
- First, I'd like to protect the sheet and hide the formulas. But when I protect the sheet, I get the "the cell or chart you are trying to change is protected" error when I double click the protected cell.
- If I deselect the "Select Locked Cells" options when I protect the sheet, I no longer have the ability to double-click on the cell.
how I can double click on a cell yet not allow the user to edit the cell (or see the formula)?
I created a userform where if a value from cell x is true then the label caption changes to value in cell z. While everything works fine, the label caption does not seem to appear in my userform until i click on the label. Is there anyway that it can appear automatically once the userform opens?
Also example of my code is:
Private Sub EventDateResult_Click ()
If Range("A5") = "1" Then
Me.EventDateResult.Caption = Range("N4")
End If
End Sub
I'm trying to change the caption of a label (OLEobject) and it is not working so far :
[Code].....
I have just noticed that there is no defult event for the running code after updating a label caption. I would like to have like a textbox does (Change,AfterUpdate). to run code on the label caption change. could it be done with activex?? can it be done at all.??
View 2 Replies View RelatedI have 3 labels in my userform that I want to display the text in AN50,AN52 and AN54 in all the time. How can I write this code?
View 9 Replies View RelatedI needed to put a Checkbox on a Worksheet. The standard Checkbox options in Excel FormControl and ActiveX Control were too small. I found a work-around using the following macro attached to an ActiveX Label that was formatted as Wingdings font. The macro basically changes the character from a empty box Wingdings Chr(168) to a checked box Wingdings Chr(254) when the user clicks on the label.
Private Sub Label1_Click()
If Label1.Caption = Chr(254) Then
Label1.Caption = Chr(168)
[Code]....
But I get this error on an ErrorHandler that I have included in the macro. "An error has occurred. Error number =438. Error Description=Object doesn't support this property or method."
its possible to convert a blank string on a label into an integer? My form loads and populates a label.caption with the value of the activecell.value. Sometimes the activecell.value is empty and sometimes has a number in it. I need to do a calculation (label.caption * 2) but if the label.caption is empty it throws an error. I need it to treat an empty label as zero.
View 2 Replies View RelatedIs it possible to have a caption on a label with mixed font size. I tried this but the 2nd call just overwrote the first.
Code:
Private Sub UserForm_Initialize()
Call EM
Call aint
End Sub
Public Sub EM()
[Code] ......
I have a listbox that is currently populated via the following code, designed to give a unique list with no repeats.
Code:
Sub UserForm_Initialize()Dim UniqueList() As String
Dim X As Long, y As Long
Dim r As Range, rAll As Range[code].....
This code works fine. NOW, what I need to do, is set individual labels, based on the values in the listbox, BUT, here is the kicker - I don't want to select any of the listbox values. I know there will be seven rows in the listbox that correspond with seven labels.
What I nede to do, is set the first label.caption as the first row in the listbox. The second label as the second row, etc. The listbox only has one column, and I have tried the following code, but it doesnt work.
Code:
With UserForm2 .Label1.Caption = .lbxParalegal.List(0, 1)
End With
I have two text boxes on a userform that are used to populate a label caption based on the textbox values. How do I set the label caption to update once a a textbox value is changed?
View 2 Replies View RelatedFor a form that dynamically creates a series of text boxes and labels, does anyone know how to change the caption of a dynamically created label to display the value of a cell in a worksheet? The cell in the worksheet changes according to input on the text boxes. In the form's code, I have:
Dim newLblFreq As MSForms.Label
Set newLblFreq = Me.Controls.Add("Forms.Label.1", "lblfreq" & i, True)
newLblFreq.Caption = Range("V" & i).Text & " Hz"
But once the label is created, the caption won't change, even if Range("V" & i) changes...............
I'd like to: Display the contents of a group of cells in a userform's label's caption. The columns containing the cell's which contents would be displayed are fixed (do not change). The rows will change. I need to reference the Ar, Br and Cr columns (where r is for row) of whichever column I am working on at a given moment.
View 4 Replies View RelatedI'm amtepting to populate some labels from some predefined strings based on the scrollbar value. I have these codes:
Option Explicit
Public Meddelande1 As String, Meddelande2 As String, Meddelande3 As String, Meddelande4 As String, Meddelande5 As String, Meddelande6 As String, Meddelande7 As String, Meddelande8 As String, Meddelande9 As String
Private Sub UserForm_Initialize()
On Error Resume Next
Workbooks("Kontrollsystemet.xls").Close SaveChanges:=False
Application. ScreenUpdating = False
Workbooks.Open "V:allaBeredningKontrollsystemetKontrollsystemet.xls", ReadOnly:=True
Sheets("Meddelanden").Activate
Meddelande1 = Range("B2").Text
Meddelande2 = Range("B3").Text....................
I'm buildng a userform for data input.
As an aid, I have a label at the bottom of the form and when a person tabs onto a textbox that labels then states what you are supposed to input into that textbox along with an example. When you tab onto another textbox the caption on the label changes to give another explanation and example.
I attempted to insert an if statement into the userform which states that if a textbox is enabled then the caption of the label = "Example"
If textbox1.enabled = True Then label1.caption = "Explanation 1, Example 1"
If textbox2.enabled = True Then label1.caption = "Explanation 2, Example 2"
End If
End If
I have a label control whose caption is set from text from a work sheet
How can I set the text of the caption to bold
I have a userform in excel....the listbox "listbox1" has over 1000 items....and i have a label "label5" also.
What i want is if I select for example 10 items from the listbox1 to be shown in the label5 directly....and of course if i select or deselect any item will be applied in the label
For example...selected items from listbox are;
5
6
7
8
9
the label will show me the same
5
6
7
8
9
Code while noting that the list box has many columns...so i want to select which column to be appeared in label.
I have a userform in Excel and I would like to have a label calculate from the sum of 3 different labels. I have tried a few ways of which none worked.
This is what I currently have. This returns $0.00 in the label value but does not calculate...
Code:
Public Sub TotalCACost()
If TextBox12.Value > "" Then
Label685.Caption = ""
[Code]....
The reason that I have it as a public sub is that I am calling it to Private Sub extBox12_Change() as well as a couple of other textboxes so that when ever TextBox12 or the other textBoxes gets changed, the value will recalculate. The "other textBoxes" change the values of label443, 444, 445, 385, 386, 387 etc..
I have the following code in a userform_initialize
ComboBox10.AddItem "0"
For x = 1 To 13 Step 1
ComboBox10.AddItem Format(x, "0")
Next x
ComboBox10.Value = Sheet4. Range("H25").Value
ComboBox10.ListIndex = 0
I would like to make the list index = 13 if the Label.Caption associated with the combobox = "Spare". I have 'Option Explicit' turned on & I get a message 'variable not defined'. How would I code this properly or more to the point I guess, what is the variable I should be using?