I have multiple Userforms with labels etc, all controls are similarily named (so I could do this) and I can refer to the Userform dynamically but the Label caption/Controls don't change, any idea's how to get them working.
i've got a form that shows employee data in labels, and i'd like the user to be able to double click a label to change it (using a pop-up form). is it possible to get the pop-up to show after a double click instead of a single click?
I created a userform where if a value from cell x is true then the label caption changes to value in cell z. While everything works fine, the label caption does not seem to appear in my userform until i click on the label. Is there anyway that it can appear automatically once the userform opens?
Also example of my code is:
Private Sub EventDateResult_Click () If Range("A5") = "1" Then Me.EventDateResult.Caption = Range("N4") End If End Sub
I have just noticed that there is no defult event for the running code after updating a label caption. I would like to have like a textbox does (Change,AfterUpdate). to run code on the label caption change. could it be done with activex?? can it be done at all.??
I needed to put a Checkbox on a Worksheet. The standard Checkbox options in Excel FormControl and ActiveX Control were too small. I found a work-around using the following macro attached to an ActiveX Label that was formatted as Wingdings font. The macro basically changes the character from a empty box Wingdings Chr(168) to a checked box Wingdings Chr(254) when the user clicks on the label.
Private Sub Label1_Click() If Label1.Caption = Chr(254) Then Label1.Caption = Chr(168)
But I get this error on an ErrorHandler that I have included in the macro. "An error has occurred. Error number =438. Error Description=Object doesn't support this property or method."
its possible to convert a blank string on a label into an integer? My form loads and populates a label.caption with the value of the activecell.value. Sometimes the activecell.value is empty and sometimes has a number in it. I need to do a calculation (label.caption * 2) but if the label.caption is empty it throws an error. I need it to treat an empty label as zero.
I have a listbox that is currently populated via the following code, designed to give a unique list with no repeats.
Code: Sub UserForm_Initialize()Dim UniqueList() As String Dim X As Long, y As Long Dim r As Range, rAll As Range[code].....
This code works fine. NOW, what I need to do, is set individual labels, based on the values in the listbox, BUT, here is the kicker - I don't want to select any of the listbox values. I know there will be seven rows in the listbox that correspond with seven labels.
What I nede to do, is set the first label.caption as the first row in the listbox. The second label as the second row, etc. The listbox only has one column, and I have tried the following code, but it doesnt work.
Code: With UserForm2 .Label1.Caption = .lbxParalegal.List(0, 1) End With
For a form that dynamically creates a series of text boxes and labels, does anyone know how to change the caption of a dynamically created label to display the value of a cell in a worksheet? The cell in the worksheet changes according to input on the text boxes. In the form's code, I have:
Dim newLblFreq As MSForms.Label Set newLblFreq = Me.Controls.Add("Forms.Label.1", "lblfreq" & i, True) newLblFreq.Caption = Range("V" & i).Text & " Hz"
But once the label is created, the caption won't change, even if Range("V" & i) changes...............
I'd like to: Display the contents of a group of cells in a userform's label's caption. The columns containing the cell's which contents would be displayed are fixed (do not change). The rows will change. I need to reference the Ar, Br and Cr columns (where r is for row) of whichever column I am working on at a given moment.
I'm amtepting to populate some labels from some predefined strings based on the scrollbar value. I have these codes:
Option Explicit Public Meddelande1 As String, Meddelande2 As String, Meddelande3 As String, Meddelande4 As String, Meddelande5 As String, Meddelande6 As String, Meddelande7 As String, Meddelande8 As String, Meddelande9 As String
Private Sub UserForm_Initialize() On Error Resume Next Workbooks("Kontrollsystemet.xls").Close SaveChanges:=False Application. ScreenUpdating = False Workbooks.Open "V:allaBeredningKontrollsystemetKontrollsystemet.xls", ReadOnly:=True Sheets("Meddelanden").Activate Meddelande1 = Range("B2").Text Meddelande2 = Range("B3").Text....................
As an aid, I have a label at the bottom of the form and when a person tabs onto a textbox that labels then states what you are supposed to input into that textbox along with an example. When you tab onto another textbox the caption on the label changes to give another explanation and example.
I attempted to insert an if statement into the userform which states that if a textbox is enabled then the caption of the label = "Example"
If textbox1.enabled = True Then label1.caption = "Explanation 1, Example 1" If textbox2.enabled = True Then label1.caption = "Explanation 2, Example 2" End If End If
I have a userform in Excel and I would like to have a label calculate from the sum of 3 different labels. I have tried a few ways of which none worked.
This is what I currently have. This returns $0.00 in the label value but does not calculate...
Code: Public Sub TotalCACost() If TextBox12.Value > "" Then Label685.Caption = ""
The reason that I have it as a public sub is that I am calling it to Private Sub extBox12_Change() as well as a couple of other textboxes so that when ever TextBox12 or the other textBoxes gets changed, the value will recalculate. The "other textBoxes" change the values of label443, 444, 445, 385, 386, 387 etc..
I have the following code in a userform_initialize
ComboBox10.AddItem "0" For x = 1 To 13 Step 1 ComboBox10.AddItem Format(x, "0")
Next x ComboBox10.Value = Sheet4. Range("H25").Value
ComboBox10.ListIndex = 0
I would like to make the list index = 13 if the Label.Caption associated with the combobox = "Spare". I have 'Option Explicit' turned on & I get a message 'variable not defined'. How would I code this properly or more to the point I guess, what is the variable I should be using?
Background: I currently have an some VBA code that will kick off a series of calculations on a remote server (7 calcs). I am showing a modeless form, to allow the user to continue to work in Excel while the external calculation is taking place. The code checks every few seconds (using .OnTime) to check the status of the calcs, and as one finishes, it starts the next calc, and updates the form (ie - "Running Calc #3 of 7", etc).
Problem: when I change the label on the form, it gives the form focus. So, if the user is in the middle of doing something, they are suddenly stopped, and have to click back on the spreadsheet to continue.
Questions: Is there a way to update content (label) on a form, without that form getting focus? If not, is there another way to provide updated feedback without disrupting what the user is doing? My fallback is to simply not update the form with progress reports, but since the calcs can take 5min or so, it would be good if they knew things were progressing.
UserForm1 Current OptionButton names are like ABC123, ABC 124, etc.
How can i change all names, with code - as i am not seeing a find and replace option within UserForms, to all but the "ABC" part, the result of the OptionButton names shall therefor be 123, 124, etc. - delete "ABC" or, find "ABC" and replace with
I have frame on a userform with command buttons. Is it possible to loop thru and capture the command button captions in a textbox. I'm trying to put together keyboard on a userform, so the user can populate a textbox with letters or phrases.
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file: Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
I have a userform which has a number of multipage controls nested inside each. So, the parent is Multipage1 with 2 pages. Page 1 of Multipage1 has a second multipage control (Multipage2 which has 4 pages). In Multipage2, page1 there is a 3rd Multipage control (Multipage3 which has 2 pages). In Multipage2, page 2 there is another multipage control (Multipage4 which has 3 pages)...and so on! I know this sounds complicated, but I am trying to get the caption of the selected multipage.
There are commandbuttons in all of the pages, which when clicked need to return the caption name of the multipage where they sit.
I have started the following code, but suspect there must be a better solution:
With Sales If .MultiPage1.Value = 0 Then Hardware_Purchases_Input.TextBox6.Value = .MultiPage1.SelectedItem.Caption & " - " & .MultiPage2.SelectedItem.Caption & " - " & .MultiPage3.SelectedItem.Caption End If End With