Label Controls Whose Caption Is Set From Text From A Work Sheet

Nov 23, 2007

I have a label control whose caption is set from text from a work sheet
How can I set the text of the caption to bold

View 9 Replies


ADVERTISEMENT

Label Caption Does Not Appear Until Label Is Clicked?

May 13, 2014

I created a userform where if a value from cell x is true then the label caption changes to value in cell z. While everything works fine, the label caption does not seem to appear in my userform until i click on the label. Is there anyway that it can appear automatically once the userform opens?

Also example of my code is:

Private Sub EventDateResult_Click ()
If Range("A5") = "1" Then
Me.EventDateResult.Caption = Range("N4")
End If
End Sub

View 3 Replies View Related

Label Caption - Cell Value In UserForm

Jun 17, 2014

I am using a userfrom in my sheet. i want to link label2 = sheets("OF $").Range("D6").value

I mean I want to lable2 = cell value as link

View 3 Replies View Related

Change The Caption Of OLEobjects Label?

Aug 5, 2014

I'm trying to change the caption of a label (OLEobject) and it is not working so far :

[Code].....

View 2 Replies View Related

Label Caption Change... Run Code

Sep 30, 2009

I have just noticed that there is no defult event for the running code after updating a label caption. I would like to have like a textbox does (Change,AfterUpdate). to run code on the label caption change. could it be done with activex?? can it be done at all.??

View 2 Replies View Related

Label Caption To Equal Cell Value

Jun 10, 2009

I have 3 labels in my userform that I want to display the text in AN50,AN52 and AN54 in all the time. How can I write this code?

View 9 Replies View Related

Change Caption Of Label & UserForm

Jun 20, 2008

I present a form (a calendar) twice in my routine to the user but I want to change the Caption of the Label on each pass?

e.g.

The first time it's displayed: 'Please select a start date' (calendar closes & goes off and does stuff)
... and on the 2nd display: 'Please select an end date'.

View 7 Replies View Related

Using Picture And Caption In A Label On Userform At Same Time?

Mar 31, 2014

Is it possible to load an image into a label and have the caption for the label be visible too? I've only been successful having one or the other display but not both.

View 2 Replies View Related

Macro To Change ActiveX Label Caption?

Mar 2, 2014

I needed to put a Checkbox on a Worksheet. The standard Checkbox options in Excel FormControl and ActiveX Control were too small. I found a work-around using the following macro attached to an ActiveX Label that was formatted as Wingdings font. The macro basically changes the character from a empty box Wingdings Chr(168) to a checked box Wingdings Chr(254) when the user clicks on the label.

Private Sub Label1_Click()
If Label1.Caption = Chr(254) Then
Label1.Caption = Chr(168)

[Code]....

But I get this error on an ErrorHandler that I have included in the macro. "An error has occurred. Error number =438. Error Description=Object doesn't support this property or method."

View 3 Replies View Related

Convert Empty Label Caption Into Number

Apr 17, 2009

its possible to convert a blank string on a label into an integer? My form loads and populates a label.caption with the value of the activecell.value. Sometimes the activecell.value is empty and sometimes has a number in it. I need to do a calculation (label.caption * 2) but if the label.caption is empty it throws an error. I need it to treat an empty label as zero.

View 2 Replies View Related

Caption On Label With Mixed Font Size

Jun 4, 2012

Is it possible to have a caption on a label with mixed font size. I tried this but the 2nd call just overwrote the first.

Code:
Private Sub UserForm_Initialize()
Call EM
Call aint
End Sub

Public Sub EM()

[Code] ......

View 4 Replies View Related

Set Label Caption Based On Listbox Rows?

Jul 24, 2012

I have a listbox that is currently populated via the following code, designed to give a unique list with no repeats.

Code:
Sub UserForm_Initialize()Dim UniqueList() As String
Dim X As Long, y As Long
Dim r As Range, rAll As Range[code].....

This code works fine. NOW, what I need to do, is set individual labels, based on the values in the listbox, BUT, here is the kicker - I don't want to select any of the listbox values. I know there will be seven rows in the listbox that correspond with seven labels.

What I nede to do, is set the first label.caption as the first row in the listbox. The second label as the second row, etc. The listbox only has one column, and I have tried the following code, but it doesnt work.

Code:
With UserForm2 .Label1.Caption = .lbxParalegal.List(0, 1)
End With

View 2 Replies View Related

How To Set Label Caption To Update Once Textbox Value Is Changed

Feb 26, 2013

I have two text boxes on a userform that are used to populate a label caption based on the textbox values. How do I set the label caption to update once a a textbox value is changed?

View 2 Replies View Related

Change Caption Of Dynamically Created Label

Jun 26, 2007

For a form that dynamically creates a series of text boxes and labels, does anyone know how to change the caption of a dynamically created label to display the value of a cell in a worksheet? The cell in the worksheet changes according to input on the text boxes. In the form's code, I have:

Dim newLblFreq As MSForms.Label
Set newLblFreq = Me.Controls.Add("Forms.Label.1", "lblfreq" & i, True)
newLblFreq.Caption = Range("V" & i).Text & " Hz"

But once the label is created, the caption won't change, even if Range("V" & i) changes...............

View 6 Replies View Related

Show Range Of Cells In Label Caption

Aug 18, 2007

I'd like to: Display the contents of a group of cells in a userform's label's caption. The columns containing the cell's which contents would be displayed are fixed (do not change). The rows will change. I need to reference the Ar, Br and Cr columns (where r is for row) of whichever column I am working on at a given moment.

View 4 Replies View Related

Change Label Caption Based On Scrollbar Value

Feb 1, 2008

I'm amtepting to populate some labels from some predefined strings based on the scrollbar value. I have these codes:

Option Explicit
Public Meddelande1 As String, Meddelande2 As String, Meddelande3 As String, Meddelande4 As String, Meddelande5 As String, Meddelande6 As String, Meddelande7 As String, Meddelande8 As String, Meddelande9 As String

Private Sub UserForm_Initialize()
On Error Resume Next
Workbooks("Kontrollsystemet.xls").Close SaveChanges:=False
Application. ScreenUpdating = False
Workbooks.Open "V:allaBeredningKontrollsystemetKontrollsystemet.xls", ReadOnly:=True
Sheets("Meddelanden").Activate
Meddelande1 = Range("B2").Text
Meddelande2 = Range("B3").Text....................

View 2 Replies View Related

Link UserForm Label Caption To Cell

Apr 20, 2008

I want a floating userform (showmodel = false) to display the results of a cell.

On excell spreadsheet I can assign a cell value to an object/shape, as the cell value changes so does the display on the object automatically.

I want the same results on a userform.

As i want this for display purpose only can i use the label caption for the above question?

View 3 Replies View Related

Change Label Caption When Textbox Selected

Jun 11, 2008

I'm buildng a userform for data input.

As an aid, I have a label at the bottom of the form and when a person tabs onto a textbox that labels then states what you are supposed to input into that textbox along with an example. When you tab onto another textbox the caption on the label changes to give another explanation and example.

I attempted to insert an if statement into the userform which states that if a textbox is enabled then the caption of the label = "Example"

If textbox1.enabled = True Then label1.caption = "Explanation 1, Example 1"
If textbox2.enabled = True Then label1.caption = "Explanation 2, Example 2"
End If
End If

View 5 Replies View Related

Remove Part Name/Caption From UserForm Controls

Jan 17, 2008

UserForm1
Current OptionButton names are like ABC123, ABC 124, etc.

How can i change all names, with code - as i am not seeing a find and replace option within UserForms, to all but the "ABC" part, the result of the OptionButton names shall therefor be 123, 124, etc. - delete "ABC" or, find "ABC" and replace with

View 4 Replies View Related

How To Copy Label Caption (from Userform) Then Paste In Worksheet

Jul 16, 2014

How to copy a label caption (from userform) then paste it in a worksheet.

View 2 Replies View Related

Dynamic Userform Doesn't Update Label Caption

Aug 9, 2009

I have multiple Userforms with labels etc, all controls are similarily named (so I could do this) and I can refer to the Userform dynamically but the Label caption/Controls don't change, any idea's how to get them working.

View 7 Replies View Related

Edit UserForm Label Caption On Double Click

Feb 29, 2008

i've got a form that shows employee data in labels, and i'd like the user to be able to double click a label to change it (using a pop-up form). is it possible to get the pop-up to show after a double click instead of a single click?

View 5 Replies View Related

Caption Multi Selected Items From Listbox To Label (One In Each Line)

Aug 9, 2014

I have a userform in excel....the listbox "listbox1" has over 1000 items....and i have a label "label5" also.

What i want is if I select for example 10 items from the listbox1 to be shown in the label5 directly....and of course if i select or deselect any item will be applied in the label

For example...selected items from listbox are;

5
6
7
8
9

the label will show me the same

5
6
7
8
9

Code while noting that the list box has many columns...so i want to select which column to be appeared in label.

View 2 Replies View Related

Go To Sheet Named As Text In Button Caption

Jun 3, 2008

There is a 'Home' page with a button for each employee - clicking the button takes the user to the appropriate employee's timesheet

There is also an 'Add New Employee' button on the home page which brings up a form and allows a new employee to be added.

Each employee has only 1 worksheet (Which is created based on a blank template page)

When the 'Add New Employee' button is clicked a form pops up which ask for name, D.O.B etc. The user fills out the form and clicks ok. The template sheet is then copied, renamed to the employees name, and all relevent fields are added to the template sheet (based on the users input). A button is also generated on the home page with the employees name as a caption and when it is clicked it goes to employees timesheet.

I have almost got this working.

The only problem is this only works once, So For Example say i Add 'John' then i add 'Mary' on the home page i now have 2 buttons with 'John' and 'Mary' on them. The problem is as soon as a second employee is added (Mary), the first employees button(John) is linked to the second employee's Sheet rather than its own(Mary). and after the spreadsheet is closed the buttons dont work at all.

The link below has the spreadsheet i have made so far, you can test it out if my description doesnt make sense or you can see the code behind the 'add new employee' form:

############################################################
#### 'Add Employee' Button on Add New Employee Form ####
############################################################

Private Sub cmdadd_Click()


'check for Name
If Trim(Me.EmpName.Value) = "" Then ..............................

View 9 Replies View Related

Loop Through Label Controls

Jan 11, 2007

Label2, label4, label6, etc. how can I loop through these labels (I want to turn visible to false for a set of labels…)?

View 5 Replies View Related

Change Of Toolbar Item Caption Does Not Work

May 14, 2009

I am trying to change the caption of a toolbar item but for some reason it does not work.

Application.CommandBars("Format").Controls("Item...").Caption = "I&tem..."
However,

Application.CommandBars("Format").Controls("Item...").Delete
for example works just fine

View 9 Replies View Related

Make The List Index = 13 If The Label.Caption Associated With The Combobox = "Spare"

Sep 23, 2006

I have the following code in a userform_initialize

ComboBox10.AddItem "0"
For x = 1 To 13 Step 1
ComboBox10.AddItem Format(x, "0")

Next x
ComboBox10.Value = Sheet4. Range("H25").Value

ComboBox10.ListIndex = 0

I would like to make the list index = 13 if the Label.Caption associated with the combobox = "Spare". I have 'Option Explicit' turned on & I get a message 'variable not defined'. How would I code this properly or more to the point I guess, what is the variable I should be using?

View 3 Replies View Related

Copying A Certain Range In A Work Sheet To Another Existing Work Sheet Using VBA

Dec 29, 2009

I have a range of cells in a work sheet "sheet 1 " my objective is to filter this range according to certain criteria (i ve succeeded to do this ) yet what i want to do now is copy this data to another existing worksheet in a certain range .

note :the existing worksheet to which i 'll copy the filtered data has some cells out of the range that i dont want to over write ..

Simply :how to copy a selected range of cells in a work sheet to already existing work sheet in a specific range aswell .

View 9 Replies View Related

CommandButton Caption Text Clipped

Oct 14, 2009

I have a commandbutton who's caption text is getting clipped along the bottom when I view the sheet at 100% zoom. If I look at 200%, the text is fine. What's going on here? I've included a pic of the offending button. Note the missing bottom part of the "g".

View 2 Replies View Related

Activate Sheet Of Checked OptionButton By Caption

Jan 14, 2008

I have created a Group Box in Excel with 4 Option Buttons in the group. I have also created a Command Button which currently, when clicked, changes to a worksheet I specified. I am trying to have the Comand Button, when clicked, look at the selected Option Buttons in the Group Box and change to the worksheet specified by the selected Option Button. I have tried an IF..THEN statement with no success. code below that I have tried.

Private Sub CommandButton1_Click()
If AM40 = 1 Then
Sheets("Billboards(1)").Select
'ElseIf AM40 = 2 Then
' Sheets("Live Events Feedback(1)").Select
End If
End Sub

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved