I'd like to: Display the contents of a group of cells in a userform's label's caption. The columns containing the cell's which contents would be displayed are fixed (do not change). The rows will change. I need to reference the Ar, Br and Cr columns (where r is for row) of whichever column I am working on at a given moment.
View 4 RepliesI created a userform where if a value from cell x is true then the label caption changes to value in cell z. While everything works fine, the label caption does not seem to appear in my userform until i click on the label. Is there anyway that it can appear automatically once the userform opens?
Also example of my code is:
Private Sub EventDateResult_Click ()
If Range("A5") = "1" Then
Me.EventDateResult.Caption = Range("N4")
End If
End Sub
I am using a userfrom in my sheet. i want to link label2 = sheets("OF $").Range("D6").value
I mean I want to lable2 = cell value as link
I'm trying to change the caption of a label (OLEobject) and it is not working so far :
[Code].....
I have just noticed that there is no defult event for the running code after updating a label caption. I would like to have like a textbox does (Change,AfterUpdate). to run code on the label caption change. could it be done with activex?? can it be done at all.??
View 2 Replies View RelatedI have 3 labels in my userform that I want to display the text in AN50,AN52 and AN54 in all the time. How can I write this code?
View 9 Replies View RelatedI present a form (a calendar) twice in my routine to the user but I want to change the Caption of the Label on each pass?
e.g.
The first time it's displayed: 'Please select a start date' (calendar closes & goes off and does stuff)
... and on the 2nd display: 'Please select an end date'.
Is it possible to load an image into a label and have the caption for the label be visible too? I've only been successful having one or the other display but not both.
View 2 Replies View RelatedI needed to put a Checkbox on a Worksheet. The standard Checkbox options in Excel FormControl and ActiveX Control were too small. I found a work-around using the following macro attached to an ActiveX Label that was formatted as Wingdings font. The macro basically changes the character from a empty box Wingdings Chr(168) to a checked box Wingdings Chr(254) when the user clicks on the label.
Private Sub Label1_Click()
If Label1.Caption = Chr(254) Then
Label1.Caption = Chr(168)
[Code]....
But I get this error on an ErrorHandler that I have included in the macro. "An error has occurred. Error number =438. Error Description=Object doesn't support this property or method."
its possible to convert a blank string on a label into an integer? My form loads and populates a label.caption with the value of the activecell.value. Sometimes the activecell.value is empty and sometimes has a number in it. I need to do a calculation (label.caption * 2) but if the label.caption is empty it throws an error. I need it to treat an empty label as zero.
View 2 Replies View RelatedIs it possible to have a caption on a label with mixed font size. I tried this but the 2nd call just overwrote the first.
Code:
Private Sub UserForm_Initialize()
Call EM
Call aint
End Sub
Public Sub EM()
[Code] ......
I have a listbox that is currently populated via the following code, designed to give a unique list with no repeats.
Code:
Sub UserForm_Initialize()Dim UniqueList() As String
Dim X As Long, y As Long
Dim r As Range, rAll As Range[code].....
This code works fine. NOW, what I need to do, is set individual labels, based on the values in the listbox, BUT, here is the kicker - I don't want to select any of the listbox values. I know there will be seven rows in the listbox that correspond with seven labels.
What I nede to do, is set the first label.caption as the first row in the listbox. The second label as the second row, etc. The listbox only has one column, and I have tried the following code, but it doesnt work.
Code:
With UserForm2 .Label1.Caption = .lbxParalegal.List(0, 1)
End With
I have two text boxes on a userform that are used to populate a label caption based on the textbox values. How do I set the label caption to update once a a textbox value is changed?
View 2 Replies View RelatedFor a form that dynamically creates a series of text boxes and labels, does anyone know how to change the caption of a dynamically created label to display the value of a cell in a worksheet? The cell in the worksheet changes according to input on the text boxes. In the form's code, I have:
Dim newLblFreq As MSForms.Label
Set newLblFreq = Me.Controls.Add("Forms.Label.1", "lblfreq" & i, True)
newLblFreq.Caption = Range("V" & i).Text & " Hz"
But once the label is created, the caption won't change, even if Range("V" & i) changes...............
I'm amtepting to populate some labels from some predefined strings based on the scrollbar value. I have these codes:
Option Explicit
Public Meddelande1 As String, Meddelande2 As String, Meddelande3 As String, Meddelande4 As String, Meddelande5 As String, Meddelande6 As String, Meddelande7 As String, Meddelande8 As String, Meddelande9 As String
Private Sub UserForm_Initialize()
On Error Resume Next
Workbooks("Kontrollsystemet.xls").Close SaveChanges:=False
Application. ScreenUpdating = False
Workbooks.Open "V:allaBeredningKontrollsystemetKontrollsystemet.xls", ReadOnly:=True
Sheets("Meddelanden").Activate
Meddelande1 = Range("B2").Text
Meddelande2 = Range("B3").Text....................
I want a floating userform (showmodel = false) to display the results of a cell.
On excell spreadsheet I can assign a cell value to an object/shape, as the cell value changes so does the display on the object automatically.
I want the same results on a userform.
As i want this for display purpose only can i use the label caption for the above question?
I'm buildng a userform for data input.
As an aid, I have a label at the bottom of the form and when a person tabs onto a textbox that labels then states what you are supposed to input into that textbox along with an example. When you tab onto another textbox the caption on the label changes to give another explanation and example.
I attempted to insert an if statement into the userform which states that if a textbox is enabled then the caption of the label = "Example"
If textbox1.enabled = True Then label1.caption = "Explanation 1, Example 1"
If textbox2.enabled = True Then label1.caption = "Explanation 2, Example 2"
End If
End If
How to copy a label caption (from userform) then paste it in a worksheet.
View 2 Replies View RelatedI have multiple Userforms with labels etc, all controls are similarily named (so I could do this) and I can refer to the Userform dynamically but the Label caption/Controls don't change, any idea's how to get them working.
View 7 Replies View RelatedI have a label control whose caption is set from text from a work sheet
How can I set the text of the caption to bold
i've got a form that shows employee data in labels, and i'd like the user to be able to double click a label to change it (using a pop-up form). is it possible to get the pop-up to show after a double click instead of a single click?
View 5 Replies View RelatedI have a userform in excel....the listbox "listbox1" has over 1000 items....and i have a label "label5" also.
What i want is if I select for example 10 items from the listbox1 to be shown in the label5 directly....and of course if i select or deselect any item will be applied in the label
For example...selected items from listbox are;
5
6
7
8
9
the label will show me the same
5
6
7
8
9
Code while noting that the list box has many columns...so i want to select which column to be appeared in label.
I have the following code in a userform_initialize
ComboBox10.AddItem "0"
For x = 1 To 13 Step 1
ComboBox10.AddItem Format(x, "0")
Next x
ComboBox10.Value = Sheet4. Range("H25").Value
ComboBox10.ListIndex = 0
I would like to make the list index = 13 if the Label.Caption associated with the combobox = "Spare". I have 'Option Explicit' turned on & I get a message 'variable not defined'. How would I code this properly or more to the point I guess, what is the variable I should be using?
In an open excel file, in the top left-hand corner, the file name is always "Microsoft Excel - Your File Name".
does anyone know how to have the top-left hand corner show "Your File Name" only?
After scouring the entire OzGrid, I have found the following two macros that partly satisfy what I want to achieve. BTW, following two macros are executed on Sheet2 and I want to achieve the following:
On Worksheet_Activate, show columns that match the criteria value in Sheet1.D4 (Sheet1.D4 contains a dropdown list with about 6 text values). In addition to that, if Sheet1.D4 value is blank then show all columns. Right now, it successfully shows columns that match the D4 value but does not work if that D4 value is left blank, instead it hides all columns in range (C:CV). So in short, to the first macro, I need to add the criteria if D4 is blank, then keep the sheet intact and don’t hide anything, just show all columns.Once on that sheet after the Worksheet_Activate event has occurred, with the second macro “ToggleColumnsVisibility” following things need to happen. BTW, currently this macro is assigned to a button (from Forms Toolbar).If cell D4 has a value, then the button’s caption should read “Show All” and when that button is pressed, it should show all columns in the range (C:CV), and the button's caption needs to change to “Show Selected”. In “Show Selected” mode, when that button is pressed, it needs to show all the columns that match the D4 value.If cell D4 is left blank, then the button's caption should read "No Action" and when the button is pressed, it should not do anything but just show all columns.
As you will notice in the header, my experience with Excel is very limited, so detailed instructions will be greatly appreciated. I am also hoping that proposed solution uses some of the efficient/effective ways of using loops such as described below (example taken from this website from this link http://www.ozgrid.com/VBA/SpeedingUpVBACode.htm)
Sub TrueOrFalseFaster()
Dim bYesNo As Boolean
Dim i As Integer
bYesNo = (i = 5)
MsgBox bYesNo
End Sub
Sub ToggleTrueOrFalseFaster()
Dim bYesNo As Boolean
bYesNo = Not bYesNo
MsgBox bYesNo
End Sub .........
I have a userform that shows while a macro is running. The userform just informs the user that the macro is still in progress. However, I can get the userform to show and the macro to run, but the label on the userform won't appear. Here is the code I have:
Code:
Private Sub Userform_Activate()
Application.ScreenUpdating = False
Sheets("Data").Select
[Code].....
I have a data set consisting of three columns. Column A is a name, B is an x-axis value, and C is an y-axis value.
I use the B and C column to plot the positions in an X/Y point diagram. This is working nicely. But is there a way for me to get the value in the A column as the label for the data? Or in some other way shown with mouse over or similar?
Dataset could look like:
A
B
C
Jensen1
14
150
[Code] .......
I am trying to make a Progress bar with a statment using a Userform with a label saying Please wait. I call the form using UserForm1.Show vbModeless.The form shows and functions as needed but the label with the caption please wait is not visible. how to get the label to show?
View 1 Replies View RelatedI'm newer in VBA. I will appreciate for help creating vba procedure. I would like to hide/show range of cells by that condition:
View 11 Replies View RelatedI am displaying cells in textboxes depending on the results of a listbox selection. I was wondering if there is code for making the textbox names variable (so I could just loop through the offsets and textbox names)
the code below works but I would like to make it more versatile and shorten it.
There are other textboxes on the page.
Sub detailfill() ....