When I look at the cell: wsEmpRec.Cells(10,50).Value in the VBA Watch window the value is Empty. I mean, that's the actual word that shows up. I'm trying to test if there is a value in the cell but when I use: if wsEmpRec.Cells(10,50).Value = "" then the condition is not being met. How can I test for an Empty cell as opposed to a cell that contains an empty string?
View 9 RepliesHere find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
Is a Cell with a formula (like shown below) considered true, or is it empty?
=IF(Scorecard!$B$13,Scorecard!$AD$4,"")
If Scorecard!$B$13 was False...
Would a cell with the above formula be considered?
True or Empty?
If Scorecard!$B$13 was True...
A cell with the above formula would be True.
I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
IF cell(some cell) empty AND cell(Diferent cell) not empty then Put Formula in empty cell
Next (to go throught the cells because the range constantly changes with every new report)
I am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
DeleteEmptyRows(Sample).xlsx
Sheet1.doc
Sheet2.doc
I am getting values for my excel sheet from another department excel sheet . everything works fine. If there is no values in the rows in the Department sheet, then i need to hide the rows in my sheet. How to code this in VBA. When they add values to the rows then i should make the rows visble here. Kindy give me a sample of vba code to this or suggest me to solve.
View 9 Replies View RelatedIs it possible to make a cell "really" blank/empty based on an If statement? For instance:
=if(a1>10,a1,"")
Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.
So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.
Is there any way to tell Excel to make the cells truly empty?
I need to write a macro which checks cells in one column and if the cell is empty it deletes the whole row (which contains the cell).
I tried this code but it doesn't delete all rows with empty cells:
I am using the following block of code, which cycles through the data and first deletes any cell with "Legal:" in it, and then cycles through again and deletes any row where the cell is blank.
The problem is that within the data, there are some locations where there are two blank rows in a row. When the code runs through, it deletes the FIRST blank row only, not the second. I Need ALL blank rows within the data set to be deleted.
Code:
Sub ModifyNewData()
Dim r As Range, rAll As Range
Dim WS As Worksheet
Dim iLast As Integer
[Code] ........
Also, if there is a way to write looking for blank rows into the first block of code looking for "Legal:" that would be cool too.
If not, just deleting all the blank rows is good. Right now, I have to have the second block of code run twice to get rid of the remaining blank rows.
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
I have a recordset that I get from Access and dump it onto an Excel spreadsheet. Many cells look empty but when I run a macro that depends on if these cells are empty it considers them not to be empty. Does anyone know what Access is putting in these empty cells?
View 4 Replies View RelatedHow I can look up non empty cells as shown in the below tables by use of a formula (I guess shifting data to the left without any empty cells between the data)?
Data as shown in present worksheet.
A
B
C
D
[Code]....
I have a cell J3 (for example) which I require users to enter something in but only if there is something in cell A3 or in other words if there is text in cell A3 then Cell J3 cant be blank but if there is no text in cell A3 then J3 can be blank.
I have a spreadsheet set up, and I have and "entry form" to put data into. I made a macro that copies the data, and pastes it into another worksheet. The problem I am having is that when the data pastes to the other sheet, it over-rides the information in that row.
Is there a command I can put in to make it seek out the next "empty" row and paste the information there?
I'm writing a macro that will repeat a set of calculations for a range of data (B9:AY17). The data will not always be the same size. It may be from B9:W17, or it may be from B9:AA17.
For example, if B9 is not empty, I want to copy B9:B17 to another sheet. Then I want to repeat this process for C9, copying C9:C17 to the second sheet, repeat for D9, and so on.
Ideally, the first empty cell would stop the macro. So if H9 is empty, the macro would end.
TIA for any help you can offer.
I am struggling to write the code to go to the next empty cell in a row. I have the code:
Code:
Sheets("Resultados").Select
Range("A3").Select
Range(Selection.End(xlToRight)).Select
ActiveCell.Offset(0, 1).Select
ActiveCell.Value = BP1
however this is not working. My program loops several times each time adding a value to the end of the row.
I have a macro where users enter some data. Once that is done, the macro opens up another file (worksheet), in order to summarize in it the data just entered. The file opens up as desired and the appropriate sheet is activated. Once there, what I'd like to have is:
1) Select Cell A5 as active.
2) If empty, use that row to copy the data just entered.
If not empty, select the first empty cell in column A, so that the data can be entered in that row.
i need to loop through worksheets to extract data from a range of cells. While looping, if a range does not contain any data, i need to set the cell value to zero. Can anyone help me with the codes?? =)
View 4 Replies View RelatedI have been sent a very large file of product data from one of my suppliers, They sent all of the details in separate fields (for example, colour, height, width, depth, material etc)
I have processed all these columns to appear how I want them, but now need to join them together so they can all be added to my main description. I want each one to be on a new line when it's displayed on my website, so I'll be adding a <br /> tag (break tag) after each item. This I can do no problem.
This would all be fine, if all the columns contained data, but a lot of the time the columns do not contain data (eg. I have a column for "knife length" but not all of my products are knives, so not all of them require this information"
for example, I have something like:
SKU | Colour | height | width | depth | material
ABC | blue | 50mm | 10mm | 60mm |
BCD | | 80mm | 75mm | 30mm | wood
CDE | red | | | | plastic
I could use something like :
=CONCATENATE($A2, " <br /> ", CHAR(10),$B2, " <br /> ", CHAR(10),$C2, " <br /> ", CHAR(10),)
This however means writing a piece of code for each cell I want to join, My cells go from range "O2" to "DW2", I don't fancy writing that for every single column!! Also, it means that If I have some empty fields, it will still add a break tag, this will look very odd on my site.
I really need a way of writing into the function "include if cell contains data" for each cell. If it doesn't contain anything, skip it and move to the next. (the char(10) in this just gives me a line break in excel so I can see what it'll look like when it's exported)
I need a better way to refer to an empty cell. I'm using “” but if the cell contain a formula but show empty it affect the conditioning format I'm using this =AND(cell <> "", existing_rule)
View 9 Replies View Relatedi need to find the first blank cell in a range of a row and return the cell value to the 1st cell of the row, or even return the column header if possible, without the use of VBA due to high security settings at my workplace!
I had this problem a few days ago and NVBC suggested Text to Columns, which worked initally but didn't seem to 'save' or stick... also, I'm not sure what is causing the problem to begin with. It was my understanding that Excel couldn't return a truely 'blank' value. If a cell was blank or empty, Excel still 'sees' it as Zero. WHY then, for the Love of Gummi Bears, will Excel not calculate my formula. It's a simple formula!
=A13+B13
I've tried
=SUM(A13+B13)
I've tried
=IF(ISERROR(A13+B13),"",A13+B13)
But if don't TYPE in a 0 or a number, then it just does nothing. 50 + 0 = should be 50 not blank or #VALUE!. 50 + Nothing = should be 50 not blank or #VALUE!
Attached is a small copy of what I'm trying to do. I've double checked that all number cells are formatted to numbers, not text. I tried the Data:Text to Columns trick. I've tried Tools:Options:Show Zeros. I've tried Manual and Automatic Calculation. They shouldn't have to type in 60 cells of Zero to get the simple calculation.
I have to copy and paste some datas under anothers but I don't know the code to do so; I mean, the code to paste on the first empty cell under the previously used cell.
View 12 Replies View RelatedI am learning how to create functions. All is going well, except when I auto fill for future input, the cells fill will all kinds of N/A or Null stuff etc.. I was trying to figure out how to do an IF statement like in my example below, that when the cell of reference is empty, keep it empty...but it is not working. take a look at it and tell me what I am doing wrong? I am using a grading system example...when a grade is put in, the corresponding letter grade fills, but when no grade value is entered, I want to keep the cells empty.
"=IF(H5="",""=IF(H5>89,"A",H5,IF(H5>79,"B",IF(H5>69,"C",IF(H5>59,"D","F")))))"
I would like to copy a value in a cell using a macro from one worksheet to another in the same workbook. If B1 in worksheet 1 has a value of 200 then this to be copied into worksheet 2 in the range of A1:A20 BUT in the next available empty cell, so if A1:A10 are full then 200 must go in A11.
How is it possible to have a talbe of data, months as headers, 4 rows of data for each month, but the next time I run code that imports from another Excel Report to paste the data into the next empty cells? ....
View 9 Replies View RelatedI want to keep going down a column until I get to an empty cell and then paste some text. I want to write code in vba but I am really struggling with this.
A1 = Hello
A2 = Hello
A3 = Hello
A4 = *Nothing* so I want to paste some text here?