IF cell(some cell) empty AND cell(Diferent cell) not empty then Put Formula in empty cell
Next (to go throught the cells because the range constantly changes with every new report)
Is a Cell with a formula (like shown below) considered true, or is it empty?
=IF(Scorecard!$B$13,Scorecard!$AD$4,"")
If Scorecard!$B$13 was False...
Would a cell with the above formula be considered?
True or Empty?
If Scorecard!$B$13 was True...
A cell with the above formula would be True.
I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
Is it possible to make a cell "really" blank/empty based on an If statement? For instance:
=if(a1>10,a1,"")
Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.
So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.
Is there any way to tell Excel to make the cells truly empty?
When I look at the cell: wsEmpRec.Cells(10,50).Value in the VBA Watch window the value is Empty. I mean, that's the actual word that shows up. I'm trying to test if there is a value in the cell but when I use: if wsEmpRec.Cells(10,50).Value = "" then the condition is not being met. How can I test for an Empty cell as opposed to a cell that contains an empty string?
View 9 Replies View RelatedI am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
DeleteEmptyRows(Sample).xlsx‎
Sheet1.doc‎
Sheet2.doc‎
I am getting values for my excel sheet from another department excel sheet . everything works fine. If there is no values in the rows in the Department sheet, then i need to hide the rows in my sheet. How to code this in VBA. When they add values to the rows then i should make the rows visble here. Kindy give me a sample of vba code to this or suggest me to solve.
View 9 Replies View RelatedI am learning how to create functions. All is going well, except when I auto fill for future input, the cells fill will all kinds of N/A or Null stuff etc.. I was trying to figure out how to do an IF statement like in my example below, that when the cell of reference is empty, keep it empty...but it is not working. take a look at it and tell me what I am doing wrong? I am using a grading system example...when a grade is put in, the corresponding letter grade fills, but when no grade value is entered, I want to keep the cells empty.
"=IF(H5="",""=IF(H5>89,"A",H5,IF(H5>79,"B",IF(H5>69,"C",IF(H5>59,"D","F")))))"
I want to make the formula: x=SUM(A * e^(-b*d)), wherein A and b are parameters and d the distance.
I've just over 10.000 rows and 15 columns (B4 to P10013) with distances. For each column i give a formula =$S$2*EXP(-$R$2*B4) and extent that for all colums and rows, then I sum all the columns. This works fine, except for the fact that when there is an empty cell the outcome is wrong. Because I set for example A as 10. The answer for that cell is 10, because he sees an empty cell as 0, i guess.
So how do I skip these empty cells?
I have a chart with blank values in some cases. I have set up the chart to show those values as gaps, which relies on the blank cell being empty. However, my blank cells have a formula along the lines of: if (condition,value,"")
So the chart does not consider them blank, presumably either because the formula is in there, or because "" is not the same as blank. How can I make this cell appear blank for the purposes of the chart?
Its probably very simple question, but i can not work it out.
I am trying to design a simple worksheet so I can keep track of how much money my room mate has paid me and what she owes. She pays $142 a week rent plus $23 a month for internet.
Please open the attached workbook. You can see in E7 and 8 there is a red negative number. This is because my tenant hasn't paid me yet for those weeks (D7 & 8).
How can i get these cells to read $0 or leave the cell empty?
The reason why I need this to read $0 or nothing is because it is messing up my next calculation in D3 where it works out how much she has paid for our internet bill.
Thanking you in advance. And sorry if this is a really daft question. Its probably something really simple i have missed.
Im looking to add an update macro button so if A ""
the formula contained in say H2 gets dropped down until it hits were col "A" is blank.
I have a spreadsheet that is pulled automatically from an access database.
The information that is pulled is invoices that have been paid for each of the temps working for our company.
Each month I have to give a figure per cost code on how much they are accruing so that they can see how much is still outstanding.
Right so what I am trying to do is have a macro take the temps charge rate then * 40 hours and place the amount into the empty cell.
As you will see in the attachement some of the cells are coloured. The purpose of the colouring is show that a invoice has been processed and paid for that week so no value is needed in that cell.
Then total all the cells at the end.
I need to write a macro which checks cells in one column and if the cell is empty it deletes the whole row (which contains the cell).
I tried this code but it doesn't delete all rows with empty cells:
I am using the following block of code, which cycles through the data and first deletes any cell with "Legal:" in it, and then cycles through again and deletes any row where the cell is blank.
The problem is that within the data, there are some locations where there are two blank rows in a row. When the code runs through, it deletes the FIRST blank row only, not the second. I Need ALL blank rows within the data set to be deleted.
Code:
Sub ModifyNewData()
Dim r As Range, rAll As Range
Dim WS As Worksheet
Dim iLast As Integer
[Code] ........
Also, if there is a way to write looking for blank rows into the first block of code looking for "Legal:" that would be cool too.
If not, just deleting all the blank rows is good. Right now, I have to have the second block of code run twice to get rid of the remaining blank rows.
Is there a way to have the answer to a formula display nothing if one of the cells have nothing. Example cell A3= A1*A2 ... it will naturally show 0.00 but even if both A1 and A2 are completely blank. Is it possible for A3 to show nothing if A1 or A2 or both contain nothing. I still want it to show 0.00 but only if that’s what is in the other cells.
View 5 Replies View RelatedI have a formula when C15 is empty it shows -18 value. I need if the value is blank then show blank?
Code:
=IF((Data!C15-32)*5/9="","",(Data!C15-32)*5/9)
I would like to use the IF function so when cell B2 is empty, cell C2 will stay empty. the formula =MONTH(B2&C2) need to be used when cell B2 is not empty. this to convert text to number in column C
This is the result that I would like to achieve
A
B
C
D
E
1
MONTH IN TEXT
MONTH IN NUMBER
2
MAY
5
3
4
JUNE
6
I have a spreadsheet. In this sheet the data is added daily so one column is increased everyday. The rows may also be increased. What I am trying to do is to sum the data in each row for a range of first cell in the row to the last non empty cell in that row and this has to be done for all the rows. So I thought the for loop would be useful for such requirement and I tried to write the following code. But unable to write the sum formula in the last empty cell in a row and I get the value error. The code is as follows.....
Sub sum_on_LastEmptyCell()
'find the last empty row in column A
lrow = ThisWorkbook.Sheets("sheet1").Cells(Rows.Count, 1).End(xlUp).Row + 1
'find the last empty column in a row
[Code] ........
Though one of my friend told that it can be done with "with and end with block but I am not aware of with and end with block.
It would be better if you tell me that how can I put the sum formula in my code. How can I use variables which return the row number and the column number in the sum range within the For loop because I want to put If Else condition for the calculations within the For loop i.e. if certain condition is true then I want this calculation to take place otherwise do something else. Moreover it will be easier for me to understand. Because I can use different formula based on different cells as well. Is there any way to do this?
I have a do while loop that runs until the reference cell is empty. This has been working but now I have changed the reference cells somewhat so that the cells contain a formula that returns nothing if a function returns 0 or an error. So the cell has no value but it does have a formula in it. The do while loop keeps running because it thinks that the cell has something it it.
Do While Cells(i, 2) ""
Is there something else that i can put for "" to get the loop to stop when cell contains no value but a formula.
I am using a IF(ISNA(Vlookup##,##,##)),"",(Vlookup##,##,##)) function, in order to remove N/A errors.
Is there anyway to convert the "" values to back to an empty cell without anything in it (i.e not text "", but empty as it was originally). I find that the file sizes are very large, when using this function, as data (although blank) is stored in each cell (i know this, because if I use cntr+arrow, it sees it as data, and not an empty area). I don't want to manually go through each cell and delete them as there is quite a bit of data (10000 rows , 2 columns, 30 tabs)
I wrote an IF AND formular to display "Yes" for a cell with zero. but when the cell is also empty, it still returns a "Yes" instead of empty.
this is the formular:
=IF(J2=3,"Yes",IF(AND(E2="",I2=0),"Yes","No"))
when I2 = 0 it returns Yes
Also with I2 = "", it still returns "Yes" instead of "No"
I am using a IF(ISNA(Vlookup##,##,##)),"",(Vlookup##,##,##)) function, in order to remove N/A errors. Is there anyway to convert the "" values to back to an empty cell without anything in it (i.e not text "", but empty as it was originally). I find that the file sizes are very large, when using this function, as data (although blank) is stored in each cell (i know this, because if I use cntr+arrow, it sees it as data, and not an empty area). I don't want to manually go through each cell and delete them as there is quite a bit of data (10000 rows , 2 columns, 30 tabs)
View 2 Replies View RelatedI'm using a formula to copy a time from one cell to another
across sheets. The format of the time is h:mm AM/PM.
However, when the formula references an empty cell, it puts in a
default value of 12:00 AM and I need it to remain blank, (just as
the referenced cell)
It's such a simple copy formula. ie:
=sheet1!A1
e-mail... howard<dot}coakleyatcoakley<dot].codotuk
Skype ID: howie10 (get skype from www.skype.com)
When i use
Code:
=IF(ISBLANK(I31);"";I31-IF(ISNUMBER(J31);J31;0))
The cell gives me an error, i think because I31 has a formula that returns no value.
How can i stop the formula if cell I31 gives me no data??
I'm creating a "universal-fluctuating" vendor inventory return worksheet for a auto parts store that consist of one criteria (cores, warranties, or N/R ) and will return one or two results of core cost and/or unit cost. This part of the task I have accomplished by using a drop down list for my criteria and my results will appear in two different columns using a Vlookup table. The problem is due to inventory fluctuating from cores and waranties on a month by month basis, vendor requiremnts differ for the number of units returned, and last make the boss happy on ink and papers supplies :D I was wondering if it is possible loop my code in a given column where it will move my code to the next row untill I reach a grand total?
View 8 Replies View RelatedUsing the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....