I have a recordset that I get from Access and dump it onto an Excel spreadsheet. Many cells look empty but when I run a macro that depends on if these cells are empty it considers them not to be empty. Does anyone know what Access is putting in these empty cells?
View 4 RepliesHere find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
Is it possible to make a cell "really" blank/empty based on an If statement? For instance:
=if(a1>10,a1,"")
Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.
So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.
Is there any way to tell Excel to make the cells truly empty?
I need to write a macro which checks cells in one column and if the cell is empty it deletes the whole row (which contains the cell).
I tried this code but it doesn't delete all rows with empty cells:
How I can look up non empty cells as shown in the below tables by use of a formula (I guess shifting data to the left without any empty cells between the data)?
Data as shown in present worksheet.
A
B
C
D
[Code]....
I am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
DeleteEmptyRows(Sample).xlsx‎
Sheet1.doc‎
Sheet2.doc‎
Is a Cell with a formula (like shown below) considered true, or is it empty?
=IF(Scorecard!$B$13,Scorecard!$AD$4,"")
If Scorecard!$B$13 was False...
Would a cell with the above formula be considered?
True or Empty?
If Scorecard!$B$13 was True...
A cell with the above formula would be True.
I am getting values for my excel sheet from another department excel sheet . everything works fine. If there is no values in the rows in the Department sheet, then i need to hide the rows in my sheet. How to code this in VBA. When they add values to the rows then i should make the rows visble here. Kindy give me a sample of vba code to this or suggest me to solve.
View 9 Replies View RelatedI am using the following block of code, which cycles through the data and first deletes any cell with "Legal:" in it, and then cycles through again and deletes any row where the cell is blank.
The problem is that within the data, there are some locations where there are two blank rows in a row. When the code runs through, it deletes the FIRST blank row only, not the second. I Need ALL blank rows within the data set to be deleted.
Code:
Sub ModifyNewData()
Dim r As Range, rAll As Range
Dim WS As Worksheet
Dim iLast As Integer
[Code] ........
Also, if there is a way to write looking for blank rows into the first block of code looking for "Legal:" that would be cool too.
If not, just deleting all the blank rows is good. Right now, I have to have the second block of code run twice to get rid of the remaining blank rows.
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
IF cell(some cell) empty AND cell(Diferent cell) not empty then Put Formula in empty cell
Next (to go throught the cells because the range constantly changes with every new report)
I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
When I look at the cell: wsEmpRec.Cells(10,50).Value in the VBA Watch window the value is Empty. I mean, that's the actual word that shows up. I'm trying to test if there is a value in the cell but when I use: if wsEmpRec.Cells(10,50).Value = "" then the condition is not being met. How can I test for an Empty cell as opposed to a cell that contains an empty string?
View 9 Replies View RelatedI have like 20 columns. I wonder if there is an Excel formula that will count all the non-empty cells across 20 columns. For example, if there are 10 non-empty cells from row B1 to U1 then enter 10 in the result cell A1 and so on down the number of rows. Or, on the other hand, count all the blank or empty cells from B1 to U1.
View 8 Replies View RelatedI have this calculation which works fine if all cells have a value. But it will happen that cells in the range are empty.
=SUMPRODUCT(--(1*LEFT('Courses input'!C4:D6,1)-C3<=0), --(1*MID('Courses input'!C4:D6,3,1)>=2))/E3
What can i do to exclude empty cells in the range from calculation?
how to find the next empty cell and then copy the data down, however; I am trying to do almost the opposite. I need to be able to click on a cell and have that cell's data copied above it until there isn't another empty cell. I will attach a small portion of my worksheet for viewing. Column A has account numbers and Column B has the brand of product. Unfortunately when I imported this data into excel from our software program it lists all the brands and then the account number is listed on the last row of brands.
View 3 Replies View RelatedI was wondering what would be the best way to go about hiding either rows or columns based on whether a particular cell is empty or not. The reason being, I want a graph and table to only display data when present.
View 14 Replies View RelatedI have cells 9 selected (9 columns by 1 row)
I need to paste these cells to the empty cells below.
The problem is that the first empty cell below could be any given row number (it will be dynamic) and the last row will also be any given row number (also dynamic).
How can I paste these 9 formula's to all rows below?
I need to start from its most basic so i can see what the macro is doing & then adapt.
See attachment.
This will take the form of a button to be clicked on in sheet1.
Sheet1 is my input sheet, sheet2 is my history sheet.
I want to copy the cell range B4:F9 in sheet1 into sheet2 - starting from cell C3.
Next time i click the button, copy the cell range B4:F9 sheet1 into sheet2 again, but underneath the data already there in sheet2
Each time i click the button it just keeps adding the data in sheet1 into sheet2, to form a history.
I have a number of worksheets, each sheet is set up like a data entry form, at the bottom of which is a command button that takes them to the next worksheet based on a value in a cell. what i want to do is before it takes them to the next worksheet it checks a selection of cells, if any of which are blank it shows an error message and wont allow them to continue, better still the cell that is blank it high lights with a red border.
View 2 Replies View Relateda code, that looks at range "A" (xls down) and then goes over that amount of columns in "I" and warns if there are any blank cells and ends the macro if so.
View 13 Replies View RelatedHow I might be able to create an IF statement that would look at various cells and if empty, would go to the next indicated cell, ect, until it found data and then conduct the sum analysis indicated in my formula below.
The cells identified in my formula, which look for "", I want to skip to the next as stated above if empty.
=IF(J4="","",IF(N4="","",IF(S4="","",IF(AB4="","",IF(AF4="","",SUM(J4,N4,S4,AF4))))))
The problem with this formula is that if J4 is empty, it stops and does not continue on...
I have set up a spreadsheet in order to track and calculate the number of students we teach at our organization. It is running prohibitively slow when entering new data. On one sheet each individual session is entered (the school, program, date, number of hours etc.) This is the Session worksheet.
On the next sheet(the Program worksheet) the maximum number of students for each unique program (this is usually a combination of school and the program) is calculated to ensure we are not counting students we teach weekly as new students. This is calculated using a formula:
:{=MAX(IF(Session!G:G=Program!A2,Session!D:D))}.
"Session!G:G" = the unique program name on the Session worksheet.
"Program!A2" = the unique program name on the Program worksheet.
"Session!D:D" = the number of students in that individual session...........
I have a bunch of "empty" cells. They only look empty visually. In fact, they contain something, because they are preventing some formulas from working. How do I cleanse them and make them truly empty without disturbing the contents of the other cells containing real data.
View 1 Replies View RelatedIs there a way to delete empty cells, without having to do each one individually. I have 10,000 numbers with about 500 empty cells. I did a search, but found nothing...
View 9 Replies View RelatedThere are 5 worksheets in a workbook one (Names) has 10 columns,
200 rows, I need to eliminate all blanc cells on this worksheet,
to make a list.
I don't want delete entire row,
only the empty cells in each column.
All rows have data but in different columns.
I need to do this in Excel: - to extract non-empty cells
source range
[blank]
[blank]
Peter
[blank]
Mary
target range
Peter
Mary
[blank]
[blank]
[blank]
(1D, length of source can vary, [blank] cells can be present/absent, horiz/vertical)
I'd like to achieve the above using built-in Excel functions, with or without sorting.
My Data in Col C
RegionEastEastWestEastWestEastEastWestEastEast
nad i make if formula
PHP
=IF(C2="East",C2,"")
the result is
CountEastEastEastEastEastEast
East
i want to count Non Empty Cell here my case from F2:F11
i use
PHP
=COUNTA(F2:F11)
it gives me 10
============
Why it gives me 10
while the result should be 7
and what is the good Solution for it