I have 13 columns - 12 representing each month of the year and then a total. I start in F15 with Jan and end in R15 with the total - this is the heading row.
Below that I have my numbers for each month. Here's what I need to do: Anytime the total changes (by updating the monthly numbers), I need the day's date to be automatically entered into F14. This way I know the last time the data was changed.
Please find attached.I have two sheets. In sheet 3 I will enter data. It must record on corresponding date & column in sheet 4.
Book2.xlsx
On Sheet1 I want a macro that looks for the last used cell in Column D and then put tomorrow's date into column A, 2 cells below where the last used data was found in col D.
I then want to copy the entire contents of sheet2 and paste it into the cell below where we enter tomorrow's date.
What I want to do is if I add data into B7 or F7 then the current date will appear in J7. I also don't want the date to change every time the project is opened.
Thus,
If I enter "withdraw or any word" into B7 or F7 - The current date (4-Dec) would appear in J7.
then if I close excel and I open it tomorrow, J7 would still read as 4-Dec, while if I enter "deposit or any word" into B8 or F8, the current date (5-Dec) would appear in J8.
- would need to be able to enter multiple entries on one day as well.
- also i am not familiar regarding macros.
I took an Excel course in college but am a bit rusty. I have a customer database that I created and I would like to see certain things after entering a date range that I specify. I uploaded a small excel sheet to show my database and what I'm looking to do. Basically I would like to enter a date range and see these answers:
Total Orders in that date range
Total unique orders in that date range
List of customers (name included) who ordered more than once in that date range
The only columns of data I need to use are: firstname, lastname and orderdate.
I have used data validation to colour rows in one of my spreadsheets at work. The column that uses the data validation is the first column and has a drop down list of 5 words. One of which is collected, which currently indicates when the card has been collected by the individual in question and no further attention is required. It colours the rest of the row green. There is also a column that is entitled 'Date Collected'. Instead of having to input this manually, is there a way to automatically enter the date to be the date that the 'Collected' value was selected?
The title is misleading, I realise there will need to be some sort of IF statement in the 'Date Collected' column. It's been a long day already.
I have a spreadsheet where a date is entered in column A with data in B-F. I am trying to write code to look in column A for a specific date and enter additional data into columns G-L on the same row. It needs to be able to skip the rows that are blank. So I have the dates of 12/1, 12/2 and 12/3 in column A rows 1,2 and 3 and I want to enter data for 12/2 on row 2 skipping the blank cells in row 1 for 12/1. Here is the code I have below.
VB:
Private Sub CBSecure_Click()
Dim my_name As String
Dim r As Variant
Dim l As Long
sFind = DockDoorCal.Value
If Trim(sFind) = "" Then Exit Sub
[Code]....
I really know nothing about vba so here goes. I would like to enter data in a row with 4 cells of info. then hit enter and return to the first cell and move the row down. all four cells must have data entered. and all four must move down. i tried some code as below i found and i modified but it did not work as expected. this moved the row down when returning the cursor to A2. It also should not copy the data style of the top row.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Column <> 1 Then Exit Sub
Application.EnableEvents = False
[Code].....
I have a workbook that I'm using to tracking staffing patterns within a mental health agency. When the workbook opens the user is asked to pick a date range and an office location. I've placed code into the userform that pre-fills the "start date" with today's date and the "end date" 7 days from today's date. I would like the user to be able to enter a unique date range should they wish but I have yet to figure out the coding to accomplish my goal.
[Code] .....
Attached File : Staffing Report 1.90.xlsm
I wondering if it's possible to create a code to have a popup where the user can enter a date in mm/dd/yyyy format and then all rows containing that date will be deleted.
View 9 Replies View Relatedis there a formula that will look at A2 and if the date in that column shows May 5, 2013, then in E2 it enters June 1, 2013? I would like E2 to automatically populate the first of the following month of A2.
View 7 Replies View RelatedIs it possible to use a date formula eg Today() to enter that days date when a blank cell say a1 gets data entered, then not change date the following day?
View 9 Replies View Relatedwhen I enter a start date and end date, it should autopopulate the columns with the dates in the middle including start date and end date.
View 1 Replies View RelatedI have to enter a ton of dates in cells that don't need to include the day. And so was hoping if there was a way to enter a date into a cell without having to enter the day.
In essence, it seems like I have to type in the date as month/day/year and excel will figure it out from there. I would like to be able to just type month/year without bothering with the day, such as 9/14. And then excel recognizes this as a date.
Excel has to be able to recognize it as a date because these dates are expiration dates. And I would like to conditional format these dates so that when the expiration date has past the cell turns yellow.
I would like to bring up an input box when a button is pressed containing the text "which number do you want to update".
The user would then enter a number eg 101 and then by clicking ok, todays date (in the format MMM/YY) would be entered into cell J101 in Sheet5.
In my sample workbook, (attached), all I want to do is up a formula in column E that compares values in columns A, B and C. If they are the same, I want to put the last year model in Column E.
I have filled in the first 12 rows to whow the desired result. Ultimately, for each part number and model combination, I want to put the final year for that combination in column E. The sample workbook constains just a few rows, but my master has about 30,000 rows.
I am creating a userform to enter data in to a spreadsheet. The userform is set out as follows
1.Text Box 1 (Reg)
2.Text Box2 (Token Number)
3.Option Button1
4.Option Button2
5.Command Button 1 (OK)
6.Command Button 2 (Cancel)
Option button one is set to default as True,
1.I enter information in to Text Box 1 (e.g. Test1), Option button 1 is True, click OK, the Text Box1 data + the time and date (Now() ) is entered in to the first blank row, (date = column A, Reg = column D & time = column F)
Text boxe1 is cleared of data.
Userform stays open.
part 1 I have working
2.I enter information in to Text Box 1(Test1) then Text Box 2 (1), Option button 2 is True, click OK, the data in Text Box1(Test1) is matched with the enters in column D (Test1). If this is a match then the data from Text Box2 is entered in to the same row as Test1 in the following order (token Number = column E & time = column G) Text Box 1 (Test1) is not required as it is already in column D
Text boxes1 & TextBox2 are cleared of data.
When I run the userform again all of the above is entered in to the next blank row. There will be a time delay between the first run and the second hence the need to match column D.
I would like to enter a date from an input box(which i have entered in the code below), this would then lookup in column F and find all rows and copy them to relevant sheet 7 days from the date entered.
E.g. if 24/11/2006 this would bring back all rows which from the 17/11/2006
Sub FindMe()
Dim intS As Integer
Dim rngC As Range
Dim strToFind As String, FirstAddress As String
Dim wSht As Worksheet
Dim rngSearch As Range
Dim strToFind1 As String
Dim rngC1 As Range
Application.ScreenUpdating = False
intS = 1
Set rngSearch = Worksheets("Template").Range("a3:z20000")
Set wSht = Worksheets("Closed Issues")
strToFind = InputBox("Enter the title to find").................
when the number in cell 'A1' reaches zero i want the VBA code to enter the date in cell 'A2' that it became '0'.
This is as far as i've got.
Dim keyRange3 As Range
Set keyRange3 = Range("L:L")
If Not Intersect(keyRange3, Target) Is "0"
Target.Offset(0, 2) = Time
End If
I would like to make a list of vehicles with auto servicing dates appearing in the next column. How can I do this, example would be say 30/11/2008 was the last service, next column would be next service due 30/02/ 2009 and then a column next to that to say when service was done.
Pretty simple but I can't seem to get it to auto bring up the next service date which would be in 3 months time or 90 days.
I'd like to be able to enter a date in excel as just the characters without the dashes and have it correctly recognized -- such as 05142006 changes to 5/14/2006. I have a great deal of data to enter and it would go much faster if I could do it in this format. Is there a VBA script or function of excel that I could use for this? I've tried looking around on here a bit and in the program settings,
View 9 Replies View RelatedHow to find which day it is when a date is entered.
View 4 Replies View RelatedI have a spreadsheet that contains data from sales being made in various locations (sheet 1). The date the sale was made is in column A, and the location is in column AZ. I may have from 0 to 12 sales at that location on the same date. I am building a report in another sheet (sheet 2) that counts the number of sales for each date and displays that number in a cell in row 3. Above row 3, I want a formula that will reference the location (AZ sheet 1) and display that into my cell above row 3 in sheet 2. Each column in row 1 sheet 2 will have new date.
View 5 Replies View RelatedI have a userform where I want the user to enter the date (US Version)
I want them to enter 121311
I want the textbox which I am using to show 12/13/11 when they exit from it.
Here is my code i am using:
Private Sub mm_built_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Dim mm_date As Date
Me.mm_built.Text = Format(mm_date, "mmm/dd/yy")
End Sub
What shows when they exit the entry for the above is Dec/30/99
How do I get it to show correctly?
I know there is a way to enter the current date in a cell.
But
Is there a way to prevent the previous dates enters from updating to the current dates evey day?
I'm having a hard time putting this into words, so I'll try to make it simple.
I have a list with cells b1 thru f1 empty.
If one or more of those cells becomes populated, I want today's date to show up in cell g1.
Yes, the user could enter the date manually, but apparently that's too difficult for some people.
Is there any way to defined our own fiscal month. I have a fiscal year where the start & end date is different from the normal calendar. I have store the start & end date on the different column. What i need is that when people enter a date, it will look up to the table and return the fiscal month.It's something like If the value is >=column A and <=column B, then the fiscal month=column C(refer to the below table). But i have no idea how to make comparison on date value. what kind of formula i should use? And also how to write the code if i want to use macro to implement this?
Start End Month
09/21/08 10/18/08 Oct
10/19/08 11/22/08 Nov
11/23/08 12/27/08 Dec
12/28/08 01/24/09 Jan
01/25/09 02/21/09 Feb
02/22/09 03/28/09 Mar
03/29/09 04/25/09 Apr
04/26/09 05/23/09 May
05/24/09 06/27/09 Jun
06/28/09 07/25/09 Jul
07/26/09 08/22/09 Aug
08/23/09 09/26/09 Sep
I am attempting to enter a code for the current date (m/d/yyyy). For appearance purposes only on the form I am using,
I am trying to enter spaces between the numerals. (" "&m&" "," "&d&" "," "&yyyy&" ".
I can only get the serial numbers to come up, no matter how I try to format the cell.
I have two sheets - Data and Mail.
I am using a userform to collate the information in the "data" sheet and have a unique ref number in column A. Data populates columns A - AC.
In sheet "Mail" I enter the Ref number and it pulls through the info using vlookups into a template which I then e-mail as the body of the text on the click of a macro button.
I wish to capture the date each time the button is clicked in the same data row starting in column AD then AE etc.
I have cobbled all of this together by searching around this forum - I have not expertise so please be gentle with me!
I have a sheet where I have a column of cells where I manually enter in a date. the format is d-mmm-yy. Before the end of the year rolled around I was able to enter in say only 12-31 and it would automatically change that to 12-dec-09, now when I do that it spits out 12-dec-10. It's not a big deal to type in the extra -09 to get it right but was wondering if there was a quick/easy fix to get it to know that I don't want a date in the future?
All dates I type in will be in the recent past...never more than 3 months or so old and never later than today's date.