I am after a macro to do the following, my visual basic skills are very limited (non existant):- Look at the date in cell A1 on Sheet 'Live Report' and err 'remember it' Copy a range of cells from A3 to A10 on 'Live Report' Go to sheet 'Monthly Summary' and find the date that had been remembered previously (this date will be in column A on 'Monthly Summary' which will probably be a mixture of values and formulas). After the date has been found paste special and transpose the 'values only' copied range from 'Live Report' (A3 to A10) in column B on 'Monthly Summary' next to the date that has been found in Column A.
now I thought about recording the macro, but it's an offset and if you click the chart, then it'll mvoe somewhere else even though the charts are always placed in the middle when generated. So I think I need to place it in a specific range. I want to use XY coordinates or range labels or something to that effect but would like something to this affect:
With Charts.Add .ChartWizard source:=Worksheets("sheet1").Range("a1:a20"), _ gallery:=xlLine, title:="February Data" End With
I got that in VBA help, but I'm not using Chart wizard, my code just creates the chart from the data on its own with specific chart type. So anyway, how would I make it put each of my five charts for the 25 people in the same place for every person. Performance Errors etc etc etc all will go in the right place everytime, regardless if you start with the page scrolled. I should do range right, but how do I change this macro to do it without chart wizard...just a chart that's already created and named. QUESTION: How do I place charts that are created from a data source onto a specific area of one worksheet, and those charts are always in the same place regardless of the person'a name.
I'm working on an assignment that pulls information for different countries and I'd like to know how to go about placing the charts on a specific area. Any help would be greatly appreciated!
With each click of a country, the country's information will be pulled from a 'data dump' that I created in the same file. The map and flag are also shown. Some of that information is just using lookups, or a combination of lookups and code, and the hardest part are the GRAPHS - which I'm having a really hard time placing and adjusting accordingly.
As of now the charts are automatically filled as the user clicks a new country, but all of the charts are placed in weird locations, but I'd like for them to be placed in the specified ranges above.
find a way to place a value of 1 (or a text "email sent: mm/dd/yy") in a specific cell on each row when an email is sent out through some VBA code I currently have. Then when the workbook is opened on another day, the code will look to see if that cell (target) is populated so that it doesn't trigger a second, third (repetitive) email every time the workbook is opened.
The spreadsheet contains rows of many clients, and growing every week. The code needs to be designed to search through each row, along a specific column (lets suppose column R beginning at row 7). When it finds the target rows blank, the code will turn each target cell red, as well as trigger a message box alerting that follow-up action is required.
I have a problem here with the currency style, when I put the number in the cell and clicked the currency style button, the currency is placed in the left side and the number is in right side. How can I make it both in the middle? http://i44.tinypic.com/bfnbqd.jpg
I know Excel is not the best tool for formatting sentences, but is there a way to insert a Line-Break based on a condition? (Either using Formula or VBA).
The situation is:A fixed-width cell, is a concatenation of 5 strings. Each of these 5 strings is a small sentence of 3-6 words; individually much smaller than the cell-width.2 of these 5 are fixed (one at start, one at the end). The other 3 are results of their respective "IF" formulas.Hence, the final sentence wraps over 2-3 lines.I need the 3rd & 5th sentence (the whole sentence, all 3-6 words of it) to start in a new line, only if they are going to be wrapped into two lines.
So If the wrapping results in: String1 String2 Stri ng3 String4 Stri ng5
Then change it to: String1 String2 String3 String4 String5
I having a bit of trouble entering numbers in Excel, every time I try to enter a number it seems to divide it by 100. For example : - 1 entered in to a cell becomes 0.01, 100 becomes 1....etc. I've tried formatting the cells and had no luck, tried Tool>Options but not sure where to look.
We recently bought some new software at work, and I'm having trouble formatting the exported data in a way that will work with existing reports. The attached file is what the data looks like after being exported. Basically, what I'm trying to do is insert rows for the missing numbers -- i.e., each name should be followed by rows numbered 1 through 10.
John Smith John Smith 1 1 4 2 8 3 4 5 6 7 8 9 10
My ultimate end goal is to have columns of data for each name, instead of rows:
John Smith 1 2 3 4 5 6 7 8 9 10
I've created a formula that can do that part, but it operates on the assumption that each name will be followed by a set number of rows.
What little I know about vba I've learned on my own, so I may just be missing something obvious.
Hi guys/gurls.. is there a way i can get the following check against range for orders which give result as invoiced(if within the range), duplicated(if 2 or more than 2 are on the orders list) & missing (which on not in the orders when checked against the range).
i have two chart A and chart B from ,chart A got nine repeting numbers and Chart B will show what is the number not in chart A or is outside from this number 0.1.2.3.126.96.36.199.8.9. i want auto generate to chart B.
I am trying to export a range of data from excel to xml. I have a module that puts the range of data into one cell:
Function Concat(myRng As Range) Dim myStr As String Dim c As Range myStr = "" For Each c In myRng If c.Value "" Then myStr = myStr & ", " & Chr(34) & c.Value & Chr(34) Next Concat = Mid(myStr, 2, 9999) End Function
How to all data to come in with one decimal place (eg. "4.5","5.0",7.0")
I need a formula in column d that will return all the missing values between for example b1 and c2 and b21 and c21. The catch is that the numbers in column b and c can be anywhere but row b will always have the starting number and next to that cell the ending number in column d.
a further condition is that it must only calculate the missing number if the value in column a=1. if it is blank than nothing must be calculated.
Monthly I am sent a spreadsheet detailing cost centre approval ranges for our management team. Unfortunately, the data provided shows a low range and high range in two different columns. Is their a formula to automatically generate the values for the missing numbers
For example columns A 1001 & columns B 1007
Can excel automatically generate the 1002, 1003, 1004, 1005 & 1006
Have developed a form for my associates and want them to be able to move to the cellls I want them to fill data in to by merely hitting the TAB or ENTER key vs. having to move the cursor to each cell requiring them to input data.
Want cursor to move in a specific cell order. You would think you could merely say 1M, 2C, etc.
I am facing few problems with excel ever since I updated windows 8 to windows 8.1. Whenever i try to enter a decimal number in excel, say for eg. 3.4, it reformats to date- Apr03. I even changed the date and time formats for eg. short date is formatted to dd/MM/yy and long date to d MMMM yyyy. The format is set to enlgish (uk).. what should i do?
I am working on a spreadsheet and I want to enter a number from a table and have the associated values from the table transfer with the number into my spreadsheet. What functions and formulas should I use? (Below is the Table, the PTM# is the one I would query for.)
X L/R Y PTM# 0.54R0.5820 0.82R0.5021 0.66R0.7322 0.06L0.2723 0.03R0.1324 0.55R0.2925
I have a macro that imputs data from an external database and puts it into a temporary worksheet. This data has 3 columns (ID, Date, Amount). I am then making another sheet which has X number of tables (one for each ID), with the years being the column headings, and months being the row headings. ie.
| ID X | +------+------+------+---> | | 1999 | 2000 | 2001 | +------+------+------+------+---> | Jan | $100 | $250 | $300 | +------+------+------+------+---> | Feb | $200 | $300 | $200 | +------+------+------+------+---> | Mar | $300 | $250 | $100 | +------+------+------+------+---> | Sum | $600 | $800 | $600 | | +------+------+------+--->
| ID Y | +------+------+------+---> | | 1999 | 2000 | 2001 | +------+------+------+------+---> | Jan | $100 | $250 | $300 | +------+------+------+------+---> | Feb | $200 | $300 | $200 | +------+------+------+------+---> | Mar | $300 | $250 | $100 | +------+------+------+------+---> | Sum | $600 | $800 | $600 | | +------+------+------+--->
Currently I have a few hidden fields for the DSUM Criteria. I start making the tables. And then filling in table based off of the month and year. Doing so I need 3 criteria: >= First Day of the Month <= Last Day of the Month = ID #
The problem is it takes Excel too long to fill in the 3 criteria fields, calculate the result, copy the result, and place it into the correct place on the table. Is there another way to get this data into the correct tables faster? Instead of using DSUM?