I need to add something to the code below to have my first row of data entered into cell "Q8". As it is now the data is starting on row Q9 instead of Q8, but the rest of it is filling in correctly.
[Code] .....
is it possible to enter data on a spredsheet while a form is opened or must the from be closed first. I thought I was smart to have a form remain open so users could change parameters but at the same time allow them to enter data in uprotected cells.
View 2 Replies View RelatedWe're trying to use one template to enter data with users being able to start entry from a number of different starting points. this changes they way the look-ups have to work. The attached sample explains it a whole lot better.
View 2 Replies View RelatedI'm trying to write a macro that will find a value beginning "ber" and paste it across to a different column. I have had a go at it but I keep getting the offset flagged up.
It needs to move 15 columns across and 7 rows down if that is of any importance.
I am trying to create a user form that will allow the user to type int values in boxes. Then when the user clicks the submit button the code needs to add the values from each user input box to the existing values in specific cells accross multiple worksheets. Then the form needs to be cleared after the cell values are updated. I can create the form it is the code on the submit button i am lost on. Also it is important that some boxes may be left blank.
If you click the Grey "Qty Form" button on sheet1 the form will open. User data numbers can be entered in the blank boxes. When the submit button is pressed the form needs to add the user entered numbers to the numbers in the corresponding cells in sheet 1 and sheet 2. How to code the submit button to do this properly. Also after the data on the spreadsheet is updated the form needs to be cleared and start the cursor back in the Item 1 box on the form.
Is there any way to set the list from a Combo Box to automatically start in the middle?
Whenever I select a Combo Box, the drop down list always automatically starts at the top of my selected range, ideally I would like it to start in the middle.
For example my Range that I am filling the Combo Box with lists dates: Today()-7 to Today()+7.
At the moment the first item in the combo box list is Today()-7, I would like it to be Today().
I have been working on my spreadsheet for sometime now, so far when I run into a code problem I can figure it out using someone eles's post. However, I can't seem to figure this one out. I need to send data from a userform to specific cells on my spreadsheet based upon the users selection in combobox 1, and textbox 1.
Example: User selects customer name from Combobox1, and part number auto loads into textbox1 from the data sheet.
There are then 11 combobox's that can be clicked as the userform is updated. Once the user is finished, I need the answers from each combobox to transfer to the worksheet next to the referenced Combobox1 and textobox1.
I used the code that RoyUk posted to him, but have only been able to get the first combobox to copy to the sheet, the rest stay blank.
(Here is the code so far)
Private Sub CommandButton2_Click()
Dim ce As Range, srcRng As Range
Dim sYear As String, sMonth As String
sYear = UserForm3.ComboBox1.Text 'When combobox1 is loaded, use as reference#1
sMonth = UserForm3.TextBox1.Text 'When textbox1 is loades, use as reference #2
Set srcRng = Range("c2", Range("c65536").End(xlUp)) 'Search range on worksheet
For Each ce In srcRng
I have a developed a UserForm to enter data into Excel. I can get the UserForm to enter data in row2 under the headings I have created. I have a Next button on the UserForm, which I want to go to the next row when pressed to enter dta in row3, then row4 etc. Is there anywhere I can find examples of how to do this?
View 9 Replies View RelatedHave developed a form for my associates and want them to be able to move to the cellls I want them to fill data in to by merely hitting the TAB or ENTER key vs. having to move the cursor to each cell requiring them to input data.
Want cursor to move in a specific cell order. You would think you could merely say 1M, 2C, etc.
I have sheet (say Sheet3) that is in essence a Database. I need to create a Userform to insert a row above the highlighted cell and insert the data on the Userform in that row.
Userform would have 3 textboxes to enter data, a submit button and a cancel button. (the 3 boxes titled Part, Price,Vendor)
In the Worksheet the 3 Columns are
A C E
Part Price Vendor
Is there a way to prompt users to enter information in a specific range of cells before they save?
View 1 Replies View RelatedI have created a spreadsheet which uses a User Form to input data and then give it a reference number (this bit works fine).
I am now trying to use a User Form to enter a reference number which will then be searched across my spreadsheet, I then want all the entered data relevant to that reference number to appear in a User Form along with additional fields for entry of additional info.
In this User Form, the original data could be modified but more importantly, the remaining data added before then being placed into the main spreadsheet.
This is a booking in system where the person presents to a receptionist and the initial data is entered. Once that person has been dealt with, the remaining details regarding their visit will need to be inputted, hence this request.
I have started a user form called submit stock. What i am trying to work out is if i can use this form to enter the data to the worksheet using the form to specific columns depending on the first choice.
View 8 Replies View RelatedEnter Data To Multi Sheet Through Userform. How can I enter Data from entryform to multisheet?
View 6 Replies View RelatedI have a userform that numerous people need to fill in. I want to add a login function so that each person has their own login detail. Their will be a command button called login. Until they login in they cannot enter any data.
View 4 Replies View RelatedI am having trouble using User Forms.
I am trying to enter data using User Forms to apply to a specific cell.
For example the user enters text or a number value into a text box and clicks a command button to submit that information into a specific cell. In this case D43.
I have 6 Headings in excel named...
"A" in cell A1, B in B1, "C" in C1, "D" in D1, "E" in E1 and "F" in F1.
There are two projects.
Project 1 has phase A, D & F and Project 2 has phase A, B, C, D & E.
My Specification follows...
1). Take Prject 1 - Which starts from A...in cell A2 I will keyin "A". When the phase comes to an end I will key in the end date of the phase. As soon as I key in the end date in cell A2 Letter D should automatically appear in the cell D2 and when Phase D comes to an end I will key in the end date in Cell D2 which should automatically keyin F in the cell F2. and is the same case for Project 2.
MONDAY
xxxxxxxxxxxxxTeam1 | Team2 | Team3 | Team4 etc.
Hours State1
-
Hours State2
-
Hours State3
-
etc.
TUESDAY
xxxxxxxxxxxxxTeam1 | Team2 | Team3 | Team4 etc.
Hours State1
-
Hours State2
-
Hours State3
-
etc.
WEDNESDAY
xxxxxxxxxxxxxTeam1 | Team2 | Team3 | Team4 etc.
Hours State1
-
Hours State2
-
Hours State3
-
etc.
Each team leader would then input hours in each state each day on their column. Make sense? Easy Peasy...
My question........... is it posible to have a userform where a TL would select their name (Column) and Day (Monday=Row 3, Tuesday=Row23 etc) from a dropdown and then input figures in txt boxes to submit them in the correct location?
I have a problem regarding highlighting a specific cell, when i entered a specific date in another cell
Let me explain
If there is a Name, joining date, termination date/resignation date in cell A1 A2 & A3 respectively.
If the name is John, Joining date = 01/01/2012, Resignation Date 06/06/13
I need a formula which highlights the cell A2 plus all those cells which have the same date when i entered a date (i.e 01/01/2012) in another cell.
I have this userform:
DATE : [TextBox1] WITHDRAWAL: [TextBox2]
[Commandbutton1]
In my sheet I have a list of all the days in a year in the cell range of AJ12:AJ376.
Basically I want to find the date in Textbox1 within the range of AJ12:AJ376 and enter the value of Textbox2 in a adjacent cell. The adjacent cell would be in column AT. This would be achieved hopefully via a code using the commandbutton.
I have a spreadsheet that will monitor payment schedules, in which both payment frequency and the payment start date are inputted by the user.
As such, to make filling out the column(s) fool-proof, I want to grey out cells in which data should not be entered.
For example, if the payment frequency is every 6th day, and the payments are to begin on day 0, then days 0, 6, 12 (etc) should be left white, whereas the remainder of the cells should be shaded.
I can achieve this using multiple conditional formatting rules in excel2007 with iterations of formulae of the type:
Let's say I have a long macro and I want to test some code a ways down in the macro, but I don't want to have to run through all the code to get there, because I already have my Excel spreadsheet set up at the point I need to check and I just want to start checking the code a ways into the procedure.
Short of commenting out all the code above where I want to start, is there another easier way to do this?
I use the following code to copy entire rows from one sheet to another and this is pretty standard.
VB : rng.EntireRow.Copy Sheets("Sheet2").Cells(Rows.Count, "A").End(xlUp).Offset(1, 0)
Assuming that Sheet2 is blank, this of course copies the rows to Sheet2 starting at Cell A2 and down column A. I would like to modify the code so that I can specify at which row the copy should start. For example, I might want to start the copy at A1 instead of A2, or at A10 instead of A2.
I have a spreadsheet where I track resources needed on a project. Each resource that is selected in the resource column has a corresponding % avg and an average number of months where the resource is used. % Avg and # of Months are found in a different worksheet.
What I am looking to do is, for example: if resource A will be on the project starting in May 2015 and assigned at 30% for 7 months, I want to populate 30% starting in the colunm labeled May 2015 and copy the 30% so that a total of 7 months are populated. Also, if any of the values change (i.e: the Resource Name or the Start Month) I want to erase all the percentages that were entered in the row. How can I achieve that with a VBA code? I have formulas that retrieve the # of Months and the % Avg already.
These are the columns that I have in my spreadsheet:
Resource NameStart MonthJan-15Feb-15Mar-15Apr-15May-15Jun-15Jul-15Aug-15Sep-15
I have a worksheet that will have tabs added as time goes by and a macro within the workbook currently selects all of the sheets and copies and pastes formulas within all of the sheets simultaneously. Right now, if a tab is added, the macro needs to be updated to select that specific tab name as well.
I would like to simply have the macro select all of the sheets starting with "IL" until the sheet before "reference", or all sheets except the first 3 and the last 2 if that is easier. Any ideas? And thank you for your help, you people really amaze me sometimes!
I am trying to create a spreadsheet to record vehicle mileage at the end of each week, however sometimes we cannot input the information until 2 or 3 weeks later. I am looking for a way to auto fill specific cells when the user inputs the information using a userform. On the attached spreadsheet:
The first button input an 'Empty Row' ready for the new week and current mileage. The second button opens the userform to select the vehicle, date and input the mileage. I cannot figure out how to have the mileage inserted into the correct cell irrespective of when we insert the information.
I have an excel sheet with a few buttons which open up separate user forms:
The first button "Add Exhibitor" works by bringing up a user form which enters data into the separate excel sheet called amends in the next available row, the data is initially selected by a stand number which if it already exists in the "amends" sheets brings up an error.
The second button "Modify Exhibitor" is what i am having the problem with. When the user clicks this button it brings up an identical form but for modification. What i need it to do is when the user selects the stand number in the drop down box: For example: H1-A-01, i need it to pull the data from the row in the "amends" data sheet which matches that stand number and put it into the user form so the user can modify and make changes, i would ideally like to be able to track these changes as well.
I am new to VBA and have tried many things so far online, i have managed to get the company name from the correct row and column to work but i cant figure out how i did it or how to make the rest of the data do the same?
The code i am using is below & an example of the form with data removed can be downloaded from here: [URL] ....
[Code] .....
I have a sheet with names and subdividers (Ent, Ver) on the columns, and dates on the rows. I am trying to make a form update the sheet when the name, ent or ver, and date match. I have attached a copy of my sheet to help explain that. I don't know much vba, but I can make a userform just fine. Trouble with most places is that the userforms only update based on empty cells, not based on more complex criteria.
View 7 Replies View RelatedI have a userform with 5 text boxes and a command button.
I also have a sheet with a large amount of data on it, arranged into sections with headings (sheet1).
The user will enter the section heading he desires into textbox1, then other data into all of the other text boxes. Then click the command button.
I need a code that will search sheet1 for the heading they entered into textbox one, then find the next empty cell BELOW the heading (in the same row). It will then put whatever the user entered in textbox2 into that cell, textbox3 in the cell directly to the right of it and textbox4 to the right of that one, and so on.
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
Sheets("ee template").Copy After:=Sheets(3)
ActiveSheet.Unprotect
Selection.ClearContents
Range("I7").Select
Selection.ClearContents
Range("C7").Select
Sheets("source").Select
ActiveCell.Offset(0, -11).Range("A1").Select
