now I thought about recording the macro, but it's an offset and if you click the chart, then it'll mvoe somewhere else even though the charts are always placed in the middle when generated. So I think I need to place it in a specific range. I want to use XY coordinates or range labels or something to that effect but would like something to this affect:
With Charts.Add
.ChartWizard source:=Worksheets("sheet1").Range("a1:a20"), _
gallery:=xlLine, title:="February Data"
End With
I got that in VBA help, but I'm not using Chart wizard, my code just creates the chart from the data on its own with specific chart type. So anyway, how would I make it put each of my five charts for the 25 people in the same place for every person. Performance Errors etc etc etc all will go in the right place everytime, regardless if you start with the page scrolled. I should do range right, but how do I change this macro to do it without chart wizard...just a chart that's already created and named. QUESTION: How do I place charts that are created from a data source onto a specific area of one worksheet, and those charts are always in the same place regardless of the person'a name.
I'm working on an assignment that pulls information for different countries and I'd like to know how to go about placing the charts on a specific area. Any help would be greatly appreciated!
The concept:
With each click of a country, the country's information will be pulled from a 'data dump' that I created in the same file. The map and flag are also shown. Some of that information is just using lookups, or a combination of lookups and code, and the hardest part are the GRAPHS - which I'm having a really hard time placing and adjusting accordingly.
The problem:
As of now the charts are automatically filled as the user clicks a new country, but all of the charts are placed in weird locations, but I'd like for them to be placed in the specified ranges above.
I am after a macro to do the following, my visual basic skills are very limited (non existant):- Look at the date in cell A1 on Sheet 'Live Report' and err 'remember it' Copy a range of cells from A3 to A10 on 'Live Report' Go to sheet 'Monthly Summary' and find the date that had been remembered previously (this date will be in column A on 'Monthly Summary' which will probably be a mixture of values and formulas). After the date has been found paste special and transpose the 'values only' copied range from 'Live Report' (A3 to A10) in column B on 'Monthly Summary' next to the date that has been found in Column A.
I'm making a Userform for commands I use a lot, like concatenation and highlighting cells. I placed a command button on the sheet that pops up whenever I open Excel. It's a bit awkward to have it on the sheet. Is there a way to place the button on the ribbon to get it out of the way? (I'm on an intermediary level with VBA
Another alternative would be to make a hide button on the userform, I guess. Once it disappears though I'd probably need another button to call it up again.
Let`s assume that I have numerous "Serial Number" in "Sheet1" : http://i40.tinypic.com/2iqbspt.jpg
Now I want to create some cards in "Sheet2" that each card have a serial number that related serial number there is in "Sheet1" : http://i43.tinypic.com/34fz690.jpg. Need easy solution for doing it while when I drag one card to copying it then related serial number in sheet1 would be appear in required field. I mean first card has first serial number of sheet1 and second card has second serial number of sheet 1 ; but I want to doing it quickly with dragging.
find a way to place a value of 1 (or a text "email sent: mm/dd/yy") in a specific cell on each row when an email is sent out through some VBA code I currently have. Then when the workbook is opened on another day, the code will look to see if that cell (target) is populated so that it doesn't trigger a second, third (repetitive) email every time the workbook is opened.
The spreadsheet contains rows of many clients, and growing every week. The code needs to be designed to search through each row, along a specific column (lets suppose column R beginning at row 7). When it finds the target rows blank, the code will turn each target cell red, as well as trigger a message box alerting that follow-up action is required.
I'm trying to copy a worksheet and place it at the end. I will rename it afterwards. I'm using the following code but it doesn't work.
Private Sub Copy_sheet() Dim wbk As Workbook Dim wsh As Worksheet Set wbk = ActiveWorkbook wbk.Worksheets("Template").copy After:=wbk.Worksheets(wbk.Worksheets.Count) Set wsh = wbk.Worksheets(wbk.Worksheets.Count) wsh.Name = "New Sheet" End Sub
I am trying to create a basic order history in excel from orders generated on our limited ERP system. I have exported the data required and imported to excel, but due to the export limitations, I can only export certain fields at a time. This means that I have to create three sheets for all the data I require.
The first sheet has the bulk of the data and is now nicely collumned. However, I cannot get both the customer code and full customer name on the same sheet due to the aforementioned limitations. Sheet 1 has customer code and other data, sheet 2 has customer code plus full customer name.
I have created a collumn for the customer name on sheet 1 (A3) next to the customer code (A2)
Basically, what I am trying to get it to do is as follows: In "A3" I need to create a formula that states that if A2 contains a certain customer code, then look in sheet 2, match the code and place the full customer name for that code. Bearing in mind that we have over 395 customer codes in use, so asking for a specific code to lookup would be as time consuming as entering the codes manually.
In Column A, anytime a specific "text" appears, I want to concatenate the information in the row, and place it into worksheet Data-list under a specific heading.
[URL]
The formula I would use (not vba) is =IF(A3="FN",B3,""), then I just copy it all the way down. However there are 27K cells, which is why I want a VBA Code
but now i want that when this new sheet will open there will be some labels, textboxes and buttons n etc will be appear on that sheet so how can i display these elements on new sheet dynamically ??
I have two workbooks, one a database that accumulates data over time, and the other a monthly report that needs to be populated based on information from the database. When moving data between the two, the following works fine (snipped a lot for ease of reading):
As you can see, it simply puts the month from a cell in the database into the report workbook. However, if I change Range("A1") to Cells(1,1) I get a runtime error:
I can generally work around this issue by changing the active workbook, but doing so is a big pain. Is there any way to use the second bit of code without popping an error message?
I need to copy/cut and paste an Html table from a website into and Excel sheet without the data being transposed. See link for the table I need to get into Excel:
I have created a macro that populates five (5) charts based on a huge data base in the same excel file, on a different worksheet. There are 25 names, and each have 5 of the same charts.
Performance Compensation by Base Errors Countries Homelands
Jane has 5 charts: Performance, Comepsnation by Base etc Joe: Jill:
I want for each Performance to move to a certain location, each Compensation to move to a certain location etc for each chart. When I run it, the charts are populated but I want to move them - don't I have to name the chart (not the title) to make it work? How do I name the name the object chart?
I have a work book with prob close to a thousand individual work sheets in it. I have a goup of cells that are the same in ever work sheet that I would like to pull and place into a master work sheet. I dont want to copy and paste each one, I'd be a hundred before I finished and I dont have that kind of time. Im thinking a macro might be what I need but Im not very good with useing them let alone making one to fit me needs.
i've a little problem @ work. Each morning i've to insert some data of the day before and update 2 chart with some series moving the seriescollection frome 5 days before to the data that i've inserted in that moment. I'm trying to do a macro that do automatically that "seriescollection shift" to avoid to do that manually for each seriescollection of each chart each morning. I mean (maybe i've been not very clear) i usually click on the chart series, then i can see the range data source and using the mouse i move this range 1 column in plus on the right mantaining width.
I am working on automating a report via vba code where the range of the chart needs to be changed every time the macro is run. Basically the chart is a snapshot of performance of 6 months .
For example : if the chart is already displaying Jan - Jun data , when the information for July is added and report updated the chart should be updated to reflect Feb - Jul data .
There are many graphs but have added 2 sample here for ref .
I have made a chart in Excel to show the half life of cells for a science project so it basically has days along the horizontal axis and percentage on a logarithmic vertical axis. However, the horizontal axis always appears at the top of the chart when I use a vertical log scale (if i dont use logs then its at the bottom where it should be). Is there any way i can move it to the bottom? i've tried everything i could think of under "format axis".
I have an Excel chart graphing two data records. As the data points cross, one is in "back" and one is in "front". I would like to reverse the current layout. Is this possible?
I have a Excel workbook with two sheets - 'MainDataSheet' and 'ArchiveSheet' .
The 'MainDataSheet' has 5 columns and one of the column is 'status'.
The 'MainDataSheet' will have a command button 'MoveData' which will trigger the VBA macro to move data rows from 'MainDataSheet' to 'ArchiveSheet' . Only the rows having value set to "MOVE" in the 'status' column have to be moved.
I would like to change the greater than number to the value in cell 'I11' in sheet 'Linear Programming Data' and the less than number to the value in cell 'I12' in sheet 'Linear Programming Data'. The code I am using was done by recording a macro since I don't know how to code in vba.
Code: Sub Results2() ' Results2 Macro ' copy table filter power by greater than and less than Sheets("Finalizing Results 2").Select Cells.Select
I have a large document with a lot of names listed. I want to make up new sheets for each person listed. Is there a formula that I can enter that will move the entire row based on the person's name? See attached.
Currently i hav list of info that is long like this.
A 1 B 2 C 3 D 4 E 5 F 6 G 7 H 8 I 9 J 10
How to move row to column example below. Because i want the data to be printed on an a4 paper which can fit around 3 row to save space . If i manually copy paste page by page it is too much.
A 1 D 4 G 7 B 2 E 5 H 8 C 3 F 6 I 9
===
Currently i have macro code which roughly does this.
A 1 B2 C3 D4 E5 F6 G7 H8 I9 J10
Sub test() Dim rng As Range, m As Integer, c As Range Columns("c:E").Delete m = 2 Set rng = Range(Range("a1"), Range("a1").End(xlDown)) Set c = Range("a1") Do While c <> "" 'MsgBox c.Address
Range(c, c.Offset(m - 1, 0)).Copy Cells(Rows.Count, "c").End(xlUp).Offset(1, 0).PasteSpecial Transpose:=True Set c = c.Offset(m, 0) Loop End Sub
I am working on the attached price proposal and need my user to be able to enter a number into column E indicating that that row should be printed on the quote. The 'quote' can be new sheet or another area of current sheet that is formatted to look like letterhead.
In versions prior to Excel 2007, I was always able to copy a chart when I copied a tab. However, when I copy a tab in 2007, the data copies fine, but the chart does not. Something similar happens when I try to move a tab with a chart on it to another workbook.
