I am working on a concrete pour summary, I would like to have the specific codes on each tab be affected from one summary page. So when I enter a certain number on sheet 1 , it will affect that same number section that is on a different sheet. It will be adding a certain amount to that code section every time its entered. What functions need to be used to make this work..?
View 6 RepliesI am working on a concrete pour summary, I would like to have the specific codes on each tab be affected from one summary page. So when I enter a certain number on sheet 1 , it will affect that same number section that is on a different sheet. It will be adding a certain amount to that code section every time its entered. What functions need to be used to make this work..?
View 3 Replies View RelatedIn my header I am trying to show the current page number and the total number of pages in the workbook. So if I have 10 pages in my workbook, page 5 would read "5 of 10".
I have this in my header "&[Page] of &[Pages]". All worksheets with 1 page read "1 of 1" and worksheets with 2 pages read "1 of 2" on the first page and "2 of 2" on the second page.
I need to pull a reference number and assign it to all records in a particular section. The code I recorded keeps going back to the first section. Also would like it to repeat until all records have the reference number attached.
06010-100Beginning Balance07/09/2004AD06011-10007/23/2004AD06011-10008/06/2004AD06011-100
06011-100Beginning Balance07/09/2004AD07/23/2004AD08/06/2004AD
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 10/14/2008 by acantu
'
'
Selection.Copy
Selection.End(xlDown).Select
Selection.End(xlDown).Select
Range("C7").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("B7").Select
Selection.End(xlDown).Select
Range("C63").Select
Range(Selection, Selection.End(xlUp)).Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Selection.End(xlToLeft).Select
Selection.End(xlDown).Select
Selection.End(xlDown).Select
Selection.End(xlDown).Select
End Sub
I wrote an excel program in Excel'03 for a dental office to manage state assistance patients and one of the table columns is the state assistance number. The problem is that the program defaults to a number format when it is entered instead of a text format, which is what I want. The issue is that state assistance numbers are always 8 digits and when it defaults to a number field the program drops the required preceeding zeros.
For example the number 00123456 will sometimes show up as 123456, which is wrong. It's like sometimes it will show up right and other times it gets a butterfly in its brain and deletes those zeros irritating the receptionist here. So, how do I get the table to either stay in text format or set up a number format that keeps the preceeding zeros?
I have attached an example. If I have a set of numbers such as the one attached, is it possible to create a formula that will show me all the combinations of numbers that add up to 55.52? In the attached I have highlighted in different colours all the number combinations that add up to 55.52. The numbers highlighted in blue appear within more then one combination. Is there a formula that can do this for me, instead of randomly adding numbers hoping they add up to 55.52.
View 1 Replies View RelatedI have attached an example. If I have a set of numbers such as the one attached, is it possible to create a formula that will show me all the combinations of numbers that add up to 55.52? In the attached I have highlighted in different colours all the number combinations that add up to 55.52. The numbers highlighted in blue appear within more then one combination. Is there a formula that can do this for me, instead of randomly adding numbers hoping they add up to 55.52.
examples.xlsx
How to translate a specific number into a specific letter related to the number itself.
I have lots of different numbers for example all going down a specific cell (These numbers I want to separate into 3 different catagories. The positive numbers I want to be calculated as the same Letter that is next to that row directly over to the left of that cell.
So if the letter
B / cell / cell / +9 / Then I want if its a positive number like +9 to answer in the formula with the same letter (B) listed to the right in the same row in a different cell of course
B / cell / cell / -6 / Then I want if its any negative number like -6 to answer in the formula as the opposite Letter of (P) listed to the right in the same row in a different cell of course
P / cell / cell / +17 / Then I want if its a positive number like +17 to answer in the formula as the same letter (P) listed to the right in the same row in a different cell of course
P / cell / cell / -3 / Then I want if its a negative number like -3 to answer in the formula as the opposite Letter of (B) listed to the right in the same row in a different cell of course
and thirdly if its a (0) zero and only (zero's) Then I want the answer to stay (0) zero.
The number can be any numbers it doesn't matter. Only distinction is that positive number of +1 and up repeat and stay the same letter that the cell on the far left is already stated.
and all the negative number of -1 amd below all reverse the letter to the opposite letter of (B to a P) or (P to a B) listed to the right in the same row in a different cell of course
and of course (0) zero would be listed as a positive number and only return a (0) zero as the result of the formula.
I would like to create a vba script when ran an input.box comes up and asks you to "enter number you want to start numbering from" and when the number is entered in the input box. e.g "7654", excel starts numbering each cell in column A from 7654 until there is an empty cell in column B.
View 7 Replies View RelatedIs there any quick way of passing an array to a group of cells ?
It is easy enough to place an array of numbers in a spreadsheet as follows:-
Is there a way to have Excel alert me (via cell color change preferably, but another method would be fine also) upon entering a number that has already been entered on that worksheet?
The problem I have:
I have 10 columns in a worksheet that I keep track of serial numbers in for work... Sometimes someone enters the wrong serial number or doesn't update a serial number so we will have the same serial number in two different places and another agency will call us to correct our mistake, making us look inept.
I figure the best way to alert people of this input error would be to change the fill color of both, or the active, cell(s) so they could immediately begin looking into the problem.
I am looking to publish some workbooks to the masses as a mht (single web file), but I had a couple of questions before I did that:
Is it possible to have a hyperlink to a hidden or very hidden page in the same workbook?
or
Is it possible to hide some rows and have the hyperlink unhide those rows when selected?
Also, will the areas be exposed when opening the .mht?
i want a macro that will start on D25 and enter a 1 for five rows up to D29
than change and enter a 2 starting on d30 and enter a 2 for five rows
up to D34 than change an enter a 3 up to D39 ....... on and on up D225.
I am trying to get a single number from a web query table without downloading the table to a worksheet. I would like to either turn the table into an array in vba or just extract one number from the table. In this case it would be the "This Week" result or array(2,2) position in the table.
The website:[url]
I have tried messing around with the destination for the webquery object but cannot get it to work unless the destination references (directly or indirectly) a worksheet range.
Is it possible to programmatically determine the page number on which a specific cell will print?
View 14 Replies View RelatedI have this question for indentifying the last row (number) for each and every page to be printed.
As I am using a loop to determine the last row of the table in each print page, I am only able to do in "hard coded". And with this "hard-coded" row number, I can set bordering to the table so that table will not be printed without any border (for in between pages if table is more than a page)
But the problem is that I had discovered that once any other user start using wrap text, or even change the row height, the macro will still captures the pre-determined no. of rows to do the bordering (as shown in my code).
In my, I had restricted the zoom size so that the quotation will always be the same format. Hence, based on this control zoom, the printable page changes if the row height changes too.
With destSh.PageSetup
.PrintArea = "$A1:$H" & LastR
.PrintTitleRows = "$1:$21"
.Zoom = 62
' .FitToPagesWide = 1
' .FitToPagesTall = 8
.PrintErrors = xlPrintErrorsDisplayed
.RightFooter = "&8Last Saved : " & _
Format(ThisWorkbook.BuiltinDocumentProperties("Last Save Time"), _
"yyyy-mmm-dd hh:mm:ss")
.CenterFooter = "Page &P of &N"...................
Is there any way to show the number of page (1 of 3, 2 of 3, and so on) in a cell ??? (like when we're in PrintPreview mode)
How could I do that ??? (if it's possible )
I have a long list of items that I need to add what I call tag numbers too. I need the numbers to reset at the top of every page
page 1
item1 101
item2 102
item3 103
item4 104
page 2
item5 201
item6 202
item7 203
Is there any macro or formula that anyone knows of that will reset my numbers on every page break?
I'm trying to figure out for my boss also I've done some search in this forum but no avail. He want each page to have large faded page number in the background like 'Page 1', Page 2' etc(there's 12 pages in one sheet) for presentations but do not want the page numbers to appear in the printed copies. Is it possible? I know about the watermark but he does'nt want page numbers in the prints
View 3 Replies View RelatedNot something I've ever had to do before as i generally work with data sheets, i'm creating a document to print but need the page number to start from a set value and not default "1" of "10" etc,
I need it to start from say "5" of "15" rather than the "1" of "10",
Its simple to do in Word, but like i say not something I've ever had to think about in Excel.
I have a excel file to print label on a label printer.I've added additional file in this message.I'm printing different numbers of labels with this file.for example, if I print 10 pieces of labels, I want to write 1/10 , 2/10 , 3/10 etc. on each label.I finded a vb code to print this work but not exactly the way I want.I would ask one of excel guru's to look at my file.
View 8 Replies View RelatedI have a selected area which I print as labels.
I want to have a number on this label preferably counting back from the quantity of print.
So if I select 300 copies to print, the first label shows somewhere 300, the 2nd label 299, the third 298 and so on.
I use a button and macro for printing selected labels, so perhaps the reverse printing could be added there if only counting up is available.
Also to make it easier, a cell on the sheet can contain the number to count down from (this is preferred on thinking about it) So I could then print 20 labels from 300 to 280 say.
Is it possible to have a Page Number (e.g. Page 1 of 10) directly in Cell without going to the Footer or Header.
View 4 Replies View RelatedI am interested in printing an entire workbook in one shot with multiple tabs, where each tab is one page. I would like to print the tabs such that the first tab has the number '1' in the footer, the second tab has '2' etc. And I don't want to go into each tab and type the number in the footer.
Does anyone know how to easily make this happen?
What i'm looking to do is create a spreadsheet where the first page allows me to input the number of teams in the group.The teams cannot play others in the group except the ones they are paired with. eg. "Enter number of team pairs in set" (in this case 4)
Team 1a vs Team 1b
Team 2a vs Team 2b
Team 3a vs Team 3b
Team 4a vs Team 4b
After number of teams in set is established click a start button on the first tab of the spreadsheet.
this auto generates a new tab with all the possible win/loss combinations of 4 team pairs.
New Picture.jpg
if the number of teams on Tab 1 is changed (say to 6) and the start button is clicked, another new tab is generated with all possible win loss combinations of a 6 team set.
remember 1a vs 1b can only be win or lose and the win lose combinations are for the set of 4 matches ( or more matches if specified on the first tab and clicked).
if you put 7 in for the number of team pairs then it would be win loss combos for 7 pairs of teams.
I am trying to find a way to print an "entire workbook", but have each of the sheets paged as a group separate from the rest. One workbook typically has up to 20 sheets, with each sheet up to roughly 8 pages. I need each sheet set to show page 1 of 8 or page 5 of 8, not page 22 of 53. Counting and typing in the total number of pages in each sheet's footer is too cumbersome. Also, printing each sheet individually has also been cumbersome when printing to PDF. Are there any other ways to have the "&[Pages]" function only reflect the number of pages within the sheet instead of in the entire workbook?
View 9 Replies View RelatedI'm trying to create a macro to help me with a running issues list. I what to be able to have an issues column and a fix coulumn. Then I'll have an open issues section and closed/fixed issues section. all issues that do not have any Information and date in the fix colum will stay in the open section unitl the fix is entered and then when I run my macro it will move any open issues that have data in the fixed column to the closed section)
View 2 Replies View RelatedI'm struggling with getting my Excel worksheet to fit nicely on the pg for printing to .pdf. I could tinker with column widths manually to work this out for a printed report. But I need to print a couple hundred reports with varying column widths, so I need a vba solution.
The context is that I'm using vba to process two sets of interlinked data on a worksheet. I only want to print one set of data, and keep the second set out of the print view. To do this, I'm keeping the first set of data in columns 1 to 10 and the second set of data in columsn 21 to 30. I set the print range to only include columns 1 to 10.
This works fine for keeping the second set of data off the printed pg. The problem is that there is always a gap between the end of column 10 and the maximum width of the printed pg. Given the formatting of the report, this doesn't look very good.
I know that page setup offers the "fit to" option. This would work if I wanted to fit everything on the worksheet on the pg, but I don't. I just want to fit columns 1 to 10 to the pg. Is there a way to do this, allowing for varying widths in columns 1 to 10? Is there a way to do it via vba?
I have a workbook that has 9 different tabs in it. Once all the information has been completed throughout the workbook, is there a code that could transfer specific data on each page to a different colum on that same page? I need to do this for 9 pages at one time. The information is listed differently on each page. I need to transfer data from the current data column to the previous data column once the entire workbook has been filed out.
View 2 Replies View RelatedRefer to the "Example" file I have uploaded. Basically I want to turn table on the left to something similar to the table on the right by adding an additional column to put in card number related to the transaction in each row, so I have information of the transaction and its corresponding card number in the same row.
Example.xlsx