I have a quite complex list of variables to put into a formula to come up with the correct number and I need some help to figure this one out. I don't know if it would be easier to set up a chart and then index the chart to do a lookup or how I need to go about doing this to achieve the most efficent solution.
I need the following to go into one formula:
1. =< 24 needs to show the number 24
2. =< 30 but > 24 needs to show 30
3. =< 32 but > 30 needs to show 32
4. =< 36 but > 32 needs to show 36
5. =< 40 but > 36 needs to show 40
6. =< 48 but > 40 needs to show 48
7. =< 50 but > 48 needs to show 50
8. =< 60 but > 50 needs to show 60
9. => 60 needs to show 60
I am trying to set up a spread sheet to figure square footage of plastic laminate countertops, but the plastic laminate only comes in several stock sizes : 3x8, 4x8, 5x8
3x10, 4x10, 5x10
3x12, 4x12, 5x12
So if I have a countertop that is 25 sq ft., I cant use a 3x8 (24 sq. ft), so I need to go up to the next size which would be a 4 x 8.
I might need to use a ROUNDUP function with this formula too? I already have cells set up to figure the depth, backsplash height, and front edge height and then give me the squage footage of that.
I'm having trouble with a small vba macro. At the end of the macro I test to see if two variables are equal and then print out true or false. However, for some reason even though the variables are equal vba is not treating them that way. I have put the values that represent the variables on a spreadsheet and used the if(x1=x2) formula and it says it is true, also, when I debug the macro and watch the values when it comes to test the logical expression the numbers are the same. I don't understand why vba does not say that the two variables are equal. I have attached a screenshot of the breakpoint where I double check the values are equal.
How to correct my formula because it does not work?
Here the formula: =COUNTIFS(Data!C2:C24005,A17,Data!M2:M11149,"<=0")
I need to insert the formula in column C (Findings tab) which counts the rows in Column M (tab named "Data") that equal A17 (Column A in "Findings" tab) and which are less or equal zero. In addition if I drag the formula down I want to only the values be entered in highlighted in blue cells in column C (SKUs With Zero Sales in "Findings" tab) and empty cells in not highlighted cells. I attached images of these two tabs: Data and Findings.
revised this code to reflect the "not equal to". I want the user to only enter "In" or "Out." Therefore, If cells b19:B26 does not have either word, then the message box will prompt the user to enter the correct word again. I think my code needs to be revised into some kind of loop.
I've created the following function that chooses the maximum value from a set of cells then inserts theappropriate row number (within a table) into a new cell.
It's working fine until I have 2 cells with the highest value. The above statement is entering the first cell that meets the criteria in the new cell but ignores the fact there maybe 2 (or more) of the same value.
How can I get both (or all) to be entered in the same cell? Is there a better way, maybe highlighting all the rows in the table that equal the max figure?
I am confusing of using the equal function in vba, I need to have some cells between sheet1 and sheet to be equal but i cannot just put = sign in the sheet as it may be deleted. Can I have it as VBA code? how to do that and where to put this code, in what event?
I have 31 cells in a row (one for each day of the month. we collect data in these cells by typing "y" or "N". based on these input, cell 32 calculates the percentages based on total of Y's. Cell 33 has goal percentage. So, if the goal percentage is 30, Is there a way when a "y" or "n" is entered in cell 25, if the data percentage is = or 5% above the goal to get text message saying "good" but if the data percentage is 5% or more below goal, get a "not good" message?
I am having trouble creating a formula that will do what I need it to do. In C4 the I already have a formula that states if B4 is greater than 94.99% then it will equal 5. What I need it to do is if it is equal to or greater than 95% then =5. Also if it is equal to or less than 94.99% - 92% =3 and if less than 91.9% =1. Here is the worksheet I am using....
How to recreate the formulas used in my old database. One important factor is that:
In the old database, once you type in a word, it associates it to a number, and also adds that number in a further row. how do i do this?.
EXAMPLE: - i have the word "sitter" that = 10.25$. If i enter "sitter" in column F, it enters 10.25$ in column M. - Likewise, i can also have the word "private" that = 13.50$. If i enter "private" in column F, it enters 13.50$ in column M.
I have a cell, M87. The score in M87 can be less than 13 or greater than 25. I need a formula within M94 which refers to M87, and outputs depending on the the following criteria. If M87 is less than 13 then output as D. If M87 is 14, 15, 16, or 17 then output as C. If M87 is 18, 19, 20, 21, 22, 23 or 24 then output as B. If M87 is greater than 24 then output as A.
I have a simple formula which subtracts one cell from another. I then have an if and statement which checks if that cell is equal to zero. If so, continue processing.
The problem is that the formula always reads the cell as not equal to zero although the result of the formula contained in the cell does result in zero.
I have a spreadsheet with Golf Stats on it, and on my latest import, the lookup stopped working. I am no longer able to look up any of the golfers names.I have attached a portion of the spreadsheet as an example.Lookup Failure.xlsx
Before the data was pulled in 'last name','first name' but is now 'first','last'... so that explains why I have the lookup column in Column A, because it used to convert the last,first format to first,last but that is besides the point. What my real problem is not being able to lookup Column D. As you can see in Cell L4, I tried to test if K4=D4 (Both say Nicolas Colsaerts but Excel does not say they are equal).
I'm trying to build a summary table with 5 columns. Each row will equal the data from 5 cells on one sheet into the 5 columns. Like last name, first name, date of hire, rate of pay, and so on. I'm trying to find how to write a formula or function that will work like A2 will equal $A$8 on Sheet 1, A3 will equal $A$8 on Sheet 2, A4 will equal $A$8 on sheet 3 and so on. There will be over 100 sheets so I would like to avoid having to link each cell manually.
I would like to program an Input Box that looks at the cell next to it to see if there is a value equal to zero in it. If there is a Zero in the cell an Input Box will popup and ask "what was the result". It would keep going down the column until there are no more values in column A.
In this example the Input Box would popup for the second line and the third line and then populate the values entered into C2 and C3 accordingly.
I have a set of numbers (representing time), and I need a macro that will generate a split of these numbers that both have an equal sum (or as close to equal as possible). Also, everytime the macro is run, a different split should be created.
I am trying to hide rows if cetain cells in that row equal zero using a button on the page. Each cell has lookup formulas that will return a value. If coulmn B,F & I have a value of zero I want to hide the row. As of right now I am using the following code but I keep getting the following error message runtime error '13': type mismatch
Here is a copy of my code and I am Having a problem trying to get it to filter zero balances out. There are positive and negative numbers and I need to post them to a seperate sheet and exclude all zeros.
I am not sure if I am using the correct terminology when I see "array". What I want to do in VBA is what I know how to do in non-vba excel functions (cntrl + shift + enter). For example, I have a range of cells that need to meet one condition ( ""):
Code:
If Sheet8.Range("C" & rw) "" Or Sheet8.Range("D" & rw) "" Or Sheet8.Range("E" & rw) ""...etc Then
How do I bundle this in one package. What you see below is obviously incorrect, but I am trying to accomplish this with proper syntax.
Code: If Or(Sheet8.Range("C" & rw & ":Z" & rw) "")
