I have this formula:
=SUMIF(B1,">=C3:C5000",F3:F5000)
Cell B1 has a date
Every cell in column C has a combination of dates
Every cell in column F has a balance
I want to add those balances only if they are less than or equal to cell B1... w/my formula I get zero.
I have written the formula below:
=SUMIF($A$10:$A$77,"
I am new to using SUMIF. I successfully wrote a formula telling it to sum one column for each row in another column where it equal "Forecast*". Now, I want to write a formula that says to sum a column for everything in the other column that does not equal "Forecast*". I tried using , but either it did not work, or I did not use the right syntax.
View 5 Replies View RelatedOn A3: D10 I have information on C1 a have date and E3:E10 I will input date
i.e. If the date entered in E3 is the same as or larger than the date on C1 then Blank the entire line A3: D3
I have a simple sumif formula that says =SUMIF(W61:W112,"<30",J61:J112). In column W, there are values ranging from 0 to 5000. If the formula is written like it is above, it excludes summing values from column J when the cell in column W equals 0. Why is this? I can just add another function that says sumif "=0", but I don't think I should have to.
View 3 Replies View RelatedIn the expense log, Column C is a list of Dates and Column I is a list of expenses. I want to Sum the expenses in the 'Expense Log 09' to a new sheet based on a Date entered in H24 on the new sheet. I have tried the formula as shown below and Get the result #NAME?
=SUM(IF(Expense Log 'Expenses Log 09'!C8:C100,H24,'Expenses Log 09'!I8:I100)). I would Like to SUM all expenses After the posted date including that date.
What I have is the project name's in B5, B6.....B117
In C5 I have a start Date of the project
D5 Calculates the if it is over or under time.
I only enter dates in the (red Accent 2 80%) what i call a pinkish colour.
Now it seems to work if the dates flow from one cell to the next.
What I need is to work out a way to allow any part of the project to be completed (Could be at the end or middle) and it not give error and work correctly. I need it to basically look for dates entered and grab the date that is equal to the date entered in that row series or the next date down....
I have todays date in cell A2. I have a range of dates in a row 4 and numbers below each date in row 6. What i want is to Sum the numbers below the dates in row 6 if the date in row 4 is with in 90 days before or after the date in cell A2.
Example......
The answer i should get is 4 since only 3 dates fall 90 days before or after todays date.
I have start date(Column A) and an end date(Column B) in two columns and I have found out the difference between them in column C in hh:mm:ss format. I want to find out how many cases are greater than 2 Hrs but less than or equal to 4 Hrs.
View 9 Replies View RelatedReport I generate once a month that checks to see if tasks are done on or before their due date. Sometimes it works, and others it doesn't...
The basic formula is: [Code] .....
If they closed their task by or before the due date, the condition should be true and it should output "Compliant" beside their task. Otherwise their "Over Due".
The forumla works except when they close their task ON the due date. No matter how I tweak the forumla, it thinks the condition is false as if it cannot tell when the two dates match.
I am using something like this to copy data from one workbook to another
View 2 Replies View RelatedIn my Excel spreadsheet I enter todays date in a single cell (A2), then I list various dates that jobs come into shop in other cells (A8:A108). I have cells ( F8:F108) where I have been manually entering an asterik (*) for those jobs equal to or greater than five days old in cell (A2). Is there a formula that can do the math for me? I've tried Excel help but to no avail.
View 3 Replies View RelatedI have a spreadsheet with two colums with dates. The names of the ranges are 'DataContractualStartDate' and 'DataContractualEndDate'.
How do I manage to count the no. of records with equal dates at the same row?
I have used the following but this gives me zero, while in the example below the result should be 3.
=COUNTIFS(DataContractualStartDate,DataContractualEndDate)
The table looks as follows:
dContractualStartDate
dContractualEndDate
01-05-2012
01-05-2012
[Code] ....
I have contarct for amount $5000 with a start date of 1/1/2014 - 3/31/2014 (3 months). I would like to equally split my amount based on my number of months between 1/1/2014 and 3/31/2014 ie $1666.66/per month.
View 4 Replies View RelatedI'd like all Cells in column AC (e.g. AC$3$:AC$517$) to be filled with yellow fill if the cell value is any date greater than or equal to today. Any past dates can be left blank (for now)
=$AC3>=TODAY()
how to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values.
I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008.
CREATE TABLES LIKE BELOW?Column A Column B Column C
March 1, 2008Saturday
March 2, 2008Sunday
March 3, 2008Monday
March 4, 2008Tuesday
March 5, 2008Wednesday ...................
I have faced with a problem with Excel when I wanted to find the average for a stock price.
I have 2 columns:
1st Column: Dates from 1st May 2007 till 23th December 2008 (Rows:A3:A403)
2nd Column: Stock prices from 1st May 2007 till 23th December 2008 (Rows:B3:B403)
How can I reflect the correct trainee count for Day1-Batch1?
Currently columns F,G,H computes for expected, actual and total variances of trainee respectively reference to the training date J3.
Since this is a 2-day per batch even, I could not capture the 1st day trainee total of every batch because I divide the sum by 2 (2 day / training batch). The sum is only corrected on the 2nd day.
Attached herein is the sample file.
Just getting into Excel and lookups want to SUM a 'Profit' colum if the date colum is less than TODAY - I basically have a set of data - 1 sheet per year where the dates are displayed dd/mm I want to achieve the SUM of the Profit Colum if the date is less than or equal to todays date (dd/mm only) for the year so we can compare year on year.
I just became a member of your forum, so please forgive me if I am not concise enough or take too long.
I imput the number of hours associated with week ending dates.
A C D
Date Hours OT
01/08/2006 6 2
03/12/2006 8
04/16/2006 3 1
I need to add up the hours for each quarter for Hours & OT
Jan-Mar
Apr-June etc
This is what I came up with, but it doesn't give me the correct value
= SUMIF(A3:A75,"<="&DATE(2006,03,31),C:C)
I have the following formula and it works.
=SUM(IF(AND((Transfers!B6="Labour"),(Transfers!C6="In")),Transfers!G6,""))
Basically the sheet 'transfers' has a column named type and one named in/out, the current formula I have does a logical test on both of these and then if they are both true takes the cost of it from a column named cost. This works fine for single rows. However on another sheet I am trying to use the above formula but there will sometimes be more than one entry for the same date on the sheet 'transfers' and all the same dates that meet the logical test's conditions need to display the sum of the cost on this other sheet.
I am trying to get a SUMIF formula to work where the following: - RANGE = Column N:N (These are all a list of dates) CRITERIA = Cell C20:D20 (These are the dates i want to look at) SUM_RANGE = Column P:P
Basically, I want to SUM all the numbers on Column P where the date in Column N falls between and including the dates in Cell C20 and D20
In attachement, I want to show in the YELLOW cells the SUM of Column P where the Date in Column N is between the Dates in column C and D.
I am trying to find a formula for column D on the PO Costs EOY sheet. My criteria is as follows:
1. Column b on PO Costs EOY= Column A on Fabric and accessories
2. The order date in Column A is equal or in between the dates on rows 3 and 4 in fabric or basket accessories
3. I do not want to include in the some anything before order date, ie, if the order date is 8/8, i only want to sum 8/9 and greater.
The order date will always be on the last day of the week. So the sum would start the follow week.
I am working on a report for work with the following formula:
=SUMIF(A5:G8,AND(between 1-1-13 and 1-31-13,"soft cost"),G5:G8)
my formula is "IF A5:G8 IS BETWEEN JANUARY 1st 2013 AND JANUARY 31st 2013 AND ALSO IF IT IS A SOFT COST THEN GIVE ME THE SUM OF THAT ROW"
Pretty much column A contains different dates and column C indicates whether a cost is a "hard cost" or a "soft cost". If the date is within the month of January AND if it is a soft cost, I need the dollar amount in column G summed-up (must meet both criteria - January and soft cost).
Im Trying to use a formula of countif or sumproduct
so the formula will read the range of cells from A2:A30 to see if the word Hydro is in any of those cells, then if the date range from Cell B2:B30 is from range =>Dec-01-2007 to =<Dec-31-2007, then it will count 1.
[Code] ........
But this formula doest count.
I've tried using a multiple if count if with arrays and sumproduct. I really want it to count the ammount of time the work hydro is used during the month on december .
I am trying to use a date range as a criteria in a SUMIF function. Below are the data and formula I am using.
Forecast
6
4
15
8
Week
1/12/2014
1/19/2014
1/26/2014
2/2/2014
Formula =SUMIF(G2:J2,">L1",G1:J1)
G1:J2 - raw data shown above. L1 = 2/2/2014. Desired result = 8. Result obtained with formula above = 0 how to make this work?
I am trying to sum multiple columns of data by a sumif based on a criteria in column C, the columns are weekly dated, and I wish to match columns by offset this initial column with a start date and end date and sum columns in between, I have been getting close but only returns one columns values?
SUMIF(FilterCol,$C17&I$9,(StartCol:EndCol))
FilterCol is column for criteria match
Start Col is name range - OFFSET(FilterCol,0,'Summary totals line groups'!$G$4,1,1) - End col similar, (G4 is a match date to find column ref)
I have a column of hours spent working on a particular task, but I only want to add the hours that fall within a two week reporting period.
Is it correct to use the SUMIF formula? If so how do I write the formula to include the date range desired? Would it go under 'criteria'?
I have data which is exported from my system which includes the job date and gross profit amount. I want to find the gross profit total for each day based on a matching date. However, the data exported includes the time in the date cell and Google Sheets won't match it. I'd like to avoid using a helper cell if at all possible.
You can see the formula here : [URL] ....
Formula is on the Q column.
I am trying to do a sumif off all dates that fall into a specific year. I know I can do it by either adding a column in either of the sources to get the translated data but I was wondering if I can get this to work by it recognizing the format within the formula only.
View 4 Replies View Related