I'm trying to count if there are situations where column a is equal to a specific number and column b is equal to another number.
both columns are numbers. Does anybody have a good idea how to do this, maybe countif, but i am not sure how to do more than one item with that.
I have the following datas as an example;
A1: %90
A2: %100
A3: %75
According to those datas I want to get the following results;
B1: On going
B2: Done
B3: On going
So basically I want to tag columns which are equal to 100% as "Done", and the rest is as " On going".
I can assign a number of copies to print by adjusting ActiveWindow.SelectedSheets.PrintOut Copies:= , but what I want it to have the number of copies auto adjust to the value of a cell that contains a formula. I was hoping it would something as simple as Copies:=cell but no luck...
View 2 Replies View RelatedFor this example, A1 is the given at 19.875 I am trying to get A2 to net a result of 19.5. A2 is to net that result by searching through cells B1:B14 and finding the nearest equal or lower number. If A1 is less than 13.5 a result of "error" should be generated in A2.
B1=13.5
B2=15.5
B3=17.5
B4=19.5
B6=21.5
[Code]...
For column "B" count all the 1's if column header is equal to name in column A.
For Column "C" needs to be checked if a value was filled in column "I" if yes then check if in column "L" has a value, count all these values.
I need to look up the name in E2 in the list in column A and if it matches then lookup name in F2 in list column b, if it matches then the corresponding number in column C is displayed in column G. If neither names are in the 2 columns the words"Not on lists" is displayed in cell in column G.
The other problem is one name is spelled two different ways I want it to look for both spelling before moving on to looking up the second name.
I started with this formula but I'm getting #N/A or "not on list" when they are on the list. I'm using ranges prod_sum is columns AthruC, Last_name is range BthruC. =IF(AND(VLOOKUP(F4,prod_sum,3,0),VLOOKUP(I4,last_name,2,0)),"not on list")
I have a sheet where i want to delete duplicate rows where column A and column B combined are equal, i.e. range(Ax:Bx) where x is the current row. I am using the macro below but cant seem to get it working as I keep getting a type mismatch error and Im not sure why.
View 2 Replies View RelatedHow to recreate the formulas used in my old database. One important factor is that:
In the old database, once you type in a word, it associates it to a number, and also adds that number in a further row. how do i do this?.
EXAMPLE:
- i have the word "sitter" that = 10.25$. If i enter "sitter" in column F, it enters 10.25$ in column M.
- Likewise, i can also have the word "private" that = 13.50$. If i enter "private" in column F, it enters 13.50$ in column M.
I currently, manually create my production work orders using excel (in-house ERP system not good enough).
Rather than manually type in the names of products to be produced, I would like to have the number 1 = a production item and 2 = another and so on.....So basically when I type 1 in a cell it will automatically display a production item.
I imagine this to be a process where i would type all the names of my production items in individual cells, then create a formula to make 1 = a specific cell, 2, 3, 4, etc.....
If square A1 says deposit account and c1 has a figure in it, i want g1 to repeat the figure,but if a2,a3 etc says something other than deposit account i want g2,g3 to remain blank.What is the formula for square g1etc?
View 9 Replies View RelatedI am looking to do the following:
Say I enter the following values into a spreadsheet:
5
7
4
24
32
Is there a way to enter the value "36" and have Excel find the two values of 32 and 4 which add up to 36 for me? I will obviously be dealing with much larger spreadsheets and would like to somehow save time by not having to hunt down possible combinations of the total value I'm searching for.
I'm looking at test results and would like to know how many times in a row correct answers were given before getting one incorrect. The way I have this currently set up, is if a student has the answer correct it returns a "TRUE" value, and a "FALSE" value for an incorrect answer. A typical test may have 50 questions, so I would have either "TRUE" or "FALSE" values in rows A1 through A50.
So I've been trying to figure out a formula that counts the number of times "TRUE" rows repeat 'consecutively' in a given column, in this scenario column A. The formula would need to check the current row and if "TRUE" check the row immediately after, if that row is also "TRUE" then check the row immediately after that, until it runs into a "FALSE" string, then display that total count of consecutive "TRUES" in another cell. I understand there may be duplicate results but I'm only really interested in the longest value, so duplicates can be ignored.
If it makes the formula easier, each possible result can be assigned to it's own cell. Let's assume the test has 50 questions. So if a student got all 50 questions correct the result count would be 50 in cell B50, or if they got 25 correct before the first incorrect answer, cell B25 would say 25, etc. I'm guessing I could then easily query this column for the largest value to come up with what I need at a glance.
I would like to create a vba script when ran an input.box comes up and asks you to "enter number you want to start numbering from" and when the number is entered in the input box. e.g "7654", excel starts numbering each cell in column A from 7654 until there is an empty cell in column B.
View 7 Replies View RelatedI have two date columns, a start date and end date. Another columns tells me the number of days between these two columns. It may return 45 days which actually straddle 3 different months.
My aim is to identify between this date range how many days in Apr 14. Then in the next column howmany days in May 14 etc
So on the spreadsheet Id have 12 columns for each month of the year. in Apr 14 for each row between the given date range I want it to tell me how many days are actually in April. Id then copy that formula into the May 14 column.
I am using cell V7 to input the formula but I want cell V7 to tell me if the number in U7 is greater than or equal to the individual #'s in cells U7-U40 and I would like it to put a 1,2,3 in the cells of V7-V40 for the three highest numbers in order of largest to smallest if is this possible?
View 3 Replies View RelatedIn my Excel spreadsheet I enter todays date in a single cell (A2), then I list various dates that jobs come into shop in other cells (A8:A108). I have cells ( F8:F108) where I have been manually entering an asterik (*) for those jobs equal to or greater than five days old in cell (A2). Is there a formula that can do the math for me? I've tried Excel help but to no avail.
View 3 Replies View RelatedI have a spreadsheet with two colums with dates. The names of the ranges are 'DataContractualStartDate' and 'DataContractualEndDate'.
How do I manage to count the no. of records with equal dates at the same row?
I have used the following but this gives me zero, while in the example below the result should be 3.
=COUNTIFS(DataContractualStartDate,DataContractualEndDate)
The table looks as follows:
dContractualStartDate
dContractualEndDate
01-05-2012
01-05-2012
[Code] ....
The following code doesn't seem to work for me except when I use an actual number.
Set MR = Range("A1:A100")
For Each cell In MR
If cell.Value = "*3L*" Then cell.EntireRow.Font.Bold = True
Next
I am attempting to bold the entire row if the macro finds text that begins with 3L in a tab. If I change the code to look for a number, then it works fine.
Also - Is there a way to make this run on specified tabs? For instance, if I have four tabs:
January
February
March
Q1
Say I only want it to run on the January, March, and Q1 tab, how would I go about doing that?
=COUNTIF(A19:A28,(AND(B19:B28="YES",C19:C28=5)))
What is wrong with my formula above? I am trying to count Colunm A if the value of Column B is "YES" and Column C is equal to "5".
I'm trying to count the number of incidents in column BB that are >0 but only IF the value in column E is "Abbeywood". i.e. how many times there's a figure greater than 0 for Abbeywood. I can't seem to get count if to do this!
View 4 Replies View RelatedDividing column in equal parts divide a column in groups with the same rows and the same total sum? For example, I have the column A as following:
8,942
2,807
2,568
5,818
5,818
596
8,942
4,390
1,607
890
8,772
1,103
The total number of rows is 12 and total amount is 52,254
I want to divide the column in three equal parts with the same total. So each group must contain 4 rows with the total sum 17,418
I have a table full of phone numbers and call durations.
In A2:A6160, I have 162 different phone numbers and in U2:U6160, I have the call durations for calls made to those numbers.
In a separate spreadsheet, I have each number listed in Column A and in Column D, I want to display the average call duration for each of the numbers.
I am working on a proforma statement, REFER THE ATTACHMENT
A B C D E F G H I J Q
1 jun'14 jun'14 jun'14 jul'14 jul'14 jul'14 Aug'14 Aug'14 Aug'14
2 beg. Inv Purchas Unit Sold Beg. Inv Purchas Unit Sold Beg. Inv Purchas Unit Sold
3 foundation 4 10 11 3 15 13 5 16 18
4 Lipstick 4 10 11 3 15 13 5 16 18
5 Shimmer 4 10 11 3 15 13 5 16 18
6 Powders 4 10 11 3 15 13 5 16 18
7 Nail Lacquer 4 10 11 3 15 13 5 16 18
8 Eye Shadows 4 10 11 3 15 13 5 16 18
9
10
11 Total Purchase for june to aug 2014
12 Foundation ??
this is just an small sample of what i am working on i have got purchases, cogs and ending invenory for 2 years Products wise i want to add purchases for the particular product.
i.e. if for above data i want to find out the foundation purchased through june 2014 to aug 2014 what will be the formula
This formula in E1 has worked before. I have attached an example, in reality Column A and B have 2000 rows and column D about 250 randomized numbers out of Column B that need to be paired with their equal in Column A.
View 4 Replies View RelatedI need to apply two criteria to a COUNTIF. Eg, I need to count if one column is equal to "N" and another column is equal to "N/A", taking both criteria into account. At the moment it seems to knock one out when I try applying both!
View 9 Replies View RelatedI am trying to use the following formula to count the number of times a day appears in a column. It doesn't seem to be working the way I want it to. =COUNTIF($A13:$A200,"Sunday"). It could be the way the days of the week are gathered on the sheet, you can see the attached workbook to see how I am using it.
View 4 Replies View RelatedI have three columns: Symbol, Dividend Payment, and Shares.
What formula will look at the shares column and symbol column and say if cells in column C are equal each other & cells in Column A are equal to each other than add all the div payment that correspond with those symbols and shares?
A
B
C
D
1
Symbol
Dividend Payment
Shares
Sum (Formula would go here)
2
SEB
.75
23
3
SEB
.75
23
(result desired) 1.5 (B2+B3) because (add the dividend where their symbol (A2&A3)and shares (C2&C3)are equal) both conditions have to apply to add div payment
[Code] ......
I need to group all records where the values in column A are equal. BUT I needed them sorted by another column (the whole sheet, not just within each group). Currently, all of the values in column A are listed in random order. Is there any way to do this manually?
to elaborate a bit further, consider the following:
Columns: A-B-C-etc.
1-Z...
1-X...
4-X
3-Y
4-Y
2-Z
Basically, I need to group all of the "1"'s and all of the "4"'s so that the extra values will show underneath the other. HOWEVER, I need them to be sorted such that the order in which they appear are XYZ. So the goal would be:
1-X
1-Z
4-X
4-Y
3-Y
2-Z
Starting in cell F3, if Column F is greater than or equal to zero, delete the entire row and continue deleting rows until Column A has contents in it. Then go to Column F in that same row that had contents in Column A, if the contents in that row of Column F are greater than or equal to zero, delete the entire row and continue deleting rows until Column A has contents in it. Persist with this pattern until every row in Column F has been checked.
View 4 Replies View RelatedI need automatically deleting of whole row based on cell value, if value of cell which is in h:mm format, is less than or equal to 2:00 (h:mm)
So far I got.
Code:
Sub FillDownFormula()
Code:
Range("L2").Formula = "=RC[-3]-RC[-2]"
Range("L3").Select
Columns("l:l").Select
Selection.NumberFormat = "h:mm"
Dim rng As Range
[Code] .........
