I am trying to set a scorecard up where it will give points depending on the % actual. For example:
if less than 60%, then 0,
if equal to or greater than 60% but less than 75%, then 1
if equal to greater than 75% but less than 80%, then 2 and so on.
I have been playing around with the example below, but can't seem to get it working.
[php]=IF(A1<60%,0,IF(A1>A1<75%,1,))[php]
Maybe it 's because I pickled my brains last night.
Is it possible to do an IF formula based around a value it does not equal?
eg I have one column, that is perforning a SUMIF providing that a certain cell is equal to a particular constant.
=IF([cell]=[value],SUMIF([range],[criteria],[sum_range]))
In the next column I want to do it the other way round so that:
=IF([cell] DOESNOT=[value],SUMIF([range],[criteria],[sum_range]))
Is it just a simple symbol??
I have a simple formula which subtracts one cell from another. I then have an if and statement which checks if that cell is equal to zero. If so, continue processing.
The problem is that the formula always reads the cell as not equal to zero although the result of the formula contained in the cell does result in zero.
i want formula in b1 to get the formula in a1 without Equal Sign
A1=(A2*A3)+2
Reults B1 should be (A2*A3)+2
I am new to using SUMIF. I successfully wrote a formula telling it to sum one column for each row in another column where it equal "Forecast*". Now, I want to write a formula that says to sum a column for everything in the other column that does not equal "Forecast*". I tried using , but either it did not work, or I did not use the right syntax.
View 5 Replies View RelatedI need a formula that looks at the total in H40 and if the number is between 32 and 40 I need it to return the number then if the number exceds forty I need to multiply the overage by 1.5 and add it to the 8 for a total of 11.
I think it would be something like:
SUMIf(H40>"32",
I have three workers for which I am counting the data from using a countas formula. The cells are A1,B1,C1 and I want to highlight in another formula to the right if these three values do not equal each other, I have tried and if formula referencing each of the combinations of the compares however it does not work in the desired fashion.
View 3 Replies View RelatedI have a code which will delete all rows where the value in column C is blank. However my formula is column C is the following:
=SUMPRODUCT(--(ENERGY!$B$5:$B$147=B15),--(ENERGY!$E$5:$E$147=A15),ENERGY!$C$5:$C$147)
Is there a way to change this formula so that if a value is not returned, I get a blank cell?
how to set up an equation for an unknown variable in a formula equal to 0 (an Even-Money Probability Formula for Risk Arbitrage assessments).
The formula is as follows, where I am attempting to solve for Pe:
(Pe*EP)+(P2*EL)=0
Pe=even money probability (placed in column B1 in Excel)
EP=expected profit if deal closes (placed in column B2 in Excel)
P2=probability of deal breaking up (=1-Pe) (placed in column B3 in Excel)
EL=expected loss if deal breaks up (placed in column B4 in Excel)
B1*B2)+(B3*B4)=0
So, once again, I am attempting to solve for Pe, or column B1
B1=(-(1-B1)*B4)/B2
say, EP (or B2) =$2.00 and EL (or B4)=-$4.00
B1=(-(1-B1)*-4)/2
B1=2*(1-B1)
I would like to use IF function, to get the answer, if the mark is less than or equal to 20, the answer is AVERAGE, if the mark is between 21 and 25 the asnwer is GOOD, if the mark is between 26 and 30 the asnswe is VERY GOOD, if the mark is above 30 then the asnwer must be EXCELLENT.
View 4 Replies View RelatedI have two date columns, a start date and end date. Another columns tells me the number of days between these two columns. It may return 45 days which actually straddle 3 different months.
My aim is to identify between this date range how many days in Apr 14. Then in the next column howmany days in May 14 etc
So on the spreadsheet Id have 12 columns for each month of the year. in Apr 14 for each row between the given date range I want it to tell me how many days are actually in April. Id then copy that formula into the May 14 column.
I have a formula in Excel2003 that is working fine except for when D12 is blank. When D12 is blank I want the result to equal either zero or blank.
=IF(ISBLANK(E12),NOW()-D12,E12-D12)
Report I generate once a month that checks to see if tasks are done on or before their due date. Sometimes it works, and others it doesn't...
The basic formula is: [Code] .....
If they closed their task by or before the due date, the condition should be true and it should output "Compliant" beside their task. Otherwise their "Over Due".
The forumla works except when they close their task ON the due date. No matter how I tweak the forumla, it thinks the condition is false as if it cannot tell when the two dates match.
I'm trying to set a cell on one sheet to be equal to the product of two cells on another sheet. The problem is that one of the cells on the other page is dependent on the variable T. This is what I've got and it's giving me errors
Worksheets("Output").Range("K14").Formula = "Worksheets("Calcs").Range("D17")*worksheets("Calcs").Range("D17").Offset(10+T,0)"
When I record a macro it gives me this, but again, I need the last cell in terms of "T"
ActiveCell.FormulaR1C1 = "=Calcs!R[3]C[-7]*Calcs!R[14]C[-7]"
I'm having trouble with a small vba macro. At the end of the macro I test to see if two variables are equal and then print out true or false. However, for some reason even though the variables are equal vba is not treating them that way. I have put the values that represent the variables on a spreadsheet and used the if(x1=x2) formula and it says it is true, also, when I debug the macro and watch the values when it comes to test the logical expression the numbers are the same. I don't understand why vba does not say that the two variables are equal. I have attached a screenshot of the breakpoint where I double check the values are equal.
View 2 Replies View RelatedI can assign a number of copies to print by adjusting ActiveWindow.SelectedSheets.PrintOut Copies:= , but what I want it to have the number of copies auto adjust to the value of a cell that contains a formula. I was hoping it would something as simple as Copies:=cell but no luck...
View 2 Replies View RelatedSUMIFS with less than & more than
I found this thread which works for normal ranges
I want to Sum for Values Greater than a specific date in my formula.
This first one works for a specific date (Relevant reference in red), so say 01/01/2014
Code:
=SUMIFS(Table2[[#All],[Basic]],
Table2[[#All],[Cluster]],Table3[[#Headers],[Company]],
Table2[[#All],[Start Date]],Table3[#Headers],
Table2[[#All],[Perm / Temp / Prof / ETA]],[@Company])
Code:
To Sum for ranges >= 01/01/2014, I have tried this below based on the thread above but Excel does not accept this.
=SUMIFS(Table2[[#All],[Basic]],
Table2[[#All],[Cluster]],Table3[[#Headers],[Company]],
">="Table2[[#All],[Start Date]],Table3[#Headers],
Table2[[#All],[Perm / Temp / Prof / ETA]],[@Company])
Simply need a cell to count another cell is equal to certain value.
For example if B3 has a value of 6 then I need J3 to equal 1 or if B3 is equal to 3 than I need G3 to equal one. I tried the the COUNTIF but I am sure i am using it incorrectly.
Trying to find the sum of all cells in the array described in the formula that are equal to the values inside the quotations. I used this exact (as far as I can tell) formula to find the sum of values that were NOT equal to my quoted values and it worked just fine. Any ideas why formula 'A' will not work but formula 'B' does work? I have a feeling I'm missing something simple here!
Formula A - Does not work:
=SUMPRODUCT(--('Master Lead Sheet'!$J$2:$J$10000=$B2),--('Master Lead Sheet'!$N$2:$N$10000="REJECTED"),--('Master Lead Sheet'!$N$2:$N$10000="CONDITIONED"),--('Master Lead Sheet'!$N$2:$N$10000="APPROVED"))
Formla B - Works:
=SUMPRODUCT(--('Master Lead Sheet'!$J$2:$J$10000=$B2),--('Master Lead Sheet'!$N$2:$N$10000"No Answer"),--('Master Lead Sheet'!$N$2:$N$10000"Disconnected"),--('Master Lead Sheet'!$N$2:$N$10000"Wrong Number"),--('Master Lead Sheet'!$N$2:$N$10000"EMAILED"),--('Master Lead Sheet'!$N$2:$N$10000"needs to be emailed"),--('Master Lead Sheet'!$N$2:$N$10000"Refund"),--('Master Lead Sheet'!$N$2:$N$10000"REFUNDED"))
This is for mileage purposes. I have two sheets. 1st sheet I have Date, From, To, Mileage. I want the Mileage cells to automatically equal the mileage it is from and to. Right now I have it setup like this on the 1st sheet B7 is Date, C7 is From and D7 is To and E7 is Mileage. I have a drop down menu for C7 and D7 for our facilities such as Ming Ave (MNG), Coffee Rd(COF) and so on. On the 2nd Sheet I have the chart that show the miles.
example MNG to COF is 8.3 miles.
How to correct my formula because it does not work?
Here the formula: =COUNTIFS(Data!C2:C24005,A17,Data!M2:M11149,"<=0")
I need to insert the formula in column C (Findings tab) which counts the rows in Column M (tab named "Data") that equal A17 (Column A in "Findings" tab) and which are less or equal zero. In addition if I drag the formula down I want to only the values be entered in highlighted in blue cells in column C (SKUs With Zero Sales in "Findings" tab) and empty cells in not highlighted cells. I attached images of these two tabs: Data and Findings.
I'm trying to count if there are situations where column a is equal to a specific number and column b is equal to another number.
both columns are numbers. Does anybody have a good idea how to do this, maybe countif, but i am not sure how to do more than one item with that.
I have a quite complex list of variables to put into a formula to come up with the correct number and I need some help to figure this one out. I don't know if it would be easier to set up a chart and then index the chart to do a lookup or how I need to go about doing this to achieve the most efficent solution.
I need the following to go into one formula:
1. =< 24 needs to show the number 24
2. =< 30 but > 24 needs to show 30
3. =< 32 but > 30 needs to show 32
4. =< 36 but > 32 needs to show 36
5. =< 40 but > 36 needs to show 40
6. =< 48 but > 40 needs to show 48
7. =< 50 but > 48 needs to show 50
8. =< 60 but > 50 needs to show 60
9. => 60 needs to show 60
I am trying to set up a spread sheet to figure square footage of plastic laminate countertops, but the plastic laminate only comes in several stock sizes : 3x8, 4x8, 5x8
3x10, 4x10, 5x10
3x12, 4x12, 5x12
So if I have a countertop that is 25 sq ft., I cant use a 3x8 (24 sq. ft), so I need to go up to the next size which would be a 4 x 8.
I might need to use a ROUNDUP function with this formula too? I already have cells set up to figure the depth, backsplash height, and front edge height and then give me the squage footage of that.
Example If Selection.Value *Does not equal* ActiveCell.Offset (0,1) Then .....
View 1 Replies View Relatedrevised this code to reflect the "not equal to". I want the user to only enter "In" or "Out." Therefore, If cells b19:B26 does not have either word, then the message box will prompt the user to enter the correct word again. I think my code needs to be revised into some kind of loop.
View 9 Replies View RelatedI've created the following function that chooses the maximum value from a set of cells then inserts theappropriate row number (within a table) into a new cell.
=IF(J27=0,"?",IF(J27=J19,1,IF(J27=J20,2,IF(J27=J21,3,IF(J27=J22,4,IF(J27=J23,5,IF(J27=J24,6,IF(J27=J 25,7,IF(J27=J26,8)))))))))
It's working fine until I have 2 cells with the highest value. The above statement is entering the first cell that meets the criteria in the new cell but ignores the fact there maybe 2 (or more) of the same value.
How can I get both (or all) to be entered in the same cell? Is there a better way, maybe highlighting all the rows in the table that equal the max figure?
If/then statement:
Trying to say if C2 is equal to Fee, Fixed, then C2 should be equal to S2.
Was trying to use
=IF(c2=Fee, Fixed,c2=S2,C2)
but, don't think I have it quite.
I am confusing of using the equal function in vba, I need to have some cells between sheet1 and sheet to be equal but i cannot just put = sign in the sheet as it may be deleted. Can I have it as VBA code? how to do that and where to put this code, in what event?
View 3 Replies View RelatedI have 31 cells in a row (one for each day of the month. we collect data in these cells by typing "y" or "N". based on these input, cell 32 calculates the percentages based on total of Y's. Cell 33 has goal percentage. So, if the goal percentage is 30, Is there a way when a "y" or "n" is entered in cell 25, if the data percentage is = or 5% above the goal to get text message saying "good" but if the data percentage is 5% or more below goal, get a "not good" message?
View 3 Replies View RelatedI am having trouble creating a formula that will do what I need it to do. In C4 the I already have a formula that states if B4 is greater than 94.99% then it will equal 5. What I need it to do is if it is equal to or greater than 95% then =5. Also if it is equal to or less than 94.99% - 92% =3 and if less than 91.9% =1. Here is the worksheet I am using....
View 15 Replies View Related