VBA Error Goto Previous Line / Statement Not Resume Next
Aug 10, 2012
I have some code below. I have error handling in place for when it tries to open a specific file. If it isn't there then user has option to continue and ignore this file, or browse and select a new one.
The problem is, when the user wants to ignore the file, the "Resume Next" continues to run the VBA assuming the file was ok i.e. the code after the line to open the file. What I would like is for it to skip the succeeding code and go to look for the next file.
Below is the VBA:
Code:
For i = 0 To 2 Step 1
'add in error handling for if the file is missing
On Error GoTo MissingFile
Workbooks.Open Filename:="\hbeu.adroot.hsbcdfsrootgb002hfcfinance01fnce" & qfolder & "Data" & qfile(i), UpdateLinks:=False, ReadOnly:=True
[Code] .........
Missing File:
qMissingPrompt = "There was an error opening data file. Click OK to browse or Cancel to ignore and move to next file"
qAns = MsgBox(qMissingPrompt, vbOKCancel)
'click cancel - ignore error and move onto the next file
If qAns = vbCancel Then
[Code] .......
So, where it says Resume Next, currently it will start running the following (after On Error Goto 0)
Code:
Set datawb = ActiveWorkbook
range("A2").Select
Do Until ActiveCell.Value = ""
etc.
What I would like it to do is go back to is to go to the next i
Code:
For i = 0 To 2 Step 1
Or even to go to the 'Next' statement at the end so that it moves onto the Next i and tries to open the next file.
i've got an error trap built in with "On Error Goto 40", but F8 on the very next line produces Runtime '9' error pop-up. Trying to check if sheet exists based upon value in A1 (number stored as text). If it doesn't exist, line 40 (and subsequent) creates it, looping back to the next value in column A and repeating. 1 time out of 10 it works perfectly,
I am getting this error and where th If not starts its is in red showing that is where the issue is:
HTML Code:
Sub RemoveRows() Dim LR As Long, i As Long Dim ws As Worksheet Set ws = Worksheets("100 Airports") LR = Range("B" & Rows.Count).End(xlUp).Row For i = LR To 10 Step -1
OK, so I have a userform with some text boxes that I have specially formatted to accept only date values in the form of mm/dd/yy. By default they are blank. I have a check in one of my codes that looks like this
Code: If DateBox vbNullString And DateValue(DateBox) > checkdate Then M1 = "NEOPRENE" & Chr(13) Else M1 = "" & Chr(13) End If
Where DateBox is this specially formatted TextBox and checkdate is a future date being checked against.So if DateBox has a value in it AND that value is greater than the date being checked against the returend string is Neoprene, otherwise it is blank.
Well the problem I have is when the first condition returns FALSE, i.e. when DateBox is empty, the DateValue half still gets evaluated and returns a type missmatch error or something like that because DateValue("") returns an error. I have line of code 8 times, one for Neoprene, squeegee, etc. So the name of the text boxes are each unique and I am using M1, M2, M3, etc.
For other reasons, use of "On Error Resume Next" doesn't work for this situation because it causes a result opposite to what I want to happen.
Cells.Find(What:="flags", After:=ActiveCell, LookIn:=xlFormulas, LookAt _ :=xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _ False).Activate 'if there is an error, ignore it and continue On Error Resume Next Selection.EntireColumn.SpecialCells(xlCellTypeConstants, 1).EntireRow.Delete Shift:=xlUp 'reset normal error handling On Error GoTo 0
I am finding the cell marked "flags", then in that column look for the special cell and delete the rows where they are found. It works when it actually finds those cells, but it reports an error when no cells were found.
Is there a way to resume running a code should there be an incompatible file that causes an error? Currently I'm reading a bunch of excel sheets, but there might be some sheets that aren't formated as such and cause an error 400.
Using the code I got from the Forum Drop Down I added the subs to put a custom command button in the right menu. The first thing it does is delete any existence of the menu item so that you don't get a new one every time you right click your menu. I has just a clear as day "On Error Resume Next". But when it encounters the delete command the error dialog pops up and says "Run time error 5. Invalid procedure call or argument."
Before doing some modifications in a data sheet, I first check with the below code whether a certain list is complete or not using the VLOOKUP function. If I encounter a missing value in the list, a userform appears asking to fill out 3 data fields, which are then added to the original list to complete it. All of this works fine if only one line is missing; if there are two (or more) lines missing, all goes well untill the VLOOKUP function errors out on the second line missing. I can't find out why everythign goes welll with the first missing line, but not with the second missing line.
Sub proCheckVesselCodes() Sheets("Sheet4").Select Range("K1").Value = "Check" Set varRange1 = Range("A1") fctCountNrRows varRow1 = varRow varRow2 = 2
I have written a Excel (2003) that searches a worksheet for a string in any cell. If the string is not found, it uses the 'On Error GoTo' command to jump to a given label. It works fine on the first string not found. When it searches for the next non-existent string, it fails with:
'Run-time error '91': Object variable or With block variable not set'
Do I have to clear a buffer after each cells.find search?
The following code shows the bare bones which illustrate my problem. The routine runs whenever the user enters a string which begins "Frm1=" and contains exactly three commas.
My problem is with the MsgBox which appears if the ErrorHandler is reached. With the following code the MsgBox requires two clicks on OK to dismiss it. If I change Resume to GoTo it requires only one. Is this normal? Is there any way of dismising the MsgBox with one click? ...
I have some coding under the property list command button which filters the date 3 times and copies the filtered data to another sheet. This works with data in the sheet, however if there is no data on the sheet I get an error message.
There is a line that says on error goto reset1 on the first filter and goto reset2 on second filter (and so on) which works on the first filter but not on the second or third filter. I have attached the file.
'Other actions are located here, but have been removed. These actions take place if the Find is succesful.
CubeNotFound: Message = MsgBox("WS ID " & WSID & " was not found! Excel will continue with the next WS ID.", vbOKOnly, "WS ID NOT FOUND")
Next x
I have that statement there because if WS ID is not found then VB generates an error that the user won't be able to interpret, and also stops the code. I want VB to continue to the next record if one is not found.
I am selecting cells from a range by using "SpecialCells" and need to determine whether this produces an error (as it does in the event that there are no cells that fit the criteria) so I write On Error Resume Next Then I check the error number and if it is not 0 the next line of code is skipped.
Within the same procedure I do this again, but on a different range and need to check the error number again. If no error is found, the previous error number will be kept so before running the second piece of code, I add the line Err.Clear Is their any difference between this approach or using the line On Error Goto 0
I am brand new and I don't know a ton about macros and programming in Excel.
What I'm trying to do here in this attached spreadsheet is at the end of inputting my line, I want to hit the tab (marked in red to make it clear where) button in the cell and have it automatically create another blank line but keep the formulas the same.
Basically I just want to avoid having to right click and insert line and then drag the formulas column by column down which is difficult.
See attached : TEST2_2014 Sales & Commission Spreadsheet.xlsx
So the issue I am having is that I have a worksheet with two long rows of value. If the user enters the incorrect value, the program gives a error case of 1004. If and when this error occurs I want the program to send a MessageBox to the user then end the program. The problem that I am running into is that whenever I write On Error Goto... It Goes to the label whenever any runtime error occurs. My belief is that there has to be a way to only check for a runtime error on a single line of code rather than the entire sub.
Difference between these two statements. The first one works perfectly while the second one returns an error. Also why is the best scenario to use IF and Then on a single line?
I have a number value in (e.g.) cell A1, and I want to display it in cell B1.
The number in A1 updates automatically from a website (and through a few regexp and other functions). Most of the time it displays a number, but sometimes it can be an error if for example the website connection doesn't work or something else is wrong.
I want to display the number of cell A1 in cell B1, but if the number in A1 is an error, I don't want to display an error, or a zero, or a dash, or anything of the sort you'd normally do, like =IFERROR(A1,"error"). I want to see the number there was in B1 before the error occurred. In other words I want to update the value of B1 only if there is a number to update with.
I have a formula, that is return a #Value! error for the blank cell that are referred to in the formula. How do I get rid of the #Value! error when I fill down? The formula works great.
I'm working on a spreadsheet that i have a long if statement and it keeps till me i have a error. I stated reading and come to find out you can only have 7 statement.
I am getting the Run-time error '380'. Could not set the value propery. Invalid property value.
I have a user form for data entry purpose which is working fine. Now, I am making a code for data editing purpose which pulls out data from the worksheet into the user form.
I am able to do this for text boxes and combo boxes that are not linked with each other. However I am getting a problem in the following case; I have a combo box and a text box that are linked to each other by combo box _change code which is below which may be the reason for the error I am getting for the next code...
Code: Private Sub cmbColor_Change() If cmbColor.Value = "Other" Then lblColor.Visible = True
see attached file. Need to find latest non blank value - in attached file it is highlighted in yellow. From there, want to summarise 26 weeks back so, in the attached file:
Row 2 would be finding 750 and summarised back 26 weeks from 30 sep 2012 Row 3 would be finding 2250 and summarised back 26 weeks from 2 dec 2012 Row 4 would be finding 5000 and summarised back 26 weeks from 4 nov 2012
I'm trying to use MATCH to identify the Column number that contains "DL_Error", then I'll use this Column # to select a cell (found Column # & "34"), but I get the error shown in the title of this post.
Here's my current Sub Macro15() ' Macro recorded 6/18/2009 by me Range(Match("DL_ERROR", "A31:CW31", 0) & "34").Select End Sub
