Macro: Selecting All Worksheets
Jul 16, 2007
I am currently working on a simple macro to help with formatting a spreadsheet. The number of tabs on the spreadsheet will change to reflect the number of companies I'm running reports for. But the same process is to be applied to each tab. The issue I'm facing is I don't know the appropriate code to select all tabs without specifically referencing them.
The code that I would like to apply to all tabs is as follows:
ActiveSheet.PageSetup.PrintArea = "$A$1:$J$85"
With ActiveSheet.PageSetup
.LeftHeader = ""
.CenterHeader = ""
.RightHeader = ""
.LeftFooter = ""
.CenterFooter = ""
.RightFooter = ""
View 9 Replies
ADVERTISEMENT
Apr 26, 2006
How do I modify this macro so that the worksheet array will select all the worksheets except sheet 1?? My workbooks will have varying numbers of worksheets ...
View 3 Replies
View Related
Mar 14, 2012
The code im using all worksheets. How do I make this sort all but the first
For Each WS In ActiveWorkbook.Worksheets
If WS.Name "Sheet1" Then
Range("A1:X2270").Sort Key1:=Range("A2"), Order1:=xlAscending, Header:= _
xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
View 1 Replies
View Related
Mar 21, 2008
I recorded the following macro to select all the worksheets in the Activeworkbook by clicking on the first worksheet and then hitting Shift Tab and selecting the final worksheet (thus '[Group] selecting' all worksheets in the active workbook).
Sub Macro1()
Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Select
Sheets("Sheet1").Activate
Range("A1:B2").Select
End Sub
How do you generalise the Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Select if the number and names of worksheets varies from workbook to workbook?
View 9 Replies
View Related
Aug 22, 2014
I want to make a range variable ("testrange") that I can use to define a range of non-continuous cells and then use that range variable to select that range of cells in different worksheets within the same workbook.
I tried the below code (simply coloring cells red), but get an error when I try to select "testrange" after moving to the next worksheet.
[Code] .....
The next worksheet is also supposed to have the same range of cells colored red, but I can only get it to work on the first active sheet.
I would like to avoid having to repeatedly rebuild the range I want selected each time I move to a different worksheet.
View 7 Replies
View Related
Mar 19, 2012
I have below code which I was thinking is very simple to select variable worksheets. However I get Debug error when running:
Code:
Dim rng As Range
Dim cl
Set rng = Sheets("Budgetted sku's").Range("A2:A24")
For Each cl In rng
Sheets(cl.Value).Select
Next cl
View 5 Replies
View Related
Jul 12, 2012
I have a workbook with 3 worksheets which contains a single spreadsheet where the user enters data and 2 worksheets containing all the named ranges and formulas(divided up by product model) used on the data entry worksheet. What I've been trying to accomplish is to choose one worksheet based on which product model I select on the data sheet.
View 1 Replies
View Related
Mar 10, 2014
Using VBA, I need to Select A1:C14.
The problem is that A1:C14 contains blank cells, and there is also an adjacent column D that I do not want to copy.
So, UsedRegion and CurrentRegion aren't doing it for me. (It selects Column D too.)
Obviously, this is an example...the real data set is an export and varies in size.
View 1 Replies
View Related
Apr 30, 2008
I have a workbook that I am continually adding and removing pages from. The pages are used together in groups of 3 and as a result are named 1.1,1.2,1.3; 2.1,2.2,2.3 and so on. I have a macro that works on sheet 1.3 and now need it to repeat on sheets 2.3, 3.3 etc depending on how many sheets I have open and active in the workbook. Is there anyway that I can create a macro that will work on all sheets that have titles ending in 3 and then end if there are no more? Thus it would work if my workbook goes to either 2.3 or to 7.3 and so on.
View 14 Replies
View Related
May 21, 2007
This should be so simple (I would have thought), but so far I'm struggling.
Using Range / Offset or something similar, I want my macro to select a certain cell (which is dependent on the data in another cell) on my worksheet so that the user can then input data into the chosen cell.
Something along the lines of:
Range("A1").Offset(23 + t4, 1).Select
[where cell t4 contains a number which dictates how many lines down I want it to jump]
View 3 Replies
View Related
Mar 8, 2013
The purpose of the excel sheet is hour administration. In the first page you fill in which group it is about, what week it is about and the amount of hours to change.
There are several other sheets named after the group that are filled with some kind of agenda.
An example: I want to make a change to the amount of hours group X will be there in week 3. I fill out the 3 columns (Group, Week, Hours) and hit a button. It should now check those 3 columns for data and modify the hours for the correct group. It is not done yet but I'm running into a problem already, the function I use to find the row with the correct weeknumber in the Group sheet returns wrong numbers and I don't know why.
VB:
Private Sub CommandButton2_Click()
Dim Week As Integer
Dim WeekRow As Long
Dim Groep As String
Dim Uur As Integer
[Code] ....
What I am expecting to happen is this: It checks A1, B1 and C1, selects the correct sheet, executes the function FindRowByValue (the week number is in column B) and fills Week Row with the result, then returns to the original sheet, gives a debug message and repeats this 5 times.
The debug message shows that the Week Row is not returning the row with the week number I filled in but instead returns either the week number itself (so if I wanted to find week 5 it returns a 5, while week 5 is in row 28), or a different number that is incorrect.
View 1 Replies
View Related
Nov 18, 2008
I have a comparison macro that compares one sheet with the next, it is called sub comp1 (). There is a condition whereby columns must be removed before sub comp1 can run. To remove these columns I run the macro called sub colcut (). What I need is the following action:
If cell BJ4 of current worksheet = "RE COMMENT" then run sub colcut () followed by sub comp1 () otherwise only run sub comp1 (). FYI The macro is to be run manually via a button rather than triggered by the value of the cell.
View 3 Replies
View Related
Nov 30, 2011
I run a macro on a spreadheet in which the rows increase daily. In the macro I simply recorded an end.down to select a column of data which ends up being fixed row numbers in the code so the next time I run the macro it only selects the range I selected last time.
View 1 Replies
View Related
Feb 18, 2012
I'm trying to make a macro'd button that when clicked will select the cells A1:A?? where ?? is equal to the value in cell B1
B1 is a variable number that changes to be the proper amount of rows that I require selected.
It's always A1 down to A9 minimum and A1 down to A400 max.
Once selected I need the macro to copy the selected cells to the clipboard for another application to be able to paste that info.
So far I've been able to get the copy command to work and the range command to work but can't seem to figure out how to put the variable number from B1 into the range command.
View 3 Replies
View Related
Oct 2, 2013
I've made a macro and spend some time making it work across different sizes of data. The last issue I'm having is after the macro sorted out some data, that it will then delete, it has to select the first row and shift select down before deleting it. However, depending on how the data is sorted, the first row could be 9, could be 10 and so on. See below for my code.
Code:
Sub Macro1()
Windows("statistik.xls").Activate
Range("A8").Select
[Code]....
If the first row in my data set is not one of the 3 criteria ("Personligt ejede virksomheder", "Privat", "Reklamebeskyttet"), then the first row # will be 10 instead of 9. If the first two rows are not one of the 3 criteria, then it would be row 11 and so forth. How do I make my macro take this into consideration?
View 4 Replies
View Related
Dec 26, 2013
I have spreadsheet with 13 sheets the first of which is a title page, what I wish to do is hide the other twelve sheets and somehow be able to select them from a drop down box (or similar what ever works with a macro)on the front page, the selected sheets would then appear unhidden.
I am OK with formulas etc but macros are beyond my ability even trying to follow examples & tutorials online has me lost.
The sheets all have specific but different names and none need to be selected more than once (although if possible it would be good). I understand where to put the macro in but as to how it is written ......
View 7 Replies
View Related
Jul 30, 2007
how can i select only duplicates using a macro?
i have a list in which i have a set of duplicate values i need to select only the duplicate ones using a macro to have them worked on
View 9 Replies
View Related
Jul 17, 2008
I am working on a VBA macro, using the following
With wsSheet.Range("A:A")
ReDim MyArray(1 To .Rows.Count, 1 To .Columns.Count)
MyArray = wsSheet.Range("A:A")
For i= 1 To .Rows.Count
For j= 1 To .Columns.Count
wsSheet.Cells(i, j+ .Offset(0, 3).Column) = MyArray(i, j)
Next: Next
I want to select alla values in column A, but when I specify the range as "A:A" the code results in an infinite loop! How can I come around this?
View 9 Replies
View Related
Oct 20, 2008
I created two radio buttons on a spreadsheet where a user can select
one button for Yes and the other for No. When I right click these
buttons, I notice the names (shown on the left hand side of the
formula bar) are:
Option Button 3 (for No)
Option Button 4 (for Yes)
I'd like to create a macro that automatically selects the Yes or No
button depending on a cell value in another tab. If the cell value is
1, the macro should select Yes. If the value is 0 the macro should
select No.
I tried running the macro below:
Sub testSelectYesOrNo()
If Not IsEmpty(Sheets("Sheet2").Range("A1").Value) Then
Select Case Sheets("Sheet2").Range("A1").Value
Case Is = 1
Sheets("Sheet1").OptionButton4 = True
Case Is = 0
Sheets("Sheet1").OptionButton3 = True
End Select
End If
End Sub
But when this runs I get a "Run-time error 438 Object doesn't support this property or method"
When I click debug, the text "Sheets("Sheet1").OptionButton4 = True"
was highlighted.
View 9 Replies
View Related
Jan 6, 2009
I have created the below macro to show the user (when he / she clicks on a button) how many days are left till the deadline day (taken from MS Project).
Sub DaysLeft()
Dim rng As Range
Dim count As Integer
Set rng = Sheets("Programme Reporting").[E2:E200]
count = Application.Evaluate("NETWORKDAYS(Today(),E3)")
Range("L3:L200").Select
ActiveCell.Value = count
End Sub
The range I want to output the days to is L3:L200 that seems to be okay. I have an issue with trying and putting a range in the NETWORKDAYS area, if I try and put in E3:E200 (the range of dates) it fails, as does $E$3:$E$200. At the moment the above code does work but it only puts in the days for one of the entries (E3).
View 9 Replies
View Related
Jan 28, 2014
I am trying to select rows in excel using a macro and then hide the rows, but i want to be able to add rows within this selection and still be able to hide the complete selection of rows.
The macro i am currently using is shown below: This hides rows 131 - 205, but if i was to add in another row in between so the range i now want to hide is 131-206 can i get the macro to update to this new range?
[Code] ......
View 10 Replies
View Related
Nov 13, 2008
I'm using a macro that picks up on changes in a active cell.. This is the code
HTML Private Sub Worksheet_Change(ByVal Target As Excel.Range)
If Not Application.Intersect(Target, Range("A:A")) Is Nothing Then
If Target.Value <> "" Then
ThisWorkbook.Sheets("Log").Cells(Target.Row, 2).Formula = "=Today()"
End If
End If
End Sub
There's a problem with this code, when select from a range and hit delete, i get a error mismatch. I want to have the macro ignore when i select active cell range of greater then 1.
View 2 Replies
View Related
Jun 15, 2012
Here is my macro
MyFileName = Sheets("Macros").Range("B1").Value
MyFileNameTwo = Sheets("Macros").Range("B2").Value
Sheets("Blank").Select
Sheets.Add After:=Sheets("Blank")
[Code] .........
Issue with array that's bolded The way it is set up is to rename the 3rd sheet to MyFileName and rename the last sheet to MyFileNameTwo. The file names will remain constant. They will always be the 3rd and last sheets, but the number in between will vary. Is there anyway to select the 3rd sheet through the last sheet to delete these? When I use the array it wants sheet names but those are based on multiple variables in other workbooks.
View 3 Replies
View Related
Mar 14, 2013
1. I need to paste data that is copied from an internet window into sheet1 without selecting the cell so that I can continue working on a data in sheet5. The macro prevents me from editing sheet5 in an orderly fashion because when it goes to paste the data into sheet1 it selects the cell in sheet1 interupting what I am trying to manually do with the data in sheet5. How to paste data into a cell withou selecting the cell so that my program stops interupting what I am doing in a different sheet?
2. My macro is meant for real-time defect monitoring in a production facility. The macro opens an IE window that contains the defect occurences, copies the data, pastes it in sheet 1 then sheets2 and 3 analyze the data, closes the IE window, and then waits for a time period before repeating the process. This macro is so slow though that it is hard to work on this file while the macro is running. How to run the macro in the background and speed it up so that I can continue working on Sheet5 of the file while the macro repeats itself over and over again? Here is my code.
The variable website is determined by earlier parts of the code that direct the macro to a specific network website.
Sub Half_Hour_Data
1
'Open Internet Window and Navigate to Website
Set myIE = CreateObject("InternetExplorer.Application")
myIE.Navigate Website
myIE.Visible = True
Application.Wait Now + TimeSerial(0, 0, 10) needed to wait until the page loads
[code]....
Is there a way to speed up the macro by removing the timeserials and just telling it to continue when the task is complete. Then run the whole thing in the background so I can work on another sheet while this program runs?
View 1 Replies
View Related
Jul 9, 2013
I have to select and cut a column with on several lines empty cells. I use the following code
'Range("c2", Range("c2").End(xlDown)).Cut' but this code select only the data till the first empty cell.
How can I select the whole column till the last cell. The column B is filled with data on every row so I think that I have to use the offset code.
View 2 Replies
View Related
Feb 27, 2007
i want to write a macro which searches for data in a xl sheet.It should then format that data in a particular format.The data can be present in multiple places.For eg. formating a 5*6 matrix which starts from d4 cell and a 4*7 matrix which starts from e15 cell(please note that d4 and e15 location are not fixed).
View 9 Replies
View Related
Nov 15, 2013
Whenever I try to use Sheets("Volumes").Select or .Activate on a specific worksheet, my macro code will immediately terminate with no error message. Iv'e used F8 to step through several modules and found that this happens every time it hits that line. The wierd thing is that i can select this sheet when screenupdating is off and I select it from a called subroutine. No other worksheets in this workbook are having this problem.
Additional info : using Sheet1.Select will select it with no issues but I don't want to go this route since it's a workaround and not a solution to somthing that should work.This problem occurs in several modulesEverything used to work fine and just one day it decided that i couldn't select the "Volumes" sheet in VBA anymore.I can click on the sheet no problem and it is not protected or hidden.
View 1 Replies
View Related
Feb 19, 2014
I have some reports that I run that go out to analyst daily and I use this script to merge all the documents together. They are the same everytime. However it includes a series of blank rows because the vba I use to create them I believe causes this. Is there a command to remove the VBA when merging them together. Here is the selection copy piece.
HTML Code:
'Import a sheet from found files
Do While Len(fName) > 0
If fName ThisWorkbook.Name Then
[Code].....
View 3 Replies
View Related
Feb 21, 2009
I want to be able to select a cell, for example A10, this would then run a macro that would copy and paste several cells of information along that row and paste it on another worksheet. However, if i then choose a15, a3, a79 in turn (using the control key), it would run the macro using those rows in turn.
i'm looking forward to hearing if and particuliar how this could be achieved.
View 13 Replies
View Related
May 30, 2013
I currently have this beast of a code running in Excel 2013:
HTML Code:
Sub OBTAIN_RAW_DATA_MACRO()
Dim NextCol As Long
'Copy data
Workbooks.Open Filename:= _
[Code] ........
However the issue lies in that once the data is refreshed, the slicers reading off the above raw data/pivots, automatically select all weeks, however this is not beneficial for the data being presented.
Is there anyway to have, once the Pivots have been updated, for the macro to then check and select current week range (beginning Monday) only?
View 4 Replies
View Related
