My Excel workbook is composed of 2 sheets. The first one is a Dashboard (Sheet1) and the second one (Sheet13) is where the data is.
I would like to press a button on the first one, enter the text to be found into an Inputbox and then copy-paste cells from the second sheet (containing the data) into the first one.
The data is structured in rows, from A to V columns.
I would like, according the row where is located the found cell, copy given given cells from Sheet13 to Sheet1.
Right now, I have a macro performing the search like desired and selecting the found cell :
Code:
Private Sub CommandButton1_Click() Dim FindString As String
Dim Rng As Range
FindString = InputBox("Entrer le contrat de support - rechercher (DSI....) ")
If Trim(FindString) "" Then
With Sheet13.Range("V:V")
Set Rng = .Find(What:="*" & FindString & "*", _
[Code] .......
I would like to copy cells located in the columns A, B, D, E, F, K, S, (T:U) from the row where the searched string has been found in Sheet13. It has to be copied on Sheet1, on two rows : (N29:Q29) & (N30:Q30).
When a new research is done, the previously copied cells should be cleared out.
2. The second point is about duplicating a button with an associated macro. The macro is running like I want but I have to insert 299 more buttons, with the updated formula according to the row where it is located.
However, one part of the macro has to stay the same because all of these 300 buttons increment a single counter located on Sheet1.
Code:
Sub Button2600_Click() If MsgBox("Etes-vous sûr de vouloir ajouter 1 année de support pour" & vbNewLine & Range("E7") & " " & "(" & Range("F7") & ")" & " ?", vbYesNo + vbQuestion, "Modification du Contrat de Support") = vbYes Then
Sheet13.[A7] = DateAdd("yyyy", 1, [A7])
MsgBox "Contrat étendu d'une année."
Dim x As Integer
x = Sheet1.[R11].Value
Sheet1.[R11].Value = x + 1
End If
End Sub
You can get the excel workbook at the following link : [URL] ....
This follows on from my previous posting [URL] ..... which produced a solution using an ActiveX Combobox that unfortunately does not work on Mac PCs!
I tried to replace the ActiveX with a Form Control Combobox but could not make it work.
So I am trying to use the alternative of "find, copy and paste" the relevant information.
As shown on the attached 140207 FINDALL test.xlsm, I need to find all records containing whatever string is entered into the "Search" cell, and copy data form three columns onto the Entry sheet.
The User will then select whichever of the entries they want to use, which will populate the relevant cells.
Problem: The following Code is not recognising any of the data in the Column being searched.
VB: Option Explicit Sub FINDPARTS() Dim ws As Worksheet, i As Integer, k As Integer, z As Integer, CL, myFind, CHOICE As Range, lr As String, lrG As String,
Finding any specified Text like "Cube" down a specified Column in this case "D" when Text has been found Copy the 24 cells directly below and Then Paste to G1.
Purpose: Build a roster from: Sheets(Settings).Range("A21").Value (this value is variable)
Problem: Find that A21 value in Range T2:T100 (each value in the range is unique) Copy that value to Sheets("Roster") E8 and the next 9 values to E14 E20 E26 E32 G2 G14 G20 G26 G32
Reason for posting: I've been trying to do this with vba but sheet formula will probably work, I can always Copy/Paste Special/Values to clear the formula. Keyword searching has resulted in no progress.
I have a spreadsheet that I would like to loop through column "C" and if criteria is met copy and paste A:C on sheet1 to sheet2 over multiple columns alternately. What I mean by alternately is that I would past the first row in column A6 then the second in E6 then the third in A7 and so on until all items are copied. I purposely left a blank column between both columns of information. I've tried sorting/and advance filtering and couldn't get it to work.
Example: loop through column "C" If I have the Letter "A" copy data to column "A" and "E" alternately back an forth until I no longer meet the criteria. I start putting data on the 6th row due to header information in rows 1-5. ... If column "C" is the letter "B" copy to column I,M,Q,U
Lastly I could always have less rows of information than I do columns. SO the last column could be empty. I always sort my data by column "C" so data will be sequential.
I have a report where I would like to have a macro search for a date string in columns N-S and copy the date to Column C, same row. The number of rows will vary from day to day. I would then like to format all of Column C to 'mm/dd/yyyy'.
Attached is a file where the date string is included in Column N on row 2 and Column O on the row 3. The dates for both these lines would need to be copied and pasted to their respective rows in Column C.
I want the same affect as copy a table and pasting into the email. So i guess i need to copy a range and save as html in a string. It seems like it would be simple since its just copy and paste into the email, but i've been unable to find anyting on it.
I would like to call up a find box, then be able to search several worksheets for a string, to copy and paste the related row to a new worksheet.
I've gotten as far as being able to search for a string and get the row pasted, as long as the string is defined in my macro. Is there a way though to be able to call up a find box first though, and search for the input variable? (alternatively, I can only imagine a separate piece of code for each variable, of which there are many, and I am actually trying to save time.
find a string and copy certian string to next cell i have tried something which can copy but unforunately that is copying whole cell not certian string.
I have data of 500 rows and i have data till A,B,C,D and E.Please ignore all the other rows which are of no use except E in Column E i just need Reference : A0000000:1 to be copied to next column beside to it that means in Column F.
I would simply like a Macro to 'find' or search keyword data in a spreadsheet and copy the chosen rows and past them into a new excel sheet. I want to be able to do that as many time as I need, currently I have the following code, it does not seem to work well for me, I can only use it to search one time, cause an error after that
Sub FindIt() Dim rngWB As Range, c As Range Dim strFind As String, firstAddress As String Dim wsCount As Integer, ws As Integer Dim rw As Long strFind = Application.InputBox("Type in the name you wish to find.", "FindIt", Type:=2) Application. ScreenUpdating = False Worksheets.Add(After:=Worksheets(Worksheets.Count)).Name = "Blank" Sheets(1).Select...................................
The following is a sample spread sheet similar to ones I use daily.
I am trying to create a macro that will help me do the following.
Look for the same account # shown in Column A to Column F. If the account # matches, copy the total Value in Column H to the correct account in Column C.
The problem here is that In column A, i've placed some headings so i'm not too sure if that'll cause a problem.
I would like to modify the macro below in order to find cells that do not contain */*/20*
How do I achieve this?
Code: Sub delete_oldads() Dim cel As Range, cfind As Range ActiveSheet.UsedRange.Select For Each cel In ActiveSheet.UsedRange If cel = "" Then GoTo nextcel Set cfind = cel.Find(what:="*/*/20*", lookat:=xlPart) If Not cfind Is Nothing Then cfind.Copy Cells(cfind.Row, "A") cfind.Clear End If nextcel: Next cel End Sub
I have a value in sheet3 cell "C9". (the value is stewart)
I am tring to have the macro go down column "C" in sheet1 and the value is the same as "C9"s value in sheet3 then copy the 7 cells to the right and paste them in the 7 cells right of "C9" in sheet3.
Example: If the value in cell "C9" in sheet3 = "stewart" and the value in "C109" in sheet1 is "stewart" the copy C110:C116 in sheet1 and paste those values in C10:C16 in sheet3.
I guess you wouldn't have to offset, you could copy C109:C116 and paste it to C9:C16 since its the same value.
I have two spreadsheets, A & B. In spreadsheet A, user will input a contract number and values for the contract. The user inputs the contract number in cell D4. I have linked this cell to cell B1 of spreadsheet B.
I want Excel to
-copy values from spreadsheet A
-then go to spreadsheet B and find the value of B1(which is the contract number entered in cell D4 of spreadsheet A)
- arrow over 14 columns
- then paste
here's the code i have so far. No matter what contract I input in cell D4 of spreadsheet A (when i step through the code) excel always takes me to cell C10 of spreadsheet B!?!?!
note: the code is in a module in spreadsheet A
Sub find_contract() ' ' find_contract Macro ' Macro recorded 03/15/2007 by b944553
Im trying to get some VBA to search in my worksheet to find a match to the value of cell B5 (the value of B5 changes depending on user choice), then once a match is found I want to highlight from the matched cell to the right 5 columns and down to row 193 (so in total 6 columns would be highlighted down to row 193), then copy and paste special values over those cells.
I need a Macro that will search the range A6:A19 for a match to A3. Once a match is found I want contents of B3:F3 pasted in the corresponding row that the match was found in. In this example contents of B3:F3 would be pasted in B13:F13
I basically need to copy/move the text in column E, from vertical to horizontal using VBA when column C is the same. Then delete the extra lines. eg. C1:C3 = 1, so all the text from E1:E3 needs to goto E1:G1, then Rows 2&3 can be deleted as they are no longer needed. (Note: there are not always 3 instances, this can vary from 3-10). Its a bit hard to explain so i have included the Sample-finished.xls file as this is how it needs to look once its complete.
The macro finds the value in cell D11 (which is the name of a product) in a worksheet called "Summary1". It then looks for this value in another worksheet called "Output", specifically in a column with a named range called "Products". If the value being searched is found in the "Products" named range column (in the worksheet "Output"), the code below copies the entire row for it, to another sheet called "OutputSummary1". I would like to change the code as follows:
1) Instead of copying the entire row, for which the searched for value is found, from the sheet "Output" to the sheet "SummaryOutput1", I would like to instead only copy the values in columns A, B, and E to the sheet "OutputSummary1". Also, I would like the values to be pasted pastespecial so that the formulas in the sheet "Output" are not copied over, and only the values are copied.
2) Secondly, I would like to know how to perform the find procedure (searching for cell D11 contents) on all sheets in the same workbook beginning with the word "Summary" (There will be worksheets called Summary1, Summary2, Summary3, etc. that the macro should be performed on.) As well, the pasting should be perfomed on all respective sheets called OutputSummary1, OutputSummary2, OutputSummary3, etc.
Sub CopyPaste() With Worksheets(1).Range("Products") Set c = .Find(Worksheets("Summary1").Range("D11").Value, LookIn:=xlValues) 'this identifies the value D11 in worksheet called Summary1 If Not c Is Nothing Then firstAddress = c.Address Do c.EntireRow.Copy Destination:=Worksheets("OutputSummary1").Range("a" & Worksheets("OutputSummary1").Range("a65536").End(xlUp).Row + 1) Set c = .FindNext(c) Loop While Not c Is Nothing And c.Address <> firstAddress End If End With End Sub
I now understand that there's a way to remove the activate statements, while still selecting that document to work with, and therefore greatly increasing the speed.
I am trying to find out if it is possible to create a macro in an excel workbook that will open another workbook saved on the computer, perform a find, copy specific data, and paste it in the opened/active workbook.
I am needing to find a specific row of data in one workbook and, once found, copy and paste the values into another workbook. The worksheets in both workbooks are formatted exactly the same. Only the first eight fields of the row need to be copied (e.g. A7:H7, A150:H150, etc.)
Will a combination of VLOOKUP and ROW do this and how do I get them to work together? Once the correct row is found, how are the fields selected, copied and pasted into the specific worksheet of the other workbook?
Thank you all so much for this wonderful forum. Today has been a day of going through post after post. I am usually able to solve my problems through reading similar issues. However, just can quite get this one and I think it is rather simple, but frustrating none the less.
Attached is a spreadsheet with a list names in column B. The codes I have tried to write or have copied find one name and paste it to sheet 1. However, I need to find several names and then copy each row to sheet 1.
I need to firstly find data in the main sheet which relates to the activecell and then I want to copy and paste that data into another worksheet.
The simplest of ways I guess would be the .xldown function however this seems to copy the blank cells as well as the cells with data, which is no good. I have therefore written code as below which finds the first cell with data, copies and pastes, then loops.
How do I set the loop to look at the next cell down from the initial copied cell and if there is data in it to paste it into the cell underneath the one I have just pasted into?
Find a specific text in my column B (example : "Proposal ID"), when "Proposal ID" is found, select this cell and offset to the column C (Offset(0, 1)). Then copy this cell value in another sheet.
This will be repeated with different texts (always in the column B), so if the text is not found, I need the macro to continue running.
I want to find data from a certain point and paste this to a cell. My objective is to get all the data on too one row. This row is always 1 in col M called Run#. The find locations never change, just the data being copied always changes . Heres example,
In col K find FHBASC and look across to the right 3 cells in col N and copy. Look in col M and find 1, paste above copied data into col GI.
Then move down rows to next FHBASC and repeat process until end of sheet.
If I can get a very basic simple macro to do this, then hopefully I can just re write to suit my other data.
