I am creating many tables in excel using a macro, and I want to copy them into a word document for later use. All the tables come from a long list, so for simplicity, they all get created on the same range starting at F1. Before deleting the existing table and adding the new one, I'm trying to copy/cut the table and paste it into a word document.
In case it makes a difference, I have office 2007
VB: Sub ExcelToWord(LastRow) Dim objWord As Word.Application Range("F1:F" & LastRow).Copy With objWord .Documents.Add .Selection.Paste .Visible = True End With End Sub
I have a sheet with 500 rows and 20 columns. I want to put an input box and a button on a different sheet. What I would like to happen is that when you put the criteria in the input box and click the button it opens the form for the row corresponding to the criteria and allows you to edit the 20 columns. Excel 2007.
I am currently using MS Office Excel 2007 and my limited VBA knowledge has put me at a stop of a project that I have been working on. I am trying to create an excel template that will open every word document in a specific folder and pull data located in the title of the document.
For example, I want the spreadsheet to open every document and pull info from the title that would look similar to this:
"line of business";"policy #";"dollar amount";"name";"line of business" and etc.
The semicolons in the title would partition the data across a few cells.
Below is the coding that I currently have, This is my timestamp. Column A adds a timestamp whenever data is entered into the corresponding cell in Column B. Because of this, I need data to be pulled from Word documents and inserted into Column B.
Private Sub Worksheet_Change(ByVal Target As Range) Dim Rng As Range For Each Rng In Target If Not Rng.Value = vbNullString Then Select Case Rng.Column
Below is some coding, but not very specified to my specific needs.
Sub SplitValue(Rng As Range) Dim avarSplit As Variant avarSplit = Split(Rng.Value, ";") Range(Rng, Rng.Offset(, 4)).Value = avarSplit If Left(Rng.Value, 2) = "RE" Or Left(Rng.Value, 2) = "FW" Then
Also not sure if the word document is to be pulling information from the title, if I would need to negate ".doc" from data being imported.
One of my engaging tasks at work is to disable/enable general ledger accounts (accounting speak) in our Oracle ERP application using one of their forms.
In this case it would be a list of gl accounts and to the left of the gl account would be a check box that I can click.
Checked means enabled. Blank would mean disabled.
If I have a list of currently enabled gl accounts that are to be disabled (unchecked) then I have to do so one by one. I can click with the mouse on the checkbox or I can using the keyboard use the space bar followed by the down arrow key and repeat. As fun as that sounds sometimes I'm faced with dozens or hundreds at a time.
Therefore my question is can I automate this using VBA? or any other tools out there.
Using Excel Office 2007, Oracle ERP (9.5.8) I think - it's old
I want to convert Hex to Binary. I want the Binary in 8 different cells.The hex input would be lets say A1 I would want to convert that to eight different cells Bit7 G10, Bit6 G12, Bit5 G14, Bit4 G16, Bit3 E10, Bit2 E12, Bit1 E14 and Bit0 E16.
Then I want another Hex input on A2 and convert that to eight diferent cells.
Currently I am working on a system uploading data from word(with what i think has a script) into a database one by one.(template of somesort) the data is stored into the database in word format.
can i place all the data in rows then get excel to transfer cell content into word and wait for it to upload then clear the contents(word) then do the next row(excel) until it did every cell that's filled? do i need any other applications for this one or can excel alone do it? i'd also like to add a new tab to excel for the command on when excel will do this.
I have a 2007 Excel spreadsheet (saved as .XLS) with worker names in column A and error types in column B. Column B can have multiple entries (which are sometimes duplicative of each other) separated by a hard return.
What I need to do is run tallies to determine the number of errors by type for each person, counting the value every time it appears, even if it is more than once in a particular cell. The ultimate goal is to generate a formula to track the number of occurrences for all error types types for the person in Column A (i.e. one formula each to track ABC's Procedural errors, ABC's Technical errors, ABC's Admin errors, DEF's Procedural, etc) though ideally I just need a formula to calculate any one of those and I can edit it to get the rest. Here's a sample screenshot:
The COUNTIFS formula is where I started but that only seems to count cells with the value as opposed to occurrences of the value. I did find this formula in my searches but it doesn't seem to work:
We just upgraded to Excel 2007 from Excel 2000 and have run into a challenge relating to labeling a form command button. It appears that the length of text for a command button label has been shortened to 31 characters when setting the name using VBA. No such limitation shows up when I manually create such a button.
Following is the code that used to work to create the button and label in VBA (Excel 2000):
I need to generate a microsoft word document from the data encoded in my excel spreadsheet. I am currently using MS office 2007.
in the Excel Spreadsheet from columns C to F "a) b) c) d)" was not typed but in the word document it automatically appears before the choices encoded in excel. Another thing is that some of the choices typed in the excel spreadsheet are in bold font and I want it to be generated in word document with the bold font as well.
By the way I am planning to use this technique to create a 100 item multiple choice exam for my students as I find using EXCEL to generate the document a lot easier than creating the test manually in WORD.
I am working on word documents that has financial numbers on them. I am copying word pages to excel to calculate the numbers by using formulas and etc. I will cut to the chase; is there a way or a macro to insert into an excel template workbook(.xltx) when we open the template there will be a command button to select the word document (which we want to copy its pages) to excel sheets. When a new page begins a new sheet will be created and the page will be pasted on the new sheet.
It is not important if it has to have a command button to select the word document it is ok to run the macro and select the word document and it does not has to populate sheets according to length of word document (I can create lost of free sheets on the template)
The main idea is to gain the time I spend on copying the word document to excel sheets. Some documents can be very long (100 pages). I am using MS Office 2007.
I triend to export data but excel does not allow me to select word documents.
I'm trying to create a very simple order form. It's been a while since I've done this in Excel, and I couldn't find an answer when I searched. (I may be a lousy searcher, though.)
I want the user to enter a quantity in Column E of the "Common Items" worksheet, and have all the rows with quantities copied to the "Order" worksheet. (On the "Order" copy below, I just did a copy/paste to show the desired effect.)
I'm Using Excel 2007 and would like to have some VBA to work with the following!
I have a simple pivot table (PivotTable1) in Sheet1 with three items in the Report Filter which has been named "ROUTE" I have created a ComboBox in Sheet2 and have added the identical three items in via format control, cell link A1.
I would like to be able to use the combobox in sheet2 to operate the PivotTable Report Filter in Sheet1 as I would like to build a report whereas a user. Can only select the comboBox and does not see the pivotTable
Sounds simple but cannot get this to work no matter what I try.
I have a column in my data set that consists of dates and times in this format: 2014/08/02 01:46:49 PM. I am trying to convert these dates and times to numbers so that I can actually use these values for calculations and regression analysis. When I click on one of the cells, I get a number that is revealed along with decimals. For example, the cell with 2014/08/02 01:46:49 PM had a stored value of 41853.574. I tried to highlight the entire column of dates + times and click on the format cells button. I selected the number category under number but that did not work. I also tried to use the =DateValue(Cell #) function but that did not allow for distinguishing between the same date but different times.
What are my options for converting these dates and times to numbers that I can work with? Is there a way to get the entire column of dates + times to show each cell's numeric stored value?
Problem: The macro will be assigned to a command button and will be used by laypersons when they finish filling in data on a worksheet in Workbook 1. The sheet contains maybe 30 columns and 50 rows with a mix of fixed values and values generated by Vlookup and Indirect formulas. I need to copy the sheet from Workbook 1 to Workbook 2. Workbook 2 will be for archival purposes so I want to convert all formulas to fixed values. The catch is dealing with some cells that contain hyperlinks to PDF files...
Current Solution: I currently do this with a macro that moves/copies the sheet from Workbook 1 to Workbook 2, it then selects all cells in the new sheet in Workbook 2, copies all cells, then pastes-special "as values" to the exact same cell locations. This works great for me since the cell formatting and data in the sheet are VERY irregular and I have merged cells all over the place. This method keeps the exact formatting I need maintain:
The problem is that a few of the cells have hyperlinks with "friendly names" and I lose the hyperlinks when I convert to values. The hyperlinks are not inserted directly, they are created by a formula, =HYPERLINK("N:Filepath"&C16&".PDF", "Click_For_PDF"), and the row and column that contains the hyper link will vary for each sheet I want to migrate from Workbook 1 to Workbook 2 using this macro. I want to keep the hyperlink active with the clickable friendly name in Workbook 2.
Possible Solution: I'm open to all types of solutions, but is there a way to essentially use my existing macro but AFTER converting to values with paste-special, go back to the original sheet in Workbook 1 that still contains formulas (or maybe a temporary duplicate sheet I migrate to Workbook 2?), search for all cells with a "value" of "Click_For_PDF", copy ONLY those cells and paste (normal) into the corresponding cell locations in the sheet in Workbook 2 that now contains fixed values? ALL of my hyperlinks have the friendly name "Click_For_PDF" so it should be an easy way to identify the hyperlink cells. The cell location of the hyperlink copied in Workbook 1 needs to carry over to Workbook 2 and I said before, the row and col vary with every sheet I want to archive with this macro.
I am in strange situation where I have a data with Invoice Dates. These dates are in Text. However, when I convert it into reall excel dates. For some reason the dates do not come right. convert my text dates into excel real dates. I did a lot of google search and apply these three methods but all of these gave me strange result I was not expecting. These are the methods I used and the result of each method.
Method 1 : Using Text to Column Wizard (Excel 2007)
I highlighted invoice column and went into text to column wizard. I clikced on Date button, and selected MDY format. Strangely enough, my result was day, month and year i.e. DMY which does not seem right.
Then I press Control ~ on this data as shown in second view.
2nd Method - Using formula to convert text date to real dates When I used formula, I get the following result. As you can see, formula is converting text dates into different system dates than the first method.Further strange things is when I take these system dates i.e. 4283 and in 2007 excel format use "Short Date" the same system date gets converted into wrong year as shown in the second view.
I have encountered some difficulty in modifying a macro I wrote into what I need. I created a macro that searches a column (Column C) for a cell value of, "stop", and then it copies everything above that cell and pastes it onto another sheet. In the sample data set that I was using, "stop" first occurred in cell C541, so the macro copies C1:C540 and pastes it onto another sheet. The problem is that the macro created an absolute reference to C540. What I desire is for the macro to use the 'Find' function to locate the first occurrence of, "stop", offset one cell above that cell, and then reference the active cell (which was positioned by these last two steps) in the range that should be copied. Basically, I'm hoping to have cells C1 through the active cell copied and then pasted onto another sheet.
(they all have words in them). How can I return all cells (an array?) that contain a specific word?
That function is almost perfect, except that returns a number - I need this to return an array of all of those cells that contain the word. Because I have another function to run after that takes in cells and THEN counts how many are a certain color (this one already works) - so it obviously cannot take in a number, it needs a list of cells