(Excel 2007). I have a report that I download which looks like this: The actual report has about 10000+ lines
I don't really want a macro for it but a formula that would copy the name in column A down in Column C but only to the point where the next name starts. So for example James Brown would be copied down in Column C till it reach Account Number 81914 and so on?
A B C
NameAccountJames Brown16836546259386014759716624957862380714557311623681914Steve Smith825168050422745213781459686708210378813700484308138459Holly Wood152663787051472924045442366165332455059500133525111211
I am creating a form using Excel 2007/XP, and am trying to make it easy to use for both people who want to click and people who want to type. I have a series of list boxes in the form that make it easy for the clickers, but I want the typers to be able to tab into the box and make a selection. For example, if the choices are Apples, Pears, and Grapes, I would like a user to be able to tab into the box, hit P and tab to the next box and have Pear be selected.
I have set up a table and for ease of explanantion Column C has a formulas in it to add together the values found in Column A and B.
EG C3 foumula = "=sum(A3+B3)"
Now in cols d & e I have manually entered figures and in colum F I want to add up those figures so F3 should read "=sum(D3+E3)"
In the past I have always been able to just copy the cell C3 and paste it into F3 and the formula would automatically copy and offset the various cells to the correct cells for the new posiitoning.
However, for some reason when I copy the cell, it now pastes the value only into the pasted cell and does not copy the formula, if I click on paste special to try to just copy the formula I now get a pop up asking me if I want to paste as Unicode Text or Text.
Pretty straightforward: randomly and infrequently, Excel ignores my selection of the rear tray paper source on my MX870 Canon. Able to correct issue only by closing out and re-opening Excel.
I have a spreadsheet in version Excel 2007 that is refreshing data from Access tables. Users are needing charts to show progress by month, but are also needing to filter by area and one to filter by a section.
What I have so far is the data being calculated using SUMIFS so that I can pull between dates. I then added two comboboxes so that the user could filter by an area and by section. This is working, except that I have not been able to figure out how to allow the user to select "All" so that they can see all data from on or both of the selections.
I am creating many tables in excel using a macro, and I want to copy them into a word document for later use. All the tables come from a long list, so for simplicity, they all get created on the same range starting at F1. Before deleting the existing table and adding the new one, I'm trying to copy/cut the table and paste it into a word document.
In case it makes a difference, I have office 2007
VB: Sub ExcelToWord(LastRow) Dim objWord As Word.Application Range("F1:F" & LastRow).Copy With objWord .Documents.Add .Selection.Paste .Visible = True End With End Sub
I am trying to copy two columns to a different sheet in vba code. I will ultimately need to do this multiple times but I think I have the iteration part ok, it's just the copy part that seems to be wrong.
The original code I used for this works great on one column but I knew the letter column each time I used it. Now I am trying to get two columns at a time and will be iterating through several based on user selections. I figure that will be faster to do both columns as the two columns are side by side.
I am getting an error on the PasteSpectial line "Run-time error '1004' PasteSpecail method of Range class failed.
I'm not sure where to go with this but I am assuming I have a problem with the Range selection lines on either the source or destination or both. The support is just for Macro errors.
I am trying to limit the user from selecting only what has been selected from the first selector. The selection are based on a drop down (data Validation list)
Excel 2007BCDEFGHIJ1LOOKUP Table2Should only allow from 3only what availble from First SelectorBus/Cntry Level 2Bus/Cntry Level 14ALLALL5First SelectorSecond SelectorAPACALL6TerritoryAPACAPACAPAC Regional Office7APACAsia Licensees8APACAustralia9APACChina10APACHong
My knowledge of Excel 2007 is minimal, from formatting individual cells, to creating column totals. I've used it for years in my household budgets. I have an attendance form which is about 3 pages long; currently, it's separated at page breaks, with column totals at the bottom of each 'page'. This is easy because the Row #s are infinite, right? Lately there have been regular adjustments, and I believe the project might be less cumbersome if it were spread out on separate sheets, but how to bring the rows of column totals to cumulative totals on the last sheet.
I just wrote two macros that each produce separate text files (call them 'A' and 'B'). I want to open 'B' with Excel VBA, copy all of its contents, and paste that content into 'A' right after a specific location in 'A' (where I have 10 consecutive asterisks, i.e., **********).
Most topics relating to Excel VBA and .txt files have to do with either importing / exporting into Excel (not what I want), or with associating .txt files to Excel (also not what I want).
[URL]....When I select a name in column B, it populates column C's dropdown with that name's list of units. When I select a unity type in column C, I'd like it to automatically populate column E in the same row with the value associated with that unit. The values associated with a particular unit can be found to the right of the sheet. So if in row 2 I select Blake in column B, then Unit 5 in column C, I'd like column E to be populated with 14.
Edit: using Excel 2007.
I attached stripped down version of the sheet which is small enough to post. None of the things I removed should affect the topic at hand. The full sheet is available at rapidshare.
What I am looking to do is this... (using Excel 2007)
I need to have more dependent lists based on the selection in Column A. (My column B is already set up and works perfectly using INDIRECT)
For example: Column F would be a dependent list of colors based on the sales rep chosen in Column A Column I would be a dependent list of managers based on the sales rep chosen in Column A Column M would be a dependent list of part numbers based on the rep chosen in column A
without using VBA? (If I HAD to - okay, the other person maintaining the sheet would be lost....) I haven't been able to find anything close to what I want to do online - maybe I am just not using the correct terms.
I have some data coming in from another source system which has the date format as "DD-MM-YYYY" but while pasting it to Excel (2007) sheet some date fields has just DD-MM-YY format which disrupts my macro. I did changing the language settings to "English(UK)" ,which i wanted, and changed the same in Excel options as well. But unfortunately it doesn't work.
I'm a 2007 user. I am trying to conditional format a range of F1:J10, where F1 will be conditionally formatted relationally to A1. G1 is relational to B1. H2 relational to C2, etc., all the way down to J10 relational to E10. My conditional format formula in cell F1 is >A1*2 (will format F1 as orange). I want to be able to copy the conditional formatting over so the formula in J10 for example would be: >E10*2 (will format it orange).
I omit the "$" in the conditional format formula in an attempt to prevent it from being absolute. But every time I copy the conditional formatting over to the other cells, the formula within those cells remains identical to the formula in the original cell.
I am trying to develop a code which extracts the data from text files inside a folder (Folder test in my desktop) into one sheet. The Macro is in the workbook “Text Extract” which is an excel 2007 file. The data of each text should be copied to Sheet1 of this workbook one below the other. For testing purpose I have kept only one text file in the folder and was trying to copy the data from the text data extracted sheet to Cell A1 of Sheet1 of workbook “Text Extract”. The code works fine till copying the data, but shows below error in the line “Selection.Paste”:
Run time error 438: Object doesn’t support this property or method.
Below is the code: Sub LoopThroughFiles() Dim strFile As String Dim strPath As String
I have conditional formatting set up so that the cell becomes highlighted if it contains a specific text.
Example of wanted conditional formatting:
Conditional formatting rules manager Rule
Format
Applies to
Stop if true
[Code] ......
For some reason this formatting is inherited by another adjacent cell as we continue to input information.
For example:
Column M is formatted so if 'AP' is placed in any cell in that column the cell fills pink. As more information is inputted into the sheet, the conditional formatting copies to Column N. It does not happen with every entry and I have not been able to isolate the specific steps to recreate the copying. Multiple people use the same sheet and fill it out and needed.
After working with the sheet changes are made to the "applies to" column without people meaning to.
For example:
Conditional formatting rules manager Rule
Format
Applies to
[Code] .......
I would like to make this formatting so that is only applies to the Column M and not "travel" to other cells of the sheet.
I have 2 excel files, let's call them 1.xlsx and 2.xlsx (excel 2007)
File 1 is the file where I want data copied into and file 2 is the file I want to copy data from.
File 1 has certain text strings in every say 5th column in always row 2. I want to find those strings in file 2 and if the string is found, go 6 rows down, copy the cell, and paste it into file 1, 8 rows down the text string. this is the code I came up with, but it doesn't work
Code: Option Explicit Sub get_data_from_2()
Dim i As Long Dim j As Long Dim FinalColumn As Long Dim RngFrom As Range
I am using MS Excel 2007 and I am trying to create a macro which will copy column E and paste the data in column E to the bottom of column D. However each week the amount of rows in these column with vary, they will always be the same amount of rows in column E as in column D but there may be 20 rows one week and a 100 rows the next.
The formula I currently have is below but this will only work for a specified number of rows. How I could change this to work for any number of rows?
Code: Sub IPT() ' ' IPT Macro ' ' Range("E1").Select
I am working on word documents that has financial numbers on them. I am copying word pages to excel to calculate the numbers by using formulas and etc. I will cut to the chase; is there a way or a macro to insert into an excel template workbook(.xltx) when we open the template there will be a command button to select the word document (which we want to copy its pages) to excel sheets. When a new page begins a new sheet will be created and the page will be pasted on the new sheet.
It is not important if it has to have a command button to select the word document it is ok to run the macro and select the word document and it does not has to populate sheets according to length of word document (I can create lost of free sheets on the template)
The main idea is to gain the time I spend on copying the word document to excel sheets. Some documents can be very long (100 pages). I am using MS Office 2007.
I triend to export data but excel does not allow me to select word documents.
I have a simple reporting sheet where the data for orders place is in one sheet and on the other sheet is an imput box for 'date' and it filters through and presents a table of data and two graphs for the date chosen.
I give a daily report (contents of this sheet) but I also need to leave this sheet available for anyone to open and change to another date.
I want to copy the repor sheet into a new one and email but I want the graphs to remain, not go blank when anyone changes the original sheet.
I have a worksheet with some arbitrary selection - it may be 1 cell, a 5 by 4 rectangle, or even a noncontiguous splattering here and there on Sheet1. I want to select the identical cells on another sheet. So I'm thinking something like
dim sht1 as worksheet, sht2 as worksheet 'set them appropriately, then... sht1.selection = sht2.selection
I am using a form which has 3 text boxes and a list box. How do I copy the selection of a list box to the text box based on my active text box. So, if I was in text box1, and I click a selection in listbox1, it copies that selection to textbox 1, etc.
I would like to copy selected rows in a range D19:I49 to another sheet, by clicking a button to bring up a User Form containing a List Box, seven Option Buttons (one for each sheet), an OK and Cancel Button. When the User Form is displayed, the required rows are selected in the List Box, then the required sheet is selected via an Option Button. Upon clicking the OK button it pastes (only the values) to the selected sheet, but to the next empty row (if there is already data entered previously) in the same range as above (D19:I49). All seven sheets are identical and are named Monday, Tuesday, etc. to Sunday. If the option button selected is the same as the active sheet a message box could be displayed to ask the user to select another option button and upon clicking the OK button on the message box return the user to the User Form once again so that the correct option button may be selected.
I am working on Excel document(Microsoft office-2007) with 2 sheets(Sheet1,Sheet2). In sheet1 i have a dropdown list and the respective data is saved in Sheet2.On selection of dropdown lists in sheet1 ,respective rows should get copied from Sheet2 to Sheet1.
I am having trouble with the macro command. This is a first for me and I am stuck. I just dont know the how to write the Macro for this.
I have the following code and I can't work out how to fix it. What i want is for the macro to create the pivot table from the "used range" in a worksheet but I want it to be formatted as a 2007 pivot table. The reason I say this I because I have some 2003 code which works very well which is where the idea of this come from but it doesn't seem to work here. I have highlighted the problem in orange, I know the rest of the code works because when I replace the orange bit with
"Raw Data!R28868:C33" it works.
Sub CreatPivot() Dim wksdata As Worksheet Dim rngdata As Range Dim wksdest As Worksheet Dim pvtTable As PivotTable Set wksdata = ThisWorkbook.Worksheets("Raw Data") Set rngdata = wksdata.UsedRange.........................
The macro is: collecting data from another opened workbook,processing the data,saving the processed data in yet another workbook.
The workbooks' names it is operating on are hardcoded in the macro. I'm trying to make it more flexible, that is to allow user to specify both source and target workbooks along with the data columns.
The workflow follows:
User opens both source and target workbooks,User opens the workbook with the macro,User runs the macro (with a button for example),Macro prompts the user to select range in the source workbook,Macro "memorizes" the range and the source workbook's name from user's selection,Macro prompts the user to select range in the target workbook,Macro "memorizes" the range and the target workbook's name from user's selection,Macro processes the data.
I found out that this can be achieved with Application.InputBox("Select cell(s)", Type:=8) method. However there are some issues that I was not able to solve playing with the returned value's methods:
The .InputBox defaults to active workbook. I was able to select another opened workbook only with Ctrl+Tab combination, but it will not work with the end users - they are too poor with these tricks. Is there a better, more intuitive way to allow user selecting a workbook?I was not able to get the workbook's name from the .InputBox returned value property. I was trying with .application.caption and .application.activeworkbook.name - none of these worked. They returned name of the workbook with macro, not the one with selected range. How to get the workbook's name from given cells range?
