I have a file with 2 columns (A=headers, B=values x 38K rows) and need to transpose them to rows.
I found code to transpose a specified number of rows in a column (i.e. every 5th row in the column)...
BUT my columns have variable numbers of data points, because in the exported file any head with a null value was excluded.
So I need to start new rows with a specific text value of "Username" occurs in column A.
I need to transpose data from Column A to Row 2 and down.
The data in column A is in sections of 19 rows and then a blank cell and another 19 rows of data contimuously, It is a dynamic range and can contain many thousands of Rows.
The data needs to be transposed from Column A to row 2 (row 1 has the head line for each column) so the 19 lines of data is now spread accross 19 columns in row 2 and the next section from column A is spread accross the 19 columns in row 3 and so on.
My data looks similar to the below. (Test Number 0001 starts in A1)
Test Number 0001
21-Feb-2014
Kettel
Office
Demo
[code]....
I use Excel 2007
I am trying to transpose 1 column into 3 columns:
Example:
1
2
3
4
5
6
7
8
9
ect...
into
123
456
789
ect...
Here is the code I have:...................
I have 10 columns and five rows worth of data in each of those cells
What I really want out of that spreadsheet is 50 rows and only one column
I want to transpose or invert the data so I can apply some formulas in an easier manner
Is there a command to do that.....not too familar with that transpose feature
I am looking for a macro that works like the ASAP Utility (Transpose data from one column to several columns in steps). To elaborate the work done by the macro it should transpose the values in a column to the number of steps that is user defined (Using InputBox) that is if there are 103 values in the column and the user enters the number of steps as 24 then the macro should transpose the data up to 24 columns and the rest in the next row up to 24 columns and so on unless the complete data is transposed.
For more clarity refer the attached excel sheet or the "Transpose data from one column to several columns in steps" utility of ASAP Utility.
I'm trying to get a macro together that will take a set of workbooks that I've merged (using Ron de Bruin's RDBMerge add-in) and transpose all columns from B to HB into rows. Now, I know that each spreadsheet is 210 columns and 244 rows large and they are concatenated on one another. Attached is a brief example of what I am trying to go from and what I am trying to get to.
View 1 Replies View RelatedI have the following macro which I use to transpose a number of columns in one sheet to rows in another sheet.
PHP
Sub task1()Dim i As Integer, n As LongFor i = 5 To Columns.Count Step 2 n = n + 1 With Sheets("Working_Checklist_1").Cells(10, i).Resize(16) Sheets("Summary_Intermediate").Cells(n + 2, "c").Resize(.Columns.Count, .Rows.Count) _ .FormulaArray = "=if(transpose(Working_Checklist_1!" & .Address & ")=0,"""",transpose(Working_Checklist_1!" & .Address & "))" End WithNextEnd Sub
I'd like to change this macro so to transpose from rows to columns. I've tried a couple of things, but can't quite get it to work.
I'd like to transpose every second cell starting from E7 to IV7 in Working_Checklist into column BU in Summary_Intermediate, starting from BU3.
I have a long (190,000) list of customer data, all in Column A (unfortunately with blank rows among it, but working now to fix that).
Down the column, individual customers are bookended by a "adf" and a "/adf". (these have open and close brackets like HTML code, but I cannot reproduce them in this forum).
For each customer, I need to find the rows that begin with (brackets spelled out since I do not know how to show them):
1. [open bracket] vehicle status
2. name part=3D"first"[close bracket]
3. [open bracket]name part=3D"last"[close bracket]
4. [open bracket]email[close bracket]
5.[open bracket]phone time=3D
6.[open bracket] name part=3D
And transpose only those rows it into columns.There is a dynamic number of rows for each customer, so there's no way to simply count and transpose, as the columns would all be mis-entered.Somehow it needs to recognize those 6 row items, and transpose those values only, with the and the only telltale of a start and finish of a specific customer.
EDIT: How about a macro to delete all rows except those that contain those partial values above?
i have the following spreadsheet with dummy data however, there is a before and after scenario i have posted is this possible with a macro ...
View 9 Replies View RelatedI am receiving the results of a Web-based test via e-mail. I am able to paste the e-mail's contents into an Excel spreadsheet and use it to manipulate the data as necessary, with one exception, namely an answer that requires the test taker to write a multi-paragraph e-mail response. I am able to identify which cells in Column A this answer occupies, for sake of argument, A60 to A70.
I want to have the contents of these cells appear in a single cell, B60, with linefeeds.
I'm able to do this with the following macro:
Code:
Sub paste()
Range("indirect(i5)").Value = vbCR & Join(Application.Transpose(Range("indirect(e1):indirect(e2)")), vbCR)
End Sub
where the indirect functions refer to cells where I've identified the beginning and ending rows of the range of cells I want to combine. I've also concatenated an additional vbCR to insert a leading carriage return, desirable for cosmetic reasons.
With an interactive button on the spreadsheet to activate the macro with a single click, it's pretty nifty.
Now, I have run into a problem when indirect(e1) and indirect(e2) have the same value. In that case, the macro fails. How do I recode or work around this?
Full Document (2)
A
2
24 IP LAW GROUP FRANCE
3
48 rue Saint Honor
4
75001 PARIS
[code]....
I have many data in above format. I need to put it in columns. Also there is NO uniformity in rows. The data consists of Company name, Address, Tel no. Fax no., email and contact names and in some cases website also.
So when the data is transposed into columns, due to non uniformity the data gets jumbled. PColumn headings as Company name, Address, Tel no. Fax no., email, website and contact name.
I have two columns of data as follows:
10:57:42 273
10:57:42 263
10:57:42 253
10:57:42 241
10:57:37 273
10:57:37 243
10:57:37 249
10:57:37 261
10:57:37 253
11:04:47 241
11:04:47 253
11:04:47 263
10:54:31 254
10:54:31 240
10:54:31 265.......
I would like to take the data from worksheet1 and put into worksheet2 but limit the length of a list (the real spread sheet has over 100 rows and i would like them in 4 sets of 25 versus the example I provided). Is there an array or macro that would make this work (keeping the formatting)..
Excel 2007
B
C
3
Name
Company
[Code].....
I have a list in Excel, and it has the company in one column, and it's information in the next x rows until there is a blank row (4-7 rows). I get that you can copy the rows under the Company, transpose next to the company, and then delete the contents of the cells that you just took the data from, but I have 6200 rows do to this to, for 500+ companies. I tried recording a macro for two entries, and this is what I have (see below), but how do I modify this so that I don't need to type in every single range, and it will do it to the whole column? The data is in column A, I am posting in column B.
Basics for Macro Requirement:
1. Find the blank cell in row A
2. Skip the next cell/row (this is the company)
3. Select all the cells beneath the company cell, until it reaches the blank cell underneath
4. Copy, transpose these cells next to the Company cell (transpose in column B)
5. Delete the contents in row A that were just transposed
6. Find the next cell with data (company)
7. Repeat Steps 2-6
My recorded Macro:
Sub Macro2()
'
' Macro2 Macro
'
' Keyboard Shortcut: Ctrl+q
'
Range("A3:A8").Select
[code]....
Excel 2007 - Sorting across columns
Need to sort part of an Excel worksheet across multiple columns.
For example data is:
ABCDEF1
Machine
4394264394294394434399834399842
Model
TD860TD400TD860TD620TD6203
Pgm
OPTABCOPTEP2EP24
Start
5/31/119/1/115/1/096/15/092/1/085
End
2/28/158/31/125/31/114/30/108/31/09
I need to sort it first by Pgm, within Pgm by Model, and within Model by Machine. I do not need to sort on Start or End
The results should look like:
ABCDEF1
Machine
4394294399834399844394264394432
Model
TD400TD620TD700TD860TD8603
Pgm
ABCEP2EP2OPTOPT4
Start
9/1/116/15/092/1/085/31/115/1/095
End
8/31/124/30/108/31/092/28/155/31/11
After selecting the data to be sorted (columns B,C,D,E,F), I tried using "Sort Left to Right" under DATA-SORT-OPTIONS but it doesn't seem to work.
how to add many columns to the rightmost part of the worksheet carrying on from Col AA?
I keep getting error 'Cannot shift objects off sheet.' and followed instructions to change a setting to All or use control-6 but this made no difference.
I have the following situation and I'm trying to do this using a PC with Excel 2007.
I would like this:
T
N
O
O
[Code]....
The total number of columns will be 11, number of rows will vary.
I'm looking to simply find a function that allows me to lookup a certain value in a table of data and return the value in a specific column. So if I looked up the current date, 6/27/2011, it would return the week it is in (26). I dont want to be limited to just the monday column however, as the dates I will be throughout the entire week. Is there an easy way to do this in excel 2007?
MondayTuesdayWednesday ThursdayFridaySaturdayWeek
5/2/20115/3/20115/4/20115/5/20115/6/20115/7/201118
5/9/20115/10/20115/11/20115/12/20115/13/20115/14/201119
5/16/20115/17/20115/18/20115/19/20115/20/20115/21/201120
5/23/20115/24/20115/25/20115/26/20115/27/20115/28/201121
5/30/20115/31/20116/1/20116/2/20116/3/20116/4/201122
6/6/20116/7/20116/8/20116/9/20116/10/20116/11/201123
6/13/20116/14/20116/15/20116/16/20116/17/20116/18/201124
6/20/20116/21/20116/22/20116/23/20116/24/20116/25/201125
6/27/20116/28/20116/29/20116/30/20117/1/20117/2/201126
7/4/20117/5/20117/6/20117/7/20117/8/20117/9/201127
7/11/20117/12/20117/13/20117/14/20117/15/20117/16/201128
7/18/20117/19/20117/20/20117/21/20117/22/20117/23/201129
7/25/20117/26/20117/27/20117/28/20117/29/20117/30/201130
8/1/20118/2/20118/3/20118/4/20118/5/20118/6/201131
8/8/20118/9/20118/10/20118/11/20118/12/20118/13/201132
8/15/20118/16/20118/17/20118/18/20118/19/20118/20/201133
8/22/20118/23/20118/24/20118/25/20118/26/20118/27/201134
8/29/20118/30/20118/31/20119/1/20119/2/20119/3/201135
9/5/20119/6/20119/7/20119/8/20119/9/20119/10/201136
9/12/20119/13/20119/14/20119/15/20119/16/20119/17/201137
I am using Windows xp and Excel 2007. I'm creating a user form and have a vlookup formula that goes to a table and looks up calories and sodium based on the text entered by the user. My problem is that I want to be able to populate the 3 columns with information and then sum the values that are returned to the Calories and Sodium columns. Is that possible with Vlookup?
=IF(ISNA(VLOOKUP(F8&G8&H8,Food!A:E,4,FALSE)),0,VLOOKUP(F8&G8&H8,Food!A:E,4,FALSE))
Water 24 ozOther DrinksGelsSolid FoodCaloriesSodium
00
00
00
I am trying to copy two columns to a different sheet in vba code. I will ultimately need to do this multiple times but I think I have the iteration part ok, it's just the copy part that seems to be wrong.
Code:
Worksheets("Lookup").Select
Range(n & lngRevStart & ":" & n + 1 & lngEndRow).Select
Selection.Copy
Worksheets(strDeptSheet).Select
Range(Columns(o), Rows(m)).Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
The original code I used for this works great on one column but I knew the letter column each time I used it. Now I am trying to get two columns at a time and will be iterating through several based on user selections. I figure that will be faster to do both columns as the two columns are side by side.
I am getting an error on the PasteSpectial line "Run-time error '1004' PasteSpecail method of Range class failed.
I'm not sure where to go with this but I am assuming I have a problem with the Range selection lines on either the source or destination or both. The support is just for Macro errors.
I have two columns
Req | Expiry Date
yes 11/12/2010
yes 08/06/2012
yes 02/07/2017
how do i merge both columns into one.. not losing any data hence
Req Expiry Date
yes 11/12/2010
yes 08/06/2017
I am using excel 2007 ITS FOR WORK!
I have the following situation and I'm trying to do this using a PC with Excel 2007.
I would like this:
T
N
O
O
C
O
E
I
M
I
T
[Code] ........
To look like this:
T
H
A
N
K
[Code] .........
This procedure will become part of a macro. The number of rows will vary but the number of columns will be the same (11 columns). I don't care too much about the order since I can later sort. As long as the data from all columns in now in one column.
macro for an Excel 2007 file. It has to be a macro. I have cells in two columns I need to look at. Column A will have a value of cat, dog, or mouse. Column B will have a date. If A2="mouse" AND B2<"1/1/2013" Then A2="" ElseIf A2=mouse" AND B2>="1/1/2013" Then A2="mouse". I don't need anything to happen if A2 is equal to cat or dog. The macro has to move down the entire A and B column: A3/B3, A4/B4, and so on until the end of the columns. Hope this makes sense. I've tried a few macro samples I found online but they don't quite fit what I need done, or I don't know how to modify it.
View 2 Replies View Relatedis there a way to combine the info from several columns into 1 list?
All of my columns have information in rows 1-20, but I want it all to automatically combine into a list in column B on a new sheet.
This is Excel 2007
I'm using Excel 2007. My pivot table seems to be limiting me to 256 columns in the Values/Data area. In researching below I believe that I should be able to have 16,000 columns in my Pivot Table.
[URL] The "Big Grid" and Increased Limits in Excel 2007
PivotTables Maximum rows displayed in a PivotTable report is 1 million.
Maximum columns displayed in a PivotTable report is 16,000.
Maximum number of unique items within a single Pivot field is 1 million.
Maximum number of fields visible in the Fields list is 16,000.
I am looking for a way of allowing users to edit the existing cells at their will, but simultaneously disabling the option to insert/ delete columns or rows.
By enabling Sheet Protection, I cannot find a way to do it. Can I?
I am on MS Excel 2007 by the way.
I found the way, just unlock all cells in Format Cells, Protection Tab. Then Protect sheet and de-select what you want to disable.
I am currently using MS Excel 2007. Is there a way in VBA to automatically insert missing columns based on a defined series or range of values?
For example, we have a report that displays columns of: Year 2004 to Year 2012 per column (9 columns in total).
Sometimes, it displays missing a year or years (thus; our report has less columns). For example, it only shows 2008 to 2012 (missing 2004 to 2007). At times, it misses some years in between. What we do is manually add those missing years by manually inserting columns then inputting the missing year as their column headers.
Is it posisble for VBA to check if the columns contain all of the defined Year range (for example, you've initially defined: Year 2004 to Year 2012)? Afterwards, all missing columns are automoatically inserted (in chronological order or based on your defined values or range).
I'm currently working on a process to recategorise products for a distribution company to give a category based on successful sales transactions.
Product Code
Category
Month 1
Month 2
[Code].....
This isnt the actual data in case you're wondering I'm doing this with 32k lines.
So, what I want to have is categories based on sales transactions, labelled with letters. So, cat A is sales in three consecutive and top X when total of three month consecutive sales, cat B being above X number of transactions in three months not already categorised by cat A. There is a Cat C, and various others which I can do myself, but i dont know how to make the category A work.
I'm using Excel 2007.
Macro code to find several column names in row 1 (which can be anywhere in the work sheet) and delete them e.g. date, month, code, amount etc.......
Excel version 2007
I use Excel 2007.
I have a data set that tracks ingredients in chemical products. For example sake the chemical product is a mixed color, and the calculated ingredient is a primary color.
I need to calculate the quantity of two primary colors based on their percentage of the mixture.
Column A contains the mixed color names. Columns B and C contain the percentage of the primary in each mix.
I began tracking this data in January 2009. Each month I add 3 columns to the worksheet. The 1st column contains the monthly mixed color quantity used. The 2nd and 3rd columns contain the calculation of the two primary colors.
I need the formula to calculate the 12 month rolling total for each primary color. (For July 2014 I need to calculate July 2013 through June 2014)
A
B
C
E
F
G
H
I
[Code]...