I have two columns
Req | Expiry Date
yes 11/12/2010
yes 08/06/2012
yes 02/07/2017
how do i merge both columns into one.. not losing any data hence
Req Expiry Date
yes 11/12/2010
yes 08/06/2017
I am using excel 2007 ITS FOR WORK!
Currently I am using Excel 2007. I want to merge data of alternate row of a particular column in Excel.Also i want to remove merged row. E.g.
Name City Pincode
John Mumbai
John 400009
Carol Delhi
Carol 110001
Carol Pune
Carol 411079
I want output to be ----->
Name City
John Mumbai-400009
Carol Delhi-110001
Carol Pune-411079
macro/formula for the above requirement..?
I have two columns with team abbreviations, one simply says whether they are AL or NL the other is the result of a search with multiple occurrences of the team name. I need to match the long list with the short and put the column header AL or NL in the adjacent cell.
I'm using Excel 2007
The last formula I tried was =INDEX($AY$1,MATCH(BB2,$AY$2:$AY$15,0),0)
The screen shot actually just part of the sheet copied since the screen shot look like a broken html page Ok I give up. I copy and paste a jpg it turns into code, I copy and paste the spreadsheet and formatting vanishes, I don't have a URL for the picture... I did look at FAQs and didn't find picture rules but I will look again. Meanwhile. . .
It's just six columns of data. The short list is in AY from AY2 : AY15
The long list is in BB from BB2:BB505
The column header "AL" is in AY1 and NL is in AZ1
My data is in column A. I need to have the data as in column E and F. Column E is the field names.Rows can be up to anywhere and may very.
Excel 2007
A
B
C
D
E
F
I am using excel 2007. I have data which, instead of being posted on multiple columns, is all within 1 column. The data most simply has the characteristics of:
AAA
AAA - description
BBB
BBB - description
CCC
CCC - description
and so on..
I would like to move the descriptions from column A to column B:
AAA AAA - description
BBB BBB - description
CCC CCC - description
and so on...
What would be the best way to accomplish this?
Give me the code to attached one column of data to the bottom of another?
ie the next available cell
so column a has 250 lines of data the data from another column will then go diectly into 251
thats not the number i want but the next available
There is one crucial feature to the 2007 Excel that has been overlooked.
Throughout all versions of Excel there has always been the feature of
converting text to table, however there is no way to do this in reverse.
There is no way to merge two columns of data and to keep all of the data
without one column overwriting the other. If only there were an automatic
way to merge two columns of data and to be able to place a delimited
character in-between, just like the “Convert Text to Columns Wizard”, except
in reverse. Currently, the only way to merge two columns of data is to
manually go row-by-row and cut and paste them together. However, for 500,000
rows of data… this is impossible. Or to use a function to merge two columns,
however this requires that the original two columns remain. This is also
unacceptable. If Microsoft really wants to make Excel more functional, how
can this vast improvement be overlooked?
I've been trying unsuccessfully to find a way to merge data into a matrix, but can't quite figure out a way to manage it. I have a list of employees in column A, in the list there are employees, many with multiple instances, and in columns C onwards there are dates in dd/mm/yyyy format.
Each line represents the number of nights in a trip, from 1 to 35 nights and the start to finish dates. Where as some employees may only have one row with one date others may have 20 rows with between 2 to 35 dates.
I'd like to merge this into a matrix with one line for each employee showing which nights in the year they were away (tab matrix) which has a day of the year to illustrate which employees were away on which nights of the year.
I've uploaded an example to highlight what I mean.
I've tried a pivot and an index match formula but couldn't get either to work.
Current Data:
File 1:
Each set of data is listed in either two or three rows
Eg.,
ID
Date
Filename
ID
Date
ID
Date
Filename
The goal is to move them to separate columns (rows can be 3 or 2 for each data set, and may or may not be separated by space/additional row)
File 2:
Has a common field 'ID' as that of File1, does not have Date, and Filename, but has a new field 'Detail' (already in the expected format)
Eg.
ID Detail
The goal is to merge properly formatted data from File 1 to File 2
Eg
ID Date Filename Detail
I have data in excel that has some information the same with a unique field. See below:
Last Name
First Name
ID
Date
Address
Apt #
Acct #
Code 1
[code]...
I want it to consolidate all of the like information but add on the codes in separate columns like this:
Last Name
First Name
ID
Date
Address
Apt #
Acct #
Code 1
Code 2
Code 3
Code 4
[code]...
Also, sometimes the same code is used multiple times but i want any duplicate codes to show as separate codes.
I have a parent spreadsheet with raw data(with errors) and a child spreadsheet without errors. I want to merge the child into parent. (:{). I am thinking of comparing multiple columns from each sheet to ensure maximum accuracy. And when those columns match up we paste the corrected column data from child sheet to parent one. I am using windows 7 and Excel 2010.
View 1 Replies View RelatedI would like to take the data from worksheet1 and put into worksheet2 but limit the length of a list (the real spread sheet has over 100 rows and i would like them in 4 sets of 25 versus the example I provided). Is there an array or macro that would make this work (keeping the formatting)..
Excel 2007
B
C
3
Name
Company
[Code].....
I have two Spreadsheets on Excel 2003, one provided by a service supplier (i), and one from my own system (ii).
I need a macro attached to spreadsheet ii that looks for data matches between the F column of my spreadsheet, and the C column of the suppliers. Where data matches (i.e. if cell C42 in spreadsheet ii is the same as cell F23 in spreadsheet i) it transfers the contents of the A column of spreadhseet i and places it in the corresponding cell in the C column of spreadsheet ii.
Example 1 : In spreadsheet i cell C20=BN213YD. In spreadhseet ii cell F55=BN213YD. Therefore, the macro takes the contents of cell A20 in spreadsheet i and places it in cell C55 of spreadheet ii
Example 2 : In spreadsheet i Cell C75 = TN142XS. In spreadsheet ii this data is not found. The macro therefore takes no further action.
Basically, the suppliers spreadsheet has less information per row, but more entries overall. My spreadsheet is lacking a lot of suppliers references, but has more comprehensive information elsewhere. Until now i have been doing a manual search of the postcodes between the spreadsheets and rectifying them manually, but this is taking longer and longer as the spreadsheets grow.
I know there are many ways to create an "All Data" worksheet. Copy & Paste is the most obvious or pasting named ranges into the new worksheet. I have a workbook with 48 tabs with up to 1000 rows of data per sheet. I need to merge each tab into one main "All Data" worksheet.
How to combine these 48 sheets in an easier way than the two options I already know (Copy/Past or Paste Named Range). Any Add-In's to Excel that can possibly do this? I am using Excel 2010.
How to make this "All Data" worksheet combining data from each sheet of the 48 tabs would be most useful.
We have a master worksheet, and I cant let staff see it, but I want them to update 'their bits' themselves, rather than email the admin staff and let them update the master sheet..
every job is on its own row and contains a unique ID.
is there a way i can merge their data in to the correct row and column(s) on the master sheet?
i've been playing with datasources etc
Excel 2010
Excel 2007 - Sorting across columns
Need to sort part of an Excel worksheet across multiple columns.
For example data is:
ABCDEF1
Machine
4394264394294394434399834399842
Model
TD860TD400TD860TD620TD6203
Pgm
OPTABCOPTEP2EP24
Start
5/31/119/1/115/1/096/15/092/1/085
End
2/28/158/31/125/31/114/30/108/31/09
I need to sort it first by Pgm, within Pgm by Model, and within Model by Machine. I do not need to sort on Start or End
The results should look like:
ABCDEF1
Machine
4394294399834399844394264394432
Model
TD400TD620TD700TD860TD8603
Pgm
ABCEP2EP2OPTOPT4
Start
9/1/116/15/092/1/085/31/115/1/095
End
8/31/124/30/108/31/092/28/155/31/11
After selecting the data to be sorted (columns B,C,D,E,F), I tried using "Sort Left to Right" under DATA-SORT-OPTIONS but it doesn't seem to work.
how to add many columns to the rightmost part of the worksheet carrying on from Col AA?
I keep getting error 'Cannot shift objects off sheet.' and followed instructions to change a setting to All or use control-6 but this made no difference.
I have the following situation and I'm trying to do this using a PC with Excel 2007.
I would like this:
T
N
O
O
[Code]....
The total number of columns will be 11, number of rows will vary.
I'm looking to simply find a function that allows me to lookup a certain value in a table of data and return the value in a specific column. So if I looked up the current date, 6/27/2011, it would return the week it is in (26). I dont want to be limited to just the monday column however, as the dates I will be throughout the entire week. Is there an easy way to do this in excel 2007?
MondayTuesdayWednesday ThursdayFridaySaturdayWeek
5/2/20115/3/20115/4/20115/5/20115/6/20115/7/201118
5/9/20115/10/20115/11/20115/12/20115/13/20115/14/201119
5/16/20115/17/20115/18/20115/19/20115/20/20115/21/201120
5/23/20115/24/20115/25/20115/26/20115/27/20115/28/201121
5/30/20115/31/20116/1/20116/2/20116/3/20116/4/201122
6/6/20116/7/20116/8/20116/9/20116/10/20116/11/201123
6/13/20116/14/20116/15/20116/16/20116/17/20116/18/201124
6/20/20116/21/20116/22/20116/23/20116/24/20116/25/201125
6/27/20116/28/20116/29/20116/30/20117/1/20117/2/201126
7/4/20117/5/20117/6/20117/7/20117/8/20117/9/201127
7/11/20117/12/20117/13/20117/14/20117/15/20117/16/201128
7/18/20117/19/20117/20/20117/21/20117/22/20117/23/201129
7/25/20117/26/20117/27/20117/28/20117/29/20117/30/201130
8/1/20118/2/20118/3/20118/4/20118/5/20118/6/201131
8/8/20118/9/20118/10/20118/11/20118/12/20118/13/201132
8/15/20118/16/20118/17/20118/18/20118/19/20118/20/201133
8/22/20118/23/20118/24/20118/25/20118/26/20118/27/201134
8/29/20118/30/20118/31/20119/1/20119/2/20119/3/201135
9/5/20119/6/20119/7/20119/8/20119/9/20119/10/201136
9/12/20119/13/20119/14/20119/15/20119/16/20119/17/201137
I am using Windows xp and Excel 2007. I'm creating a user form and have a vlookup formula that goes to a table and looks up calories and sodium based on the text entered by the user. My problem is that I want to be able to populate the 3 columns with information and then sum the values that are returned to the Calories and Sodium columns. Is that possible with Vlookup?
=IF(ISNA(VLOOKUP(F8&G8&H8,Food!A:E,4,FALSE)),0,VLOOKUP(F8&G8&H8,Food!A:E,4,FALSE))
Water 24 ozOther DrinksGelsSolid FoodCaloriesSodium
00
00
00
I am trying to copy two columns to a different sheet in vba code. I will ultimately need to do this multiple times but I think I have the iteration part ok, it's just the copy part that seems to be wrong.
Code:
Worksheets("Lookup").Select
Range(n & lngRevStart & ":" & n + 1 & lngEndRow).Select
Selection.Copy
Worksheets(strDeptSheet).Select
Range(Columns(o), Rows(m)).Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
The original code I used for this works great on one column but I knew the letter column each time I used it. Now I am trying to get two columns at a time and will be iterating through several based on user selections. I figure that will be faster to do both columns as the two columns are side by side.
I am getting an error on the PasteSpectial line "Run-time error '1004' PasteSpecail method of Range class failed.
I'm not sure where to go with this but I am assuming I have a problem with the Range selection lines on either the source or destination or both. The support is just for Macro errors.
I have a file with 2 columns (A=headers, B=values x 38K rows) and need to transpose them to rows.
I found code to transpose a specified number of rows in a column (i.e. every 5th row in the column)...
BUT my columns have variable numbers of data points, because in the exported file any head with a null value was excluded.
So I need to start new rows with a specific text value of "Username" occurs in column A.
I have the following situation and I'm trying to do this using a PC with Excel 2007.
I would like this:
T
N
O
O
C
O
E
I
M
I
T
[Code] ........
To look like this:
T
H
A
N
K
[Code] .........
This procedure will become part of a macro. The number of rows will vary but the number of columns will be the same (11 columns). I don't care too much about the order since I can later sort. As long as the data from all columns in now in one column.
macro for an Excel 2007 file. It has to be a macro. I have cells in two columns I need to look at. Column A will have a value of cat, dog, or mouse. Column B will have a date. If A2="mouse" AND B2<"1/1/2013" Then A2="" ElseIf A2=mouse" AND B2>="1/1/2013" Then A2="mouse". I don't need anything to happen if A2 is equal to cat or dog. The macro has to move down the entire A and B column: A3/B3, A4/B4, and so on until the end of the columns. Hope this makes sense. I've tried a few macro samples I found online but they don't quite fit what I need done, or I don't know how to modify it.
View 2 Replies View Relatedis there a way to combine the info from several columns into 1 list?
All of my columns have information in rows 1-20, but I want it all to automatically combine into a list in column B on a new sheet.
This is Excel 2007
I'm using Excel 2007. My pivot table seems to be limiting me to 256 columns in the Values/Data area. In researching below I believe that I should be able to have 16,000 columns in my Pivot Table.
[URL] The "Big Grid" and Increased Limits in Excel 2007
PivotTables Maximum rows displayed in a PivotTable report is 1 million.
Maximum columns displayed in a PivotTable report is 16,000.
Maximum number of unique items within a single Pivot field is 1 million.
Maximum number of fields visible in the Fields list is 16,000.
I am looking for a way of allowing users to edit the existing cells at their will, but simultaneously disabling the option to insert/ delete columns or rows.
By enabling Sheet Protection, I cannot find a way to do it. Can I?
I am on MS Excel 2007 by the way.
I found the way, just unlock all cells in Format Cells, Protection Tab. Then Protect sheet and de-select what you want to disable.
I am currently using MS Excel 2007. Is there a way in VBA to automatically insert missing columns based on a defined series or range of values?
For example, we have a report that displays columns of: Year 2004 to Year 2012 per column (9 columns in total).
Sometimes, it displays missing a year or years (thus; our report has less columns). For example, it only shows 2008 to 2012 (missing 2004 to 2007). At times, it misses some years in between. What we do is manually add those missing years by manually inserting columns then inputting the missing year as their column headers.
Is it posisble for VBA to check if the columns contain all of the defined Year range (for example, you've initially defined: Year 2004 to Year 2012)? Afterwards, all missing columns are automoatically inserted (in chronological order or based on your defined values or range).
I'm currently working on a process to recategorise products for a distribution company to give a category based on successful sales transactions.
Product Code
Category
Month 1
Month 2
[Code].....
This isnt the actual data in case you're wondering I'm doing this with 32k lines.
So, what I want to have is categories based on sales transactions, labelled with letters. So, cat A is sales in three consecutive and top X when total of three month consecutive sales, cat B being above X number of transactions in three months not already categorised by cat A. There is a Cat C, and various others which I can do myself, but i dont know how to make the category A work.
I'm using Excel 2007.
Macro code to find several column names in row 1 (which can be anywhere in the work sheet) and delete them e.g. date, month, code, amount etc.......
Excel version 2007