Excel 2007 :: VBA - Place Formula X On Sheet Y In Cell Z?
Jun 1, 2012
Excel 2007 I have 80 very similar sheets. The only difference is the sheet name (Phase A (1), Phase A (2) etc.). I want the formula located in cell B5 to be different on every sheet.
I have listed the desired formulas on a single seperate worksheet, named "Overview". On this sheet, the following columns have these data in them:
A - Sheetname (example: Phase A (1), Phase A (2) etc.)
B - Cell location (example B5, constant)
C - A formula (example: =Sheet1!G47, =Sheet1!G48, etc.)
I would like to create a macro that will loop through all the sheets, doing the following:
1. Check if the sheetname exists in column A of the Overview sheet
2. If it does, take the formula from column C of the Overview sheet
3. And put it in the cell specified in column B of the Overview sheet
Here is some code, to illustrate the above. I know the code is mostly nonsensical.
Code:
Sub Enter_formulas()
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
I hold some data in the Excel 2007 file. It's about 400 rows and about 10 columns. On occasion I have to print some values from this file. But it has to be in defined position on the paper. It is like I already have the prepared paper with fields, and I just have to fill some fields on the paper with data from the columns. Is it possible to make a program that will take each row that I label for printing, and print just some columns but in a defined position on the paper ?
appending excel sheet number in a formula. Here is the example.
In an excel book, I have sheets 1 to 50. In each sheet i have a standard format to enter the details. And in one sheet I want to keep some summary with required cells. I made a table by applying formula, for example in cell A1 i kept formula ='9'!$D$9. In this '9' refers sheet9. In the similar way i want to capture the data from all sheets.
Is there any formula to append the Sheet number automatically (like dragging the shell) intead changing sheet number manually. because it is wasting so much time.
I'm basically looking for something almost like an inverse function to INDIRECT. This function would first look at a cell's formula as a text string, parse out the first valid cell reference in A1 format, and return that cell as a text string.
Detail: I have a spreadsheet with cells that point to other values. I would like to get only the row number from the first cell reference in the formula residing in a given cell. For example:
Suppose A1 has the formula =AL267. and A2 has the formula =SUM(AL94:AL235)
I would like a formula in B1 that returns the text string, "AL267" so that I would know this is the first reference.
Ideally it could be dragged down to B2 such that it returns the text string "AL94" (and not "AL235") because AL94 is the first cell reference in A2's
Currently I am copying the formulas after hitting ctl+` and pasting that text into a text editor, followed by text operations to manipulate the results into the desired values. Any solution that didn't involve going out to notepad.
I have come up the code below. It imports contact information from Outlook contacts in a contact folder called Private Contacts. The below code has been copied and modified from this forum.
As it stands the macro creates a new workbook and places the data on that. What I need it to do is create a new worksheet with the name of private compare on the active workbook and then place the data on that worksheet.
How I can have a summary sheet that takes a number from the same cell on each sheet in my workbook and display it on the summary sheet in a list. one for each sheet.
And is it possible to create a summary page that automatically updates every time I create a new sheet? (adds the name of the sheet to the summary list (alphabetical order) and the value of the specific cell)? Excel 2007
when I open my sheet on another computer, all cell value which contain formula show no value. just blank. formula is link to same workbook on different tab. when I save as again on my desktop, all value appears. excel 2007 is using.
In excel 2007, I have an embedded image on a sheet which I want to make it hidden by default. When someone hovers over a particular cell say cell B3, then image should be displayed below this cell (sort of hyperlinking) and when the cursor or activell cell is not in B3 it should be hidden again. What steps/technique/VBA code will make it happen ?
Surely it's user error, but it honestly seems like Excel is not calculating 2 numbers correctly. At work, we have office 2010 where it is not calc'ing correctly; at home I have 2007 and it's fine, but anyway, here's my situation:
Cell A1: 0.003529 Cell B1: 0.48
If i put in Cell C1: "=B1/A1" i get a value of 136.000000 But that's not correct, it should be 136.01587... But if in Cell C1 i put "=0.48/.003529" then i get 136.01587...which is correct.
Why does using cell references in my formula give me the incorrect value?
I am trying to find a formula for a vlookup that will check one cell for any value but if that cell has no entry then it will check a different cell to return the value how do i do this?
TEAMCSS Wetherill ParkCT NAME
above is where i need it to look CSS wetherill Park is cell C1 the cell that has no entry is H1, both of these cells have validation lists in them,
I have a formula (below) that looks only at records based on specific filtering criteria or conditions; one of those conditions is the month of the year: ('Data Dump'!$Q:$Q,Summary!$A$26). This portion of the formula would change as a month is selected.
Opposed to having to rewrite the formula every time that I want to view a specific month, I want to automate the formula to change the first condition when a user selects a month from Column A. This would be a real time, automatic refiltering and recalculation as the user selects different months from Column A
Current Formula that filters and shows only January records. =COUNTIFS('Data Dump'!$Q:$Q,Summary!$A$26,'Data Dump'!$D:$D,Summary!$A$2,'Data Dump'!$M:$M,Summary!C$2)
Column A (January is in cell A26) January February March April May June July August September October November December
how put picture into cell as background. it means, after it's done, if i click on cell, i must be able write into cell like before change. i dont want solution through comments or shapes because picture will be on top of cell. and not as background
Upon user making selection from data validation list in Active Row Selection & Column A : i would like to do the following (is possible)
,,,,,,,,,,,,,,, Place formula in Active Cell Row & Column S
=MT4|BID! (followed by cell A1 but replace the "/" with "") followed by "m"
I have tried several combinations but with no success. Also - where would i place this code so that it automatically updates the formula in Column S as soon as the user changes selection in Cell A?
I have a workbook with a sheet per day, each sheet has a variety of 'jobs' as columns and a variety of people and kit as rows. Hours are manually input each day during the month.
Simplified version... These are two separate sheets 'M060114' and 'Tu070114'.
Monday Dig Drive
Dave 4 5
Bill 2 7
Tuesday Dig Drive
Dave 2 7
Bill 8 1
I have a Pivot Table on a separate sheet. This was created using the Wizard (ALT +D +P).
Dig Drive
Dave 6 12
Bill 10 8
So far, lovely.
But when I double-click on a number or right-click and choose 'Show Details' I don't get the sheet names in the newly created information sheet. I get the Row label, column label and a list of the entries.
So if I clicked on 10 above...
Row Column Value
Bill Dig 2
Bill Dig 8
That's fine with just a couple of entries but with about 80 columns and 250 rows spread across a month, therefore 30ish sheets, it's difficult marrying up the 'Show Details' sheet to the actual data.
So after all that, the question. Is there a way of getting the sheet name to appear in the 'Show Details' information sheet?
Whenever I enter a value say "X" in Sheet1, ColumnA I want the value to be autofilled into sheet 2, ColumnA if and only if value does not exist in sheet2, Column A.
I would like to add a makro that will ask, through a pop-up, to name a new sheet.I have the following formula that creates a new sheet and names it BMW and moves it around a little bit:
But I would like a formula that asks beforehand, through a pop-up, of a preferred name. In this case I will write BMW in the pop-up, and the new sheet will be named BMW.
I am not able to add a new Excel sheet in a existing file when I right click next to the existing page it gives this option only and I am using Arabic Charcters + I am not having too many sheets
I have been tasked with overhauling some simple inventory records that are currently being tracked via multiple spreadsheets and in multiple formats over various years. Thus far I have combined the data into two simple sheets (1 & 2) of the same Excel workbook. The first is just the basic listing of current inventory and locations. The second is a record listing various shipments into and out of the company location as a history log. I'm going to be continually trying to clean up the data and make things easier for the staff. The shipping history/log (Sheet 2) contains basic information in columns that include the serial numbers of the items shipped, which correspond to the S/N's in the global list columns within the inventory sheet(1). I would like to find a way to set up where a column in the inventory creates upon click (or have a maco button with the ability to) a popup which will display the history of the current rows serial number. In effect, list all rows in the second sheet with corresponding serial number or as a reverse strategy; filter out the rows that do not have the same S/N listed in one of its columns.
A piece of inventory comes in and is logged into the global inventory sheet (1) with Serial # ks1254. Likewise the shipping sheet (2) has the shipping information and document info logged with the same serial # listed. This is item has arrived and been shipped out multiple times, and occasionally the history of this item is requested. I have a column set aside in sheet 1, that i would like to act as a trigger for the above request. So if I filter and find the mention item, I would like the trigger to go and select out only the rows in sheet 2 that correspond to the S/N of the item in question. This can be presented as a pop up tab, a small window, even as a new sheet altogether I suppose. I guess I'm using Excel 2007, have a very dated limited VB skill set, so just hoping for some direction and steps.
I am using excel 2007 and when I right click on the worksheet tab, delete is greyed out. My workbook/sheet is not shared. I also had the problem owith row and columns. CommandBars("row").Reset sorted that out but I can't seem to sot out the tab issue.
I am trying to copy two columns to a different sheet in vba code. I will ultimately need to do this multiple times but I think I have the iteration part ok, it's just the copy part that seems to be wrong.
The original code I used for this works great on one column but I knew the letter column each time I used it. Now I am trying to get two columns at a time and will be iterating through several based on user selections. I figure that will be faster to do both columns as the two columns are side by side.
I am getting an error on the PasteSpectial line "Run-time error '1004' PasteSpecail method of Range class failed.
I'm not sure where to go with this but I am assuming I have a problem with the Range selection lines on either the source or destination or both. The support is just for Macro errors.
Am using a VB for auto transpose values to sheet 2 from sheet 1 in MS EXCEL 2007.
What code to add to the already existing VB so that if someone is using the sheet and leaving the cell in E12, for example, and saving it, then the next user should find it again on A3 but not on E12.
I have a file that has an original file format .xls
I saved as .xlsx (I am using Excel 2007) with a different name so I could make changes to the new file without changing the original.
That turn off compatibility mode.... but it is still "shared". While it is shared I cannot delete a sheet. In fact, I really don't even want it to be shared. If the file is open, and someone else opens it, I want it to open as "read only". I cannot uncheck the "Allow changes by more than one user at the same time. This also allows workbook merging." checkbox because it is greyed out.
My knowledge of Excel 2007 is minimal, from formatting individual cells, to creating column totals. I've used it for years in my household budgets. I have an attendance form which is about 3 pages long; currently, it's separated at page breaks, with column totals at the bottom of each 'page'. This is easy because the Row #s are infinite, right? Lately there have been regular adjustments, and I believe the project might be less cumbersome if it were spread out on separate sheets, but how to bring the rows of column totals to cumulative totals on the last sheet.
I'm working with a very large spreadsheet which has somehow divided itself into print areas. Each section has 'Page 1' or the equivalent as a background, behind the data itself. I thought it would be simple to remove this, but for the life of me I can't see how. I'm using Excel 2007.
I am importing data into an Excel 2007 worksheet from an online form. They are answers to 30 questions for up to 250 respondents. I was expecting to import one row of data for each respondent however the data is importing in a step like manner as below
Q1Q2Q3 AF169856 Y AF169856N AF169856N AF145723 N AF145723Y AF145723N
Any formula/solution to bring all of these responses into one line for each respondent ?
