Excel 2010 :: Create Percentage Inside Each Class?
Mar 24, 2014
As you can see in the attached file, I have a column of classes , a columns of related revenues and the total for each class. I have to create a column, next to these, where I can create the percentage with respect the sum of each class (as you can see by the formula). My problem is I am not able to say vba to find the totals and to create the percentage just with the revenues related to that total.
p.s: I have to work on excel2010.
View 3 Replies
ADVERTISEMENT
Mar 19, 2013
Im looking to create a bar chart in Excel 2010 where the totalnumber of widgets is 33 and the number produced so far is 11. The bar chart would be a single bar that represents the percentage complete (33%) with the chart maximum range being 100% which would represent the number 38.
Ive included a mock up example of what the data and chart would look like
View 3 Replies
View Related
Jun 10, 2014
As part of a program I'm writing in VBA (for Excel 2010), I have a textbox in a user form used as an interface to write a formula in cells in Excel.The resulting value of a formula from a cell is loaded up into the textbox. It would be shown in the textbox like "See 1.2 and 1.3" where the formula in the cell is
[Code].....
This is just used as an example but the principle is there. It is worth noting that I’m writing this for very inexperienced Excel users but I need them to be able to edit the string part of the formula without breaking the formula.
However where I’m struggling is to pick up a selection change event inside a text box already selected. I need to be able to check if the textbox.SelStart is within an address value or within the string in the textbox.
The event Enter won’t work if the user is already editing the textbox (i.e. typing stuff) and then clicking or using the keyboard arrow to move the cursor somewhere else inside the textbox. I don’t think the event Change is the solution either as it would mean that the user would have already typed something and as a result the formula may already be broken.
I have had a good look around and I didn’t find an event for a selection change inside a textbox. Does it exists and/or is there a way that would have the same result?
View 7 Replies
View Related
May 3, 2013
If I type in the VBA Editor immediate window
Code:
?application.WorksheetFunction.average(array(1,3))
I get the expected answer of 2, but
Code:
?application.WorksheetFunction.mode(array(1,3))
produces a pop up error of:"Unable to get the Mode property of the WorksheetFunction Class"
(Excel 2010 on 64 bit machine)
View 2 Replies
View Related
Jul 31, 2014
I have an excel database where I register cases. I have in it a button that creates a folder with and ID nr that is in column A (I create new ID nr in the next row, when I press the button it will create a folder with that ID nr and inserts a blank word document in it). We have a template that we copy to the folder (depending what type of case). The idea would be that once the template is filled in and ready to print, It would take the values from the ID nr and a reference number a few cells to the right. Is it possible to tell excel to open the word document in the folder and create a PDF version with the ID nr and reference number. (there are only 2 templates, so the macro would have to look for one of the two in the folder)
The name of the templates are: "Standard" and "Other".
I guess the best way to start maybe this would be that I select the cell with the ID nr and then press a macro button to have this done.
One thing that needs to be done, is to put a copy in the same folder and another in a second folder called "Binder" in my documents folder.
View 1 Replies
View Related
Jul 10, 2014
I use Excel 2010 andexample.xlsx cannot make my code working because of the so famous errore above.
I have several pivot tables (pt) in different worksheets (ws), and a list of items stored in an array I created. I've written a macro for setting ON all items in pt except those ones in the array (listOffnet within the code). Everything works properly.
Now, I would like to do the complementary action: setting OFF all items that are not in the array. Unfortunately, I get the error at line:
[Code]....
View 1 Replies
View Related
Nov 15, 2013
Trying to be slick with my macro I have 2 sheets collecting data in a workbook. I am attempting to send as attachments only those 2 sheets. I am getting an error at the following space within the code. How do I get around this?
Code:
Sub Send_to_Me()
' Send_to_Me Macro
Dim objTemp As Object
Dim FileExt As String
Dim TempFileName As String
Dim FileFullPath As String
Dim FileFormat As Variant
[Code] ......
This is the line that I get with the message above. It is only 2 sheets. Excel 2010 Windows 2007
View 2 Replies
View Related
Aug 8, 2012
I have row 2 formatted as a fraction and row 1 formatted as percentage.
I am looking for way to return the percentage of row 2 in row 1. I.E. If i have 3/4 in a2, I want it to return 75% in a1. I have figured a formula to return a percentage for numbers with only 1 item to the left of the division sign (i.e., 3/4). That correctly returns 75%. I am struggling with working a formula to also return larger numbers (e.g. 12/15).
I'm using excel 2010......
View 2 Replies
View Related
Jun 25, 2013
I am using this code (below) to hide certain rows or columns depending on what number is entered. Everything is working fine and I am at the point where I would like to share this excel sheet with others but I would like to lock certain cells so that others cannot alter the formulas. As soon as I lock the cells and then enter values into the unlocked cells, I get the "run-time error '1004': Unable to set the Hidden property of the Range class".
I am using excel 2010 x64.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)If Not Intersect(Target, Range("B3")) Is Nothing Then
If Range("B3").Value = 0 Then
Columns("G:P").EntireColumn.Hidden = True
Else
If Range("B3").Value = 1 Then
Columns("H:P").EntireColumn.Hidden = True
[code]....
View 3 Replies
View Related
Jul 31, 2014
The macro I'm writing (Excel 2010) is a loop that inserts a column based on a variable location, enters in a formula in the first cell, enters another formula in cell 2, then should fill that second formula to the last row, then keep going until the loop ends. There is always a chance that there will be blank cells to the left and right so I didn't use xldown. I've tried writing in multiple ways, but I keep getting the error.
Code:
Sub colfrmadd()
Range("A1").CurrentRegion.Select
colcnt2 = Selection.Columns.Count
[Code]....
View 1 Replies
View Related
May 11, 2014
Excel 2010 - Solver will NOT work with whole numbers and that is what I need (only whole numbers, i.e whole vials being used). So this is a drug/inventory problem. The drug is dosed as 25, 35,or 50 units/kg. Also a Max dose is reached with 100 kg. (this I can do). The trick is we want to use whole vial sizes and the vials come with varying amount of drug per vial (480-620 units/vial). We can enter our existing Inventory to get the exact units/vial and number of vials on hand. Now I need to figure out the best combination of vials in Inventory to use to get the closest to the dose needed. If Max dose is reached then the MOST we can go over the max dose is 5%. I'd like to see the percentage difference from the calculated or Max dose.
View 7 Replies
View Related
Mar 17, 2012
I am trying to add columns to my Excel 2010 Pivot Table to calculate % change of sales from year to year. The field name is "Year", while the item columns in the field are 2007, 2008, 2009, 2010, and 2011. How do I add a column between the years that will calculate the % change os sales up or down from the previous year?
View 2 Replies
View Related
Aug 7, 2012
I am trying to create a bar chart that changes color based on a percentage range. Any advice on how to do this? I am using Excel 2007, Windows XP, Sharepoint 2010.
View 1 Replies
View Related
Jan 17, 2012
Is there an Excel formula to remove the spacebar + characters in red, as shown below? I need to be left with only the last name, first name and the semicolon.
Mouse, Mickey ;
Microsoft Outlook has changed the way that email addresses from the global addressbook copy and paste (from version 2003 to version 2010).
View 8 Replies
View Related
Jan 24, 2014
The situation I have on my hands is over 200 users, were the majority can't use Excel's built in function to create PDF's.
Yes, I've tried to teach them, but I'm probably not a good teacher.
So, I've resorted to create a button at the top of the worksheet, that says "Create PDF". I thought this was gonna be very easy to program, but alas.
Is there a way to start the built-in Excel dialog that happens when you click "Create PDF/XPS" in "Save & Send"?
View 4 Replies
View Related
Dec 26, 2012
how do i make a bar chart on Excel! 2010
Basically i have these figures
Male : 21
Female : 18
I want to make a bar chart, When i use Excel and try to make it - i get a chart which shows the right column height but the Male and Female bars are BOTH IN 1 Colour. How do i make it so that male bar is blue and female is pink.
View 3 Replies
View Related
Jan 6, 2014
I am not too sure what this is called but I am using Excel 2010 and need particular document that I use repeatedly. Basically, if a particular cell in the document does not contain a phrase then I want Excel to automatically change the text in that cell to bold and red and 2 other cells in Excel to bold and red as well. For more information, the cell is 19–20 and K–O and the phrase in the cell is "No Inconsistency".
So if "No Inconsistency" is not found in that cell then it automatically changes the text in that cell to bold and red, and it also changes two other cells that are found in that document to bold and red as well. The coordinates of those two other cells are 19 with H–J, and the other one is 17 with H.
View 2 Replies
View Related
Feb 7, 2013
I'm trying to create a userform with a progress bar. The progress bar does NOT need to be 'real' and accurate, but simply act as a timer to illustrate to the user that the program is running some quick calcs.. Again, basic progress bar, with about about a 4 second completion time..
(using excel 2010 VB)
View 6 Replies
View Related
Nov 18, 2013
Code:
Date Jan-14..........Jun-14............Dec-14...........Jan-15..........Jun-15............Dec-15
Measure1
Measure2
Measure3
Code:
Date 2014 2015 2016
Measure1
Measure2
Measure3
I have two tables, examples above In the first table, Jan-14 is a dropdown value that updates all the values to the right by a month increment when a specific date is selected
I then have some code that populates the cells which have 2014,2015,2016 in them.
What I need to do next is populate the 2nd table with values based on the date ranges in the above table.
View 4 Replies
View Related
Nov 26, 2013
I'm trying to create a pivot in vba. I can record what I have done but if I run that recorded code, it returns an error "Invalid call procedure or argument".
Code:
ActiveSheet.PivotTableWizard SourceType:=xlDatabase, _
SourceData:=Sheets("Raw Data").Range("A1:AG" & Z), _
TableDestination:=Range("A3"), _
[Code].....
View 1 Replies
View Related
Jan 7, 2014
I have a workbook which needs a new sheet for each day of the month.I normally just create and re-name each sheet with the date...is there a simpler way where i can create the new sheet with a date for each month instead of doing indiviually?
Excel 2010
View 9 Replies
View Related
Feb 12, 2014
I have 6 columns. The 5th and 6th columns are the most important. The 5th contains a figure and the 6th contains a type.
Bascially I am trying to do a basic chart showing the following 2 things. A. Do a percentage chart of column 6 (service) but not of percentage of hoem many lines the product is in. Not based on percentage of how many times Apples are shown compared to other products. I need it to add up everything, then do a percentage of total amounts of oranges and total of for Apples from the figures on column 5. Also, if possible, the pie chart will even show teh actual total figure per product in each (or next to) each pie chart slice.
know the easiest way to do this (step by step) in Excel 2010 and then I can perhaps write a macro for the future?
View 1 Replies
View Related
Apr 24, 2014
I need to create 3 or 4 detailed reports from an excel 2010 worksheet.
My worksheet contains data including date, invoice number, company , consultant, days, dollars. There are approximately 100 records in the worksheet.
Requirement 1 :I want to use excel 2010 to automatically generate a series of reports broken down by consultant showing date, invoice number, company, and consultant with totals for days and dollars, when all the records for consultant 1 are listed, then I want to show consultant 2.
Same for any other consultants with a grand total at the end.
My understanding is that excel 2010 makes this process very simple .
View 3 Replies
View Related
Mar 8, 2014
I am trying to create a database that contains data taken from several work books that i have saved in one folder on my hard drive. These workbooks contain quite a lot ** data, but i only want to extract the data i want to instead ** having to extract it all? these works books are used by several other people as well, so i want it to be able to update as data changes.
I was thinking about using data links, but that only seems to extract all the data instead ** just what i want?
View 1 Replies
View Related
Mar 29, 2014
I need to create a separate PDF file for each Excel Worksheet, each worksheet has a different name.
I am using Excel 2010
View 1 Replies
View Related
Jan 21, 2012
I get a "Object variable not set" error when creating a Pivot Table from a cache. I want the destination to be in a different sheet in the workbook. I set the new worksheet as: Set WSD = Worksheets.Add and I reference WSD.Cells(2,FinalCol +2) in the destination field of the CreatePivotTable method. I use the code from the Excel 2010 VBA book I got last week.
View 9 Replies
View Related
Sep 21, 2012
Creating a pop up message when a cell value is over 100%.
I have in cell T21 "=sum(t7:T21) but I'd like to give a pop up message when this cell value is over 100%.
Excel 2010
windows XP
View 2 Replies
View Related
Apr 5, 2014
I am working on a schedule worksheet, the days are the columns and the staff member names go down the rows. I want to create a new cell value based on a condition on each row. I have been successful working with one row but how to efficiently do the same for each row.? I'm working with Excel 2010.
View 9 Replies
View Related
Jan 20, 2012
Using Excel 2010, I am trying to create a macro to insert INDEX and MATCH formulas on a sheet that reference Tables on the same sheet.
The formula works fine when entered in a cell where I can point to the Table. Now I need to put the formula in a macro where it will automatically reference the first Table on the sheet.
Here is an example of the formula:
Code:
=INDEX(Table1891034445678912822253536[#All],
MATCH($I35,Table1891034445678912822253536[L/I],0)+1,
MATCH(L$34,Table1891034445678912822253536[#Headers],0))
Just look at that Table name!!
The original file has multiple sheets and multiple Tables on each sheet. No naming convension was used in naming the sheets or Tables.
Can I cycle through all the Tables on a sheet and rename each of them? For example, find the first Table on the sheet closest to cell A1 and rename it Table 1, find the next Table and rename it Table 2, etc.
Is there a way to reference Tables based on an index (similar to sheets)? Is there a Table(1) and Table(2) referencing system? Is it on a per sheet basis or across the entire workbook? That is, can there be more than one Table(1) in a file?
Can I start in cell A1 and find the first instance of a Table and return the name or index of that Table?
View 2 Replies
View Related
Feb 2, 2013
There was an option in excel 2007 in the pivot wizard to use an existing pivot table report as the source for a new pivot. I cannot find this in Excel 2010.
View 2 Replies
View Related
