Excel 2007 :: Text Formatting With Data From Multiple Columns?
May 8, 2013My data is in column A. I need to have the data as in column E and F. Column E is the field names.Rows can be up to anywhere and may very.
Excel 2007
A
B
C
D
E
F
ADVERTISEMENT
Excel 2007 :: ID Number Formatting Lost After Text To Columns Is Used
Jul 16, 2014I have a text file that I need to open in MS Excel 2007. The file contains the following data. (Each column is delimited by the "|" character.)
Part #|Inventory ID
1743|213,221
1864|10,40
1948|1170,1180
5265|100,104,107,10004
Ultimately, I need three columns but the data needs to look the same as it did before I opened the file.
When I open the file for the first time, I use “Text to Columns” to delimit the fields by the "|" character. The problem is that the Inventory IDs in the middle column get a bit whacky.
Here's what I'm left with:
Part # Inventory ID
1743 213,221
1864 10,40
1948 11,701,180
5265 10,010,410,710,004
The comma is retained appropriately when there are two 2- or 3-digit Inventory IDs.
When a row has multiple, longer Inventory IDs or Inventory IDs that vary in length, the comma is moved to every 3rd decimal place.
I tried putting quotation marks around the data before I opened the text file for the first time but that didn’t do anything. I tried Custom Formatting to retain the comma position (0000,0000) but this only worked when I had two 4 digit IDs. I also changed the number type to Text and General. Once the comma was changed, I couldn’t figure out how to get it back.
How to best retain the format of my Inventory IDs.
Excel 2007 :: Conditional Formatting And Adding Text To Cell Based On Multiple Cells
May 31, 2013I'm using Excel 2007. I would prefer to stay away from the scripting side of the house if possible. This is basically a 3 day forcast weather chart. The top is the actual weather data, the bottom portion is a color coded reflection of how the weather affects various things.
This product is created in excel, but will be embedded into a powerpoint. It will be updated daily. Here is what I would like. I want the color chart at the bottom to update automatically based on the data I enter above. I have a grasp that I can update the color through conditional formatting, although im not exactly sure what that will look like with all of those cells.
I also figured out that I can insert the letters in those lower cells with something similar to " =IF(C6>90, "T", "") " which would put in a 'T' for Temperature when the temperature got above a certain degree.
I run into a problem when I have multiple factors affecting a single cell. For instance on the example in day 2 of my image. Personnel are affected by Temperate AND UV Index. How would I set up that cell to pull that information from both of those cells and display it accordingly? I would prefer the letters to stay separated by the comma, but I could live without that. The default cell color will be green, with the potential to be yellow or red. I left a few examples of possible situations on day 2 and 3.
Excel 2007 :: Move Recurring Data From 1 Column To Multiple Columns
Jun 6, 2014I am using excel 2007. I have data which, instead of being posted on multiple columns, is all within 1 column. The data most simply has the characteristics of:
AAA
AAA - description
BBB
BBB - description
CCC
CCC - description
and so on..
I would like to move the descriptions from column A to column B:
AAA AAA - description
BBB BBB - description
CCC CCC - description
and so on...
What would be the best way to accomplish this?
Excel 2007 :: Automatically Transfer Columns From One Worksheet To Another In Multiple Columns?
May 4, 2013I would like to take the data from worksheet1 and put into worksheet2 but limit the length of a list (the real spread sheet has over 100 rows and i would like them in 4 sets of 25 versus the example I provided). Is there an array or macro that would make this work (keeping the formatting)..
Excel 2007
B
C
3
Name
Company
[Code].....
Excel 2007 :: Conditional Formatting On Multiple Cells?
Apr 17, 2012I'm using 2007 and want to add conditional formatting to multiple cells.
Say I have 3 columns and 10 rows of data (A1:10 ; B1:10 ; C1:10). I want to add an icon set to everything in columns B and C based on a comparison with the figure on their immeidate left. So B1 is compared to A1, C1 to B1 etc.
When I do it though it compares everything to A1 (formula in the Conditional Formating is =$A$1 and it won't let me remove the $'s). It looks to me like I can't do it and have to add the formatting to every cell indiviually (which is quite a lot).
Excel 2007 :: Vlookup Using Multiple Columns?
Jun 27, 2011I'm looking to simply find a function that allows me to lookup a certain value in a table of data and return the value in a specific column. So if I looked up the current date, 6/27/2011, it would return the week it is in (26). I dont want to be limited to just the monday column however, as the dates I will be throughout the entire week. Is there an easy way to do this in excel 2007?
MondayTuesdayWednesday ThursdayFridaySaturdayWeek
5/2/20115/3/20115/4/20115/5/20115/6/20115/7/201118
5/9/20115/10/20115/11/20115/12/20115/13/20115/14/201119
5/16/20115/17/20115/18/20115/19/20115/20/20115/21/201120
5/23/20115/24/20115/25/20115/26/20115/27/20115/28/201121
5/30/20115/31/20116/1/20116/2/20116/3/20116/4/201122
6/6/20116/7/20116/8/20116/9/20116/10/20116/11/201123
6/13/20116/14/20116/15/20116/16/20116/17/20116/18/201124
6/20/20116/21/20116/22/20116/23/20116/24/20116/25/201125
6/27/20116/28/20116/29/20116/30/20117/1/20117/2/201126
7/4/20117/5/20117/6/20117/7/20117/8/20117/9/201127
7/11/20117/12/20117/13/20117/14/20117/15/20117/16/201128
7/18/20117/19/20117/20/20117/21/20117/22/20117/23/201129
7/25/20117/26/20117/27/20117/28/20117/29/20117/30/201130
8/1/20118/2/20118/3/20118/4/20118/5/20118/6/201131
8/8/20118/9/20118/10/20118/11/20118/12/20118/13/201132
8/15/20118/16/20118/17/20118/18/20118/19/20118/20/201133
8/22/20118/23/20118/24/20118/25/20118/26/20118/27/201134
8/29/20118/30/20118/31/20119/1/20119/2/20119/3/201135
9/5/20119/6/20119/7/20119/8/20119/9/20119/10/201136
9/12/20119/13/20119/14/20119/15/20119/16/20119/17/201137
Excel 2007 :: VLookup Across Multiple Columns
Feb 20, 2012I am using Windows xp and Excel 2007. I'm creating a user form and have a vlookup formula that goes to a table and looks up calories and sodium based on the text entered by the user. My problem is that I want to be able to populate the 3 columns with information and then sum the values that are returned to the Calories and Sodium columns. Is that possible with Vlookup?
=IF(ISNA(VLOOKUP(F8&G8&H8,Food!A:E,4,FALSE)),0,VLOOKUP(F8&G8&H8,Food!A:E,4,FALSE))
Water 24 ozOther DrinksGelsSolid FoodCaloriesSodium
00
00
00
Excel 2007 :: Categorizing By Multiple Columns And Rank?
Jun 13, 2013I'm currently working on a process to recategorise products for a distribution company to give a category based on successful sales transactions.
Product Code
Category
Month 1
Month 2
[Code].....
This isnt the actual data in case you're wondering I'm doing this with 32k lines.
So, what I want to have is categories based on sales transactions, labelled with letters. So, cat A is sales in three consecutive and top X when total of three month consecutive sales, cat B being above X number of transactions in three months not already categorised by cat A. There is a Cat C, and various others which I can do myself, but i dont know how to make the category A work.
I'm using Excel 2007.
Excel 2007 :: Moving Data From One Worksheet To Another Keeping Data And Formatting?
May 5, 2014I am working on a project that has 5 worksheets. I have been able to figure out everything else I need to do but this has me stumped. I have data in Sheet1 A6, that i want to place in Sheet2 A6, Sheet3 A6, Sheet4 A6 and Sheet5 A6 and keep data and formatting(BOLD AND UNDERLINE). So I change Sheet1 A6 and the other 4 sheets change also. I'm using Microsoft Excel 2007.
View 1 Replies View RelatedExcel 2003 :: How To Use Conditional Formatting Across Multiple Columns
Jul 14, 2014I am using Excel 2003. I have a spread sheet and I am trying to use conditional formatting. But I can't figure out how to use conditional formatting across multiple columns and so I have been doing each column individually which has been kind of a hassle. I also am trying to figure out how to put in a formula so that every occurrence of a certain text will show up a certain color. I know that I can just do "cell value is", "equal to" and click on the cell, but the information in this spread sheet is organized alphabetically and is going to be added to frequently therefore every time I add information it re-organizes. This then messes up my conditional formatting because the text value that was in the cell gets bumped up or down.
View 2 Replies View RelatedExcel 2007 :: Pull Data Into A Cell From Another Worksheet That Has Conditional Formatting?
Jul 20, 2012I have a Workbook (Test 1) with several columns A-S. I'd like to be able to continue to add data into Test 1, and have some of the data pulled into a new Workbook (Test 2). Basically pulling data from Test 1, cols. D, L, J, E, I, C, K, Q and S - into the new workbook Test 2.
Some of the columns in Test 1 have conditional formatting and data validations, but I need the data in these columns to be replicated into Test 2 - without having to copy/paste between the 2 workbooks.
I figured how to do this in Excel 2010, but my office is still using 2007 and I can't seem to get it to work....
Excel 2007 :: Merging Data Within Two Columns Into One
Dec 5, 2013I have two columns
Req | Expiry Date
yes 11/12/2010
yes 08/06/2012
yes 02/07/2017
how do i merge both columns into one.. not losing any data hence
Req Expiry Date
yes 11/12/2010
yes 08/06/2017
I am using excel 2007 ITS FOR WORK!
Excel 2007 :: Match Data In Two Columns And Return Header
Apr 20, 2012I have two columns with team abbreviations, one simply says whether they are AL or NL the other is the result of a search with multiple occurrences of the team name. I need to match the long list with the short and put the column header AL or NL in the adjacent cell.
I'm using Excel 2007
The last formula I tried was =INDEX($AY$1,MATCH(BB2,$AY$2:$AY$15,0),0)
The screen shot actually just part of the sheet copied since the screen shot look like a broken html page Ok I give up. I copy and paste a jpg it turns into code, I copy and paste the spreadsheet and formatting vanishes, I don't have a URL for the picture... I did look at FAQs and didn't find picture rules but I will look again. Meanwhile. . .
It's just six columns of data. The short list is in AY from AY2 : AY15
The long list is in BB from BB2:BB505
The column header "AL" is in AY1 and NL is in AZ1
Excel 2007 :: Combining Data With Multiple Row Entries
Mar 7, 2012I'm using Xl 07 and need to combine two sheets of contact info and have them sorted alphabetically.
Each contact entry takes the follwing form(comma's denote new columns)
55555, Name , John, Smith, Tel: , 555-555-5555
ID , Company, XXX , , Email, xxxxxx
Each sheet has a list of 200 or so entries about 400 rows long. The entries on each sheet are sorted in alphabetical order. the names also alternate alphabetically from sheet to sheet. So when i look at the entries on my final sheet, the 1st will be from sheet1 the second from sheet2 the third from sheet1 and the fourth from sheet2 etc.
I'm not sure whether I should build a new list by pulling alternating entries from each sheet or just copy one list below the other and then try to sort it somehow.
Excel 2007 :: Splitting Data Into Multiple Sheets
Apr 24, 2013Writing code in VBA for splitting data into multiple sheets?
The split needs to be based on value in one of the columns and the sheet where the data will be sent to should get sheet name same as value in the column.
Following is the input sheet, the data needs to be split based on entry in the column "Job Type".
Excel 2007ABCD1Invoice NumberJob TypeInvoice DateAmount21234Repair
04-Apr-13$20033456Contract Work10-Apr-13$40047896General23-Apr-13$100Input Sheet
Following tables are showing data split into multiple sheets and the sheet names are the same as entry under the column "Job Type"
Excel 2007ABCD1Invoice NumberJob TypeInvoice DateAmount21234Repair04-Apr-13$200Repair
Excel 2007ABCD1Invoice NumberJob TypeInvoice DateAmount23456Contract Work10-Apr-13$400Contract Work
Excel 2007ABCD1Invoice NumberJob TypeInvoice DateAmount27896General23-Apr-13$100General
Excel 2007 :: Move Data From Multiple Rows To One And Delete?
May 2, 2012I'm working in Excel 2007 and need to move data from multiple rows to a single row if the ID matches.Below is sample data I would be working with. I want to move data from columns F-U to the right of the original data in the row above it. I would also like to delete the rows that had data moved.
GIDSurnameNameEmployee Number OriginalDate of birthGranting ARE
Employing ARECountry Employing ARECHCM Supplier IDVehicle
Investmt. shares / Awards at termination dateMatching Shares
at termination dateTermination
[Code]....
Excel 2007 :: Consolidating Data From Multiple Lines Of Sheet
Jul 17, 2012I've seen some examples here and I think I understand the consolidation function. However, my query has the added level of needing to consolidate each member:
I have a table of data that looks like this:
SURNAME
NINO
CODE
NO OF UNITS
Smith
AB123456C
8AIA
1986.4805
[Code] .........
There are a number of clients that have multiple investments that are shown by an alpha numeric code. I need to consolidate the number of units for each member in to one line. Ideally the output would look like this:
SURNAME
NINO
CODE
NO OF UNITS
Smith
AB123456C
8AIA
2278.4058
[Code] ...........
Excel 2007 :: Transpose Data From Column A1 To Multiple Rows
Feb 26, 2014I need to transpose data from Column A to Row 2 and down.
The data in column A is in sections of 19 rows and then a blank cell and another 19 rows of data contimuously, It is a dynamic range and can contain many thousands of Rows.
The data needs to be transposed from Column A to row 2 (row 1 has the head line for each column) so the 19 lines of data is now spread accross 19 columns in row 2 and the next section from column A is spread accross the 19 columns in row 3 and so on.
My data looks similar to the below. (Test Number 0001 starts in A1)
Test Number 0001
21-Feb-2014
Kettel
Office
Demo
[code]....
I use Excel 2007
Excel 2007 :: Error While Copying Extracted Text File Data?
May 7, 2012I am trying to develop a code which extracts the data from text files inside a folder (Folder test in my desktop) into one sheet. The Macro is in the workbook “Text Extract” which is an excel 2007 file. The data of each text should be copied to Sheet1 of this workbook one below the other. For testing purpose I have kept only one text file in the folder and was trying to copy the data from the text data extracted sheet to Cell A1 of Sheet1 of workbook “Text Extract”. The code works fine till copying the data, but shows below error in the line “Selection.Paste”:
Run time error 438: Object doesn’t support this property or method.
Below is the code:
Sub LoopThroughFiles()
Dim strFile As String
Dim strPath As String
[Code]....
Excel 2007 :: Generate Multiple Workbooks With Worksheet Data Source
Jan 17, 2012I am looking for macro where it can generate multiple workbooks with a single worksheet data source. I have this worksheet with data which is look like this:
[IMG][/IMG]
This data will be places in 1 workbook for each of line with given file name as page number above those workbooks generated will have same information for each line but at different cell position such as: take this example at line 3
and
Microsoft Excel 2007
Window 7Pro 64bit
This line could be up to 50 lines of data. I try google search but found most about consolidate multiple workbooks to single worksheet. I do have VBA reference that I refer to from [URL] ......
How to put the information from the worksheet into specific position in the workbooks.
Excel 2007 :: Summing Column On Data Sheet Based On Multiple Criteria
Feb 23, 2012Excel 2007. I have an Excel file that contains a data dump from an external database file with numerous analytical sheets that perform calculations. Some of these calculations utilize the SUMIFs function that was introduced in Excel 2007. This function does an outstanding job of summing a column on the data sheet based on multiple criteria.
However, someone high up in management in my organization would like to "drill down" into the data behind the
SUMIFs formulas to get a quick snapshot of the lines in the database that roll into the
SUMIFs formula. =SUMIFS(DataBase!E:E,Data!A:A,C7,DataBase!B:B,D7,DataBase!C:C,E7,DataBase!D:D,F7)
If I double click on a cell with the formula above, Excel takes me to the Database tab and selects Column E which is close, but not exactly what I need. What I really need is for Excel to only show the rows on the database sheet that make up the total in the SUMIFs formula and not the entire data dump from the database.
At present, we have to manually apply the autofilter on multiple columns to show the rows in column E that make up the total in the SUMIFs formula which is a tedious and time consuming task. Is there a way to force Excel to do this? Suggested custom database application or pivot tables, but we do not want to reinvent the wheel.
Excel 2010 :: Conditional Formatting - Highlight Values Based On 2 Columns Of Numerical Data
Apr 12, 2013I'm having issues with Excel's 2010 conditional formatting. Seems easy to use, but I'm trying to highlight values based on 2 columns of numerical data. Example:
Column F:
6
6
14
Column L:
3
NA
17
I would like Column L to highlight values that are greater than Column F in green. If they are less than Column L then highlight them in red.
Seems I was able to do this with Excel 2003, but I don't understand the 2010 version.
Excel 2007 :: Not Saving Formatting Changes
Oct 13, 2008I have someone in the company that I work for that is using Excel 2007 in compatibility mode, that is trying to make changes to an Excel 2003 file.
The file in question is a large one. She can type in the rows and columns and anything that she types will save. However if she trys to make any changes to the file in terms on calculations or highlighting specific columns, then these changes are not saved.
I have found out though that if she saves this 2003 file in the 2007 format, then all over her changes will save. She can't save it in the 2007 format due to some people still on 2003 that edit this file as well.
Excel 2007 :: Conditional Formatting Not Available?
Sep 20, 2011I'm trying to clear conditional formatting (icon set) that I was experimenting with, but no joy at all. The only function within the "Styles" section is Cell Styles -- conditional formatting & fornat as table choices are grayed-out.
I've tried to delete and re-enter the data, clear formats, clear all, copy and paste, format painter...nothing worked.
Excel 2007 :: Formatting As Currency VBA?
Mar 13, 2012I have this code
Code:
MsgBox Format(1267.5, "Currency")
I see the following as output on MS e ?1,267.50
I was expecting a currency symbol instead of ?. Not sure if i need to change some setting in excel.
Excel VBA - Selecting Range Of Data Considering Multiple Columns
Feb 11, 2014I would like to loop through cells row wise.
Columns which have data are A:E
modify below code to select the range from columns A to E?
[Code] ........
Excel 2010 :: Comparing Multiple Columns Of Data (Last Name / First Name)
Aug 8, 2012I'm using Excel 2010 on Windows 7.
I have 2 worksheets. One has Employees and the devices they have. Last name, First Name, Device each in their own colulmn. Many have more than 1 device so they have multiple entries on seperate rows.
Another worksheet has Employees and thier location. Last name, First Name, Location. Again, all on seperate columns.
It would look something like this
Sheet1
Lastname
Firstname
Device
Johnson
[Code]...
So I'm tasked with combining them into 1 sheet with last name, first name, device and location. The issues I'm having are:
1) A team member could have multiple devices
2) A last and/or first name can appear many times, so a simple Vlookup against lastname won't work - it has to somehow also compare against both.
Excel 2007 :: Formatting A Column For Dates?
Nov 7, 2013I am using Excel 2007 and am having some trouble formatting a column for dates. I am setting up a template spreadsheet for the company I work for. The template spreadsheet has a sheet for entering the raw data and a sheet for summarizing it. I need new dates that are to be entered to be formatted correctly. I have set up a sample spreadsheet and inputted some sample data which looks like the following:
Date
06.11.13
07.11.13
08.11.13
05.10.13
06.09.13
Now if I format these cells as English(UK) dates with the "dd.mm.yy" format the data>sort cannot sort these dates from oldest to newest. I can correctly sort them by using "text to columns" however if i do this then it only format's the cells that currently have a date entered into them and not any new date entries.
So in summary: Format cells into a date format does not allow dates to be sorted using the data>sort tool. (I assume that as they cannot be sorted ,a formula that searches for cells with dates before a certain date will not work either) Text to columns does not allow new entries to be formatted in the same way as the cells that had data in them when the text to columns tool was used.
Is there a way to format blank cells so that they will recognize the data inputted as a date?
Excel 2007 :: Subtotaling Using Conditional Formatting?
Jun 19, 2014I have data in several columns going left to right. In column N I subtract column H from column I and then in column O I subtract column I from column J. I then use conditional formatting to indicate whether column N is greater than 45 and column O is less than 120, using different formats for each. If the cell value does not meet the condition then there is no conditional formatting used in that cell.
I want to subtotal each column to indicate the amount over or under 45 in column N and over and under 120 in column O and I would like to know if I can do it using the colors in each cell. Most rows do not meet either condition but a few rows do meet both conditions and I don't think sorting and subtotaling is not going to give me what I want.
I have about 7,000 rows in this worksheet and I am going to be removing lines and then maybe adding them back and I would like to track the balances as the data gets moved around. I can use Window Watch for that.
I am using Excel 2007, don't know how to write VBA and would really like a solution that does not use VBA.