Excel 2007 :: Combining Data With Multiple Row Entries
Mar 7, 2012
I'm using Xl 07 and need to combine two sheets of contact info and have them sorted alphabetically.
Each contact entry takes the follwing form(comma's denote new columns)
55555, Name , John, Smith, Tel: , 555-555-5555
ID , Company, XXX , , Email, xxxxxx
Each sheet has a list of 200 or so entries about 400 rows long. The entries on each sheet are sorted in alphabetical order. the names also alternate alphabetically from sheet to sheet. So when i look at the entries on my final sheet, the 1st will be from sheet1 the second from sheet2 the third from sheet1 and the fourth from sheet2 etc.
I'm not sure whether I should build a new list by pulling alternating entries from each sheet or just copy one list below the other and then try to sort it somehow.
View 1 Replies
ADVERTISEMENT
Aug 15, 2008
I have a long (about 180 000 rows) list of part numbers, descriptions, prices and quantities. There are many duplicate part numbers. I need to go through and find the duplicates, add all their quantities into one cell and delete the remaining duplicates. I have used conditional formatting to find the duplicates easier but cannot use the remove duplicates button as it will delete the whole row and I need the quantity information in each row.
Any formula or macro I can set up to search the part number column (F) for duplicates and add the figures in the quantity column (J) and THEN delete the duplicate part number rows?
Maybe I need to put the new combined information in another sheet?
View 8 Replies
View Related
Jan 21, 2014
This is a sample of what I am trying to accomplish (file attached). I have information in one worksheet (called MasterList) and a second worksheet called (RecordList). I want to take information from MasterList and RecordList and combine them to produce a report (Results). Assume the user does not have access to MasterList or Results.
The user would enter the UID in RecordList, which then populates information from MasterList. There can be multiple entries for each UID and there is no set number of entries (could be 1, could be 500)
The user enters the UID into RecordList, which populates information from MasterList. The user then adds in the additional information into the fields.
What I want is all the information from the Master List must be reported whether anything exists in RecordList or not. If there is information in the RecordList, display it and on a seperate line for each entry. Each UID then needs to be totalled (which can be done through pivot table later).
View 1 Replies
View Related
Mar 25, 2014
I know about using countifs and or but utilizing sum(countif(..... [all because of this site] - but I have a statement that is quite long and is confusing me when trying to reduce it... if not then I can just use this and it'll be fine... but I would really like to reduce it if possible... here it is:
=COUNTIFS(Data!$A:$A,Sheet1!$A2,Data!$AA:$AA,"<"&Sheet1!B$1,Data!$AF:$AF,">"&Sheet1!B$1,Data!$AJ:$AJ,">"&"30")+COUNTIFS(Data!$A:$A,Sheet1!$A2,Data!$AA:$AA,"<"&Sheet1!B$1,Data!$AF:$AF,"",Data!$AJ:$AJ,">"&"30")
Basically I have a Data sheet that has 19,000+ records that have data from A to AJ... I am tasked with trying to find how many open work orders there are in our company on each given day that were submitted 30 days prior to a specific date. A = Region, AA = Date Submitted, AF = Date Completed and AJ = Days open.
The table looks like this:
1-Feb 2-Feb 3-Feb 4-Feb .........
Midwest 39 39 39 42
Northeast 119 119 120 126
Southeast 46 47 50 54
Southwest 53 53 53 57
West 53 53 53 60
Total 310 311 315 339
View 4 Replies
View Related
Feb 4, 2012
I have two line charts in Excel 2007.
One chart has the values going down from upper left to lower right
The other chart has the values going up from lower left to upper right
Is there anyway to merge these charts to see if they intersect at all?
View 1 Replies
View Related
Apr 24, 2013
Writing code in VBA for splitting data into multiple sheets?
The split needs to be based on value in one of the columns and the sheet where the data will be sent to should get sheet name same as value in the column.
Following is the input sheet, the data needs to be split based on entry in the column "Job Type".
Excel 2007ABCD1Invoice NumberJob TypeInvoice DateAmount21234Repair
04-Apr-13$20033456Contract Work10-Apr-13$40047896General23-Apr-13$100Input Sheet
Following tables are showing data split into multiple sheets and the sheet names are the same as entry under the column "Job Type"
Excel 2007ABCD1Invoice NumberJob TypeInvoice DateAmount21234Repair04-Apr-13$200Repair
Excel 2007ABCD1Invoice NumberJob TypeInvoice DateAmount23456Contract Work10-Apr-13$400Contract Work
Excel 2007ABCD1Invoice NumberJob TypeInvoice DateAmount27896General23-Apr-13$100General
View 9 Replies
View Related
May 2, 2012
I'm working in Excel 2007 and need to move data from multiple rows to a single row if the ID matches.Below is sample data I would be working with. I want to move data from columns F-U to the right of the original data in the row above it. I would also like to delete the rows that had data moved.
GIDSurnameNameEmployee Number OriginalDate of birthGranting ARE
Employing ARECountry Employing ARECHCM Supplier IDVehicle
Investmt. shares / Awards at termination dateMatching Shares
at termination dateTermination
[Code]....
View 3 Replies
View Related
Jul 17, 2012
I've seen some examples here and I think I understand the consolidation function. However, my query has the added level of needing to consolidate each member:
I have a table of data that looks like this:
SURNAME
NINO
CODE
NO OF UNITS
Smith
AB123456C
8AIA
1986.4805
[Code] .........
There are a number of clients that have multiple investments that are shown by an alpha numeric code. I need to consolidate the number of units for each member in to one line. Ideally the output would look like this:
SURNAME
NINO
CODE
NO OF UNITS
Smith
AB123456C
8AIA
2278.4058
[Code] ...........
View 9 Replies
View Related
May 8, 2013
My data is in column A. I need to have the data as in column E and F. Column E is the field names.Rows can be up to anywhere and may very.
Excel 2007
A
B
C
D
E
F
View 8 Replies
View Related
Feb 26, 2014
I need to transpose data from Column A to Row 2 and down.
The data in column A is in sections of 19 rows and then a blank cell and another 19 rows of data contimuously, It is a dynamic range and can contain many thousands of Rows.
The data needs to be transposed from Column A to row 2 (row 1 has the head line for each column) so the 19 lines of data is now spread accross 19 columns in row 2 and the next section from column A is spread accross the 19 columns in row 3 and so on.
My data looks similar to the below. (Test Number 0001 starts in A1)
Test Number 0001
21-Feb-2014
Kettel
Office
Demo
[code]....
I use Excel 2007
View 6 Replies
View Related
Sep 27, 2012
I am using a ComboBox in Excel 2007 in a UserForm. It is drawing on a row source which populates empty cells duplicates. How do I get the drop down box results to only show unique values and nonblank entries?
View 4 Replies
View Related
Jun 6, 2014
I am using excel 2007. I have data which, instead of being posted on multiple columns, is all within 1 column. The data most simply has the characteristics of:
AAA
AAA - description
BBB
BBB - description
CCC
CCC - description
and so on..
I would like to move the descriptions from column A to column B:
AAA AAA - description
BBB BBB - description
CCC CCC - description
and so on...
What would be the best way to accomplish this?
View 4 Replies
View Related
Jan 17, 2012
I am looking for macro where it can generate multiple workbooks with a single worksheet data source. I have this worksheet with data which is look like this:
[IMG][/IMG]
This data will be places in 1 workbook for each of line with given file name as page number above those workbooks generated will have same information for each line but at different cell position such as: take this example at line 3
and
Microsoft Excel 2007
Window 7Pro 64bit
This line could be up to 50 lines of data. I try google search but found most about consolidate multiple workbooks to single worksheet. I do have VBA reference that I refer to from [URL] ......
How to put the information from the worksheet into specific position in the workbooks.
View 1 Replies
View Related
Feb 23, 2012
Excel 2007. I have an Excel file that contains a data dump from an external database file with numerous analytical sheets that perform calculations. Some of these calculations utilize the SUMIFs function that was introduced in Excel 2007. This function does an outstanding job of summing a column on the data sheet based on multiple criteria.
However, someone high up in management in my organization would like to "drill down" into the data behind the
SUMIFs formulas to get a quick snapshot of the lines in the database that roll into the
SUMIFs formula. =SUMIFS(DataBase!E:E,Data!A:A,C7,DataBase!B:B,D7,DataBase!C:C,E7,DataBase!D:D,F7)
If I double click on a cell with the formula above, Excel takes me to the Database tab and selects Column E which is close, but not exactly what I need. What I really need is for Excel to only show the rows on the database sheet that make up the total in the SUMIFs formula and not the entire data dump from the database.
At present, we have to manually apply the autofilter on multiple columns to show the rows in column E that make up the total in the SUMIFs formula which is a tedious and time consuming task. Is there a way to force Excel to do this? Suggested custom database application or pivot tables, but we do not want to reinvent the wheel.
View 2 Replies
View Related
Jun 17, 2014
I need to convert data from column IDS into separate rows, all other columns need to stay in tact. There are several distinct patterns for the IDS column, main identifiers are always starting with FILER or TEAL and the trailing numbers behind it have no more than 6 digits.
BEFORE MACRO
ID
AREA
TYPE
CLASS
QTY
IDS
1
COAL
TYPE9917312
CLASS881345
2
FILER756911**/**FILER123188 ^** FILER877119*118
[Code] ........
AFTER MACRO
ID
AREA
TYPE
CLASS
QTY
IDS
1
COAL
TYPE9917312
CLASS881345
2
FILER756911
[Code] ......
What the MACRO would look like? This is for Excel 2010.
View 3 Replies
View Related
Jul 17, 2013
I have five excel separate excel files containing values covering more than 500,000 rows each. I want to put then in a single excel workbook without tedious work of copy/paste to sheets of this workbook.
View 2 Replies
View Related
Oct 10, 2003
I have multiple worksheets spread across multiple Excel files (1 worksheet per file).
All files are stored in the same folder, and all worksheets have the same column headers and structure. I need a block of code that will combine all of these worksheets into a single worksheet in a master Excel file. That is, the code needs to:
1. Open the first Excel file.
2. Copy the first worksheet's contents into the first worksheet of the master file, beginning at the next empty row it finds.
3. Close the Excel file, and move on to the next file.
4. Repeat.
So in the end, ten worksheets residing on ten different Excel files will be combined into a single worksheet in a single file. No breaks are needed between them, instead, the last row of a worksheet would be followed by the first row of the next one immediately below it. No aggregate functions involved, no sums, nothing like that (which is why I don't think I can use the Consolidate function in Excel).
View 5 Replies
View Related
Jun 29, 2014
I need to combine data from multiple tabs into one tab. I can have up to 5 tabs with data that starts in column B. The number of rows will be different each time.
View 1 Replies
View Related
Jul 26, 2007
would anyone be able to write the code that will combine the data from all rows from all worksheets within a workbook. i've struggled with this one....
here is the deal:
all worksheets have the same columns and column headings but differnet amount of row counts. the width of the sheets is to Column "M" or "13" and there are no blank columns.
There is no need to have the columns headings repeat within the compiled worksheet.
the amount of worksheets will vary depending on when i run it so it will not be able to use specific naming conventions.
View 9 Replies
View Related
Mar 11, 2008
I have multiple sheets within a workbook, where the sheetnames will always be changing.
Inside of these worksheets there is data that will be different, the starting cell of the range is allways the same and the number of columns is constant. The number of rows changes. I need a code that will go to each worksheet, define and copy the range on that sheet and paste it onto a summary sheet, in order.
I would like to collect all the data and put it onto one sheet.
View 9 Replies
View Related
Sep 28, 2013
I have a time tracker that provides hours that employees clock in and out. It provides me with an excel document with all the employees time every two weeks as needed, however it does not total the hours from all previous spread sheets so that I can have a YTD (year to date) total of the employees hours worked and I need to be able to have this. Currently I am going through each and every spreadsheet and totalling them up. I have over 40 employees and this has become very time consuming to say the least.
View 1 Replies
View Related
Jun 16, 2014
I am trying to create a macro to gather a data range from multiple files placed a folder and combine them into a single worksheet which can be easily totaled. I've used some similar code I did for another project to gather the data. It starts by listing the file name and then the data set (About 40 cells) below the file title. However, the data sets from each spreadsheet are filling themselves into a single column one after the other, whereas I would like to have them populate one worksheet's data in each column.
[Code]......
SummaryWorkbook.xls
View 1 Replies
View Related
Mar 12, 2014
I have 2 separate excel sheets. Both contain different data about the same account. I need to combine the 2 into one spreadsheet without duplicating records. The accounts do have a unique account number that appears on both data sheets.
View 2 Replies
View Related
Jul 29, 2014
Is it possible to create a summary sheet that includes all the data from many sheets (in 1 workbook)?
I have a workbook with several sheets of data that I need to have combined into 1 sheet that adds all parts and adds the quantities.
Example:
Sheet 1:
201632130-10332EABRACKET ASSY,TOE KICK LIGHT
201632130-5011EASCREEN
201632130-50332EABRACKET
Sheet 2:
201632117-5092EASPLICE ANGLE
201632120-1034EASUPPORT ASSY.
201632121-5130EAFORMED PANEL
201632130-10332EABRACKET ASSY,TOE KICK LIGHT
Sheet 3:
201632112-5011EAHINGE
201632112-5032EASUPPORT
201632117-5092EASPLICE ANGLE
Notice how there are a couple parts that occur in more than 1 sheet. Can a summary sheet combine all those parts into one master list and total the quantities for each part?
View 14 Replies
View Related
Dec 2, 2008
what i want to do is 1 have a workbook with 3 worksheets. Sheet1 contains the columns:
Reference No. Line Item No. Amount Date
1 3 500 12/01
2 4 900 01/01
Sheet2:
Reference No. Line Item No. Quantity PersonInCharge
1 3 10 Kim
5 6 60 Noel
For sheet 3, what i want to happen is that when i run the VBA macro, it searches through both worksheets (Sheet1 and Sheet2), finding rows that have matching Reference No. AND Line Item No. and combine all of the columns (and values) for that particular row into another row in Sheet 3. So for the above data set, the resulting data in Sheet 3 would be:
Reference No. Line Item No. Amount Date Quanity PersonInCharge
1 3 500 12/01 10 Kim
As this is the only entry in both sheet1 and sheet2 where there is a matching reference and line item no.
View 9 Replies
View Related
Jun 5, 2013
Collapsing function: I want to select cells that I want merged, and have them COLLAPSE into the first cell selected calls
Combining function: OR Select the cells I want merged, and allow me to pick a destination cell for the result COMBINE
I would like to add this functionality to all my spreadsheets in the future.
Excel-Forum-Data Collapsing sample.xls
View 1 Replies
View Related
Aug 26, 2013
I have an Excel Spreadsheet (2007) that contains over 500,000 records that shows Electric meter usage per month over a 24 month period per meter. What I want to be able to do is to select a meter row per number and copy is to it's own worksheet. At the end - I want to be able to have a seperate worksheet per electric meter number - that I can create a graph. If I go through all 9000 meters and copy and paste into a different worksheet - it will take me weeks to do manually. How can I do this automatically?
View 1 Replies
View Related
Mar 24, 2012
I have a column of cells with Customer info and address in each row, that I need to move into multiple columns. ie Cust name, acct #,address, city,state, zip the problem is ALL of the info for each customer is in ONE cell.To be clear, cell B1 has complete name address etc for one customer, B2 has the info for another, B3... on and on. To complicate matters as in the example, there is not a pattern in the lines. the first example shows the info beginning on the 2nd line of the cell, but the 2nd example shows info in the first line. I have tried the text to column fixed width. Didn't work because names and addresses are of varying lengths. Then I tried delimited, but there isn't a common separation between different data. I am using excel 2007. FYI I did go through many many threads and found some that were close to my problem but not close enough to work.
"
JOES TOWING SERVICE [0123451]
123 STREET
CALEDONIA FL 12345
"
"BUBBA / SHOP
ACCURATE AUTO SUPPLY INC [0234567]
21234 HYDRAULIC DR
LOCKWOOD OR 45678
"
View 7 Replies
View Related
Sep 13, 2009
I have a set of related variables that are split over multiple worksheets, and I need to be able to take specific information, duplicate certain values and produce an output sheet for use in a separate piece of software.
The variables are:
Position Number (Sheet 1)
Position Title (Sheets 1 and 2)
Position Requirement (Sheet 2)
Requirement Importance (Sheet 2)
The output sheet requires a list of all the requirements for each position number, which means the position number itself needs duplicating (in new rows) X number of times, where X is the number of requirements assigned. The appropriate requirements are then to be pasted in next to each position number (and the requirements can be found by comparing position number to title, and from title to requirements).
Normally, I’d be able to do this using lookups and so forth, but my problem arises when I have multiple position numbers with the same related title (in the attached example, there are three plumbers with unique position numbers). I can’t figure out how to say to Excel “a plumber has five requirements, and there are three plumbers, so duplicate each position number for each plumber five times, then insert the appropriate qualifications (and their associated importance values) next to the position numbers”.
View 4 Replies
View Related
Jun 2, 2014
Is it possible to create a formula using a Data Validation List where it will add a new entry to the existing entries in a cell?
For example: I have a data validation list with the names of Pete, Chris, Bruce, Carly, Megan, and Becky. With the normal data validation set I can select one entry and it will be output into the designated cell. If I select Bruce then Bruce with be placed in the cell. Is it possible to set it up so that each time I click on data validation it will add an entry to the already existing entry? E.g. I have already selected Bruce then I decide to add Becky, I want the output cell to show both Bruce and Becky.
I know I can do this with a formula that will place all the results from different cells into a single cell, but I would then have to create multiple data validation entries of which I would rather avoid if possible. Not to mention I don't remember how to do this formula anyway......
View 14 Replies
View Related
