Excel 2010 :: Camera Function - Take Picture Of Graph And Pasting To Alternative Sheet?
May 21, 2014
Excel 2010 and the camera function.
I have been using it to take a picture of a graph, pasting to an alternative sheet within the same workbook, and renaming the picture by a defined name. S by selecting the names from a drop down list the picture will select various different sized graphs defined within my drop down.
What I am experiencing is when I initially do this the pic works great and resizes automatically with each selection, however the next day some of the pictures resize and some do not.
Is this a glitch within excel or am I missing a setting which will resolve this?
View 1 Replies
ADVERTISEMENT
Jun 18, 2013
In Excel 2010, I used the camera tool to take a snapshot of a selction of cells. How do I save the snapshot only as a JPG or GIF file?
I know that there are programs outside of Excel that can take snapshots or print screens, but I need to accomplish it using the camera tool so the snapshot is the exact selection everytime. Is the excel snapshot temporarily saved somewhere on my computer where I can access it?
View 1 Replies
View Related
Mar 19, 2012
In Excel 2010, is there any way to paste a picture into a small picture/diagram box, and upon double clicking the picture it would explode to a larger size? And I guess double clicking it again would make it return to its original (smaller) size. I would be pasting several pictures into several different picture/diagram boxes and would need this to be a relative reference so that upon selection it explodes the appropriate picture?
View 1 Replies
View Related
Mar 31, 2014
I have a sheet made into a form with some check boxes included. If I select all the relevant columns, create a new sheet, and paste into cell A1 - all of the information carries over just fine. You can still select cells and check the boxes in the new sheet.
However, when I record this action as a macro, using the macro produces a picture of the selected columns instead of actually copy/pasting the information. I can't click on the cells or check boxes. I can only move the picture around within the new sheet.
View 7 Replies
View Related
Jun 20, 2008
I am a complete newbie with the camera tool. Is there any way to make the camera tool dynamic so that the cells the tool is referencing can change upon the click of a button or some other form of switch? I am creating my first dashboard and this is the last step for my report to be completely dynamic.
-----------------------------------------------------------------------
Never mind, I apologize i just figured this one out...
Create a user defined formulaIn the UDF Create an if statementThe if statement's condition is the logistics in the shift mechanismThe value if true is the first group of cells you want in the snap shotThe value if false is the second group of cells you want in the snap shot, The range you want to toggle betweenRename the cell reference of any snap shot you have taken with the UDF name. In my example my UDF is "Dude" so when you select the camera tool it shows =Dude as the cell referenceReference a scroll bar to the conditional cell you selected in the if statement or choose statement. This is the shift mechanism
If you want to toggle between more than 2 sets of data use =Choose instead of =if
View 3 Replies
View Related
Jan 26, 2012
I know you can't use the SUMIFS function in 2003 but give alternative in 2003
=SUMIFS($D$3:$D$30000,$C$3:$C$30000,"IOP",$E$3:$E$30000,">=01/03/2011",,"
View 3 Replies
View Related
Oct 16, 2013
I'm trying to get the Median (and min/max later) of certain values on a different sheet. For example, I'm operating in one sheet and pulling the values from the sheet "Form Responses". I want a median for numbers when the values in column B are "Aransas" and the values in column D are Yes. The values are in Column F. My formula is:
=MEDIAN(IF('Form Responses'!B:B="Aransas",IF('Form Responses'!D:D="Yes",'Form Responses'!F:F,""),""))
It's giving me the median for ALL of the numbers in F and I can't figure out why.
Following that, I'll want a median for all the numbers in F when column B value is "Aransas" (in other words, dropping the Column D condition).
Excel 2010, Windows 7
View 1 Replies
View Related
Jan 23, 2012
I have a not too big catalog in Excel format (2010). Each row has a picture. Now, I need to generate sales report. Some items do not sell. For report purpose, I want to delete those rows along with the pictures. Possible to do so? I did an Internet search and found that drawing objects are not bonded to a row or a cell. Seems to me I cannot selectively delete picture in a particular row. True?
View 1 Replies
View Related
Feb 5, 2013
I'm using a macro to insert a photo in to a Excel 2010 workbook. If the photo moves location it will no longer display the photo in the document as I belive the photo is being referenced instead of embedded.
If you then use the "Change Picture" icon the photo embeds but how do I get my macro to embed the photo.
Sub InsertPhoto(PictNo)
Dim SH As Worksheet
Dim Rng As Range
Dim MyPic As Picture
Dim sPath As String
Dim PicH As Single
[Code] ......
View 1 Replies
View Related
Sep 29, 2011
I have a simple problem. I have many worksheets which all contain data in the first four columns. I want to be able to create a chart (a scatter chart) in the first worksheet which plots the data on that worksheet and then format it how I want it to look. This I can do.
Next, I want to copy and paste that graph into all the other worksheets, but have the pasted graphs display the data in that worksheet.
As it stands, in Excel 2010, all the pasted graphs keep showing the data in the original worksheet irrespective of which worksheet I now have them in. This seems to be different to older versions of Excel and is very annoying and has to be changed by hand which is very time consuming.
How can I make charts that don't have the worksheet name in the cell reference, or how can I paste a chart so that is updates the references to the same row and column but in the new worksheet?
I know I could copy and paste the entire worksheet and then manually copy the new data into that copy of the worksheet - but that is not a real solution to this problem.
View 2 Replies
View Related
Jul 14, 2014
I need to insert a picture on a Excel 2010 worksheet.
The worksheet contains a variable number of columns, and the column width is also variable.
The picture needs to be aligned such that the right edge of the picture is in line with the right side of the last used column.
This is so that when the worksheet is converted to a PDF document the picture (company logo) appears on the top right hand side of the page.
I can find the cell reference for the last column, and I can move the picture around the page. But I'm not sure how to find the position of the last column on the page?
I've got this far:
'copy picture and resize and position
Sheets("Output File").Select
ActiveSheet.Shapes.Range(Array("Picture 1")).Select
Sheets("External data sheet").Select
Cells(1, 10).Select ' I can make this be relative to the last column on the WS
ActiveSheet.Paste
Selection.ShapeRange.Height = 50
Selection.ShapeRange.IncrementLeft 0 'put the picture in a position relative to the cell selected
View 5 Replies
View Related
May 9, 2013
I have some text out of note pad in the following format
"cat" "dog" "bird" "turtle"
"cat" "dog" "bird" "turtle"
There is several lines like this. I need to copy it out of notepad and paste it into excel where every word in quotes is in its own cell. Right now if I paste it everything goes into cell A1.
I am using excel 2010..
View 4 Replies
View Related
Nov 8, 2013
I recently received an .xls book which I then saved as .xlsx (I'm using 2010). There are just under 8,000 rows and 20 columns. File Size 1MB.
The only formulas in the sheet are the ones in a column which I inserted and copied down for all 8,000 rows. Nothing too complicated: no arrays or anything. The sheet calculates fine.
I am simply trying to copy and paste these formulas as values (into the same cells), though at every attempt Excel crashes. I tried on smaller sets of the column and just got it to work for a few hundred rows, though it struggles with any more than that.
I opened a different workbook of mine, and tried the same operation on twice as many cells containing complicated, lengthy array formulas and the action completed instantly.
There is no Conditional Formatting in the book, no code, no 'last cell' issue, no Named Ranges, no external links.
I have even copied the data to a new workbook, then copied the text of just one of the formulas over into this book, added an equals sign, copied down and recalculated, then tried to paste as values again. Still crashes.
Formula:
=IF(AND(N3>1,ROWS($1:1)<>MATCH(M3,$M$3:$M$7979,0)),"Exact Duplicate","")
is far more resource-hungry than I thought, though if that were the case, wouldn't the issue be during calculation (which, as I said, is fine) and not during a paste attempt? No, it can't be this.
View 1 Replies
View Related
Dec 12, 2012
I have a set of data (numbers) I want to include in a bar chart. The numbers appear fine in the table. When I create the chart and sets the data (the cells excel goes looking in to create the chart), the values in the cells are divided by 10 for some reason I can't understand.
I tried to create a new file and a new chart, and the issue does not repeat.
I do not know where to look in that specific file to prevent Excel from dividing every number by 10 when I create a chart.
View 2 Replies
View Related
Jul 19, 2014
I'm using Excel 2010. Is there any solution which cover requirements given below.
1) I've converted a range in to table format (using Format as Table)
2) Need to Prevent pasting on data validation cell.
3) Need to Prevent change in cell format after pasting data (other than data validation cells as mentioned above) from same workbook or other workbook
4) Need to insert row in the table as per requirement.
View 3 Replies
View Related
Feb 23, 2012
I have been trying to chart temperature differences over 10 day's time for six cities using a line graph. For some reason, the lines are all clustered at the bottom of my graph, with values of 0. My spreadsheet is accurate, without any blank cells. I'm using Excel 2010.
View 1 Replies
View Related
Jun 26, 2014
I have been given a task to create a line graph who has 10 categories and each category has 5 different values. I need to plot a line graph, so that those 10 categories should appear on the Y-axis instead of X-axis.
I am using Excel 2010.
View 8 Replies
View Related
Mar 2, 2014
I'd like to create a simple graph exactly like the one on the picture, but for the life of mehow to do this on Excel 2010.This is the data I have:
Seperation First target Second target
0 59.00% 0.00%
2 64.28% 40.62%
4 62.68% 48.99%
6 60.81% 65.83%
8 61.82% 70.21%
View 6 Replies
View Related
Jan 7, 2014
I am in the process of setting up some graphs. The graphs will show the last 6 months of data so they move as each month is goes. I saw a slick way of doing this using the count function but this did not quite fulfill my needs. What I was looking for is to be able to input the start month in a cell. The cell would be part of the function within the formula. I created a simplified version of the spreadsheet below.
Spreadsheet.jpg
Then I created my names using the ctrl-F3
Names.jpg
I then created the graph I wanted and wanted to use the formula =SERIES(Sheet1!$B$3,!chtCat,!chtIssuesReported,1). This kept getting an error indicated nothing really. It basically says there is something wrong with my Series function. I have a working version of a similiar worksheet I have been basing my entries on. They look almost identical but mine is failing. I also created a new file and tried this and it still fails. I can run the formula evaluator within Excel 2010 against the !chtCat and !chtIssuesReported names and they both return the correct value (which equals areas on the spreadsheet). I have also tried to enter the spreadsheet name and a tab in front of the names to get them to work and still get an error. Basicall I am trying to create the graph below (this grpah is using the hard coded locations)
Graph.jpg
View 2 Replies
View Related
Dec 8, 2011
did in [URL] but my issue is complicated by not knowing what cell I need to move the graph to.
I am using Excel 2010 and I am a realitive novice at writing VBA code.
In My spreadsheet, I have a list of properties and some related cost info. From week to week, the number of properties varies. Some days I will have 6 properties and others I could have 100. Because of this, I need to make all of my references relative to other cells. I am having trouble repositioning the graphs that I have created from the data to be 2 cells below the label I have created for the graph (which is a merged cell covering Columns B:I on a row 3 rows below the last property in the report.
So far, I have:
Dim r1 As Range, r2 As Range, GraphRange As Range
Cells(2, 1).Select
Selection.End(xlDown).Select
[Code]....
View 1 Replies
View Related
Mar 20, 2014
Excel 2010 - I need to create a graph that shows a week's use of a sportsground showing what sports were played, on which days and between which times. I thought I could show the times on the vertical axis, days on the horizontal axis and then the sports played in those times, however I'm unsure as to how to get the graph to recognise the times.
I've attached an example of some data and how I'd like to see it, I'm just not sure how I can do this using the chart set up!
Attached File : Graphs.xlsx
View 10 Replies
View Related
Mar 8, 2007
I would like a macro that would analyze a range (H15:GI15) to see if they contain FH, FS, FB, FR, or FC and if they do, copy the related picture associated with the 5 variables and paste it in the cell.
I did this code and it worked, but the code is very long. Another problem I have is there needs to be a way to delete the existing pictures before the code runs too. Because the cells may change and the button that runs the macro would be labeled "update" or something to that effect. I don't really need it to run everytime the cell is updated, just when the "update" button is pushed.
View 9 Replies
View Related
Aug 28, 2012
I work with a team of users that are continually publishing reports in Word that contain charts and graphs copy and pasted from Excel into Word 2010.
We have a custom script that leverages a PDF engine to automatically convert .doc files to .PDF files that we distribute electronically to our clients. This all works great, but only if all my users select 'paste special' and Enhanced Metafile Format when adding their excel charts into our reports. Most of these people aren't tech savvy, and I'm havin ga hell of a time getting them to follow this workflow and am hoping there's a way in Office 2010 to select the default paste from excel into word when the content is a chart.
It seems like the default paste from excel is an embedded chart/graph that you can then further manipulate each component of the chart in Word; the default doesnt' paste an actual image. I am assuming the pdf renderer is using a lower resolution .PNG version of the image and when these are scaled for print and or pdf, they look like crap.
Is htere anyway I can automatically change the default paste format for the chart from excel into word to be an EMF/EMV (enhanced metafile?) Either thorugh the registry or some other saveable setting?
View 1 Replies
View Related
Feb 15, 2010
i have some numbers as data, i want to find the function that generate thiese numbers and also i want to view the chart of it, its kind of sine wave graph.
View 9 Replies
View Related
May 12, 2014
I am using the following code to paste an excel generated chart into ppt. How do I adapt it such that it only pastes the charts from sheet2 and not the entire workbook?
[Code] .....
View 11 Replies
View Related
Apr 8, 2014
I'm having trouble using the worksheet copy command in a VBA subroutine. I have the following line in my code:
[Code] ........
When I step through my code and execute this line, the sheet is copied as expected and put in the correct place, but then instead of the next line of code being highlighted, the pointer jumps to the first line of a function (in a different module) in my code.
View 14 Replies
View Related
Feb 7, 2013
Excel 2003
Windows Vista
I keep getting this error: (at the line highlighted in green)
Runtime error '1004'
PasteSpecial method of range class failed
**** Open workbooks to transfer temporary data
[Code]....
View 2 Replies
View Related
Nov 10, 2012
i am totally new in excel and i am using excel 2007, my question is : how can i create an object in an excel sheet, so that when the mouse cursor move to it, it pops up anohter image?
View 4 Replies
View Related
Nov 18, 2007
I want to have a sample file in excel which store picture of student in comment, I did this, but when I want to insert picture the file dialog appears, and if I click cancel, then there is an error, why? If some one optimise the code it would be very nice
View 6 Replies
View Related
Nov 27, 2012
I have place a camera-picture of a table on the right side of a chart. On the screen it looks great! (See below - with some redaction)
Problem Example.png
.... but when I print it the table expands off of the side of the chart. Scale is 100%, zoom is 100%, Excel 2010 (See below - with some redaction). Whether or not I have a print area does not seem to make a different in the problem. Also, it appears that this happens with any shape I put in that place, it's not specific to the camera tool.
Problem Example_Print Preview.png
View 8 Replies
View Related
