Excel 2010 :: Function To Create PDF
Jan 24, 2014
The situation I have on my hands is over 200 users, were the majority can't use Excel's built in function to create PDF's.
Yes, I've tried to teach them, but I'm probably not a good teacher.
So, I've resorted to create a button at the top of the worksheet, that says "Create PDF". I thought this was gonna be very easy to program, but alas.
Is there a way to start the built-in Excel dialog that happens when you click "Create PDF/XPS" in "Save & Send"?
View 4 Replies
ADVERTISEMENT
Apr 8, 2014
I'm having trouble using the worksheet copy command in a VBA subroutine. I have the following line in my code:
[Code] ........
When I step through my code and execute this line, the sheet is copied as expected and put in the correct place, but then instead of the next line of code being highlighted, the pointer jumps to the first line of a function (in a different module) in my code.
View 14 Replies
View Related
Dec 26, 2012
how do i make a bar chart on Excel! 2010
Basically i have these figures
Male : 21
Female : 18
I want to make a bar chart, When i use Excel and try to make it - i get a chart which shows the right column height but the Male and Female bars are BOTH IN 1 Colour. How do i make it so that male bar is blue and female is pink.
View 3 Replies
View Related
Jan 6, 2014
I am not too sure what this is called but I am using Excel 2010 and need particular document that I use repeatedly. Basically, if a particular cell in the document does not contain a phrase then I want Excel to automatically change the text in that cell to bold and red and 2 other cells in Excel to bold and red as well. For more information, the cell is 19–20 and K–O and the phrase in the cell is "No Inconsistency".
So if "No Inconsistency" is not found in that cell then it automatically changes the text in that cell to bold and red, and it also changes two other cells that are found in that document to bold and red as well. The coordinates of those two other cells are 19 with H–J, and the other one is 17 with H.
View 2 Replies
View Related
Mar 19, 2013
Im looking to create a bar chart in Excel 2010 where the totalnumber of widgets is 33 and the number produced so far is 11. The bar chart would be a single bar that represents the percentage complete (33%) with the chart maximum range being 100% which would represent the number 38.
Ive included a mock up example of what the data and chart would look like
View 3 Replies
View Related
Feb 7, 2013
I'm trying to create a userform with a progress bar. The progress bar does NOT need to be 'real' and accurate, but simply act as a timer to illustrate to the user that the program is running some quick calcs.. Again, basic progress bar, with about about a 4 second completion time..
(using excel 2010 VB)
View 6 Replies
View Related
Nov 18, 2013
Code:
Date Jan-14..........Jun-14............Dec-14...........Jan-15..........Jun-15............Dec-15
Measure1
Measure2
Measure3
Code:
Date 2014 2015 2016
Measure1
Measure2
Measure3
I have two tables, examples above In the first table, Jan-14 is a dropdown value that updates all the values to the right by a month increment when a specific date is selected
I then have some code that populates the cells which have 2014,2015,2016 in them.
What I need to do next is populate the 2nd table with values based on the date ranges in the above table.
View 4 Replies
View Related
Nov 26, 2013
I'm trying to create a pivot in vba. I can record what I have done but if I run that recorded code, it returns an error "Invalid call procedure or argument".
Code:
ActiveSheet.PivotTableWizard SourceType:=xlDatabase, _
SourceData:=Sheets("Raw Data").Range("A1:AG" & Z), _
TableDestination:=Range("A3"), _
[Code].....
View 1 Replies
View Related
Jan 7, 2014
I have a workbook which needs a new sheet for each day of the month.I normally just create and re-name each sheet with the date...is there a simpler way where i can create the new sheet with a date for each month instead of doing indiviually?
Excel 2010
View 9 Replies
View Related
Feb 12, 2014
I have 6 columns. The 5th and 6th columns are the most important. The 5th contains a figure and the 6th contains a type.
Bascially I am trying to do a basic chart showing the following 2 things. A. Do a percentage chart of column 6 (service) but not of percentage of hoem many lines the product is in. Not based on percentage of how many times Apples are shown compared to other products. I need it to add up everything, then do a percentage of total amounts of oranges and total of for Apples from the figures on column 5. Also, if possible, the pie chart will even show teh actual total figure per product in each (or next to) each pie chart slice.
know the easiest way to do this (step by step) in Excel 2010 and then I can perhaps write a macro for the future?
View 1 Replies
View Related
Apr 24, 2014
I need to create 3 or 4 detailed reports from an excel 2010 worksheet.
My worksheet contains data including date, invoice number, company , consultant, days, dollars. There are approximately 100 records in the worksheet.
Requirement 1 :I want to use excel 2010 to automatically generate a series of reports broken down by consultant showing date, invoice number, company, and consultant with totals for days and dollars, when all the records for consultant 1 are listed, then I want to show consultant 2.
Same for any other consultants with a grand total at the end.
My understanding is that excel 2010 makes this process very simple .
View 3 Replies
View Related
Mar 8, 2014
I am trying to create a database that contains data taken from several work books that i have saved in one folder on my hard drive. These workbooks contain quite a lot ** data, but i only want to extract the data i want to instead ** having to extract it all? these works books are used by several other people as well, so i want it to be able to update as data changes.
I was thinking about using data links, but that only seems to extract all the data instead ** just what i want?
View 1 Replies
View Related
Mar 24, 2014
As you can see in the attached file, I have a column of classes , a columns of related revenues and the total for each class. I have to create a column, next to these, where I can create the percentage with respect the sum of each class (as you can see by the formula). My problem is I am not able to say vba to find the totals and to create the percentage just with the revenues related to that total.
p.s: I have to work on excel2010.
View 3 Replies
View Related
Mar 29, 2014
I need to create a separate PDF file for each Excel Worksheet, each worksheet has a different name.
I am using Excel 2010
View 1 Replies
View Related
Jan 21, 2012
I get a "Object variable not set" error when creating a Pivot Table from a cache. I want the destination to be in a different sheet in the workbook. I set the new worksheet as: Set WSD = Worksheets.Add and I reference WSD.Cells(2,FinalCol +2) in the destination field of the CreatePivotTable method. I use the code from the Excel 2010 VBA book I got last week.
View 9 Replies
View Related
Sep 21, 2012
Creating a pop up message when a cell value is over 100%.
I have in cell T21 "=sum(t7:T21) but I'd like to give a pop up message when this cell value is over 100%.
Excel 2010
windows XP
View 2 Replies
View Related
Apr 5, 2014
I am working on a schedule worksheet, the days are the columns and the staff member names go down the rows. I want to create a new cell value based on a condition on each row. I have been successful working with one row but how to efficiently do the same for each row.? I'm working with Excel 2010.
View 9 Replies
View Related
Jan 20, 2012
Using Excel 2010, I am trying to create a macro to insert INDEX and MATCH formulas on a sheet that reference Tables on the same sheet.
The formula works fine when entered in a cell where I can point to the Table. Now I need to put the formula in a macro where it will automatically reference the first Table on the sheet.
Here is an example of the formula:
Code:
=INDEX(Table1891034445678912822253536[#All],
MATCH($I35,Table1891034445678912822253536[L/I],0)+1,
MATCH(L$34,Table1891034445678912822253536[#Headers],0))
Just look at that Table name!!
The original file has multiple sheets and multiple Tables on each sheet. No naming convension was used in naming the sheets or Tables.
Can I cycle through all the Tables on a sheet and rename each of them? For example, find the first Table on the sheet closest to cell A1 and rename it Table 1, find the next Table and rename it Table 2, etc.
Is there a way to reference Tables based on an index (similar to sheets)? Is there a Table(1) and Table(2) referencing system? Is it on a per sheet basis or across the entire workbook? That is, can there be more than one Table(1) in a file?
Can I start in cell A1 and find the first instance of a Table and return the name or index of that Table?
View 2 Replies
View Related
Feb 2, 2013
There was an option in excel 2007 in the pivot wizard to use an existing pivot table report as the source for a new pivot. I cannot find this in Excel 2010.
View 2 Replies
View Related
Dec 21, 2011
Having problems with the code below on a 2010 Excel spreadsheet. The function flags me at first line and highlights Mid. I get a "compile error, cannot find project or library". I'm trying to set GetSheetName = m_sSheet but the GetSheetName function is not declared as returning any type.
Code:
Function GetSheetName(ByVal m_sFormula As String) As String
Dim m_sSheet As String
m_sSheet = Mid(m_sFormula, 2, InStr(m_sFormula, "!") - 2)
If InStr(m_sSheet, "'") Then
m_sSheet = Mid(m_sSheet, 2, Len(m_sSheet) - 2)
End If
GetSheetName = m_sSheet
End Function
View 1 Replies
View Related
Jan 21, 2014
Excel 2010. There is a limit to the usability of the
=INDEX($A$1:$A$1000,MATCH(0,COUNTIF($A$1:$A$1000,"<"&$A$1:$A$1000),0))
method. It seems like the limitation is in the Countif function going over 1000 (or some other size limit)
I have a list of ~1500 rows, of that there are approximately 55 unique items. Doing the unique array works correctly up until item ~40, upon which it fails by returning the 1st item only (for the rest).
Trying to debug, and pulling out the Match section, it functions up until 976 (that is
MATCH(0,COUNTIF($N$1:$N40,$C$3:$C$1500),0)
returns 976) anything after returns just 1 (1st item).
It seems to be a limitation on the text string size that COUNTIF can handle.
View 7 Replies
View Related
Dec 16, 2011
So I'm trying to create a balance ledger to track my transactions at different locations.
This is basically what I have:
C4 = numerical value for site A
D4 = balance for site A
E4 = numerical value for site B
F4 = balance for site B
G4 = total balance of both sites
Values for C4 and E4 are manually entered.
D4: =IF(OR(ISBLANK(D3), ISBLANK(C4)), "", D3+C4)
F4: =IF(OR(ISBLANK(F3), ISBLANK(E4)), "", F3+E4)
G4: =IF(AND(ISBLANK(D4), ISBLANK(F4)), "", D4+F4)
I have these formulas auto-filled to the bottom of the sheet of each column. The problem I'm having is that with this setup, the return on the G column is giving me
#VALUE!
for all rows that do not have any values entered yet. Is there any way to fix the formula in column G so that it reads the value of the cell instead of the formula in the targeted cell?
I am using Office 2010 on Windows 7.
View 2 Replies
View Related
Jul 28, 2013
I have a Excel 2010 file that I want to activate the file and create a folder in it named customUI.
the steps to achieve this?
View 7 Replies
View Related
Jul 22, 2012
I'm currently working on my masters dissertation and am using excel 2010.
Basically, I'm trying to generate a list of say, 1000 numbers within a range. I can already do this using the rand() function. However, I need excel to take each random number, apply it into a formula, and then list the answers in a seperate location. This would be easy to do if there was one simple function (which i could just insert into any adjacent cell). The problem is that each random number value is input into a table. The table, which has about 10 columns and 200+ rows, gives one final answer.
I'm sure there has to be a faster way than creating 1000 tables for each random number generated.
Let's say I have a list of 1000 random numbers in sheet 1. the function table is in sheet 2 and produces the answer in the same sheet, in a single cell. I'd like excel to use each random number generated, input it into the function table, attain the answer from the table, and list it in the cell next to the random number.
View 2 Replies
View Related
Dec 28, 2011
Im trying to write a code in vba in Excel 2010 that would incorporate the vlookup function in excel.
My Data Looks like this:
List 1Weight 1List 2Weight 2List 3Weight 3List 4Weight 4a2.00%j20.00%a14.00%p2.00%b4.00%k32.00%d2.00%y3.00%
c7.50%e10.00%g14.00%u6.00%d8.00%d15.00%h20.00%h7.00%e9.00%q13.00%y45.00%f8.00%f20.00%r5.00%q5.00%
d9.00%g35.00%n5.00%t10.00%h10.00%r14.00%i4.50%w15.00%b0.18Z0.04S0.04Total100.00%Total100.00%Total100.00%100.00%
Where I have X number of Lists, each composed of two columns. The 1st column has the name of each item in each list, and the 2nd column has the value for that item.
What I'd like to do is create a function that would let me choose two lists, and tell me the amount of items in List X and what their values are in List Y, and then total them. Also, I would like it to work the opposite way, and tell me the amount of items in List Y and what their values are in List X, and then total them.
So for example, If I wanted to look at lists 1 and 2, the function would calculate that for List 1, Items D & E are found in List 2 and have a total value of 25%. For List 2, Items D&E are found in List 1 and have a total value of 17%. For all items not in both lists, it would return values of 0.
The code I came up with so far looks like this:
Function AK_Overlap_Go(x, y)
Dim Temp(1 To 2, 2 To 1)
Dim x As Integer
[Code]...
One of the problems I'm having is that the lists contain a different # of items, and so I think I need to loop the vlookup for each row. However, I'm not sure how to do that and get the cumulative values for each list.
View 3 Replies
View Related
Apr 18, 2012
The problem is that whenever I have any browser open, IE, Chrome, Firefox, etc... the Cut & Paste, Copy & Paste function does not work correctly in Excel 2010.
When I Cut or Copy the blinking marquee around my selection briefly appears and then disappears. When I try to paste, I only have two options under the paste special function: Unicode Text and Text, same with cut and paste, however, the text doesn't actually cut, it only copies.
As soon as I close down any of the mentioned browsers, the full functionality of the cut/copy & paste functions are restored, no need to restart excel.
I need to have open a browser most of the time for work as our system is web based, so closing and re-opening is more than just an annoyance.
View 2 Replies
View Related
Jul 22, 2012
I'm currently working on my masters dissertation and am using excel 2010.
Basically, I'm trying to generate a list of say, 1000 numbers within a range. I can already do this using the rand() function. However, I need excel to take each random number, apply it into a formula, and then list the answers in a seperate location. This would be easy to do if there was one simple function (which i could just insert into any adjacent cell). The problem is that each random number value is input into a table. The table, which has about 10 columns and 200+ rows, gives one final answer.
I'm sure there has to be a faster way than creating 1000 tables for each random number generated.
Let's say I have a list of 1000 random numbers in sheet 1. the function table is in sheet 2 and produces the answer in the same sheet, in a single cell. I'd like excel to use each random number generated, input it into the function table, attain the answer from the table, and list it in the cell next to the random number.
View 1 Replies
View Related
Sep 16, 2012
Using Excel 2010 Pro.
I have a formula to create a string to create a lable for a Trial Balance report
=LEFT(I5&" "&REPT(".",95),101)
But the decimal portion of the string is distracting. I would like to make it a grey instaed of a black so that the text portion of the label "pops".
I don't believe I can do it with conditional formatting and I do not want to do it manually.I was thinking some kind of function or UDF like:
=LEFT(I5&" "&RGB(REPT(".",95),(191,191,191)),101)
View 3 Replies
View Related
Jan 4, 2014
I am working with Excel 2010 and I have a problem that I can't seem to figure out. I am trying to find the first nonzero cell and begin an average function from that cell and down through 29 rows (a total of 30 rows).
Sub average()
FinalRow = Cells(Rows.Count, 3).End(xlUp).Row
For I = 3 To FinalRow
If Cells(I,3).Value 0 Then
'I use the above to identify the first nonzero cell
ActiveCell.FormulaR1C1 = "average(........)
This is where I am stuck, I don't know how to code the first nonzero (which can change with different data) cell and average rows below it.
View 7 Replies
View Related
Jul 17, 2014
I think I need some version of a lookup for match function. Here is essentially what I need: I have a column of data points. I need to output every position at which the data point changes to a different value (going from top to bottom). See below for an example.
Here is some sample data (with column headers)
Position
Data Pt
1
-7.5
2
-8.0
[Code] .......
Here is the result I need (I want to put a consistent formula into the second column below that returns the results shown in the second column below):
split 1 position
2
split 2 position
4
[Code] ........
Is what I am describing possible? Because I am inserting this into a template, I ideally need to do this outside of any sort of VBA work.
View 2 Replies
View Related
