Excel 2010 :: How To Make Unhidden Sheet As Active
Aug 17, 2012
I managed to make hidden sheets unhidden. However, after doing so, the first sheet stays active. How can I correct this? EXCEL 2010.
Module4:
Code:
Function Hide_Show(MySheets)
ActiveSheet.Unprotect Password:="****"
Application.ScreenUpdating = False
For Each ws In Sheets
X = Application.Match(ws.Name, MySheets, 0)
If Not IsError(X) Then
[Code] .....
Sheet WORKSPACE:
Code:
[Private Sub Open_BusinessDone_Click()
MySheets = Array("WORKSPACE", "BUSINESS_DONE")
Call Hide_Show(MySheets)
End Sub
View 7 Replies
ADVERTISEMENT
Mar 24, 2013
Is there a code I can put on commandbutton to show Print Preview on active sheet in excel 2010 ?
View 3 Replies
View Related
Jan 6, 2013
Excel 2010ABCDEFGH1DATESAMPLECUSTOMERSHADEREF #ARTICLE"BRAND"REQD2REQ # CONES302.01.139118CNS-BACLAS-40463-2TEX-60-2000M PP(29/3)SILVER FALCON2402.01.139118CNS-BACLAS-40463-2TEX-30-3000M PP(40/2)SILVER FALCON2502.01.139118CNS-BACLAS-40463-2TEX-27-3000M
[Code] ......
I have like above 12 sheets (JAN-12 to DEC-12). I want to make a summary in new sheet base on bellow condition.
All the 12 sheets , data need to copy to new sheet & same time if Column "C,D & F" values are repeating in same sheet or any other sheets then that repeating rows column " H" values should summarized (only one entry should display in summary).
View 4 Replies
View Related
Aug 14, 2012
How can I test in my VBA wether a named range (with a scope of sheet) exists on the active sheet?
Code:
If "EmployeeEmail" exists on the active sheet Then,
xxxx
Else
yyyy
End If
Using Excel 2010.
View 7 Replies
View Related
Apr 2, 2014
I would like to run a calculation based on selected active range in sheet. I tried several methods and cannot make it work.
View 2 Replies
View Related
Mar 21, 2013
I have a problem concerning sending an active word document via mail. I have a worksheet with various information in it, that I am exporting to a word document. I then want to send the word document via email. I want to do this without saving the changes in the word document. I am working with excel 2010. I have posted some of my code below.
VB:
Sub letter()
Dim myWord As New Word.Application
Dim adr As Variant
[Code]....
I get the following errormessage: "Compile error. Wrong number of arguments or invalid property assignment"
View 2 Replies
View Related
Oct 7, 2011
I am using excel 2010.
I have a macro-based employee leave system that works by couting the number of days shaded with a certain colour and thus calculating leave days taken, remaining and entitled... I have a single workbook with multiple sheets for different employees.
However, when I update by using ctrl alt f9, it updates all the other worksheets (ignoring their shading) with the values of the active worksheet! So if I update Peter, who has taken 14 days so far, it will update Liam's sheet too, with 14 days, ignoring Liam's actual shaded days...
How can I update each sheet individually, without compromising the other sheets?
Excel is not responding to Shift - F9.
View 3 Replies
View Related
May 29, 2013
I've got an old Excel sheet with Stephen Bullen's function for returning the active filter criteria (Rob on Programming: Excel: Displaying Autofilter Criteria). My status sheet may be filtered in multiple ways, and when the user is happy with the filter selections, she can create a powerpoint file with a graph and a summary of the filtered table. As we are using Excel 2010, users are very likely to select more than two filters.
Example: Range A1:E100 has the following headers: Field, Installation, Project,Type, Phase.
The controller wants to filter on:
Field equals north or south or west Phase equals completed
The manager for Field South wants to filter on:
Field equals southType equals maintenance or repair or modification Installation begins with Zeus.
As the filters are not shown when I copy the table to powerpoint, I would like to create a summary of the user's active filters that is pasted into a sheet (for subsequent copying to powerpoint). For the users in the example above, that table would look something like this:
Controller:
Active filters
Field: north, south, west
Phase: completed
Manager, Field South:
Active filters
Field: south
Type: maintenance, repair, modification
Installation: Zeus*
I've looked at various functions intended to take Stephen Bullen's code into Excel 2010's multiple criteria world (e.g. this: User Defined Function to Display AutoFilter Criteria for More Than Two Criteria in Excel 2007 / Excel 2010), but I have not been able to convert it to a functioning macro.
Any code that could be used for this sort of task, or any tips for relevant code?
View 2 Replies
View Related
Jun 26, 2014
Excel 2010.I'm using this code to print user's accessing a file:
[Code] .....
However as someone could just delete the printed user log in the Sheet2, and also you can't use this if you protect the sheet, which defeats the purpose.
I want it to print the log into a separate file. Can I add in the file path/name to this code somewhere?
View 1 Replies
View Related
Aug 16, 2013
I have workbook I would like to auto save to PDF copy file in different location every time the original file is save maybe some VBA code
View 4 Replies
View Related
Aug 16, 2013
I have workbook I would like to auto save to PDF copy file in different location every time the original file is save maybe some VGA code is this possible ???
View 1 Replies
View Related
Aug 25, 2013
I'm making a custom BINGO board in Excel 2010 for a family reunion, so it doesn't contain numbers; instead it has words (like "has brown eyes" or "served in the military"). the first sheet is the board and looks like a traditional BINGO board with the same number rows and columns with a center FREE space. On the second sheet is the list of all the phrases I'm going to use, one phrase per cell, all in Column A.
In BINGO cells, I want it to use one item (phrase) in each box but NOT repeat within the board. I have the following code in each cell and it works EXCEPT, there is no code telling it to make each cell unique, so sometimes it may repeat.
=UPPER(INDEX(ColumnA,((RAND()*(Data!A1-1))+1),0))
View 8 Replies
View Related
Jan 13, 2013
Using Excel 2010. Is it possible to change the default line thickness and fill color when selecting the ActiveSheet Target Row below?
I would like a thin border and a light grey fill - without interfering with any fomatting or conditional formatting that has been applied to the worksheet.
View 1 Replies
View Related
Feb 25, 2014
I work on an excel spreadsheet all day and I'm constantly cuting and pasting a value to filter another column. I would love to have a macro button that would automatically do this.
The job card sheets are labled 'Page 1' through to 'Page 175'. As I am working on each job card sheet I need to filter column on another sheet within the same workbook. This is indicated on the attached picture.
So in a perfect world as I would enter in the PLANT ID number on to any job card, then hit a macro button on the toolbar and the Pole No column would then be filtered by the value in the PLANT ID cell.
As there are multiple job cards the macro would probably need to use the 'active cell' value to filter by. But as you can probably tell I'm no expert so you judge the best way to do it.
MWTS034G22 Job Card Sheet
[URL] .....
Windows 7 (32bit)
MS EXCEL 2010
View 2 Replies
View Related
Mar 5, 2014
I have a file that contains multiple rows of data. I built a macro that will then hide rows with a $0 balance. When the macro is completed, my spreadsheet is only showing the lines with a $ amount. (The $0 rows are hidden)
What I'd like to do is then format the unhidden rows so that each alternate row is color coded. This will separate the rows visually so I can more easily follow the rows across to view $'s per line.
I've attached a sample spreadsheet (it does contain the macro to hide the $0 rows). How can I then format the remaining rows with alternate shading?
View 4 Replies
View Related
Jun 26, 2014
I have been given a task to create a line graph who has 10 categories and each category has 5 different values. I need to plot a line graph, so that those 10 categories should appear on the Y-axis instead of X-axis.
I am using Excel 2010.
View 8 Replies
View Related
Oct 22, 2011
I'm having some trouble getting control ENTER & EXIT events to fire properly when having controls embedded on frames within a userform. I'm using Excel 2003, 2007, & 2010. Here's the userforms I'm working with:
With FRAME:
Without FRAME:
In both cases, the DESCRIPTION field is disabled. The selectable controls on both are a combo-box, textbox, listbox, & 2 buttons. On the FRAMED version, the combo-box & textbox are contained on a FRAME.
Here's the code, same on both userforms:
Code:
Option Explicit
Private Sub cmbRecipes_Enter()
ListBox1.AddItem "ENTER - " & cmbRecipes.Value
End Sub
Private Sub cmbRecipes_Exit(ByVal Cancel As MSForms.ReturnBoolean)
ListBox1.AddItem "EXIT - " & cmbRecipes.Value
End Sub
All this is doing is posting a message to the listbox when the combo-box ENTER & EXIT events fire. This works as expected without the FRAME, ENTER is shown when the combo-box is entered and EXIT is shown as focus is moved to another control. But when running it on the FRAMED version all I get is a single ENTER event recorded regardless of how I move the focus through the control set.
Another oddity is that if I have more than 1 control that can receive focus on the FRAMED version, it appears to work correctly.
View 6 Replies
View Related
Mar 20, 2014
I am trying to apply icon conditional formatting in a cell. The cell contains the following formula: =VLOOKUP(D20,'owssvr(1)'!O:W,9,FALSE The formula results in a "2", "1", "0" or "-1" in the cell. The icon conditional formatting is not working at all (no icon appears). I have the conditional formatting setup as numbers Green 2, Yellow 1,0 etc based on value. If I delete the formula and just type in any of those numbers directly, it works. I have changed my cells to "number" and it still does not work.
View 3 Replies
View Related
May 2, 2014
I have an Excel 2010 spreadsheet that I am using to save several numbers all in the same column. These numbers can range from the several thousands up to billions. The formatting I am using for these numbers is Number (using 1000s separator).
number_forma.png
I am also using the spreadsheet to generate a text string for each of the numbers. I don't want the text string to show the number as it is, I want to shorten the number by only showing the first few digits followed by a "B" for billion, "M" for million, or "K" for thousand. For example, in the text string I want to show 1,600,000 as 1.6B.
In order to shorten the number I use the cell in the column to the right of each number. This cell uses the following custom formatting (which I found by doing a Google search): [>999999999.999]#.0,,,"B";[>999999.999]#,,"M";#,"K";
custom_format.png
As you can see the formatting is quite complex (at least for me it is) but it does what I want it to do.
Here is a screenshot of what the original and custom formatted cells look like:
custom_formatted_cells.png
As you can see the custom formatting works and does exactly what I wan
The next column (after the custom formatted number) is where I put the generated text string for each of the numbers. As I stated above, I want the generated text to use the shortened version of the number (e.g. 1.6B).
To generate the text I use the CONCATENATE function with a reference to the cell containing the shortened number as one of the arguments. For example:
CONCATENATE("SOME STRING ", B1)
Where B1 is the custom formatted cell.
The problem I am running into is, the text that gets generated doesn't show the shortened format of the number, it shows the full number. Here is a screenshot demonstrating what is happening:
concatenate_formula.png
As you can see the generated text is "SOME STRING 1600000000". This is not what I want. I want the generated text to be "SOME STRING 1.6B".
I think I understand what's going on. When the CONCATENATE function references a cell it takes the actual value of the cell and ignores any formatting. (I suppose formatting is just the way you see the data, not how underlying functions receive the data.)
My question is, how can I re-write the CONCATENATE function (or use another function, etc. available to me) to use the formatted version of the cell?
*UPDATE* I have attached my spreadsheet as an attachment to this post (tackyjan_excelforums.xlsx). Please note that it was created and saved using Excel 2010.
View 8 Replies
View Related
Jan 2, 2014
I'm using Excel 2010. I have a spread sheet with sales data covering 3 years and multiple customers. I was able to create formulas such as this to calculate the figures for the entire sheet (all customers) by year.
=SUMIFS(J2:J12904,E2:E12904,">12/31/11",E2:E12904,"<1/1/13").
I believe that in order to use filters that show this date for a specific customer I need to convert this to a SUMPRODUCT formula, I've tried this multiple times and had no luck.
View 13 Replies
View Related
Sep 17, 2012
I would like to hide/Unhide last active four columns by clicking a command button.
Example:
Columns a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p,q,r,s,t,u,v,w,x,y,z
When ever i click on command button for the first time, last four columns should be hidden, (w,x,y,z)
On next click, columns (s,t,u,v) should be hidden.
I want similar functionality to unhide the columns with different command button.
View 5 Replies
View Related
Feb 24, 2011
I am using Excel 2010 and I have a password protected workbook with password protected sheets that uses several macros. Most of them, in order to run, have to un-protect the sheet and then re-protect it again. This has been accomplished easily enough by adding ActiveSheet.Unprotect Password:= "mypassword" and ActiveSheet.Protect Password:= "mypassword" to the appropriate places in the script. All of my macros, which do various things like sorting and moving data, deleting blank rows, displaying dialog boxes containing warning messages etc. run fine.
My problem is this: when I password protect the sheets manually, I have checked the following options in the "Protect Sheet" dialog box. Under "Allow users of this worksheet to" I have checked 1)Select unlocked cells and 2)Format cells. After entering my password and closing the dialog box my sheet is protected, but I can edit cells in the manner my allowances permit. However, once I run any of the macros that un-protect and re-protect the sheet, I remain able to select and edit unlocked cells (practically, for my purposes, this means that I can input data which will appear in the default font size and color of the sheet) but I cannot format cells (which, practically, for my purposes would allow me to occasionally change the font color and size of the data). Naturally, after running a macro, the other cell-formatting options are unavailable to me as well. Is there any way to get my manual selections to remain in place after running a macro that functions as mine do? Or is there any way to make my manual selections the default settings for a protected sheet?
View 4 Replies
View Related
Mar 6, 2014
I am running excel 2010 with windows 7. I created a macro in sheet 1 and I wish to activate the macro from sheet 2 using a form button. I have entered the code below. I know how to perform this function on a more simple macro like adding names to cells. This code is a bit more complex I just dont know where to start.
Code:
Sub LoanData()
'
' LoanData Macro
[Code].....
View 3 Replies
View Related
Jul 23, 2012
I have 2 workbooks in Excel 2010, each contain just 1 sheet. (see attached) I need to compare on sheet 1, cell D1 and column A:A (this column will be much longer), with the data in columns C:C & A:A on sheet 2, if a corresponding match is found, the data contained in column D on the same row on sheet 2 is written to the cell with the matching data in sheet 1.
My attempt is in cell D2 on sheet1.
View 5 Replies
View Related
May 21, 2014
How to modify the below vba code? It sends an email with an attachment right away after pressing the macro button. I would like the user to see the email in outlook before it gets send... and then press 'send' in Outlook .....
Sub Mail_ActiveSheet()
'Working in Excel 2000-2013
'For Tips see: http://www.rondebruin.nl/win/winmail/Outlook/tips.htm
Dim FileExtStr As String
Dim FileFormatNum As Long
[Code] .....
View 1 Replies
View Related
Apr 11, 2014
How to create a summary/index sheet for multiple sheets in single excel file...
View 1 Replies
View Related
May 14, 2014
I currently have the following macro running to set a chart's data values:
Sub C3Quarter12013()
'
' C3Quarter32013 Macro
'
'
ActiveSheet.ChartObjects("Chart 2").Activate
ActiveChart.PlotArea.Select
ActiveChart.SeriesCollection(1).Values = _
[Code] ......
When I copy the tab and change some of the data within the cells, I want the macro refer to the chart on the current tab and the values in the current tab - as currently it refers to only "Chart 2" and the values in the tab 'Figure 2 - WE OPH'.
I've tried changing the sheet name to ActiveSheet.name but that doesn't seem to work.
View 4 Replies
View Related
Jun 18, 2014
When i add a new sheet in excel 2010 at that time i getting error that "Unable to run this command on multiple selections in vba". This error get on both through code and manually.
View 1 Replies
View Related
Aug 13, 2007
I need that the active cell in each worksheet of an excel file to be the cell A1( i.e. when I open a file/ a worksheet the cursor is in cell A1)
View 11 Replies
View Related
Apr 12, 2012
I have a boolean toggle for disabling and enabling a Workbook_Change event.
Right I invoke macros to turn the Workbook_Change event on and off and I don't know what state it's in.
Two Questions:
1) (required) I would love to be able to visually know if it's enabled no matter which sheet I am on
2) (bonus) Be able to change the state with a persistent interface (e.g. perhaps the Ribbon?) no matter which sheet I am on.
View 1 Replies
View Related
