Excel 2010 :: Referencing To Worksheet Crashes
Oct 31, 2011
I use Excel 2010, 64-bit-version with Windows 7. I have one workbook, where whenever I create a formula that references to one specific sheet, the Excel crashes and cannot be quitted even with Task Manager. I have to restart the whole system.
I do not have any worksheet events in either sheet. This is the same workbook that crashes if all cells are selected from the top-left corner of the worksheet.
I tried by deleting unnecessary COM add-ins but that didn't work.
View 1 Replies
ADVERTISEMENT
Jun 15, 2012
I have a a spreadsheet that pulls user information from our corporate address book. I would then like to copy that data to another worksheet for additional data scrubbing. The problem I am facing is that, I can get the reference to work the first time but if I pull new data down, the destination spreadsheet now shows #REF!
I've tried using the below formulas but they all wind up the same way. ' Results' is the name of the spreadsheet I am making the reference to which has the dynamic data in it.
=Results!#REF!
=INDIRECT("Results!$B3")
=indirect (cell("results",B3)
View 1 Replies
View Related
Aug 3, 2013
Ok so I have an extensive worksheet that pulls a lot of data from the web, 47 connections to be exact. So on my work computer that runs excel 2007, the data refreshes instantly and I can see all the numbers flying through and changing as the sheets refresh.
However, my personal computer running excel 2010 hangs up with any type of data refresh, not just this sheet in particular. This computer has 8 GB of ram so I don't think that would be the issue?
Does excel 2010 have an issue with data refresh from the web?
View 4 Replies
View Related
Dec 20, 2013
The macro does numerous things, including deleting the sheet that was active when it is called. If the sheet is not deleted, there is no crash. Otherwise, Excel crashes as soon as the VBA interpreter hits "Exit Sub". The Excel message is simply "Excel Stopped Working". The macro also saves the workbook before finishing, and the saved workbook opens just fine, but it's unacceptable to have to kill Excel and restart it every time (I am not the main user for this spreadsheet). I'm using Excel 2010 on Windows 7.
View 7 Replies
View Related
Feb 12, 2014
Windows 8.1, Excel 2010. I have this code that updates the links. I use it in various workbooks, but they are all going to the same document; "Data Master (QC"
ThisWorkbook.UpdateLink Name:=ThisWorkbook.LinkSources
When I change computers, I have to manually tell each document where to fine the linked document. I want the documents being linked to look for the file path in a designated cell, i.e Cell E3 = "C:UsersOwnerDocuments1-QCDataData Master (QC).xlsm".
Something like ThisWorkbook.UpdateLink Name:=ThisWorkbook.Range("E3").Value
View 1 Replies
View Related
Jan 9, 2013
I have a rolling 12 month (each day in column) tab in Excel 2010 that references variances by ID number in column A, and the column headers are each day for 366 days (2011). I would like to create a tab that shows the past 10 day's variances by ID number. I haven't been able to write a formula that will look at the date headers and the row ID number to return the figure for that day. Here is a sample of the 12 month rolling and the 10 days at a glance that I want to populate.
Rolling 12 Months
IDName12/25/201212/26/201212/27/201212/28/201212/29/2012and so on
1234Employee Name - - - - (11.07)
1235Employee Name - - - 0.20 -
1236Employee Name - - - - -
1237Employee Name - - - - (1.00)
[Code] .........
View 4 Replies
View Related
Apr 19, 2012
I am using Excel 2007 in Windows XP. I am trying to change the worksheet referenced in a formula from the label of the worksheet to the index of the sheet. I want to use this macro in multiple workbooks, and the relevant sheets have different names but are all in the same position.
I used "record macro" to get the structure of my code. It gave me the line:
ActiveCell.FormulaR1C1 = "=SUM('8Nov11'!R[13]C[-4]:R[108]C[-4])"
I want to change that '8Nov11' to the 3rd worksheet from the left, so something like:
ActiveCell.FormulaR1C1 = "=SUM(ThisWorkbook.Sheets(3)!R[13]C[-4]:R[108]C[-4])"
I can't get this to work, and I can't find the syntax for this anywhere. I've tried with and without quotes, exclamation points, changing to A1 notation and using "Range," "Sheets," "Worksheets," "Item(3)", and many other combinations, but haven't gotten it right.
Most of the errors I get are "Runtime Error 1004: Application-defined or object-defined error."
View 3 Replies
View Related
Feb 12, 2014
we have a Excel 2010 worksheet containing multiple tables.
Table1
ColumnA ColumnB
1 Blue 12
2 Orange 14
15
11
3 Red 10
Table2
ColumnA ColumnB
1 Blue 11
2 Black 13
15
11
3 White 10
19
17
On a separate worksheet we want to calculate with the first worksheet's values.
For example: Calc1: Sum ColumnB IN Table1 WHERE ColumnA = Orange
How do we do such a calculation/formula?
View 4 Replies
View Related
Apr 21, 2012
I have a workbook that contains 50 worksheets named 1-50. I need to add more worksheets. all the formulas in the worksheets always refers to the previous worksheet.
How can i make a copy of the worksheet named 50, name it 51 and have all the formulas in worksheet 51 refer back to worksheet 50?
View 1 Replies
View Related
Dec 11, 2012
Excel 2010 / Win 7.
I have some code that imports a csv file into a workbook. This works fine when i use a file named .csv. I was hoping to use a random file name (in this case .bmhs) so that we can determine which files we need to import.
The problem i have is when importing a '.bmhs' file the data comes in column A and is a comma seperated list. If i use .csv then the commas are used as the column seperators (which i need).
impFle = Application.GetOpenFilename(filefilter:="BMHS Files, *.bmhs", Title:="Select Import File")
would give me 1,2,3,4 all in column A
impFle = Application.GetOpenFilename(filefilter:="CSV Files, *.csv", Title:="Select Import File")
would give me 1 in column A, 2 in column B, 3 in column C and 4 in column D.
Is there any way that i can maintain using my own file name (.bmhs) but have excel treat it as a csv file.
View 2 Replies
View Related
Jul 30, 2014
I am using lesson 33 of Excel VBA and Macros with Mr Excel as my guideline. The coding is as follows:
Dim WBO As Workbook 'original workbook
Dim WBN As Workbook 'individual data workbooks
Dim WSL As Worksheet 'List of files worksheet
Dim WSN As Worksheet
Set WBO = ThisWorkbook
Set WSL = WBO.Worksheets("List")
Set WSD = WBO.Worksheets("Data")
[Code] ......
I have indicated above with ( ) the beginning of my problem.
From the workbook with the list of workbooks to open, in each case I want to refer to a worksheet in each workbook
named "Report" and grab all the rows with data exept heading (rows 1 & 2) and 9 columns.
How do I get WSN in the code above to include the worksheet named "Report" or do I need different coding. Using Windows 7 & Excel 2010.
View 1 Replies
View Related
Sep 30, 2012
I am trying to set up a simple sports picking list using Excel 2010. I would like to be able to carry out several filers and then extract results to a new sheet to allow printing.
For example, there are four available terms and I would like to be able to filter by term/sport and student. Ideally I would like to be able to add a command button once this is working.
View 5 Replies
View Related
Nov 18, 2011
I am using excel 2010, windows 7. When i make a new worksheet or update it randomly blanks out lines that already have information in them. It blanks out the row number also.
View 1 Replies
View Related
Apr 24, 2014
I need to create 3 or 4 detailed reports from an excel 2010 worksheet.
My worksheet contains data including date, invoice number, company , consultant, days, dollars. There are approximately 100 records in the worksheet.
Requirement 1 :I want to use excel 2010 to automatically generate a series of reports broken down by consultant showing date, invoice number, company, and consultant with totals for days and dollars, when all the records for consultant 1 are listed, then I want to show consultant 2.
Same for any other consultants with a grand total at the end.
My understanding is that excel 2010 makes this process very simple .
View 3 Replies
View Related
Mar 27, 2013
I have a workbook with worksheet like 2a, 2b, 2c, 2d, 2e, 3a, 3b...etc Is it anyway i can make a tab which will hide a group of worksheet (like 2a,2b....2e) together and unhide all the worksheet with another click on it? becasue i got too many worksheet to show in the bottom..
View 2 Replies
View Related
Aug 14, 2013
I am using Excel 2010 64-bit (with SP2 and all other updates installed).
I have a worksheet where some cells have a yellow background, based on conditional formatting of what is in column A. (Note that data in column A changes, so the row can sometimes be yellow and sometimes be white.)
I need to sort this worksheet as follows:
1. By background color, so yellow is on top, white is on bottom.
2. Then, within the yellow rows, data in column J.
3. Then, within the white rows, data in column A.
Currently, I do this manually by sorting the entire worksheet by column A, then selecting only those rows that are yellow and sorting by column J.
Is there a way to combine these steps, perhaps with a macro?
I initially thought to make each "background color" its own table, but since column A can change and thus the background color of a row can change, I need to be able to have rows move from yellow section to white section. I don't think having two separate tables allows that.
View 2 Replies
View Related
Feb 16, 2014
I have an excel file with three worksheets in it. I can happily protect each sheet with a different password but what i want to be able to do is the following:
a. have a global administrator password for all the sheets - so i assume set the same password to protect the whole sheet
b. have individual passwords that only allow the user to insert rows and change data within restricted columns, i.e. can only edit columns A:Z and cannot manipulate any formulas within that range A:Z
I have excel 2010 if that makes any difference.
View 2 Replies
View Related
Mar 29, 2014
I need to create a separate PDF file for each Excel Worksheet, each worksheet has a different name.
I am using Excel 2010
View 1 Replies
View Related
Feb 21, 2014
where to find a spreadsheet which has a macro to perform the FFT on data with > 4096 points? It seems Excel's internal FFT is limited to this amount. I searched the forum and elsewhere on web and have not found what I am looking for. I wish to enter the data in a column of the spreadsheet, preferably in a named range such as "Data" and have a macro perform the FFT.
View 3 Replies
View Related
Oct 7, 2011
I am using excel 2010.
I have a macro-based employee leave system that works by couting the number of days shaded with a certain colour and thus calculating leave days taken, remaining and entitled... I have a single workbook with multiple sheets for different employees.
However, when I update by using ctrl alt f9, it updates all the other worksheets (ignoring their shading) with the values of the active worksheet! So if I update Peter, who has taken 14 days so far, it will update Liam's sheet too, with 14 days, ignoring Liam's actual shaded days...
How can I update each sheet individually, without compromising the other sheets?
Excel is not responding to Shift - F9.
View 3 Replies
View Related
Dec 12, 2011
I have created a worksheet and password protected, I know the password but now want to send to someone and remove the password protection option instead of them having to use a password to open it.
View 5 Replies
View Related
Oct 27, 2013
how to use the offset function to create a dynamic range in Excel 2010. An in-house Excel form I work with spans columns A thru P and has three sections. In Section 2 the user fills in employees who are requesting to work overtime. Section 2 starts row 12 and ends row 61. It's sometimes necessary to add rows to this section. How do I make this section/range dynamic using the offset function?
View 1 Replies
View Related
Nov 5, 2013
I have a workbook that filters the data on the worksheet "Reports" this then adds new worksheets and copies and pastes the relevant data that has been sorted, this is done by the name in column "B".
What I need is to rename the new worksheets with the data that is in cell "B2" of the new sheets.
Using excel 2010.
View 4 Replies
View Related
Dec 3, 2013
Code:
=SUMPRODUCT(--(_NamedRng1=NamedRng2),$B$49:$F$49)
I am using the above formula in my code with two Named Ranges
Code:
Set Rng3 = Range("_NamedRng1").Offset(1, 0)
=SUMPRODUCT(--(_NamedRng1=NamedRng2),rng3)
[/CODE]
I want to set the range $B$49:$F$49 in my code and I have tried the above, but it does not work.
I want to allow for the fact my end user may insert rows so do not want to use $B$49:$F$49
View 2 Replies
View Related
Jun 20, 2014
I have a workbook that is doing something I don't understand. In several places I am using arrays to transfer/modify information, then placing the array back onto the worksheet, and this works perfectly. The following code... doesn't.
(I've cut out unnecessary code like variable declarations - all my integer items are declared as Long)
Code:
Dim varA As Variant, varB(10000, 1) As Variant
Set wkDest = Sheets("a")
erB = 0
For lpTerm = 1 To 4
[Code]...
and several other ways. What happens is just null output, a full column of nothing. However, when I expand my worksheet range to two columns, all the data from varB appears - it is shifted down one column and row. So my data starts at .cells(2,2) instead of .cells(1,1). The data is all perfect, I've verified it left and right.... I just can't figure out why it's getting shifted like this.
View 2 Replies
View Related
May 3, 2013
coding a VBA macro for one of my workbooks, in which I need to be able to hide/unhide various rows in one worksheet depending on the value of a cell in a worksheet elsewhere in the workbook. The rows start off hidden by default.
As a simplified example:
Worksheet1 has a cell that has option "Set 1," and "Set 2." Worksheet2 has two sets of rows (say, 20:30 and 40:50) that need to be hidden/unhidden depending on the cell in Worksheet 1. These are hidden to start with!
So if Worksheet1's target cell says "Set 1", then on Worksheet2, rows 20:30 would stay hidden and rows 40:50 would be revealed, and then if the target cell says "Set 2," then on Worksheet 2, rows 40:50 would then be hidden, but rows 20:30 would then be revealed.
I was thinking of using something like this:
Rows("20:30,40:50").EntireRow.Hidden = True
If Target.Address="'Worksheet1'!A1" Then
If Target.Value = "Set 1" Then
Rows("40:50").EntireRow.Hidden = False
Else
Rows("20:30").EntireRow.Hidden = False
End If
End If
I think this might work, but every time I try to run this I get various errors, like not referencing my target cell correctly.
View 5 Replies
View Related
Aug 5, 2013
Excel 2010. How/where to define userform object?
Button on worksheet has following code:
Sub Button1_Click()
Load UserForm1
UserForm1.Show
End Sub
Execution of this code generates following error:
Run time error 424
Object required
How/where to define userform object?
View 1 Replies
View Related
Mar 7, 2014
I need a formula or array to perform the following in Excel 2010:
I have 2 worksheets "Master Report" and "Free text comments". The master report will be shaed with individuals but the Free Text comments worksheet will not.
sample feedback report.xlsx
In cells D2 downwards on the "Master Report" I want to show the individual feedback comments from the "Free Text comments" worksheet that have been made by other people for the individual named in cell A2 on the "Master Report" worksheet. So on James' master report it would show the 8 individual comments listed for him on the Free text comments" worksheet.
I have searched the internet and tried various combos of lookups, IFs, index and match but have not come across the right formula yet.
View 1 Replies
View Related
May 29, 2012
I have Columns A to C which are hidden. I have tried to unhide these bey selecting the entire worksheet but to no avail. I am using Office 2010.
View 4 Replies
View Related
Oct 18, 2012
i found this code...
Code:
Sub Button1_Click()
Dim cnt As ADODB.Connection
Dim rst As ADODB.Recordset
Dim stSQL As String
Dim SNfound As String
'Your sqlserver 2008 connection string
Const stADO As String = "Provider=SQLOLEDB.1;" & _
"" & _
[code].....
but i dont see where to put in the Database object...
The Database it needs to connect to in SQl is called
The Server name is SQLSRV when you expand databases the database is called SWHSystem the Table is called dbo.Credential and from that i need to get SELECT All from the Name and CardNumber from dbo.Credential and put that in a New Sheet titled Personal
using Excel 2010 connecting to SQL 2008
View 4 Replies
View Related
