Excel 2010 :: Selecting Corresponding Values From Multiple Columns
Feb 18, 2014
I have a spreadsheet with two date/time columns 'Date1' & 'Date2'. Each date/time column has its own column with corresponding values ('Var1' & 'Var2'). These dates cover the same time period, however values for 'Var2' were collected less frequently than 'Var1'. I want ONLY the values in 'Var1' that correspond to the dates in 'Date2'
I am trying to select values from one column 'Var1' which have correlating date/time in column 'Date1' that match the dates specified in 'Date2'. Basically I need the values from 'Var1' that match the same date/time as 'Var2'
I wish to select all the cells which contain the word " Available " in column A at once . But i didn't find any option to do so using excel's Go TO Special feature.
I have a table in columns C:J, starting in row 7. I have a macro that selects and copies the whole table (after I filter the table) and pastes to another sheet. Recently I've realized that I can only copy/paste C:I or it will mess up my formulas during the process.
This is the code I have right now, which works beautifully for the whole table:
What I need is to know how to copy everything in the table except column J. I can't just copy a certain range cells because the number of rows is variable. There has to be a way to modify the ActiveSheet.ListObjects("Table36") right?
I have a spreadsheet (Excel 2010). I want to fill categoryid in Sheet One based on values of Skill and State which are part of field in Sheet two.
Sheet One (Has Four Columns and I am looking for filling CategoryID based on Sheet Two FirstName LastName Skill State CategoryID John Edward Ballet California Ed Catalino Tap London Natasha Curtis Ballet Australia Shen Watson Modern Kansas
I have to construct a financial model for Senior Executives to show year to date spent amounts. I have my worksheet as follows:-
Cell A2,A3,A4.. to A100 has - Account Numbers (Ex. A/c. 4100..) Cell B1, C1, D1.....has Jan2011,Feb2011,Mar2011.......and so on till Dec2011. Cell B2 onwards, down and to right, all spent amounts by month
What I need is a formula to get year to date number, which will change to Executives requirement.
Col A being Name, B being primary skill, C secondary skill and D tertiary skill. (Sanitised example below)
There are about 15 diferent types of skills ("Skill x, Skill y etc") listed in each of column B,C and D.
I would like to have a filter (or similar) where all names would show if a certain skill is present in either column B, C or D.
For example, a filter that on the below spreadsheet would allow me to view the names of all people who have "Skill x" either as a primary, secondary or tertiary skill.
I am trying to sort each "Pct" column in descending order. Of course, I can do this manually, but I have over 100 to do, so I'd like to know how I can automate this (of course, the two columns to the left of "Pct" must move along with it).
I have 2 worksheets. One has Employees and the devices they have. Last name, First Name, Device each in their own colulmn. Many have more than 1 device so they have multiple entries on seperate rows.
Another worksheet has Employees and thier location. Last name, First Name, Location. Again, all on seperate columns.
It would look something like this
Sheet1 Lastname Firstname Device Johnson
[Code]...
So I'm tasked with combining them into 1 sheet with last name, first name, device and location. The issues I'm having are:
1) A team member could have multiple devices 2) A last and/or first name can appear many times, so a simple Vlookup against lastname won't work - it has to somehow also compare against both.
I am trying to create a scatterplot from some data I have. I attempt this by selecting multiple columns using Ctrl and clicking on the letters above. This results in it plotting only the first selected column on the Y axis with only 1 2 3... on the X axis.
When I however select multiple columns by clicking on a column and dragging to more columns it does plot as I would expect with the first column as X values and the rest Y values.
I know it is possible to create a graph and add data manually but this is way slower and I think that it should be able to be done differently.
I have a long list of data with many columns and I'd like all the information to be in one column without manually copying and pasting each column and adding to the first column. The data has different amounts of rows and columns as well. An Example is below. I'm using Excel 2010. Is there a formula or something for this? This isn't the data I'm using but just an example since I do this frequently.
I have in column A duplicate values and in column B different responses (Sheet: Lookup). I need to look up the value in column A (Sheet: Results) and bring back all the responses in column B (horizontally).
I am working with an Excel 2010 workbook that has two worksheets in it. What I am trying to accomplish is I want the second worksheet to scan the first worksheet for a student's name, and count all of the instances that the student has a score less than a certain threshold (we'll say "5" for this example). I have tried using various combinations of vlookup and countif functions, but have not had much success. I did get it to a point where it worked, but only for the first instance of that student's name; it wouldn't continue searching the first worksheet for any other instances.
I have attached a sample workbook as a reference : Sheet1.xlsx
When I update a cell (change A1 from 2 to 3), any cell that references that cell correctly changes its value (B1 = 2*A1). However, the screen will show the new value in B1 (6) over the previous value (4). At first I thought it almost looked like a strike-through, but then I realized the old value and new value were simply stacked in B1.
If I scroll the screen away that cell and go back to it, the correct value will now show without the stacked values. I'm not having this issue in any other program (Open Office), and I don't seem to be having any kind of stacking issue in any other Microsoft program.
I'm trying to compile a VBA that would allow me to compare 2 columns "A" in different worksheets (same Workbook) and output any unique values to 3rd worksheet together with the rest of the values in the corresponding row.
I have lot of data in Excel 2010 which I wish to bring in Columns using a Macro depending on the input value which the macro should prompt me. For E.g.:
If I select data from A1 and J1 (in practical it will be more Columns) the Macro should prompt me how many Columns would be the output on Master Sheet. If the input is 2 then it should create an output Sheet "Master" and should show the following result
It after selection I run the macro and input 3 then the output should go in three columns (A1,B1,C1) one below other. If 4 is Input then 4 Columns (A1,B1,C1,D1) will come below each other so on and so forth.
Basically I have a big table containing several columns for the different quarters. (Each quarter has several columns which are not all next to each other)
I would like to use 4 checkboxes which the user can select the show or hide the columns for that quarter. E.g. if Q1 and Q3 are checked only those are visible)
(if quarter 1 clicked than all columns are visible if unclicked hidden).
The code I have written workes well for the first checkbox (Q1), but for the other quarters (Q2, Q3 and Q4) the columns get hidden when checked (which should be the other way round) and don't get unhidden when unchecked.
Sub CheckboxQone() If Range("$A$1").Value = True Then Call showQ1 Else: Range("$A$1").Value = False Call hideQ1
I'm having issues with Excel's 2010 conditional formatting. Seems easy to use, but I'm trying to highlight values based on 2 columns of numerical data. Example:
Column F: 6 6 14
Column L: 3 NA 17
I would like Column L to highlight values that are greater than Column F in green. If they are less than Column L then highlight them in red.
Seems I was able to do this with Excel 2003, but I don't understand the 2010 version.
I am trying to sort multiple values in ascending order (example attached) however I can't get this to work. Tried looking at a few different forums and although there is plenty of sorting questions out there they all tend to be relating to dates not different values (i.e text and numbers).
I have 3 ranges of data which each have a quantity and a length. I want to create from these ranges a list of unique values with the total quantity required of each value (as shown). Inputs on any column may be blank but where there is a length, there will be an adjacent quantity to the left.
Using Excel 2010, I am trying to do a Sumproduct formula with two criteria, one of which needs to ignore text values.
Here is the set up:
Column AColumn BColumn C (Side)(Qty)(Price) Buy5,51215.67 Sell119,428null Buy24,20945.77 Sell20,05412.25 ...
I'm trying to find the sumproduct of Qty * Price if the side equals "Buy" (or "Sell") but ignoring the "null" value in column C. The formula I have is =SUMPRODUCT(--($A$2:$A$20="Buy")*IF(ISNUMBER($C$2:$C$20),--($B$2:$B$20*$C$2:$C$20)))
The result in the cell is 0, but if I open the Insert Function dialog box, I see the correct value being returned.
My Excel program (Excel 2010) currently has several columns and each column looks for and pulls data from a specific file on my computer. Then I need to delete any duplicate data entries, count the number of unique entries and track the changes through a chart. I have everything done except I cannot figure out (or find on the internet) a way to search in multiple columns (more than 2) and delete just the duplicate cells. I want to delete the cells in a way where there is one left. For example if the code 12gf is duplicated three time, I want to be left with one 12gf (it doesnt matter what column the original one is left in). Additionally, column length changes and they are not sorted. I have attempted to attach an image of an example file below.
I have a sheet (see Sheet 1) from a report we run which lists the following information: Personnel Number, Amount, Wage Type. This is generated for 1000's of employees, with each personnel number being repeated several times in column A.
I am trying to pull specific data to another sheet (see Sheet 2), which would ideally generate the sum of "Amount' for a specific wage type for each personnel number. The issue is is that there may be dplicates of the wage type for each ID number (which is also repeated).
For example, the total salary amount on sheet 2 for ID#12345678 would be 0, while for #9876543 it would be 1250. Is there a formula I could use on sheet 2 column B that would generate this?
After adding worksheets, data to ranges, etc. I want to step through each worksheet and "Select" or "Activate" a specific cell (Mainly to clear all the range selections).
My code does the job except the second to last part of cell selection/activation.
