I have 3 ranges of data which each have a quantity and a length. I want to create from these ranges a list of unique values with the total quantity required of each value (as shown). Inputs on any column may be blank but where there is a length, there will be an adjacent quantity to the left.
I'm using Excel 2010.
Using Excel 2010, I am trying to do a Sumproduct formula with two criteria, one of which needs to ignore text values.
Here is the set up:
Column AColumn BColumn C
(Side)(Qty)(Price)
Buy5,51215.67
Sell119,428null
Buy24,20945.77
Sell20,05412.25
...
I'm trying to find the sumproduct of Qty * Price if the side equals "Buy" (or "Sell") but ignoring the "null" value in column C. The formula I have is =SUMPRODUCT(--($A$2:$A$20="Buy")*IF(ISNUMBER($C$2:$C$20),--($B$2:$B$20*$C$2:$C$20)))
The result in the cell is 0, but if I open the Insert Function dialog box, I see the correct value being returned.
I need to display a set of cells based on the value of two drop down cells i have. As I am not very good at english and worse at explinations, I'll try via screen shots...
I have two dropdowns (C4 and C6) that will indicate what table to use (Second sheet / screenshot). I want that "table" to display in the yellow box on the first page. To complicate matters, some options do not have a CLA option - those starting with X. As there are 24 different outcomes and each is 3x9 if/then statements just dont seem to cut it.
P.S. I have excel 2010 and windows 7
I am using excel 2010.
I have a spreadsheet with the following:
Column E is a product. If that product is ordered, any character is entered in that cell
Column F has a due date
Column I has the received date
What I want is to count the number of cells that have any character in column E AND the received date is later than the due date
These two formulas are working fine alone but I cannot get them to work together.
=SUMPRODUCT(--(F:F<I:I))
=SUMPRODUCT(--ISTEXT(E2:E1000))
I have tried all kinds of tweeks to the following to no avail:
=SUMPRODUCT(--(F:F<I:I),--(ISTEXT(E2:E1000)))
I have some data with recurring key values and differing values in the second column, I need to produce a unique list of key values with the second values concatenated together.(See below)
The data can be 10 rows to 5000 and I can have anything from 5 to 150 sheets (Separate data sets), a macro would go a long way to keeping me sane.
Sample data Required Output
A | B Z
1| 10 | a 10,a,b,c
2| 10 | b 11,a
3| 10 | c 12,a,b
4| 11 | a
5| 12 | a
6| 12 | b
My system is Windows 8 Excel 2010.
I gather two lists of serial numbers (i.e.) from two different sources; one populated in sheet1, A:A (with variable row numbers) and the other in sheet2 B:B (again with varying number of rows)
I am trying to gather a master list of unique serial numbers in sheet3, C:C.
So far I have tried advanced filter, union.range, etc. but couldn't figure work it. I guess some of these columns need to have names assigned to it and have a header.
I am using Excel 2010. I have a spreadsheet where column A is for Quarter, column B is for Employee, and columns C-R are for Codes (Code1; Code2; Code3; etc. through Code15). One line might have no values in the codes columns, another might have values in only Code1, another might have values in Code1 and Code2, and another might have values in all 15 columns.
A B C D E F --> R
1 Qtr Emp Code01 Code02 Code03 Code04 --> to Code15
2 2012.1 Liz CER02 INS12 WKH15
3 2012.2 Jim PIN55 WKH12 WKH19 WKH23
4 2012.2 Jon
5 2012.2 Jim WKH15 WKH23
6 2012.2 Jon PIN55 WKH15 WKH12 CER08
The worksheet is named "ALLAUDITS" and the named ranges are as follows:
Quarter: =offset(allaudits!$A$1,0,0,counta(allaudits!$A:$A),1)
Employee: =offset(allaudits!$B$1,0,0,counta(allaudits!$B:$B),1)
CodeData: =offset(allaudits!$C$1,0,0,counta(allaudits!$C:$C),15)
On another worksheet I need to be able to count how many times WKH15 appears in the CodeData range within a certain Quarter. I tried
=countifs(Quarter,"2012.2",CodeData,"WKH15")
But that didn't work, and from what I can tell in Excel support, it's because the ranges are different sizes. I have over 6500 rows, so I'm trying to avoid having to name all 15 columns and then do a sumproduct on all of them, such as
=sumproduct((Quarter="2012.2")*((Code1="WKH15")+(Code2="WKH15")+.......)))
Calculation would take forever.
I could just create a pivot table based on the "allaudits" worksheet, but I can't figure out how to get the actual codes as the row headers (instead of Code1, Code2, Code3, etc.).
I have data set up like the example but then for 1797 lines.
D39BKYes
D39BKYes
D39BKYes
D39BKYes
GHFLBNo
R80FANo
R80FANo
[code].....
What I need to get in a pivot table is: two columns or rows (Yes / No) and the unique count of the code.In this case is should show Yes: 2 and No: 3
I have a wookbook with serial numbers in column A and barcodes in column B. There are 51940 rows in total.
Is there a way I can search through column A, and for each unique value found , concatenate all of the barcodes that relate to that serial number in column C?
Serial Numbers | Barcodes | Combined Values
-------------------------------------------------------
abc123 abc12300 abc12300,abc12301, etc etc
abc123 abc12301
def456 def45600 def45600, def45601, etc etc
ghi789 def45600
i am using Excel 2010.
How do count unique values in category in pivot table. (my table, im taking data from ms query). I am using excel 2010
Pivot table example: the result i want is the "no of types" as my data only show "category" and "types".
Category
Types
No of Types
Fruits
Apple
Pear
Orange
3
Vegetable
Cabbage
1
I'm using Excel 2010 and would like to know if it's possible to convert selected ranges in multiple sheets into one PDF file? For example, I want to select range("A1:O10) in Sheet1 and range("A1:N25") in Sheet2, then convert both Excel sheets into PDF file with two pages.
View 2 Replies View RelatedI'm trying to compile a VBA that would allow me to compare 2 columns "A" in different worksheets (same Workbook) and output any unique values to 3rd worksheet together with the rest of the values in the corresponding row.
Sheet1
A
B
C
[Code]....
Excel 2010
I have an Excel Spreadsheet (2007) that contains over 500,000 records that shows Electric meter usage per month over a 24 month period per meter. What I want to be able to do is to select a meter row per number and copy is to it's own worksheet. At the end - I want to be able to have a seperate worksheet per electric meter number - that I can create a graph. If I go through all 9000 meters and copy and paste into a different worksheet - it will take me weeks to do manually. How can I do this automatically?
View 1 Replies View RelatedI have in column A duplicate values and in column B different responses (Sheet: Lookup). I need to look up the value in column A (Sheet: Results) and bring back all the responses in column B (horizontally).
Nittie Query.xlsx
I am working with an Excel 2010 workbook that has two worksheets in it. What I am trying to accomplish is I want the second worksheet to scan the first worksheet for a student's name, and count all of the instances that the student has a score less than a certain threshold (we'll say "5" for this example). I have tried using various combinations of vlookup and countif functions, but have not had much success. I did get it to a point where it worked, but only for the first instance of that student's name; it wouldn't continue searching the first worksheet for any other instances.
I have attached a sample workbook as a reference : Sheet1.xlsx
When I update a cell (change A1 from 2 to 3), any cell that references that cell correctly changes its value (B1 = 2*A1). However, the screen will show the new value in B1 (6) over the previous value (4). At first I thought it almost looked like a strike-through, but then I realized the old value and new value were simply stacked in B1.
If I scroll the screen away that cell and go back to it, the correct value will now show without the stacked values. I'm not having this issue in any other program (Open Office), and I don't seem to be having any kind of stacking issue in any other Microsoft program.
I have a spreadsheet with two date/time columns 'Date1' & 'Date2'. Each date/time column has its own column with corresponding values ('Var1' & 'Var2'). These dates cover the same time period, however values for 'Var2' were collected less frequently than 'Var1'. I want ONLY the values in 'Var1' that correspond to the dates in 'Date2'
I am trying to select values from one column 'Var1' which have correlating date/time in column 'Date1' that match the dates specified in 'Date2'. Basically I need the values from 'Var1' that match the same date/time as 'Var2'
See the attached image to make it clearer..
Excel2010
Excelhelp.jpg
My problem is :
1.In G Column I put logic for Fail and Obtained Marks.
G2=IF(COUNTIF(B2:F2,">=60")=5,SUM(B2:F2),"Fail")
2. Now in H column I want use this formula which I obtained from this forum
H2=SUMPRODUCT((G$2:G$7>G2)/COUNTIF(G$2:G$7,G$2:G$7&""))+1
To get the position of Students.
But the text value "fail" in the G2:G7 getting Position No. 1 and i've noticed the reason by using evaluate formula as well.
3. I got solution by changing "Fail" with 0 by creating column I and then column H put this formula ........
I am trying to sort multiple values in ascending order (example attached) however I can't get this to work. Tried looking at a few different forums and although there is plenty of sorting questions out there they all tend to be relating to dates not different values (i.e text and numbers).
View 14 Replies View RelatedI have a sheet (see Sheet 1) from a report we run which lists the following information: Personnel Number, Amount, Wage Type. This is generated for 1000's of employees, with each personnel number being repeated several times in column A.
I am trying to pull specific data to another sheet (see Sheet 2), which would ideally generate the sum of "Amount' for a specific wage type for each personnel number. The issue is is that there may be dplicates of the wage type for each ID number (which is also repeated).
For example, the total salary amount on sheet 2 for ID#12345678 would be 0, while for #9876543 it would be 1250. Is there a formula I could use on sheet 2 column B that would generate this?
Excel 2010 ABC1Personnel NumberAmountWage Type212345678550Payment312345678400Overtime412345678300Overtime512345678250
Payment612345678750Vacation798765432800Salary898765432250
Payment998765432100Overtime1098765432450Salary1198765432300Overtime
Sheet1
Excel 2010 ABC1Personnel NumberTotal SalaryTotal Overtime212345678398765432
Sheet2
How to add Sumproduct and Min/Max functions? Using Excel 2010
I am looking for the minimum, or maximum number within a range while using the Sumproduct function.
=SUMPRODUCT(--ISNUMBER(FIND("R",CMSB3003.xls!$A$12:$A$20000)),--ISNUMBER(FIND("Reg",CMSB3003.xls!$AF$12:$AF$20000)),
--(CMSB3003.xls!$B$12:$B$20000>=$B$2),--(CMSB3003.xls!$B$12:$B$20000
I have two lists of values in separate columns with condition in adjacent cells, all on the same sheet
List 1 consists of numbers from 1 to 12, column to the right is either blank or Free
List 2 consists of numbers from 13 to 24, column to the right is either blank of Free
List 1 starts in A2, B2 is either blank or Free
List 2 starts in D2, E2 is either blank or Free
In column G, from G2 i want it to list all values from List 1 and List 2 where their status is Free
I have values in Worksheet 1, spread over A1:D25 and A200: D250.
In worksheet2 I have values again from A1:D25 and A200:D250.
Is is possible to only get the unique values of those 4 ranges with the advanced filter? They all need to be shown in eg worksheet 3 starting in A1, (so kinda merged in a sense)?
Is that a thing more for a UDF, or is there a excel function/option that does exactly that?
I have been looking for ages for that kind of function/option, since I thought it must be possible. But this sure does not look to be a standard functionality, or is it?
Is there a (free) add-in that might do this kind of thing?
I found this code on some office help page:
Sub SortAllRangeData()
' Place column header for temporary sort area.
Range("IV1").Value = "Numbers"
It kinda does what I needed, but it lists the actual data in the same spot it used to be. I want to be able to list the sorting in a different column on a different sheet and in 1 column only. Is this difficult to modify so it becomes a UDF or is this something totally different?
I am using Excel 2010. I created a macro to fill a report. Each section of the report is a department, each department has 53-55 (I forget the exact number) lines underneath the department number. So in the macro, for each department I am trying to use the code block
Code:
If Not IsNothing Then
If WorksheetFunction.CountA(Cells) > 0 Then
LastRow = Range("D60:D114").End(xlUp).Row
[Code]....
The font in red is the variable range. The first department has Range("D58").End(xlUp).Row for example. When I run the second department, it finds the empty cell under the first department's section. For example: I go to run the second department with the range of D60:D114, the cell that is selected by the "Address = "portion of the code is D10, because D4-9 has information in it.
What I need is for it to see that D60 (or D61, etc) is empty and paste the copied information into that cell. I am trying to find a way to do this without using "If cell D60 > 0 Then Activecell.Offset(1,0)", because this is a yearly report being filled in every week.
Using excel 2010: I am calculating a dollar weighting with one isolation factor, the state where the sale took place. My current formula is below. Each dollar amount in AG3:AG2000 has a corresponding weighting in AB3:AB2000. The results are isolated by the corresponding state in the range E3:E2000.
I want to add in an additional isolation, the month when the sale took place. The months are located in H3:H2000. Where in my current formula would I insert the isolation for the month?
=SUMPRODUCT(--(Sales!$E$3:$E$2000='2013 NB'!S8),
Sales!$AG$3:$AG$2000,Sales!$AB$3:$AB$2000)/
SUMIF(Sales!$E$3:$E$2000,'2013 NB'!S8,Sales!$AG$3:$AG$2000)
I am using Excel 2010 and I am trying to average the amount of days in a month to a daily average per person in my worksheet.
Total sales per person
A5 = 10 - This is the Grand total per person for column A
A6 =4
A7=6
Daily average per person
C5=2.6 - Average for all persons here
C6=2.0
C7=3.0
The formula I am using is:
=(SUMPRODUCT($A$6:$A$15,C6:C15))/$A5
Which gives me an answer of 2.6 in cell C5 as shown above which is what I am wanting.
Please note that my cell range for my staff goes from 6-15 for both Column A and C where the other cells are blank in both columns.
My question is, If I was to clear all the data in both Columns A6:A15 and C:6:C15, cell C5 would return to a #VALUE. How to I change the formula so that if the cells were Blank, cell C5 would also be blank until I enter data for each person again?
Using Excel 2010.
I am trying to come up with a formula that will return a total average from two columns of dates with criteria. The range will need to cover an entire column as my data is continuously growing and the criteria would have to limit the start date to each month. I have tried
=AVERAGEIFS(DAYS360(A:A,B:B),A:A,">5/1/2012",A:A,"5/1/2012",A:A,"
I have got a table with data from 2005 to date, (for example) For the purpose of what I am doing I need a column which shows date ranges between September 2005 - August 2006 to show as 2005/2006, then September 2006 - August 2007 to show as 2006/2007. I have done some research and seen that, Potentially, a nested 'IF' can be used but it can only be used 7 times which would cause a problem going forward....
Is this the only way or is there a better way (without using VB)?
I am using Excel 2010
I'm using Excel 2010. I have a spread sheet with sales data covering 3 years and multiple customers. I was able to create formulas such as this to calculate the figures for the entire sheet (all customers) by year.
=SUMIFS(J2:J12904,E2:E12904,">12/31/11",E2:E12904,"<1/1/13").
I believe that in order to use filters that show this date for a specific customer I need to convert this to a SUMPRODUCT formula, I've tried this multiple times and had no luck.
I have two workbooks I am using. Essentially I am copying values out of one workbook, opening a second workbook, manipulating data and pasting it. Everything is working great but one issue! The first workbook has named ranges in it that I don't want in the second workbook (just values). I don't want them because when I try this operation the second time it asks if I want to use the same name or choose a different name. For some reason it is still copying over all the named ranges (all 343 of them!). Is there a way to not allow it to do that or simply just delete the names before I close the second workbook?
Win 7 64, Office 2010
Sub CopytoDB()
Application.ScreenUpdating = False
Worksheets("Setup").Select
Range("A2:A766").Select
Selection.Copy
Workbooks.Open Filename:="D:Server MirrorDatabaseSetup Database.xlsm"
Worksheets("Database").Select
Columns("E:E").Select
Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
[code].....