Excel 2013 :: Pivot Table - Adding Rows With Zero Values?
May 28, 2014
I have some nominal data that I'd like to get into a pivot table (Excel 2013). For simplicity let's say it's a one-question survey with 6 respondents:
Q1: Dogs are better than Cats
Strongly Agree
Agree
Neither Agree or Disagree
Disagree
Strongly Disagree
Responses:
Agree
Strongly Agree
Strongly Agree
Strongly Agree
Agree
Strongly Agree
I can create a pivot table with this data and get the following:
Row Labels
Count of Q1
Strongly Agree
4
Agree
2
Grand Total
6
This all works nicely, however I require that the other options ("Neither Agree or Disagree", "Disagree", and "Strongly Disagree") be present, even if their values are 0, like the following:
Row Labels
Count of Q1
Strongly Agree
4
Agree
2
Neither Agree or Disagree
0
Disagree
0
Strongly Disagree
0
Grand Total
6
What I tried doing was adding a new column and calling it something like Ratings with the following:
Ratings
Strongly Agree
Agree
Neither Agree or Disagree
Disagree
Strongly Disagree
Then I set the Ratings column in the "Rows" section of the pivot table and the Count of Q1 column in the Values section. This is what happened:
Row Labels
Count of Q1
Strongly Agree
1
Agree
1
Neither Agree or Disagree
1
Disagree
1
Strongly Disagree
1
Grand Total
6
View 4 Replies
ADVERTISEMENT
Jun 18, 2014
vba in excel 2013 pivot table that updates from an online CRM rows are a to h and it can be any number of rows. What I am trying to do is track progress. In column f values indicate probability for success 10 25 45 90, which can go up or down. The pivot table is refreshed to get the latest values from CRM. the update is handled by a connection to the crm not in the vba.
So far I been researching methods to conditionally format values that went up, down or remained the same since the last refresh with up down and across arrows. I have managed to piece together what I think should work but alas it is not. So I have come to you internet.
My code first clears any formatting and goes down the column avoiding null or empty cells, comparing the values in column f to values in column j.
I have 3 conditions greater than, less than or equal to, and would like add an icon for each based on the result of the comparison.
Finally when it finishes the column the code copies the current values in the pivot table column f to column j outside the pivot table which i hope to be able to hide once the cf works. The code is below
[Code] .....
View 1 Replies
View Related
Jun 5, 2014
I have a pivot table like the one below.
What I would like to do is filter the drill down keeping the total of the products (in bold) and showing just one of the name (just ENTA for Example).
Basically I would like to add a filter that Hide some of the data keeping the row total.
I'm Using Excel 2013.
Products
Sell out 4 weeks
Stock Units
Avg 4 weeks
Wks of stock
3160-24PC-AP12
1
[code].....
View 1 Replies
View Related
Apr 1, 2014
Using Excel 2013,
I clicked on a field in my RowLabels
I then clicked on the Filter Arrow for the RowField
The SelectedField prompted with the correct field of 4 possible fields
However the item I am looking for is not in the list but I can plainly see it on the screen.
View 3 Replies
View Related
Apr 21, 2014
Using Excel 2013.
I am trying to get DistinctCount from a field if another field in the same table is greater than zero.
PowerPivot DAX -COUNTIF
[Code] .....
The count returned includes all not just values greater than zero. How can I get just values greater than zero?
View 1 Replies
View Related
Feb 21, 2014
I have several competitors balance sheets (around 15), they all have the same structure, what i will like to do is summarize all this data into a pivot table to have a grand total but also be able to filter the data by single competitor.
I have tried to do multiple consolidation ranges, power pivot, pivot but i was unsuccessful, maybe i arranged the data wrong or im not using the right solution. im using excel 2013
View 2 Replies
View Related
Aug 6, 2014
Is it possible to perform average function on subsequent group of rows and make a new set of rows ?
For example: As below, in column 1 the average of values of first 3 rows (i.e, 1, 2 & 3) is 2. similarly average of values in next 3 rows (i.e, 4,5 & 6) is 5 and so on....
Is this possible to get a new set of rows by averaging values of rows from a particular column. without applying average formula in each row of column 2. i m using MS Excel 13.
Column 1 ______ Column 2
1 _____________ 2
2 ______________ 5
3 ______________ 8
4 _____________ 11
5
6
7
8
9
10
11
12
View 4 Replies
View Related
Mar 17, 2012
I am trying to add columns to my Excel 2010 Pivot Table to calculate % change of sales from year to year. The field name is "Year", while the item columns in the field are 2007, 2008, 2009, 2010, and 2011. How do I add a column between the years that will calculate the % change os sales up or down from the previous year?
View 2 Replies
View Related
May 31, 2013
In Excel 2007 is it possible to filter the "Values" in a Pivot Table?
I am tracking the Gross weight of shipping containers. My table sums the weight of all items in a container by container number. So my rows are 9 digit container numbers and my data values is a Sum of part weights. I want to be able to filter out containers above a certain weight.
for example:
Row Labels Sum of Gross Wt. - Lbs
10003150588929
10003153258700
10003155984958
1000315651530
10003156549761
I know I can simply copy and paste into a new tab and sort it there, but I'd like to be able to do it internal to the pivot table if that is possible.
View 3 Replies
View Related
May 13, 2003
I have a Pivot Table with pivot fields and data. I would like, through VBA, to get the list of values that can be chosen from a given pivot field.
For example, a list would be Product1 / Product2 / Product3 .... I would like to read that list and put it into a drop down list in a form.
GOAL: I have several Pivot tables on the same sheet with similar fields and I want through macro to allow the user to update them all with one click.
View 9 Replies
View Related
Jun 21, 2014
I'm trying to produce a fixed format pivot table in Excel 2010. Normally I'd just construct a manual table using COUNTIFS, SUMIFS etc, howver, for this exercise the requirement is to be able to click on any field and have a tab pop up with the relavent data a la Pivot Table. But....I need the Pivot table to have a fixed format (which I can do with 'Preserve cell formatting on update') and to have all of the rows and columns in irrespective of whether there is data or not (i.e. if I haven't sold any apples in June, I still want the 'Apples' field to appear, just with a value of zero). I had assumed that the option I needed was 'Show items with no data on rows/columns' but these options are greyed out. I've tried right-clicking on the whole table, on individual fields and on labels but still get the same greyed out options.
Is there any way I can retain all of the rows and columns?
View 1 Replies
View Related
Feb 17, 2010
I have a pivot table based on a large dataset within Excel itself. The dataset looks as follows:
View 9 Replies
View Related
Jun 20, 2014
I have data set up like the example but then for 1797 lines.
D39BKYes
D39BKYes
D39BKYes
D39BKYes
GHFLBNo
R80FANo
R80FANo
[code].....
What I need to get in a pivot table is: two columns or rows (Yes / No) and the unique count of the code.In this case is should show Yes: 2 and No: 3
View 2 Replies
View Related
Feb 13, 2012
I am trying to have duplicates and their corresponding data appear in my pivot table. Assume I have a list of over 1000 stores. Let's say store 101 appears twice in my data file.
When I create my pivot, the 101 only appears once and the data is consolidated. Is there a way to ungroup/display duplicates?
View 2 Replies
View Related
Jun 21, 2013
How do count unique values in category in pivot table. (my table, im taking data from ms query). I am using excel 2010
Pivot table example: the result i want is the "no of types" as my data only show "category" and "types".
Category
Types
No of Types
Fruits
Apple
Pear
Orange
3
Vegetable
Cabbage
1
View 4 Replies
View Related
Jan 17, 2014
I have a pivot table which has a report filter. The report filter can have anywhere from 20 to 350 values. The user will be able to select multiple values from the listing to produce the table as needed. I would like to be able to display what values were selected in the report filter so that the user can see this information once the pivot table is rendered. Is there any way to display this information either above below or along side of the table itself?
I am using Excel 2011 for Mac, but I also have access to Excel 2011 for Windows. Either way will work. I have been able to get quite a bit of what works on Windows to work with the Mac.
View 1 Replies
View Related
Apr 17, 2014
I'm on Mac using Excel 2011. This means I don't have "slicers", which is all my Googling kept turning up.
I have a pivot table with 4 different value columns, and I want to be able to filter it the same way you would a normal table - i.e. remove everything below a specific number in one column, and filter for only specific strings in another column, etc.
View 9 Replies
View Related
Jan 20, 2014
I am using a pivot table in excel 2010. 15 columns (fixed) and plenty of dive downs for rows.
I am trying to 'hide' all of the rows containing values less than 10. If it is easier we can start with hiding values of zero and go from there.
It is key to hide the rows as within the dive downs the rows within the pivot are to many to sort through. If there is a way to do this using the grand total columns for each row that would work as well. Just to be clear I need to hide the entire row not just report the empty cells as zeros. If any further detail is needed feel free to ask.
For example: If value of column O "Grand Total" = 0 'hide rows with value 0' ELSE 'display rows with value greater than 0'
View 4 Replies
View Related
Jun 13, 2014
In excel 2010, I'm using the following to copy and paste values and formatting from a pivot table, but i lose the formatting (TableStyle2 = "PivotStyleLight8"):
VB:
Selection.CurrentRegion.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
I have tried to add, xlPasteFormats, but to no avail...?
View 4 Replies
View Related
Jul 19, 2013
Is there is some way to filter based on the value in a specific subcolumn.
Using the example of a list of salespeople and their transactions over the year, who sell multiple products, the PT is Sales Person name for the Row Labels, and Type of Product for the columns. The resulting PT has 3 columns, for each of the products - e.g. table, chair couch, and the Values are the total number of that item sold. Is there any way I can filter, so that I will see only those sales people who have sold 3 tables or more lets say. (Thus enabling me to quickly see what other products those sales people have sold.)
(The actual situation is a lot more data heavy than that - it is actually a list of donations for a non-profit, coming in from hundreds of people, across a dozen different categories; I am trying to analyse the extent to which people who gave for a particular category (Direct Mail solicitation) also gave across other categories.
So far I've manipulated things by inserting a '% of row total' value into the PT and then using countif/sumif functions outside of the PT to figure out how many people donated solely to this category (= 100% of row total), and how many donated to other categories too (= more than 0% of row total, less than 100%), which gives me a decent summary of sole donations to this cause vs other categories too, but doesn't visualise what the actual other categories donated to were. I've also investigated making a PT of the existing PT, but I'm not sure if that's even possible...)
(I'm using Excel 2011 for Mac, but if there's some other version that would make this possible, I may be able to use another computer.)
View 1 Replies
View Related
Mar 19, 2013
On a worksheet, I created:
- a list of data
- a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
View 3 Replies
View Related
Apr 6, 2014
In Excel 2013, I have a pivot table showing the deals that our sales team are trying to close during this Qtr. and how much revenue we hope to get from those deals during this Qtr, next Qtr and beyond. The FILTER area of the pivot table is used to select the current Qtr.In the ROWS section, I set the "Deal ID" field with a value filter to Top 10 items by current Qtr revenue.
Data is refreshed weekly.
At the start of the Qtr, this works perfectly.
Towards the end of the Qtr, (when there are less than 10 deals with revenue this Qtr, and lots with 0), the "Top
10" filter is showing all the deals with 0.
How can I filter a pivot to show items that are >0 AND Top 10?
View 1 Replies
View Related
Feb 28, 2014
Is there a macro available which will create a pre-defined name for a pivot sheet, which will contain the word "Pivot" followed by a underscore "_" and the name of the sheet on which the pivot is applied.
Example: I have data on a sheet called "Salary" and put a pivot on "Salary" on a new sheet, the new sheet should be auto named as "Pivot_Salary"
Am using Excel 2013
View 1 Replies
View Related
Apr 17, 2014
Using Excel 2013.
Trying to create a Calculated Column in a table to put Expense in 1 of 4 categories
I came up with =CALCULATE(sum([TotalExpense]),FILTER(factExpense,factExpense[ExpnseType]="Sundries"))
But that is returning total instead of a total for each record What did I miss?
This works for the first Calculated column: =CALCULATE(sum([TotalExpense]),FILTER(dimExpense,dimExpense[Type]="Sundries"))
But as soon as I copy the formula to the next column and update the type to "Wines_Spirits" I get
A circular dependency was detected
Found the answer on SQLBI website I added a unique id to each row and in Table Behavior in the Data Model set the Unique_ID as the Row_Identifier
[URL]
View 1 Replies
View Related
Jul 24, 2013
I have 2 columns with a list of competitors (competitor 1 & competitor 2) involved in a negotiation + the price/value of the negotiation. Each line represents a negotiation with a value in numbers & the names of the 2 main competitors involved.
I have around 150 lines in the original file and would like to show in a graphic what are the competitors that we regularly find in the negotiations and what is the value of the negotiations they are involved.
The problem is that there is no main competitor so i can find the same name in any of the 2 columns and i cannot make separate graphs for each column because if i do so i duplicate the value.
Is there any way that aggregate this info into a single graphic/pivot graphic? Im using excel 2013
View 2 Replies
View Related
Jun 8, 2012
I recorded a macro to make a pivot table. It doesnt seem to work when i re run it... it is either...
Pivot table 4 (maybe its already been used... can i somehow say next avalibale name? ie pivot table 4, pivot table 5 , 6 , 7 and so on?)
or...
I dont have 5000 rows, but i don't know how to specify that is should only inculde rows were Col A has a value
Code:
ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _
"damien test!R2C1:R5000C6", Version:=xlPivotTableVersion12).CreatePivotTable _
TableDestination:="Sheet1!R3C1", TableName:="PivotTable4", DefaultVersion _
:=xlPivotTableVersion12
View 2 Replies
View Related
Jul 16, 2014
I am trying to average different rows and columns within a larger block data set in a series. This data is from a 96-well absorbance microplate reader experiment. I only mention this to describe the raw data output I am dealing with.
Each set of data is in a 12 x 8 block with the next block below it with one blank row between. So I have a block of data contained between A1->L1->L8. The next block is contained between A10->L10->L17. This continues for a total of 28 blocks.
I want to take averages from rows or columns from each block and autofill them into a single column. So for example I'll need =Average(A1-C1) with =Average(A10-C10) below it and so on and so forth. My problem is that if I try to autofill from this already started column the third row will take the average of A2-C2 instead of A19-C19.
Is there a formula/script for me to skip the correct number of rows to the next data block?
I have attached my spreadsheet to this thread. I am using Excel 2013
FeS_Kinetics.xlsx
View 1 Replies
View Related
Feb 7, 2014
I just discovered forms in excel and loving what custom functionality you can create with it; however, I need to include a table into the form but I've come to a road block. I don't see a way possible to render data from a query into a table inside of a form.
PS - I'm using Excel 2013
View 1 Replies
View Related
May 14, 2014
I am using excel 2013. I have the table look like the above, in the diagram 1, i want to have the macro such that it can be formatted to the 2nd diagram. Can this be done using macro ? [URL]
View 2 Replies
View Related
Jul 5, 2014
I have two fields in pivot table, "HATA TOPLAMI" and "SIRA NO". "Hata toplamı" is sum of items, and "Sıra no" is count of items. İ want to divide these two fields and add it to the pivot table, like "HATA TOPLAMI" / "SIRA NO". I have tried calculated field function from pivot table. İ wrote "="HATA TOPLAMI" / "SIRA NO"". But the summary is false. I want to divide Sum of "Hata toplamı" and count of "Sıra no" but instead it divides with sum of "sıra no". Is there a way to do this?
View 3 Replies
View Related
