I have linked Combo Box to Pivot Reporting Filter through VBA. When I Select Combo Box Value, same will be filtered in Pivot table. Combo Box values are constant where as Pivot report filter may not contain all the values which are in Combo Box. If Combo Box value is not available in Reporting filter of Pivot it should throw up msgbox and should select first value of Combo box.
View 3 RepliesI've prepared an excel file with a pivot table. Now I would like to change the Pivot "Report filter" by using combobox on userform.
Sample Data
ID
NAME, INIT
GENDER
DEPT
SALARY
DOH
LOCATION
RAISE
1
Smith, J.
F
Sales
$41,250.00
2/2/1982
Boston
$45,375.00
[Code] .....
VB:
Sub CreatePivot()
Dim objTable As PivotTable, objField As PivotField
ActiveWorkbook.Sheets("Employees Data").Select
Range("A1").Select
[Code] .....
Error:
Private Sub ComboBox1_Change()
ComboBox1.Value = objTable.PivotFields("DOH")
End Sub
I've prepared an excel file with a pivot table. Now I would like to change the Pivot "Report filter" by using Textbox on Userform. I've attached an excel file as an example.
View 2 Replies View RelatedI operate a small music management company and I run my accounts using relatively complex Excel Workbooks with different sheets for purchase and sales ledgers, cash in and cash out etc etc. Each financial year has its own workbook. My problem is creating financial reports. For example, if I need to create a report for outgoings and incomings relating to a particular project (a concert tour for example), and if that project was split over several financial years, I find myself spending hours creating pivot tables, and then pivot tables based on other pivot tables etc etc, to just get a clean report on that particular project. What I would love to have is a single report generating system, where I can just enter the name of the project, and get a financial report at the click of a button, based on all the raw data I have painstakingly entered in the individual workbooks and sheets. I reckon I'm too busy to sit down and tackle VBA programming myself, so I wondered if anyone knew of any third party software that might help me realise my dream simply and easily. Someone has already mentioned Crystal Reports, but I don't know whether this will be overkill.
View 3 Replies View RelatedI have a table of data and would like to filter it based on the combo box selection so that only those results which match the combo box are displayed.
E.g.
WARD
MONTH
YEAR
[Code]....
WARD, MONTH, YEAR will be combo boxes through which the records below will be filtered.
I want to attach a sample but not sure how to
I have a pivot table in Office 2007. I want to filter the last column such that the values in the data area are greater than a certain number. But all those filter options are grayed out. The only option available (and working) is to select the top n entries. So clearly a reference into the data field to filter a column works, but why not by value?
View 9 Replies View RelatedI have a pivot in excel 2007 but I have the following problem; I want to exclude values from one variable that have a value lower than zero or blanks:
Month #AVG Employees
Jan 200
Feb 171
But the problem is, if i filter on the variable by placing it in the Report filter (select multiple items to remove blanks and -999), when i refresh the pivot next time for the new month it won't add the new values for the next month. How to have the filter so it applies the criteria but allowing new values in for the next month.
In Excel 2013, I have a pivot table showing the deals that our sales team are trying to close during this Qtr. and how much revenue we hope to get from those deals during this Qtr, next Qtr and beyond. The FILTER area of the pivot table is used to select the current Qtr.In the ROWS section, I set the "Deal ID" field with a value filter to Top 10 items by current Qtr revenue.
Data is refreshed weekly.
At the start of the Qtr, this works perfectly.
Towards the end of the Qtr, (when there are less than 10 deals with revenue this Qtr, and lots with 0), the "Top
10" filter is showing all the deals with 0.
How can I filter a pivot to show items that are >0 AND Top 10?
I have created a pivot table in Excel 2010 that lists amounts used of particular items each month. Inside the pivot table value field settings i have changed the show values as field so that it displays the difference in usage from this month to last.
However if i now select a top 10 filter it only filters by the total number used as opposed to the difference in usage from one month to the next (which is the values displayed).
Is there a way that i can filter by top 10 by the actual values displayed in the pivot chart and not just the underlying data that creates it?
I have a pivot table that I want to update via VBA based on dates user inputs on an input tab. (Want to use the Between function)
The Date field is in the Report Filter section (as I don't want it in the row or column area), but when I click on the dropdown arrow, I don't get any option to filter the date at all. I've double checked that the dates in my datasource are formatted for a pivot table, but that doesn't seem to be the issue.
When I use code I've found on this and other sites, it also doesn't work. When I run it, I get the following error at the "If Date DateValue(PI.Name) < StartDate Or DateValue(PI.Name) > EndDate Then..." line
Error Message: Unable to set the Visable Property of the Pivot Item Class
Code:
Sub Test()
Const StartDate As Date = #1/15/2013#
Const EndDate As Date = #2/13/2013#
[Code]....
In Excel 2007 is it possible to filter the "Values" in a Pivot Table?
I am tracking the Gross weight of shipping containers. My table sums the weight of all items in a container by container number. So my rows are 9 digit container numbers and my data values is a Sum of part weights. I want to be able to filter out containers above a certain weight.
for example:
Row Labels Sum of Gross Wt. - Lbs
10003150588929
10003153258700
10003155984958
1000315651530
10003156549761
I know I can simply copy and paste into a new tab and sort it there, but I'd like to be able to do it internal to the pivot table if that is possible.
I have a pivot table which has a report filter. The report filter can have anywhere from 20 to 350 values. The user will be able to select multiple values from the listing to produce the table as needed. I would like to be able to display what values were selected in the report filter so that the user can see this information once the pivot table is rendered. Is there any way to display this information either above below or along side of the table itself?
I am using Excel 2011 for Mac, but I also have access to Excel 2011 for Windows. Either way will work. I have been able to get quite a bit of what works on Windows to work with the Mac.
I'm on Mac using Excel 2011. This means I don't have "slicers", which is all my Googling kept turning up.
I have a pivot table with 4 different value columns, and I want to be able to filter it the same way you would a normal table - i.e. remove everything below a specific number in one column, and filter for only specific strings in another column, etc.
I have a pivot table like the one below.
What I would like to do is filter the drill down keeping the total of the products (in bold) and showing just one of the name (just ENTA for Example).
Basically I would like to add a filter that Hide some of the data keeping the row total.
I'm Using Excel 2013.
Products
Sell out 4 weeks
Stock Units
Avg 4 weeks
Wks of stock
3160-24PC-AP12
1
[code].....
I'm Using Excel 2007 and would like to have some VBA to work with the following!
I have a simple pivot table (PivotTable1) in Sheet1 with three items in the Report Filter which has been named "ROUTE"
I have created a ComboBox in Sheet2 and have added the identical three items in via format control, cell link A1.
I would like to be able to use the combobox in sheet2 to operate the PivotTable Report Filter in Sheet1 as I would like to build a report whereas a user. Can only select the comboBox and does not see the pivotTable
Sounds simple but cannot get this to work no matter what I try.
Using Excel 2013,
I clicked on a field in my RowLabels
I then clicked on the Filter Arrow for the RowField
The SelectedField prompted with the correct field of 4 possible fields
However the item I am looking for is not in the list but I can plainly see it on the screen.
In Excel 2010; the pivot Tables drop down filter is limited to 10,000 records. if more than 10,000 are available then a message saying "Not all items showing" is displayed at the bottom of the list.
Clickin on the message would display a window saying: "This field has more than 10,000 items under one or more parent items. Only the first 10,000 items are displayed under each parent item."
In the coming months the company i work for will be transferring from Excel 2003 to Excel 2010 (i know, a little late......) and now i am testing some things at home.
We deliver lots of Excel reports to our clients where we are using Pivot tables. In excel 2003 we where able to hide items from the dropdowns using properties - hide items but when i now open an excel 2003 file in excel 2010 and want to filter the pivot table to (let's say) another month i see all my hidden items.
Is there an option in excel 2010 to hide items like i could do in 2003? (either regular option or VBA)
I have a perfectly working pivot table and I would like to make some graphs based on the report filter. My report filter has 4 categories, with each more than 10 sublevels.
When I make one pivot graph/chart, this goes fine, the data is ok, and I am happy. But one I make a second, and thus adjust the report filter, the first graphs changes according to the filter. I dont want that to happen
Ultimately I would like a powerpoint presentation with multiple charts, based on one table, with different report filter filters. Updated ONLY on the values, not the filter.
I am looking for a formula or VBA code that will allow me to Select a Team leaders name and all the agents reporting to that team leaders would populate. I have the first part of that problem solved but its getting the agents names to generate uniquely that I find problematic.
Below is a step by step example of how i intend it to work
Step 1
I select the Teamleaders name
Shelaine
Once that has populated the Team Names automatically appear
Shelaine
Score
Andrew
20%
John
30%
Mark
40%
Sarah
50%
June
60%
The scores will populate on its own as I will include a Vlookup formula to generate the scores, Its just the Agents names. I am using Excel 2007
Any way to create a calculated field in an Excel 2010 pivot table that will find all the Transaction Types (Report Filter) with "transportation" in them and make the field Quantity 0 and leave all other quantities the same? I do not want the quantity of transportation added in twice and may not have the flexibility of adding a column to the raw data.
I used the formula below in a calculated field and it does not match the values using the added column to the data file.
=IF(ISERROR(SEARCH("*transportation*",'Transaction Type')),Quantity, 0)
I am trying to get the sum of Quantity field to equal the AdjQuantity field using a calculated Pivot field and not add a new column to the data.
I have a set of four pivot tables on a sheet that I need to programmatically change a Report Filter (Page Field) so I can create sets of reports in an automated fashion. This will be the first step in that process. The change will involve choosing > 1 Role each time the code loops through based on Named Ranges I've defined that are associated with that Role.
My code thus far:
Code:
Sub TestCode()
Dim pt As PivotTable
Dim pf As PivotField
Dim pi As PivotItem
[Code]....
emm_dc_gsr is one of many Named Ranges that will contain a variable number of elements. Just using the one right now to see if I can get the code to work, I'll eventually make another Named Range/Array of all them so I can loop through each Report ("ReportPick").
I want the Report Filter to consult that Named Range for its values and apply those values to PivotField "Role" that is used as a Report Filter.
When running this code above, I get a "Role" Field that says "All" but no values (the table is completely blank), with no evidence as to why it'd be blank (all filters in every Report, Column and Row are working normally and are filled in). When I choose a value manually after the code is run, the pivot table values populate. Do I need to somehow index the Named Range in that loop? I'm just confused about this step right here:
For Each pi In pf.PivotItems
If pi.Value = RolePick Then
pi.Visible = True
Else: pi.Value = False
When I've run other versions of the code, I've gotten an array version of it to "work" using LBound and UBound, but it never chooses the right two values even though those are verified as stored in the array via a pass-through. It chooses the first few values in the Report Filter.
Here's the corresponding code for that:
For i = LBound(myArray) To UBound(myArray)
pf.PivotItems(i).Name = myArray(i, 1).Value
pf.PivotItems(i).Visible = True
Next
I do not care if I use an array or a Named Range. I just want something that is simple and works. Passing the values directly from the named range seems easiest to my brain, but I'm open to anything and I'm clearly missing something (probably silly).
I also have no idea why " .AutoSort xlManual, .SourceName, .EnableMultiplePageItems" is necessary though every piece of sample code I've seen seems to have some variation of it.
(Using Excel 2010, Windows 7.)
I am a Microsoft Excel 2010 user and am trying to create a usage report for a website that I work on. I have been compiling the usage reports into one spreadsheet. The columns I use are Month, Device, Language, Title 1, and Title 2. I can filter each of these rows and it shows me the number of records found. Each row on this spread sheet refers to a time that someone selected something on the site. For example the row may say;
Month (filtered)
Device (Filtered)
Lan (filtered)
[Code].....
How do I automatically populate a table on a separate sheet with the number of records found for a certain combination of filters applied. So if I'm looking at monthly trending I want to know how many times the stress test was started in May, June, or July, but automatically using info from the multiple filters.
What is a formula I can use to compile the filtered data from above.
Jan
Feb
Mar
Aprl
May
Start
=formula?
I have this problem which I have simplified below:
Sheet 2 contains a Pivot table. One of the report filters is "Month-Year" (Eg, May-14 - in date format 'mmm-yy') which is selected by a Slicer on sheet 1.
Cell D1 on Sheet 2 contains a formula which calculated/displays the mmm-yy of the same period last year (eg May-13).
I want a code so that when I select the 'Month-Year' Slicer to filter the pivot table on Sheet 1 (eg to May-14), another Pivot on Sheet 3 is filtered with the previous year mmm-yy (May-13).
I have 2 comboboxes on a userform. In combobox1 I have a list of years which is pre-populated. In combobox2 i have some data. What i'd like to do is to sort combobox2 using the year selected from combobox1.
I have tried this slightly modified code from a different project, but cant get it to work correctly.
The code below autofilters, and selects the correct range, but will not populate the userform combobox... the highlighted row seems to be the problem:
Dim rngToCopy As Range
With Sheets("Project")
.AutoFilterMode = False
.Range("B:B").AutoFilter field:=1, Criteria1:=ComboBox6.Value
With .AutoFilter.Range
On Error Resume Next
Set rngToCopy = .Offset(1, -1).Resize(.Rows.Count - 1).Resize(, 3)
On Error GoTo 0
If rngToCopy Is Nothing Then MsgBox "No projects currently set up for the selected season!...": Exit Sub
End With
rngToCopy.Copy Destination:=UserForm5.ComboBox2.List
.AutoFilterMode = False
End With
In my data, i'd like to return columns A, B and C.
My goal is to be able to use a combo box on a userform to filter a spreadsheet. I need my users to select the dropdown arrow on the combobox, find the one value they need out of a list of about 50, and have the spreadsheet in the background filter based on that user selection. At this time my form has several checkboxes to filter the spreadsheet which works as expected but again, I think I need to use a combobox for this certain set of data in conjunction with the other checkboxes. Searching on the more obvious terms leads to lots of advice and code on how to filter results within a combobox, but not how to use a combobox to filter a spreadsheet.
View 2 Replies View RelatedI am trying to filter a list for a ComboBox using VB.
I have the following
Defined Name 'MemMapSel'
1stCol 2ndCol 3rdCol 4thCol 5thCol
Alarms a BOOL 2001 4000
Commands i BOOL 4001 5000
Status s INT 7001 8000
Free x DINT 9001 10000
etc
etc
I am using a combobox to select which row i require and am mapping the 4thCol to a cell
At present the property 'ListFillRange' is set to 'MemMapSel' displaying all 5 columns and bounding column 4 as the value
What i really need is to Filter this list, so that the combobox only displays the BOOL entries in the 3rdCol, or the INT, etc
I think i can use the Select function to do this, but i am not sure how to go about it.
I want to filter my results using a combo box on my spreadsheet. I don't mind how this is done, even if it just hides all of the information which isn't relevant. I've done it with a VLookup but I want to be able to edit it easily without the formula popping up. So if you click Barlcays, only barclays appears. I'd also like a button to reset if possible. I've attached an example of how I sort of want it to work.
View 3 Replies View RelatedIs there a way to filter a listbox from the selection in a combobox?
View 2 Replies View RelatedI am trying to use a combo box with a defined list I have in another worksheet.
I was able to name and populate the list into the combo box, but am trying to work a macro into it.
I have a large data sheet with with many columns. In this worksheet, I also placed the combo box. What I would like to do is to be able to click on a name in the combo box and have it filter Column H, where there are many data points.
For example, In column H I have Apples, Watermelons, Peaches, etc.
In the combo box list, I would like to click on Apples and Column H list only the Apple names. Then if I want to click on Watermelons, it would filter Column H to only those which have Watermelons listed...