Excel Spreadsheet - Tally Number Of Votes For Particular Artist Work
Mar 14, 2014
We want to create an excel spreadsheet that will tally the number of votes for a particular artist's work. There will be about 150 artist's works that will all be assigned an individual number from 1 to 150 on an excel sheet.
We will have about an hour to complete the counts to determine winners, so a short time frame.
Is there a way of creating a formula/macro in one cell -to just enter the number of the artist's work that was voted for- and have it placed as a tally against the individual piece?
View 3 Replies
ADVERTISEMENT
Aug 16, 2008
Her situation is that she would like to be able to tally all the work orders that are created and either completed or pending. According to what she tells me she usually spends hours tallying the monthly worked on orders manually....
View 15 Replies
View Related
Aug 19, 2013
Maybe it is the layout but I was trying to keep it simple and just put hours into a cell for each employee.
I have 2 employees per day, one in the morning and one in the evening. How to get excel to add the hours for each employee at the bottom per month. Simple right?
Here is an example of what I thought would be so easy (first week in excel spreadsheet format)
sun mon tue wed thu fri sat
emp1 5 emp3 6 emp5 5 emp1 4 emp3 5 emp5 5 emp1 6
emp2 5 emp4 5 emp6 5 emp2 5 emp4 5 emp6 6 emp2 6
Is there a way to associate cells to look at values for each employee and add all the cells for the month?
View 5 Replies
View Related
Jun 20, 2014
I am trying to create a spreadsheet that will automatically increase the work order number by 1. The cell will always be in the same place. The idea is that when the file is opened it populates the number. After being closed and reopened the number will be 1 higher than the previous.
The page will reused by various people to create and print work requests for my mechanics, I want it to assign the W/O automatically.
View 11 Replies
View Related
Jan 11, 2009
i need to work out a formula for my spreadsheet which I use to work out cutting lists for timber frames. I need it to work out if the width of a job is for eg 2400mm i need to work out how many timber studs I need so the space between each stud is between 400mm and 500mm and this will need to work for a range of different sizes of frames. I have it written at the moment and it just devides the width by 400 and gives me a amount of studs but it would work much better if it could space them between 400 & 500.
View 4 Replies
View Related
Aug 25, 2009
I have a formula that I use to tally data and return the number of times a particular value is present in column C.
IF(COUNTIF($C$2:C2,C2)=1,SUMIF(C:C,C2,E:E),"")
I copy this formula down the sheet until arriving at the last input in column "C".
Can someone tell me how to write this in code. All I would like visible in Column "F" is the output not the formula.
View 9 Replies
View Related
Aug 4, 2007
The spreadsheet has been around for a long time. Even in the electronic form, it has been around for over a quarter century. How has the electronic spreadsheet improved or changed your job?
I'm taking a course in computer applications and will be using any information I get in replies to this thread in my term paper.
View 6 Replies
View Related
Jun 10, 2014
When I copy the dates from this spreadsheet into a new one, in the new spreadsheet the copied dates are different. Looks crazy. Why does this happen?
View 14 Replies
View Related
Mar 20, 2008
Problem: I have textbox entries that are part of a Userform that opens using a macro on a speadsheet button. Once this form is open, I can no longer actively work in the spreadsheets.
Need: I need a way to minimize or "put on hold" the Userform so that I can freely move around in the spreadsheet. This could be in the form of a button on the Userform. Then, I need a way to bring back this userform to the point I was at before being put on hold so that I can continue to input entries into the textboxes (again, a buttton that could bring it back). There should be a way to toggle between both worlds.
View 2 Replies
View Related
May 21, 2014
I created a very simple macro, which actually works.
There is a button on my spreadsheet, so the user can launch the macro using this button.
[ Code] .......
At the moment the user clicks on the button, the part of the macro which is hiding the rows will not take place if the cell activated at the moment of launching the macro is in the range below :
The table on my Excel sheet covers range A5:E49
If the active cell is anywhere in A6:49 or C5:D24 or C25, the hiding part of the macro will not work. Launched from any other cells on the spreadsheet it works fine.
The rest works fine and I am not getting an error.
To solve this I just need to add the line Range("G9").Select and it will work.
But I would like to understand why it does not work from the cells given above. My sheet is not protected and I unlocked the cells just ion case.
View 2 Replies
View Related
Jan 20, 2009
I am having trouble trying to develop a code to include into a spreadsheet for work. It will be a live spreadsheet accessed by a few people who will have control over there own columns in the spreadsheet (2 columns are designated for one project) Each Project director is to edit the info about their project.
So my goal is to put a code in cell C3 that shows the date that cells C4-32 and D4-32 were last updated.
View 9 Replies
View Related
Oct 7, 2009
I developed a 14-day work schedule and I assigned each different job position a number. The different job positions are numbered 1-6 and are as follows: #1=5:30am-1:30pm, #2=6:00am-2:00pm, #3=9:30am-1:30pm, #4=12:00pm-8:00pm, #5=1:00pm-8:00pm & #6=6:00pm-8:00pm. Numbers 1,2,4,5 clock-out for a 30 minute lunch break, while the other numbers do not.
My goal is to insert the numbers 1-6 into the spreadsheet throughout the 14 days for each employee, and have Excel calculate the total number of hours for each employee in the far right column. I would also like "V" & "H" to equal 7.5 hours. This would save a lot of time instead of going through and adding up the hours with a calculator
View 3 Replies
View Related
Apr 9, 2009
I have a spreadsheet that is being used for tracking work completed each day in a week. Each day has 5 columns and 10 rows of data to potentially be entered, some of the data is text and some is numerical. Can anyone help me come up with a formula that will count the text and the numerical entries for each day? I tried to use a nested if statement but it exceeded the number of nestings available. The range of cells for the first group is B6:F16.
As a side question, will count work for a range of data or only one column or row at a time?
View 9 Replies
View Related
Jan 7, 2009
I have a scenario where I am trying to work out on a spreadsheet how many failures I have had according to a traffic light system. If I have 5 or less failures it is considered green, between 6-10 amber and 11 or more red. How can I create a formula under column A that captures which status it is on?
View 3 Replies
View Related
Mar 14, 2007
im using spreadsheet works which seems to be very similar to excel. i am making a table full of numbers and i want to count how many times the number 1 appears and for that amount to be displayed.
View 11 Replies
View Related
Jan 29, 2014
I have been asked to develop a dashboard for my company. The data source for my dashboard is Tally ERP 9.The problem is I am not getting how to access this data into excel. I have tried MS Query but the imported data was not what I was expecting.
View 1 Replies
View Related
Nov 26, 2007
i am currently trying to figure out excel i have to fill this worksheet out daily and then at the end of the month i have to count the total number of items. I was wondering if there was a way to auto talley on a different sheet so that everytime i entered a product name and quantity if on the other sheet it would auto add it in
example:
I ate at mcdonalds (Main sheet)
On 11/22 I had 3 big macs and 4 quarter pounders,
On 11/24 I had 5 Big Macs and 2 quarter pounders
On 11/26 I had 12 Bigmacs and 5 quater pounders
(New Sheet) i want it to look like this:
Product quantity
Big macs (20) <-- this number i want to auto add from the notes made from main sheet)
So on another sheet i want to make a formula where for everytime i type in "big mac" on main sheet that on the other sheet it would auto add or keep a running tally so after i made those 3 entries on the main sheet it would show that i had a total of 20 big macs on the new sheet.
View 9 Replies
View Related
Jan 19, 2008
I need to create a sheet probably involving macros where I enter a numerical value into a cell (say B5) I want the sheet to assign a score to the value I enter and then add the score it generates to a table of values. Once ths is done I need it to automatically clear the original value I entered ready for me to enter a new value - rinse repeat..
e.g.
into B5 I enter 15 - on the right in the results table there are headings v w x y and z
say 15 scores one point for w and one point for z I want the sheet to add 0 to the totals under v,x & y and add 1 to the totals under w and z.
Then I want the sheet to clear cell B5 so I can enter a new value without manually deleting the previous entry.
If I can also copy the value I enter into a "history" which simply lists all the values I enter as I go along so much thebetter.
View 3 Replies
View Related
May 28, 2014
I am trying to add a number to a cell for work breaks. Below is what I am trying to do:
If F3 is < 4 then 0
If F3 is > 4 but < 6 then .25
If F3 is < 6 then .50
View 3 Replies
View Related
Jan 13, 2014
I have a spread sheet I have set up to calculate sales results, I have a column for each week in the quarter with the date at the top and a different page for each individual. I want to be able to enter a number to show how many weeks we have had and the spreadsheet to give me a cumulitive amount for the cells up to that date.
For example if I was to enter 1 in a cell A1 I would want the sum t work out just C3 for example.
If I enter 3 in A1 I would want the sum to be C3+C4+C5 wich is the three cells.
If I enter 6 in A1 it would be C3+C4+C5+C6+C7+C8 etc.
View 2 Replies
View Related
Jun 27, 2008
i want to put a number of graphs on to a work sheet to pringt them out to make it look good. How can i using a macro fix the size of that graph and the location of that graph on the worksheet
View 11 Replies
View Related
Jul 2, 2008
I am using Excel to produce work orders and I need each one to have its own unique number. Much like an invoice or contract number, each time I open the file I would like Excel to generate a new number for that spreadsheet with a value of 1 more than the previous spreadsheet.
View 14 Replies
View Related
Aug 4, 2012
My problem is that my VLOOKUP formula will not return any data when it doesn't like the format of the data it's looking up.
Example: I have a spreadsheet that displays revenues earned by assets.Every month I export a table of data from an accounting software program with (a) asset numbers, (b) invoice date, and (c) monthly revenues.Then I copy the data into Tab 2 of my spreadsheet.On Tab 1 of the spreadsheet there is a table that lists Assets 100 through 120. Column A has all the asset numbers.Each month it varies as to which assets earned revenue and which one's did not. Usually between 10 and 15 assets earn revenue in any given month and about 5 do not earn revenue.On Tab 1 there is a column with VLOOKUP formulas that looks up the asset number in column A of Tab 1 and points to Tab 2 where the data that was exported from the accounting software program is located.Let's say that in July 2012 that Asset 1001 earned $35,000.On certain months, the VLOOKUP formula looks over to tab 2 and "returns" the $35,000 revenue with no problem.On other months, it will not return anything, apparently it does not like the formatting and does not "recognize" the asset number.
View 7 Replies
View Related
Feb 26, 2014
How the like operator works with brackets and # tags etc...
View 9 Replies
View Related
Jun 11, 2009
I have 2 workbooks. and i would like to do the following:
Workbook1
- 4 columns (product ID, quantity, Group, Comments)
Product ID, Quantity, Group, Comments
11111, 500, ?,?
11122, 1000, ?,?
11133, 250, ?,?
11144, 250, ?,?
11343, 700, ?,?
12134, 750, ?,?
Workbook2
- 2 columns (group A, Group B)
for group A:
min qty: 250
min increment: 250........................
1) I need to match the product ID in workbook1 with workbook2 - see which group it belongs and put into workbook1 under column group
2) I need to count the no.of quantity and see if it meet the citeria and place Yes/No in workbook1 column under Comments.
- for example:
product ID 11111 in workbook1 can be found in workbook2 group A (put group A into workbook1 under column group)
do a check: prodct ID 11111 has 500 in quantity, since its under group A it meets the min qty of 250. and followed by it meets the min increment too - 500/250 (thus put Yes into workbook1 column under Comments)
View 9 Replies
View Related
Aug 6, 2007
I have been working on a little vba project and have almost got there with help from others, but the final part needs to have a tally a number of columns and and produce the tally results to a new worksheets - the code that need proof reading /reviewing is below - it is not working correctly as it is not tallying correctly and at times seems to miss counting the last row - so could you review and suggest or make required changes so that it will work on the attached test file.
WHAT IS NEEDED IS;
1. Column D contains names -strings which are repeated such Fred Flintstone so for Fred and others would like to have a summary tally of how many times each worker has instances of a value appearing in columns I, J, K, L and P, R ,S, T and U.
With the output summary worksheet called "WORKER TALLY" and having the headings for each columns tallied from row 5 being headings for each column tally see attached example.
2. Then do same again for Column E - Names so for example the name Peter Pan and others would like to have a summary tally of how many each worker has instances of a value appearing in columns I, J, K, L and P, R ,S, T and U. With the output summary worksheet called "Names" and having the headings for each columns tallied from row 5 being headings for each column tally see attached example.
Sub workertally()
Dim b() As Variant
Dim NewWs As Worksheet
Dim j As Integer, i As Integer
Dim a As Range, v As Range, r As Range, c As Range
j = 1
Set a = Range("E6", Range("E" & Rows.Count).End(xlUp))
Set c = Range("E5", Cells(5, Columns.Count).End(xlToLeft))
With CreateObject("Scripting.Dictionary")
.CompareMode = vbTextCompare
View 9 Replies
View Related
Dec 15, 2007
I have a list of varying IP addresses in a column. I need to create a formula that will tell me how many times an IP address appears in the column so that I can ultimately determine the most common IP address listed.
View 6 Replies
View Related
Feb 3, 2014
I would like to find out a way to work out the number of minutes worked during particular shifts for weekdays. Basically I have two columns, one for start time, and one for end time. They are formatted like dd/mm/yyyy hh:mm. So they have the date in there as well.
I would like a formula that would look at a range say A1-A11 and work out what shift it is and then output number of hours worked per shift. Day shift would start at 8am and finish 5pm, Twilight shift would start at 5pm and finish at 9:30pm, night shift would start at 9:30pm and finish at 8am the next day. So I would need it to check for example the start and end times (and dates) and then output 3 rows that show the total minutes worked.
There will be multiple days so it would need to say for example Monday Day, Twi, Night, Tuesday Day, Twi, Nights etc. Up to Friday Day shift because we don't work Friday Twilight or Nights, and we don't work Weekends.
Basically there is a list of jobs completed with Start Time and End Time for each and I also have a column that works out the number of minutes worked on that job. So the formula would need to look at many rows.
View 7 Replies
View Related
May 28, 2014
I am looking for a formula or multiple formulas to perform an If/Then statement, adding and dividing. Example listed below.
If O8 = 'Y' then perform XXXX, otherwise, do nothing.
XXXX= in Y8 search for word 'apple' and add tally to AA46, in Y8 search for word 'orange' and add tally to AA47, in Y8 search for word 'banana' and add tally to AA48.
Take AA46/Y46 and put results in AB46.
If this could be put into on cell and perform all the needed actions, otherwise, multiple cell formulas is ok.
View 10 Replies
View Related
Aug 14, 2009
see the attached spreadsheet...I have a few notes of what I want to do. I think it is a vlookup, but i can't figure out how to do these.
View 2 Replies
View Related
