Alright, so I have Excel itself maximized but the window containing the cells doesn't fill the space that it should... if this makes sense, its like the cells have become a subwindow or something ...
View 1 RepliesI know how to use Application.DisplayFullScreen = True to enlarge the screen upon openning the excel file. But, when you minimize the screen and then maximize it again, the full screen goes back to normal. How do you force the screen to stay Full Screen?
View 5 Replies View RelatedI have the following code working great, however, it only applies to the worksheet that opens when the .xls file first opens. I need it to also apply to all of the sheets in the workbook, in particular sheets titled TNT & Variables
Option Explicit
Private mFormulaBar
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Dim oCB As CommandBar
For Each oCB In Application.CommandBars
oCB.Enabled = True
Next oCB
Application.DisplayFormulaBar = mFormulaBar
End Sub
Private Sub Workbook_Open()
Dim oCB As CommandBar
For Each oCB In Application.CommandBars
oCB.Enabled = False
Next oCB
mFormulaBar = Application.DisplayFormulaBar
Application.DisplayFormulaBar = False
Application.EnableEvents = True
Application.WindowState = xlMaximized
ActiveSheet.UsedRange.Select
ActiveWindow.Zoom = True
Range("salesperson2").Select
End Sub
I am using office 2011 for MAC, and am trying to create a macro that changes the color of the selected cell(s).
if I start recording the macro
click the fill color button pull down and change the color on the edit section of the ribbon
Stop the macro
No code is recorded as below but the cell did change color to whatever I selected.
Sub Macro13()
'
' Macro13 Macro
'
'
End Sub
[code].....
The colorIndex is automatic no matter what color I choose.
When I run the macro there is no change to the selected cell, but the border is destroyed.
I am using Excel 2002 and have had a couple of files that seem to have become corrupted recently. When I try to open the files there is nothing there, no cells just a grey space where the cells should be. When I try to close Excel it asks me if I want to save changes when no changes have been made.
I had not made any changes to the sheets prior to this happening so am struggling to work out what is going on.
Excel 2007
Windows 8
For this project i need to analyze clusters of data. My first step is to remove all none duplicates.
I have created this formula =COUNTIF(N:N,N1)=1, this goes all the way down to =COUNTIF(N:N,N5443)=1. My plan is to remove all rows that return a "True" to delete all non-duplicates.
I'm noticing, although 90% is recognized correctly, 10% is not. Some formulas return as true, when clearly there are duplicate values. The N Column is trimmed, to correct for spaces.
What the pitfalls with countif formulas usually are in this situation?
N Column
O Column
=COUNTIF(N:N,N5441)=1
Returns False
Trim(05441)
89365K
[Code] .......
what do i need to do when the fill tab doesn't go on to the next set of data. It is just repeating the data in the same column from the first calculation--it doesn't go on to the next set..what do I need to change when inserting my calculations...
View 9 Replies View RelatedI am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.
I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.
=IF(OR(J4="",K4=""),"",NETWORKDAYS(J4,K4,Holidays!Z29:Z39)-1)
Above is the formula I am working with. I am inserting it into row 4 thru row 996 in a number of different columns. The auto fill function works great for this part of the formula….
=IF(OR(J4="",K4=""),"",NETWORKDAYS(J4,K4,Holidays!
However, this part Z29:Z39 I have to enter manually row by row until I can figure out a better way. Do you know an easier way?
To put this formula…
=IF(OR(J4="",K4=""),"",NETWORKDAYS(J4,K4,Holidays!Z29:Z39)-1)
Into any column row 4 thru row 996, without having to change Z29:Z39 for every row, since I cannot rely on autofill?
My requirement is something like this. I have a workbook where end-users can fill data and send it to our system. They might enter any rows of data, it can be just 1 or even 100. I want to force users to fill in values in few mandatory fields : columns in B,C,D,E. Now I need a VBA code that should throw a message when it finds that the value in cells B,C,D,E are blank.
Since I am not sure how many rows of data the user can fill, I dont know how to code in VBA the above scenario. I cant give a range as the total rows of input data is not available and static value.
how to fill the blank cells in a Pivot table. I am using Excel 2007. How to do it in excel 2007. Heard that there is a provision in excel 2010 version.
View 9 Replies View RelatedI have a dropdownmanu in sheet1 with different countries taken from Column A in Sheet3. I need a macro to run when i select a country example Denmark. It will fill out transmittal code and also country code in named cells for it in sheet1. Info taken from Sheet3
Transmittal code is in below testsheet in Sheet1 cell E12.
Country code is in Sheet1 cell.
But this have to be possible to change. Also the range for the country have to be possible to change.
This vba code i need to run as soon as i select a country in the dropdown manu.
But one thing i would like to solve also is. When i select a country it will create a dropdownlist in I13 taken from the info in column, i have in Sheet3 column F. So if i select example Denmark, it will show a dropdown menu in sheet1 I13, with the ledger codes 10 and 6x. I have tried to make this work but cant make it work good.
I use excel 2003. Please have a look and upload the testsheet back.
I am using Excel 2010 and have the problem as shown in the attached file.
Input Sheet shows the Data I have at present
Output Sheet is the desired result.
I need a macro which should create an "Output" sheet by doing the following on the Input Sheet
1)Insert a Blank Column before Column A
2)Unmerge the Region Heading and insert the respective Region Name in the newly inserted Column. Region Heading will be in Bold Font.
3)Repeat Step 2 for all Regions
4)Delete the Rows which was merged.
Please note that the number of Data Rows will vary for each Region.
I have shown two Regions for explanation purpose only. There will be several Regions in reality.
The result is shown on the Output sheet
Merge Problem - Forum.xlsx‎
I'm trying to find an ID from a new open Internet Explorer Window.
I know that the ID that I'm trying to search for is "rBeginMonth_BeginDate", but my code always says that it's empty.
The code below is partially of what I've done.
[Code] .....
I have a project were i have to make a macro and place in a workbook such that as soon as i open that excel file
1. excel workbook is opened in New Excel window
2. Ribbon is hidden for this new window.
So when user closes this excel window there is no problem with other workbook ribbon, as there are open in different window
I have tried with code stated below it hides the ribbon but new excel window is not open
Private sub Workbook_open()
Application.ExecuteExcel4Macro "Show.toolbar(""Ribbon"",False)"
End Sub
Recently my friend forced Excel to close through Task Manager by Ending the Proccess... Since he did that, every .xls(x) file do not opens. No errors. Just Excel Icon on taskbar appears.... as it is minimized... But it doesn't minized.. Either this icon on a taskbar is minimized Excel icon, or this just an icon ....
RepairedReinstalleUpdated
No result ...
I am very new to programming in excel, so bear with me. I need to have a window that pops up when you load excel. I need it to say something like
If A2 > A1, then the popup should say "value exceeded in row 1"
If B2 > B1, then the popup should say "value exceeded in row 2"
If both of the statements above are true, then I would like both of the errors to be in the same window/popup, instead of two seperate ones. I hope thats clear.
I am in a middle of creating macro that makes some calculations in a file downloaded from SAP.
This Macro is in a form of a userform with 8 optionBoxes more then10 Option Buttons then after clicking on a specific button a certain action is being performed it looks like this:
Capture.JPG - PicShot.pl
The code is in one file and I would like the macro operations to be performed on data that are in separate file.
Both are open while perforing macro action, and sometimes I'm getting a stop because macro is being performed in a file with code.
Referencing it with something like:
Windows(FN).activate where FN is defined as the name of a file that is being prepared by "Prepare Template" button.
I have a project were i have to make a macro and place in a workbook such that as soon as i open that excel file
1. excel workbook is opened in New Excel window
2. Ribbon is hidden for this new window
i have tried with code stated below it hides the ribbon but new excel window is not open
Private sub Workbook_open()
Application.ExecuteExcel4Macro "Show.toolbar(""Ribbon"",False)"
End Sub
how to enter data in non-adjacent cells using a fill command.
Here is what I am trying to do:
in the column, I am holding ctrl button to select every 10th cell down the sheet. I need to enter a date in every selected cell that is exactly 7 days apart, i.e., 11/7/08 then 11/14/08 then 11/21/08, etc.... but no other dates or data.
I have tried to figure out a way to do this other than manually, but am confounded.
I have a spread sheet that I have written that has 2 html links in it. The links work, but they only open in one browser tab. How do I get them to open in different tabs? Opening in two different browser sessions would be acceptable too. I have Excel 2007 and IE 9 but the users may have different versions.
View 7 Replies View RelatedI'm working on an Excel workbook that is opened by a batch file, updates information, copy and pastes that information to PowerPoint, and closes itself after spending two minutes idle. This is all for an employee communication monitor that runs 24/7. However, I don't like that the Excel spreadsheet displays on the monitors for two minutes every time it opens and runs.
Right now I was using the bit of code below to minimize the workbook when it was done copying and pasting the information. It works fine for the monitors, but the application is not visible in the Taskbar.
Sub Workbook_Open()
...
Application.Visible = False
End Sub
Is there anyway to minimize the workbook while keeping the window visible in the taskbar?
I compared data between excel worksheets all the time, well recently my computer was upgraded from Windows XP to Windows 7 and since then I have not been able to figure out how to have an Excel file to open in the Excel window selected(or last active window) when I have more than one workbook open. Is there a way to do this?
View 5 Replies View RelatedHow to use an Excel worksheet I have, so I decided to make a button with a macro, which when clicked a kind of message box pops up and you can read the tutorial. When you are done you just press ok and the pop up window closes.
I know about vba I just have to use msgbox, keep on adding lines with the text and that's it! But after many attempts I found out that it ain't that easy.
[Code] ......
So I made something like this:
[Code] ....
but at a point I got this error: "Too many lines continuations".
I wanna make something that looks a bit like this: p69pxC8.jpg
But way simpler, with my text, a scroll bar to roll up and down to read and an ok button at the end. I don't need special text with hyperlinks or anything at all, plain text does the job.
It just now crossed my mind, would it be viable to also add a "Print" button next to the "Ok" button in the pop up windows with the tutorial, so when the "Print" button is clicked, the tutorial is printed?
What's the code for opening a Windows Explorer window from within an Excel Macro?
View 7 Replies View RelatedMy set up office 2007 win xp pro ie 8 I am using the code below to retrieve web pages etc it works fine, however it display in differ areas of the screen, so I was wondering if there is a way to control the positioning and the size of the window?
Code:
Set EXP = CreateObject("InternetExplorer.application")
EXP.Visible = True
EXP.Navigate (aurl)
[Code]....
I have this module that is supposed to delete rows containing some words and those that are entirely empty..
The macro works fine when I open the file for the first time (excel as well) but subsequently if i try to run it again, the macro doesnt work anymore. What could possibly be causing this bug?
Private Sub DeleteRows()
ScreenUpdating = True
Dim Rng1 As Range
Dim X As String
X = " TOTAL"
Do
Set Rng1 = ActiveSheet.UsedRange. Find(X)
If Rng1 Is Nothing Then
Exit Do
Else
Rows(Rng1.Row).Delete
End If
Loop............
This "smells" like a simple question, but I've had no luck finding a way to [programmatically] adjust the App.Window to fit around some cells.
I've found "Application.Goto", also the Application.Width/Height setting. The App.Width setting is pixel based, so if there's an easy way to know a cell's pixel-location, that'll work too!
We are running Office 2010 part of Office Professional Plus 1010 (corporate install). We have added both the Analysis Toolpak and Analysis Toolpak - VBA to the add-Ins and have the button on the toolbar, however when we click on the button, we don't get the popup window allowing the user to pick the analysis tool they want to use. Have tried this on a number of PCs (we all run the same version) and it doesn't work on any of them.
What we have to do do make this toolpak work?
I have some rows that have some text for example "0- 56933 tex". the numbers are not always the same, but there is a dash, and sometimes there is no space after the dash. I want get the numbers before the dash in a variable and the one after in another variable.
View 9 Replies View Related