Is there a formula where I can take a zip code, and for any zip codes that have the 4 digit zip code extension, to remove those 4 digits, and to add a zero to the beginning of any zip codes where the zero was cut off. Is there a formula I can run my zips through to do both of those tasks?
View 1 RepliesI am wondering if there is an easier way to look up values in a matrix. I use the VLOOKUP with the vertical values as the lookup_value, then another lookup for the col_index_number to find the horizontal values. The example in the attached file is just a sample of my spreadsheet. I need to apply this to a roughly 10*10 matrix (which changes every now and then) and apply this matrix to over 1,200 rows. Is there an easy way to returne theses values or is the way I am currently doing it the best option.
View 3 Replies View Relatedi have an excel file(master copyvba.xls) in which i have my vba codes. My problem is that each time i open another excel file ,my vba codes does not work. I must open my master copyvba.xls to enable macros in my other file.how to make the vba codes available to my other excel files ?
View 2 Replies View RelatedBar codes would contain a part number and a quantity.
822808 / 1604 pcs
1st question: I have scanned them into excel, but how does the next scan get into the next cell? It is currently putting multiple scans into the same cell.
2nd question: Can the data be broken up into separate columns? (e.g. Column A = "Part Number", column B = "QTY") I know about text to columns, but I think I have to get the format right?)
Excel to calculate distance in miles between post codes
Is there anyway of doing this?
Column O is a list of unique 1000 supplier codes
Column G is a list of 75000 imports (dollar amounts), each row has a supplier code.
I want to have a formula in Column P to sum the rows where the suppier code equals the supplier in column O.
i thought this was easier in 2007.
How to use VBA codes to automatically change parts of the formula? Example1:
Change formula "=SUM(A$10:A$100)" into "=SUM(A$10:A$1000)"; Example2: Chage formula.........
I have a column of 3 letter codes (Righthand side) all differant ie BHP, CBA, NAB, WBC etc. (2000 of them) On the left I have the formula ie =MisData!VOLUME!BHP.ASX
Each formula should have the relevant code within it such as the BHP in the formula on the 2nd row should be CBA, the third formula should have NAB in it. right down the whole 2000 codes without doing it one by one. Now using the find & replace tool to do it one ny one
=MisData!VOLUME!BHP.ASX BHP
=MisData!VOLUME!BHP.ASX CBA
=MisData!VOLUME!BHP.ASX NAB
=MisData!VOLUME!BHP.ASX WBC
I am using Excel 2003.I need two distinct sums:
I need to calculate out the loan amount of approved loans by week (weekending on Sunday). For example for the week ending December 28th, 2013
$1,234,567,890 in total loans
I also need to have a list of sums of the loan amounts per code types of approved loans. For the week ending December 28th, 2013
$123,456.00 in total loans for Code: LTV/TLTV > Guideline max
$987,654.00 in total loans for Code: FICO > 10 pts below Guideline min
I need to ignore any loan amounts and codes for any loans that have not yet had a approved date entered and also ignore all loan amounts for any loans that are denied. I have tried doing this in many different ways with Pivot Tables and I am not getting the results I need.
I'm trying to convert various codes from one column of an excel spreadsheet into different codes in another column. I was able to accomplish this with "If" statements, however I'm only able to string together seven of these statements in one command. Is there a better way to add formulas for more than seven conversions? Below is a copy of what I've done so far with the seven converts:
=IF(ISNUMBER(SEARCH("WARN",J2)),"Warning",IF(ISNUMBER(SEARCH("PSSNAP",N2)),"Sales",IF(ISNUMBER(SEARCH("WARN",L2)),"Warning",IF(ISNUMBER(SEARCH("2699",L2)),"Warning",IF(ISNUMBER(SEARCH("4004",L2)),"Warning",IF(ISNUMBER(SEARCH("2036",L2)),"Warning",""))))))
I want to add about 15 more codes to convert within this formula but it's maxed out in the format I'm using.
I am using Excel 2011 on a mac. I have a selection of data that lists a repeating code (say group 1, group 2, group 3 etc)and a value (-1,-2.3,3,6 etc) and need to find a quick way group together all the codes and next to that a value that counts how many values who share the same code hold a value greater than -1? I can do this myself in a pivot chat with count totals but my issue is how I can show the number of codes greater than -1.
Attached is an example of the data I want to sort.
Example of data that needs sorting.xlsx
I call prospects to generate business. I want to respect their time by calling before 8:00 PM so I need to know their time zone. I have a column in Excel that lists their area code, but I don't know their state.
I have tried everything imaginable to duplicate the results of the previous post to no avail. I'm using Excel 2011 on a Mac.
I'm using =VLOOKUP(B2,$I$2:$J$364,10) for my formula, where
B2 is the area code $I$2:$J$364 is the range where the area code/time zone data lives (I = area codes, J = Time Zone) 10 is column J, i.e. the Time Zone column that "feeds" the answer.
I've attached a screen shot to show what I'm doing.Screenshot at Feb 05 15-33-01.jpg
I am creating a billing sheet that has a column where charges are coded (to determine what they are for) and I want a "Grand Total" for everything followed by a breakdown "Total" for things with the same code. Is there a way to set SUM code to grab all numbers next to codes?? (EX. Column A is Billing Code, column B is Cost in $$; I want a total at the bottom that takes the different amounts in column B based on the various information/codes from column A).
View 2 Replies View RelatedI am basically doing some housekeeping and trying to reduce my number of code lines.
Can this bit of code be done a bit simpler?
For r = lrow To 15 Step -1
If Range("N" & r).Interior.Color = vbRed Then
Range("N" & r).Interior.Color = vbCyan
Range("N" & r).Value = "Triangular"
End If
If Range("V" & r).Interior.Color = vbRed Then
Range("V" & r).Interior.Color = vbCyan
Range("V" & r).Value = "Triangular"
End If
Next r
It has been working perfectly from all sites but for some reason started to enter the wrong data once in a while?
Sub Macro8()
Application.StatusBar = "Updating Data from NOAA"
Application.DisplayAlerts = False
Application.ScreenUpdating = False
Sheets("Web Data").Select
With ActiveSheet.QueryTables.Add(Connection:= _
"URL;http://www.srh.noaa.gov/ifps/MapClick.php?TempBox=1&HumidBox=1&Submit=Submit&FcstType=digital&textField1=32.74&textField2=-96.45&site=fwd&Radius=0&CiTemplate=0" _
, Destination:= Range("A15"))
.Name = _
"MapClick.php?TempBox=1&HumidBox=1&Submit=Submit&FcstType=digital&textField1=33.65&textField2=-95.54&site=fwd&Radius=0&CiTemplate=0_5"
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = False............................
I am using VBA to enter customer information into a Microsoft SQL database. I have an excel sheet with thousands of customers listed. I will be using a While loop to process each line of the sheet. Part of the While loop needs to make any format changes necessary before the data moves over to the DB. So here is the issue:
How do I turn the following phone numbers:
(410) 273-9200
910-944-1232
276 623 4254
410 612 1100 Rob
(413) 786-1636 Cindy
1-800-783-4661
304) 842-5491 Sherry
Into a uniform layout? I would prefer ###-###-####
Each of the numbers above is an example from the list I have. There may be more variations (I have over 20 seperate lists to process, with over 10000 customers per list)
I imagine I need some process that will remove all character except numbers and then break the numbers up to add the hyphens back in at the appropriate places.
I have a database of sales records containing 6 address columns (C-H). I want to extract the country (which may be entered in any of the 6 columns) and place this in a separate column. I have a definitive list of countries on sheet 2 which I have saved as a named range (Country).
I would like to be able to set something up which searches the six address fields on sheet 1 and if a match is found against the Country range, enter this in a separate column (I). A non-code solution would be ideal as I am nowhere near that level yet and want to be able to understand what I am doing as far as possible!
I frequently use the record option to start off my macros. I realize this usually results in recorded events which are not absolutely necessary (recording a print macro is one that is full of excess line items). I then try and combine what I have recorded with what I have garnered from this wonderful website. If my spreadsheets are small - and I am not writing code to pass any inspections - is there a need to go back and clean up?
View 2 Replies View RelatedHowever I have survey data results and in one of the cells it has multiple values which are separated between ; and some are not separated at all e.g B&Q; The Range; Wicks The Garden Shop
Also there are spelling mistakes everywhere and variation of the word B&Q e.g b+q, B n Q
I need to add count up all of the B&Q, Wicks etc...
I have an old customer list maintained by my company's previous owner in excel format that mostly stored numbers ###-#### format, but also some in ###-###-#### format.
My new list has always been maintained with numbers in (###) ###-#### format.
I have merged these two lists in a new excel file have begun the tedious process of cleaning up duplicates and bad data.
I have used conditional formatting to highlight duplicate numbers in the appropriate columns (L, M, N, O) in this case. However, it does't find matches in the other formats or perhaps the number with the old area code. I know the area code change could lead to false positives, but they should be minimal as this is a small business with mostly local customers. So what I'd like to find out is a formula for conditional formatting that will compare the last 8 characters in each cell (###-####) so as to eliminate issues of missing or different area codes. I would like it to check all of the columns for duplicate numbers not just within each column or within each row individually.
Also separate but related if possible to highlight a different color any cells with data not in any of these formats or if not in (###) ###-#### format if it's too much for all the formats.
I wanted to create a target workbook that is a subset of the source workbook
1) I want to specify a list of worksheets in the source workbook:
For Each WSCurrent In Sheets(Array("SheetA", "SheetB", "SheetC"))
Next WSCurrent
2) I want to them copy these sheets into another workbook (don't know how to code this)
3) I then want to hardcode all these sheets (I don't know the most efficient way to do this)
4) Lastly, I want to eliminate certain columns (can be fed through a hardcoded list of Columns to delete e.g. X, W, Z)
I have several time series in excel pulled from a datasource on a daily basis, however some series include weekends, some dont and some others have a few days missing. What I did is I already have a column set up with only weekdays on the other sheet, what I am trying to do is match the data with the dates.
The obvious choice is vlookup, but given that I have over 50 time series and the time span is over 10 yrs, its not the optimal solution...it will crash the sheet i think. I also tried a combo of match and index...but same...too many formulas. I think I need a macro. Does anyone who analyzes time series have a "cleaning" code that he oe she can share with me?
This is the current code I am using, it works but from another post it looks like it could be cleaned up.
With Sheets("Web Data")
.Activate
Range(.Range("A6")).Offset(2, 1).Resize(2, 24).Copy
Sheets("MW Forecast Calculation").Select
Range("C9").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
This is the code I am trying to get to work but I am having trouble with the red text.
Set CopyRange = Sheets("Web Data") Range(.Range("A6")).Offset(2, 1).Resize(2, 24).Copy
Set PasteRange = Sheets("MW Forecast Calculation")
Cells ("C9:Z10")
CopyRange.Copy PasteRange.Values
I have a worksheet that contains lots of value. I want to run quick calculation on it but for some reason counta function counts blank cells.
I checked and the cells with =len() and it returns a number > 1
What is the proper way to clean the whole worksheet with some copy paste value and get rid of invisible character like space or nonprintable ones to be sure to get the right number of cells with value?
My problem has to do with an list of over 22,000 addresses (don't want to think about going through it manually )
The names are in column A and the addresses are in column B. The problem is, is that some of the addresses fit in one cell and others are spread over two (Oklahoma City, OK in one cell, 73034 in the one below it, for example.)
The names with corresponding addresses taking up two squares have been placed in merged cells, so that they line up with their addresses. Here is a picture below.
Capture.PNG
What I need is each address in one cell next to its address in one cell (to make it searchable, etc.) I thought I was being really clever when I copied Column A, then pasted the formatting onto Column B (so that the cells would be 1:1, one name cell, one address cell) but didn't realize I would be losing the information in the cells being merged.
how to split data into columns.
I have a set of (imported) data consisting of 1000+ rows. The data set (bank statement) contain six informations (date1, transaction, vendor, date2, sum1, sum2) in one cell which has to be split into six columns.
Using text-to-columns will generate more than six columns since the set dosn't have any delimiters and both the transaction and vendor name-fields contain blank spaces.
Is there a way to either split the data into the correct number of columns or if text-to-columns is used - a way to manipulate the data into the correct columns, for instance with help of filtering ?
small data sample included
I have two columns, zipA and zipB. There are over 7000 rows and I need to calculate the distance between zipA and zipB for each row (so the result should be over 7000 rows of distances (in miles)). I posted this in the programming board because I figured it would require some. I don't have any add-ons.
View 14 Replies View RelatedJust starting to learn VBA. I have the 2 following codes.Can they be combined into 1 code.I have 2 buttons one say hide rows and the other button says unhide rows....can 1 button be used and when the rows are visible the button says hide rows and when the rows are hidden the button says unhide rows
Sub hiderows()
ThisWorkbook.Sheets("sheet1").Rows("3:12").Hidden = True
End Sub
Sub unhiderows()
ThisWorkbook.Sheets("sheet1").Rows("3:12").Hidden = False
End Sub
At my last job we purchased a zip code addin from spheresoft that could give you a distance between two distance ie: =ZipCodeDistance(zip1, zip2)
This worked well but I am now at a new job and wondering if there is any data out there that could help me build my own sheet. I just need California
I have both zip codes now just need the distance, I could sit down, drink a ton of coffee and enter zip codes all night into Mapquest but am hoping for a better way.
I have a spreadsheet containing data in coloumns A to L.
Where all the codes in column B are the same then a border must be placed around all the codes that are the same i.e the border must start in Column A and end with column L.
provide me with the code the will put borders around the codes in column B that are the same ...