Export Range To JPG And Store To Server
Oct 30, 2012
I have code which is convert some range of excel to Png and store to my local drive. This code is working fine.
I have created web site on my intranet and the data store on server, now i use this code and pickup image from my local storage i.e. from "C" Drive and paste in to service folder, bcoz i uploaded report as a Image and it timely refreshed and changed
Is there any way so this code directly store to service folder, if i can use IP address or HTTP path
I had tried with HTTP path but it is not working.
My server path is [URL] .......
OR
Is there any way when local folder got image than automatically server folder also get same image...
Sub bah()
''' Set Range you want to export to file
Dim rgExp As Range: Set rgExp = Range("B2:C6")
''' Copy range as picture onto Clipboard
rgExp.CopyPicture Appearance:=xlScreen, format:=xlBitmap
''' Create an empty chart with exact size of range copied
[Code] .........
View 9 Replies
ADVERTISEMENT
Jul 17, 2008
I am trying to do is use a loop to store data from a range into a 3 or 4 dimensional Array and then output the data from the Array in another range. so for example the i want loop through the data in this range and store all data that is in account 701 into an array and then output this information in another range (tab). The data would have several different account but I only want to see one at a time.
Account Price Amount 701 150 1,000,000 701 125 250,000,000 701 3.25 6,000,000 702 4.25 25,000,000 702 2.35 3,600,000 702 2.55 10,000,000
View 9 Replies
View Related
Apr 17, 2008
I can't quite seem to figure out the syntax for pulling a Range variable out of an array of type variant. I always seem to receive the error message "Object variable or With block not set", an example of my code as follows:
Dim currentRange As Range
For i = 2 To UBound(myArray)
currentRange = myArray(i)
' insert code here
Next
I have also tried:
Dim currentRange As Range
For i = 2 To UBound(myArray)
Set currentRange = myArray(i)
' insert code here
Next
Which results in the error "Object required". What is the correct syntax?
View 4 Replies
View Related
May 2, 2006
If I want to store bar codes in a range of cells in Excel, how do I format the cell so the barcode appears as scanned in.
We are scanning in Barcode from our inventory to our excel stock book.
I am doing it now but when we export it out or link it to an access table, it either does not appear or is truncated.
View 4 Replies
View Related
Apr 20, 2008
I have a list of names from cell A1:A10 in sheet "Input." Each of these names has its own corresponding sheet in the workbook. I want to be able to run the same exact VBA code for each sheet. In other words, I am trying to get my name variable to automatically change to the next value on sheet "Input." I'm sure this is pretty simple to do, but I can't seem to find anything that works!
View 5 Replies
View Related
Nov 18, 2008
I want to perform some operations (basically a secondary filter) based on the values which are currently filtered within a single filter column.
.Autofilter.Filters(n).Criteria1
and
.Criteria2
are great, but what if there are more than 2???
i.e. I have a column containing values L01 to L20.
My column is filtered on L05, L06 and L07 (or some other combination).
I want to extract the values and L05, L06 and L07 and do what I will with them.
View 9 Replies
View Related
Jul 19, 2009
I am trying to select a range based on two variables which store the column numbers. what I have is:
View 4 Replies
View Related
Oct 25, 2008
Using and adapting some from [url] and [url] I succeeded in exporting name ranges as jpg's.
However, I still have a 'problem' : I would like to set the dimensions of the jpg in code.
An additional question on this subject.
The ranges I am exported have a green background (for publishing on a website). When I do the export in Excel XP, everything looks fine (except for the automatic sizing), but when I use Excel 2007 there is a white border around the jpg.
View 9 Replies
View Related
Jun 19, 2014
My Cell Range is ("J3:L28") and I want it to export to a txt file with the File name from Cell (M2) to C:Test. Macro to make a push button for this?
View 3 Replies
View Related
Apr 27, 2012
I'm trying to create a formula that looks for matches in 3 ranges and exports a specific value dependent on if there is a match or not into a new cell.
IE:
If any value in Column A = D1 AND any value in Column B = E2 then enter corresponding value from Column C into F2, if not then place "New Data" in F2.
If it makes it easier to conceptualize: Columns A,B,C are in one worksheet. Columns D,E,F are in another worksheet.
Worksheet 1
Column A Column B Column C
1 Frog Eye Head
2 Rabbit Eye Head
3 Cat Nose Head
4 Horse FR Hoof Leg
5 Dog Nose Head
Worksheet 2
Column A Column B Column C
1 Horse Eye "New Data" (no match from column A or B)
2 Cat Nose Head
3 Dog Nose Head
4 Rabbbit FR Paw "New Data"
5 Horse FR Hoof Leg
I need a Formula for Worksheet 2, Column C that searches Worksheet 1 Columns A & B and places the corresponding match from Column C (if there is a match).
I've tried Lookup and IF/AND formulas to no avail.
View 9 Replies
View Related
Jun 19, 2014
My Cell Range is ("K3:L28") and I want it to export to a txt file with the File name from Cell (M2).
View 9 Replies
View Related
Jan 5, 2008
(The attached workbook will provide a more obvious explanation.)
I am building a 'reporting' workbook. It has 3 tabs.
i. the first I will use for buttons to call macros (no help needed)
ii. the second tab is 'REPORT' - where data from the third tab ('DATA') will be collected/organized -based on a textual value in column D - before being exported into a seperate workbook (finalized report).
iii. third tab is 'DATA' - this sheet will contain all the data that will provide info for reports
Presently, the 'REPORT' tab has been manually filled in with data from 'DATA' tab - I did this thinking it would provide better explanation here; take note that values in column D will be gathered via vlookup to other worksheets not included her.
Here is what I want to do:
1. goto 'DATA' tab, find the first PLATFORM (column D) text value
2. goto 'REPORT' tab, put that text value in B2
3. go back to 'DATA' and in each row that the same PLATFORM is present, copy over the corresponding info to the appropriate cell in 'REPORT' tab
4. once I've collected all the rows for one PLATFORM - export and save the 'REPORT' worksheet to a seperate workbook in 'C:REPORTS' and close
5. clear the range where data is being written in 'REPORT' tab ("A5:H60000"), then go back to 'DATA' and get the next PLATFORM (column D) text value - enter it into B2.
6. fill the range ("A5:H60000") with the corresponding values from 'DATA' based on the new PLATFORM name...
View 3 Replies
View Related
Jun 3, 2014
Ok, so I have a sheet with a working drop down list with dates, and depending on the date you choose, certain columns getting hidden and some un hidden. The layout is the same form is repeated 7 times, and which ever date you pick, the corresponding form gets un hidden. My question is, I have a button that will export it to a new sheet with just the values, to be sent to the office. I don't need to send the entire work book and confuse people.
I know how to export, just not using an if then to choose which columns to export.
sample: Attachment 322549
fixed the attachment: added my codes
View 4 Replies
View Related
Oct 30, 2008
I'm trying to automate the process of exporting a range of cells to a text file. I think the Print# command will work because I don't want the quotes at the end of each line. Each range of cells will be a separate text file, and I want to save and name the file according to the column it's in. This bit of code from dominicb seems to be what I'm looking for, in principle.
View 5 Replies
View Related
Oct 30, 2006
In the attached file, I have two columns (A and B) and the column A will vary within the range from A4:A104 and column B will vary according to A. Nevertheless column A has #N/A error which is mandatory for chart. So I am looking for a macro to do the following:
Start with cell B4 and go until value exsists for "B" (let me say for eg. B40) and select the range A4:B40 and ask the user to give name for the export file export only that selection as a tab delimited txt file.
http://www.cpearson.com/excel/imptext.htm
I looked in to the above article. But i have trouble in selecting dynamic range and to avoid #N/A error in the range.
View 4 Replies
View Related
Aug 11, 2014
I'm trying to use VBA to populate excel range data to MS Word bookmark.
I am using Excel 2007 have following field
Column A Column B
Cash xxxxx
Liabilities xxxxx
RE xxxx
What I wanted to do it to populate data at Column B of Excel to MS Word Template below
Cash xxxxxx
Liabilities xxxxxx
RE xxxxx
I've tried using below code sample code but it does not work.
Sub testing()
On Error GoTo errorHandler
Dim wd As Word.Application
[Code]....
View 1 Replies
View Related
Nov 5, 2008
I have a spreadsheet which I used in a previous job, which was set up by our old IT Department. Basically, it allows me to save information onto it, which I can then retrieve, (in any conditions/search fields i.e. in a date range etc) but the problem is; when I try to use it on my laptop, I look at the editor used for macros, I can see that the spreadsheet is linked to the servers of my old company. Therefore, I cannot use it myself
I do not know a lot about macros etc. but I can send a copy of the spreadsheet to anybody who is willing to help!
I think it is just a case of changing the macros/strings of where to draw and save information to/from, but I don;t know.
View 10 Replies
View Related
Nov 25, 2008
This code should retrieve data from sql server to excel sheet
filtering according to the "where" statement
its a modified recorded macro.
View 7 Replies
View Related
May 2, 2013
I am looking to further improve this code by adding the functionality of logging to a secure HTTPS server using username and password.
Code:
Sub TestFileExistsandDownload()
'This code will test a web address to see if a file exists
'If the file exists, it will download the file.
' It's a mixture of code retreived from 2 sites:
' [URL]...
' [URL]....
[Code]...
View 1 Replies
View Related
Jul 31, 2006
I'm trying to open a file from server.After doing all the changes I have to save the file back to the server in the same name. It is asking for save as option.it shouldn't. I want to save the file in the same path and in same name without asking the option of "Save as". I hv full permission for editing the file
View 4 Replies
View Related
Jun 13, 2008
I try to run a macro on my workbook everytime I open it by getting the data from the ftp file. This will be the service number for my customer. Both the excel and the data file are located in the ftp, so that I can retrieve the file wherever I go. Basically I got some code from the internet which work fine on the local network, but once it come to ftp server I am stuck there.
Public Function NextSeqNumber(Optional sFileName As String, Optional nSeqNumber As Long = -1) As Long
Const sDEFAULT_PATH As String = "Ftp://mycompany.com"
Const sDEFAULT_FNAME As String = "Service.txt"
Dim nFileNumber As Long
nFileNumber = FreeFile
If sFileName = "" Then sFileName = sDEFAULT_FNAME
If InStr(sFileName, Application.PathSeparator) = 0 Then _
sFileName = sDEFAULT_PATH & Application.PathSeparator & sFileName
If nSeqNumber = -1& Then
If Dir(sFileName) <> "" Then
Open sFileName For Input As nFileNumber
Input #nFileNumber, nSeqNumber..................
View 2 Replies
View Related
Apr 29, 2014
We have a number of internal office servers (Active Directory - Exchange - SharePoint "free" etc etc usual stuff) and I need to create an uptime/downtime calculator in excel with the facility to record the information on a daily, monthly and yearly bases but not sure how to go about this.
I would like a way to record on a daily bases what the uptime/downtime has been for each server and then to record the same for that month in a percentage.
For example in a 24hr period for each month of the year:
For that day Active Directory Server was UP for 24hrs. (100% uptime) - (0% downtime)
X by the number of days in the month i.e.
Over the month Active Directory has been UP for. (XX% uptime) - (XX% downtime)
Exchange Server was DOWN for 1hrs. (95.833% uptime) - (x% downtime)
X by the number of days in the month i.e.
Over the month Exchange has been UP for. (XX% uptime) - (XX% downtime)
SharePoint Server was DOWN for 1hrs. (95.833% uptime) - (x% downtime)
X by the number of days in the month i.e.
Over the month SharePoint has been UP for. (XX% uptime) - (XX% downtime)
View 5 Replies
View Related
Aug 22, 2013
I have a database in sql server i want to make a excel form where in a user will enter the data and print the excel file
E.g.
S.NoDESCRIPTIONPART NO
I want a user to write the item description and data should come directly from database .
View 4 Replies
View Related
Jul 29, 2009
I need to run multiple queries and insert their results into Excel cells. Each query will return only one result (a number, or a null). What is the best way to accomplish this?
Below is an example of the code I'm currently using. It does return data to the cell specified, but I'm guessing there's an easier way to populate multiple cells with the results of multiple queries.
View 14 Replies
View Related
May 28, 2012
I am trying to get some data on a excel. This data is available on a unix OS solaris server.
The data is available in tabular format on the txt file in the server and i need to populate this data on my excel sheet.
How to connect to unix from excel and how to get the data.
View 1 Replies
View Related
Jan 30, 2013
How to pull data with a VLOOKUP to a file located on a Server.
My big problem is not understanding the syntax of the Server location. I've provided it below (obviously with some character changes).
I have a file located on my Hard Drive. I need to perform a VLOOKUP from A2 on this spreadsheet. The File on the Server is called "LookupTest.xls". The Range of Data is from Sheet 1 and is from A2:C4 and I need to pull the data from column C depending on what is selected from A2 from the file on my HD. I understand how to use VLOOKUP, just not when I'm pointing to another file on a Server.
Server mapping from Windows Explorer:
rbbabc$ on 'RP17409 - ABC Database (AHSSRVVN678.tge.com)'
Again, that server mapping is fake, as I changed it, but this is how it looks on Windows Explorer.
I'm trying to keep a master file of Data on a spreadsheet found on a server so that one master file can be updated, and several other tools pull from that Master File on VLOOKUP, Validation Lists, etc.
View 4 Replies
View Related
Feb 13, 2013
I'm creating my first stored procedure ever and it looks relatively good so far. The problem is with passing the parameters, more exactly:
Arguments are of wrong type, are out of acceptable range, or are in confilict with one another
The essential part of the stored procedure looks like:
Code:
CREATE PROC GetUserAuthForApp
@User varchar(7),
@application int
AS
while the essential code calling it from VBA looks like:
Code:
Dim strConn As String 'Connection string to SQL Server
Dim strSQLtoExecute As String 'SQL query string to execute
Dim oConn As ADODB.Connection 'Object for connecting
Dim rs As ADODB.Recordset 'Object for recordset
Dim cmd As ADODB.Command
Dim prmUser As ADODB.Parameter
Dim prmApplication As ADODB.Parameter
Dim stProcName As String 'Stored Procedure name
[code]....
and in that rs.Open comes that error.
What have I done wrong, how do I fix it?
View 9 Replies
View Related
Feb 3, 2009
I would like a windows folder to be created on a server from cell Cbut to be filtered by the Data in B.
dwights folder on teh server to create '124 elm street' from the in C1
james folder to the server to create the folder '15 killfops' street'from C5
\server empdwight
\server empjames .....
View 9 Replies
View Related
Sep 17, 2009
Our small company only has 5 computers in it with mine acting as the "server". I want to put a macro on our customer order forms that all computers can access on the server that will save the file as 3 or 4 cell names serparated by commas and save it in a specific location on the server.
I got the macro to work perfectly on my computer but when I try to type in the appropriate path to the server the file gets saved in their My Documents folder 99% of the time. I did get it to work twice but it seembed to be completely random as it didn't work any of the times before or after.
Here's what I have so far: ...
View 9 Replies
View Related
Sep 24, 2006
to copy files on computer which runs excell.
But is there a way to copy files from/to servers?
View 3 Replies
View Related
