If I want to store bar codes in a range of cells in Excel, how do I format the cell so the barcode appears as scanned in.
We are scanning in Barcode from our inventory to our excel stock book.
I am doing it now but when we export it out or link it to an access table, it either does not appear or is truncated.
I am working for a small job shop company that is producing many bespoke products and recently the company has grown up a bit and a shop floor data collection is required in order to have a control over the production process. The company has 14 machines which are operated by 7 operators and this means that each operator is running 2-3 machines at the same time. The best solution for data collection is barcoding into excel. However i need 3 macros (I think) in order to meet my needs. Those macros need to:
1) show what is currently on the machines (who is doing what and when the particular job has started)
Machine
Operator
Part No
Description
Clock In
Note: Description will not be scanned, this can be filled in based on the vlookup from the waiting parts list
2)show what have been done (who did what, on which machine and clock in/out times). Here it is important to mention that sometimes jobs are stopped and taken off the machine and they are put on the machine later on. Sometimes it will be different machine or operator etc)
Part No
Description
Machine
Operator
Clock In
Clock Out
Machine
Operator
Clock In
Clock Out
Machine
Operator
Clock In
Clock Out
3)show what is remaining to machine.
While searching for a solution I have found here a really nice topic which seems to be a good foundation for my needs Scan barcode to excel with date & time stamp in & out.
I am trying to select a range based on two variables which store the column numbers. what I have is:
View 4 Replies View RelatedIs it posible and how to create a list of barcodes from a list of numbers on the worksheet?
Strokescribe seems to have some ind of solution but the data can't come from the worksheet.
I have code which is convert some range of excel to Png and store to my local drive. This code is working fine.
I have created web site on my intranet and the data store on server, now i use this code and pickup image from my local storage i.e. from "C" Drive and paste in to service folder, bcoz i uploaded report as a Image and it timely refreshed and changed
Is there any way so this code directly store to service folder, if i can use IP address or HTTP path
I had tried with HTTP path but it is not working.
My server path is [URL] .......
OR
Is there any way when local folder got image than automatically server folder also get same image...
Sub bah()
''' Set Range you want to export to file
Dim rgExp As Range: Set rgExp = Range("B2:C6")
''' Copy range as picture onto Clipboard
rgExp.CopyPicture Appearance:=xlScreen, format:=xlBitmap
''' Create an empty chart with exact size of range copied
[Code] .........
I am trying to do is use a loop to store data from a range into a 3 or 4 dimensional Array and then output the data from the Array in another range. so for example the i want loop through the data in this range and store all data that is in account 701 into an array and then output this information in another range (tab). The data would have several different account but I only want to see one at a time.
Account Price Amount 701 150 1,000,000 701 125 250,000,000 701 3.25 6,000,000 702 4.25 25,000,000 702 2.35 3,600,000 702 2.55 10,000,000
I can't quite seem to figure out the syntax for pulling a Range variable out of an array of type variant. I always seem to receive the error message "Object variable or With block not set", an example of my code as follows:
Dim currentRange As Range
For i = 2 To UBound(myArray)
currentRange = myArray(i)
' insert code here
Next
I have also tried:
Dim currentRange As Range
For i = 2 To UBound(myArray)
Set currentRange = myArray(i)
' insert code here
Next
Which results in the error "Object required". What is the correct syntax?
I have a simple Excel file with some columns as you can see from here:
[URL]
I have a simple formula (COUNTIFS) to count occurrence of certain condition that I specified. everything works fine here, but I also need to write current value of count cell at the end of each qualified row.
Data entry is random and I may work on row 1 and then row 25, so incremental row numbers that is shown by excel is not my answer. I need exact number of occurrence for each qualified row.
excel.png
Are there any good website for a beginner on how to set up and store information in excel as a database? I have mutliple sheets that I use everyweek for payroll and I would like to store the previous weeks data in a seperate sheet so I dont have to save each weeks sheets.
View 9 Replies View RelatedI have a list of names from cell A1:A10 in sheet "Input." Each of these names has its own corresponding sheet in the workbook. I want to be able to run the same exact VBA code for each sheet. In other words, I am trying to get my name variable to automatically change to the next value on sheet "Input." I'm sure this is pretty simple to do, but I can't seem to find anything that works!
View 5 Replies View RelatedI want to perform some operations (basically a secondary filter) based on the values which are currently filtered within a single filter column.
.Autofilter.Filters(n).Criteria1
and
.Criteria2
are great, but what if there are more than 2???
i.e. I have a column containing values L01 to L20.
My column is filtered on L05, L06 and L07 (or some other combination).
I want to extract the values and L05, L06 and L07 and do what I will with them.
I have several words in sheet2.one word per line. every line in sheet1 should be checked and deleted if the line (colum 3 and 4) contains any of the words in sheet2. i decided to go with two for-loops, my Problem is a error in line 7 and 9 (indicated by arrows). it seems to me that ...Cells(...).Value is not allowed for strings. i already tried .Text, checked several VBA Forums but could not find a solution.
View 13 Replies View RelatedIs it possible for an Excel sheet to convert numbers/text to a machine-readable UPC?
View 3 Replies View RelatedI have a worksheet where some cells contain a comment. I don't know beforehand how many of those cells are present, nor their address. I want to write a macro that stores the values of only the cells that contain a comment into an array (of course the size of the array is not known beforehand). This should be done by scanning through those special cells in a given order (by rows, by columns, whatever).
View 4 Replies View RelatedI am trying to do some calculations as shown in the file. The MAcro has to show the formulas and then calculate the value, the problem is that the formulas change all the time and depends of Column A. Column A defines de Values that we will use so they will change as well. I have fould the way to copy one formula and make it usefull in the cell next to it but the problem are the cells that I named before. All my values change in each Loop and finish with the values of the last loop. I would like to save each value that corresponds to the variable (column A) and his formula, to then calculate.
View 4 Replies View RelatedGoal: To extract the barcode (numbers and letters between B/C: and , P/G) from the following string:
"Codec B/C: A01234567, P/G: 123456728912345"
Current Function: =MID(A1,(FIND("B/C:",A1)+5),(FIND("P/G:",A1)-14))
Problem: I need this function to work for barcodes of varying lengths. For example, in some cases the barcode may be 8 characters long and at other times the barcode will be 14 characters long etc.Below is a screenshot of how I have this currently set up in excel.
how to create a barcode in an excel spreadsheet? I am trying to print out a sheet that includes a code 128 barcode of a specific number that I type in.
View 2 Replies View RelatedI am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.
I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.
how to replace a range of cells in excel with another range of cells for an entire workbook?
The top range being what I want to replace the Bottom Range with for the entire book
snapshot of the File is attached and the highlighting is to show the range and is not part of the workbook formatting.
I just need to convert a range of cells into a PDF with a macro, is there a simple macro for this?
View 6 Replies View RelatedI am using Excel 2013
I need to print to a printer that is not the default printer, a range of Cells e.g. B4:L28 on Sheet Print Out.
The code is to be added to a VBA routine that already exists that collects & arranges the data on the Print Out sheet from other sheets in the workbook. This routine is assigned to a button on another sheet.
I'm using Excel 2003. I've got two different .XLS files, each with multiple sheets.
I'm trying to create a macro which will copy a range of cells from one sheet on one .XLS file (which is closed) to a specific place on a specific sheet on the current .XLS file (which is open).
So for the sake of argument:
I've got two Excel files: C:ApplesOldFile.xls and C:OrangesNewFile.xls
OldFile.xls is closed -- NewFile.xls is open and in front of me.
I'm trying to copy the data in ranges B6:C41 and F6:F41 from Sheet2 in OldFile.xls to the same ranges on Sheet6 in NewFile.xls. There are no formulas in these cells -- just data (numbers).
I keep getting error messages, failures to copy to clipboard, etc.
I would like to mirror a range of cells between two sheets in the same workbook, so that if the data is manually input into one of the cells in range (E5:H11) in 'Sheet 1', it is automatically updated in the corresponding cell in (H33:K39) of 'Sheet 2', and vice versa.
Using Office 2013. T
Using Excel 2007.
I have shapes in 3 different rnages of cells on a cell worksheet:
R1 = $D$5:$D & lngRows (row=32)
R2 = $G$5:$G & lngRows (row = 51)
R3 = $M$5:$M & lngRows (row = 50)
I need to set the properties of the shapes in each range differently The shapes in R1 are Left + 46 But the shapes in the other 2 ranges need to be just left My problem is in this bit
Code:
'Set properties for each shape in ShapeRange
For Each sh In ws.Shapes
I need to be able to set properties for each range separately instead of the entire sheet. Full code below (only Range $D at the moment - works)
Code:
Option Explicit
Sub AddShape3()
'Purpose: Add small rectangles to database table/fields for
' brainstorming and documenting relationships and queries
'
'Resources:
[Code]....
I am using windows 7 64bit sp1 and excel 2010 32bit sp1
I am trying to fix this formula (it takes a range in a unique column, and multiple row:
Code:
=IFERROR(INDEX($B$1:$B$6,SMALL((IF(LEN($B$1:$B$6),ROW(INDIRECT("1:"&ROWS($B$1:$B$6))))),ROW(A1)),1),"")
from here
I want to make it work on my array in a row, like this: (i need to remove the blank cells and the output have to be still in a row)
value1
empty cell
empty cell
value 2
value 3
empty cell
output:
value1
value2
value3
I need a function becouse I have dynamic table with something like 10k rows and 50 columns.
using excel 2010
I created named range selection called "Contractors".....how do I put the drop down lists in a column of cells now?
I am using Excel 2007.
Sheet 1 - I have columns filled with dates (weekdays only) For example 28-May, 29-May, 30-May up to 28-Nov. Above 10 rows below each date columns and each cell has some values.
28-May29-May30-May
0.50.50.5
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
Sheet 2 - I have Start date defined in B1 Cell, and End date defined in B2 Cell
I need defining the formula to sum all the cell values fall between the date range defined in Sheet 2 B1 and B2.
For Example if B1=28-May B2=30-May, I want the sum of all the numbers come under the range of 28-May to 30-May, with this above example, it should be 19.5.
I have a worksheet which has various figures for each day of the week however I need to establish the weekly average of these figures.
Due to the way in which the figures are displayed, I am unsure how to use a formula which does not require a range with cells located adjacent to one another.
I have attached a test sheet as an example. The cells in yellow require the formula and I need a weekly average for criteria 1-3. This formula also needs to be compatible in Excel 2003
Test Sheet.xls
I'm new to Excel 2007... whilst I'm managing to find most things I'm used to using in 2003, I have an issue in one workbook that I can't figure out.
When I click in some single cells (not all), that cell and several below it automatically highlight as a range... left-clicking initially highlights the cell, but as you release the mouse button, the others below it also highlight.
I have a range selected (A4:C15).I would like to deselect the range and make A4 the active cell. Is this possible without a macro?
With a macro, one could use:
Application.Goto Selection.Cells(1)
I generally select a large number of cells and would like to go back to the start cell in the range. I could do it by pressing the left and right arrow keys but is there a shortcut that will allow me to do the same?