I am trying to do is use a loop to store data from a range into a 3 or 4 dimensional Array and then output the data from the Array in another range. so for example the i want loop through the data in this range and store all data that is in account 701 into an array and then output this information in another range (tab). The data would have several different account but I only want to see one at a time.
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code: for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row) if x = y then *storedRow = rowNum end if next rowNum *
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
What I am trying to do is during a loop operation, which subtotals variable ranges, I want to store the locations of the cells that it puts the sum function into. I.E. if based on criteria it determines that range E4:E12 is summed into E13, I need to save E13 to use in a formula once I'm out of the loop. I don't know how many instances it will find and there's the possibility in the future that not only will the number of instances increase, but the location could always be different as well. Any way to do this without a million lines of code.
I would like to use array v to store all the results of the for loop u...How can Ido it?
Dim myRange As Range Dim AnsRange1 As Integer Dim AnsRange As Range Set myRange = Application.InputBox(Prompt:="Select row to insert 10 rows below", Type:=8) AnsRange1 = myRange.Row Dim u As Integer Dim v As Integer Dim var() As Single v = 0 For u = 23 To 24022 Step 9 var(v) = u Next u If Not (AnsRange1 = v) Then MsgBox AnsRange1 Else Range(AnsRange1 & ":" & AnsRange1 + 9).Insert Shift:=xlDown End If End If
I am trying to loop through column A and I want to store in an array where I find "App" within the cell value. I am trying to find "App" but will store the whole cell value in the array. I could not figure out the Find method, so I tried the MID function but am having no luck.
Here is my code:
Code: Sub Arraytest() Dim arr As Variant, lastrow As Long, i As Long, f As Long, l As Long f = 0 lastrow = Sheets("Sheet1").Range("A" & Rows.Count).End(xlUp).Row ReDim arr(1 To 1, 1 To lastrow)
I have code which is convert some range of excel to Png and store to my local drive. This code is working fine.
I have created web site on my intranet and the data store on server, now i use this code and pickup image from my local storage i.e. from "C" Drive and paste in to service folder, bcoz i uploaded report as a Image and it timely refreshed and changed
Is there any way so this code directly store to service folder, if i can use IP address or HTTP path
I had tried with HTTP path but it is not working.
My server path is [URL] ....... OR
Is there any way when local folder got image than automatically server folder also get same image...
Sub bah() ''' Set Range you want to export to file Dim rgExp As Range: Set rgExp = Range("B2:C6") ''' Copy range as picture onto Clipboard rgExp.CopyPicture Appearance:=xlScreen, format:=xlBitmap ''' Create an empty chart with exact size of range copied
I can't quite seem to figure out the syntax for pulling a Range variable out of an array of type variant. I always seem to receive the error message "Object variable or With block not set", an example of my code as follows:
Dim currentRange As Range For i = 2 To UBound(myArray) currentRange = myArray(i) ' insert code here Next
I have also tried:
Dim currentRange As Range For i = 2 To UBound(myArray) Set currentRange = myArray(i) ' insert code here Next
Which results in the error "Object required". What is the correct syntax?
I have a list of names from cell A1:A10 in sheet "Input." Each of these names has its own corresponding sheet in the workbook. I want to be able to run the same exact VBA code for each sheet. In other words, I am trying to get my name variable to automatically change to the next value on sheet "Input." I'm sure this is pretty simple to do, but I can't seem to find anything that works!
- I have total of 13 sheets in a workbook - 12 sheets represent 12 months with data; 13th sheet is single sheet in which i would like to get complete overview of 12 months
- each of 12 sheets has actually sales results for multiple products with following data: internal code, manufacturer part number, name, and qty sold in that month
- situation is that some products have been phased out during the year and some were introduced so each sheet is slightly different in terms of in which row certain product is located
What i would like to achive is to make 13th sheet (whole year overview) do the following: - there is a list of all the products in it, each product has unique internal code - this code (from each line) should be used to find that code in each monthly sheet, then find its monthly sales value (copy it) and paste it in sheet 13 in cell that represents this product and particular month.
In other words i would like to see for each product what was monthly sales throughout this year, but avoid manually filling in qty for each product per month.
I want to store a list of strings in an array with their position so that I can sort them alphabetically and then be able to put them back in their original order again e.g.
John 1 Charlie 2 Paul 3 Andy 4 etc,
So when they are alphabetized (is that a word?) they become
Andy 4 Charlie 2 John 1 Paul 3
My plan was to store them in an array, but I can't think how to do it. In python, I would just make a list of tuples, what is the best way to do this in VBA?
Currently We enclosed a Workbook (with exiting VBA code) In this workbook 3 sheet exit (Edit, Details, Summary)
In Details Sheet store Detail Entry of Invoice & in Summary Sheet we store all generated Invoice details in summary form
We want new VBA or correction in existing VBA.
My Exiting VBA work following..
When Enter Invoice Number in Edit Sheet (Cell B2) then Display Entered Invoice Data
First Code Find Invoice Number in Summery Sheet if Invoice Number found then Record Display of Selected Invoice
Here we Edit As per our requirement then We Press Y in Edit Sheet Cell C30
If Found C30 "Y" & "Data ok" in E30 then DELETE Selected Invoice Data From SUMMERY & DETAILS SHEETS & COPY THIS EDITED DATA (RANGE A33 TO G33 In Summery Sheet & Range A35 to A60 in Details Sheet)
My Exiting code work perfectly as per above
We want only following thing
Currently when we copy edited data that move to end of sheet We want to Change & same place where data exit previously before edited. Because serial number disturb.
NOTE : in Editing Time is it possible Few Item Delete or Few Item Add
I have a two rows of data one containing names and the other containing corresponding numbers. The names are static and the numbers change on a daily basis. I want to be able to copy the numbers to a static table next to each name on a daily basis (so I can see what the value was a few weeks ago).
Is there anything I can write to do this job?
My thinking was to set a vlookup to grab the data but i'm not sure how this would work because the vlookup would change daily when the numbers change
Is there a Function or Formula that can store data from say cell $J$21 and store the result in L21 in the same worksheet and every time the data in $J$21 changes the result moves down 1 ie: L22 etc.
I have the master data in sheet 1 with the some details of different stores eg store 1, store2, store3 etc which are in Column D.
I need to filter the data by each store and paste in the new sheet. If i use advance filter>copy to another location, the system is not allowing to select different sheet.
is ther any way that If I run the macro, the data is filterd by Store names and the same data should be pasted in a different sheet with the store name. that is all the data related to Store1 should be pasted in Store1 Sheet.
I am trying to do Loop through Range I have workbook and it has two sheet (sheet1 and sheet2) sheets ("Sheet1").range(A1:K30") hold the Doc_ID (E.g. 78002)
What I want to do........if Range(A1:K30) = Inputbox("Enter Your Doc_Id Number") Then Copy that Cell Only and paste it to in Sheets("Sheet2") -Column A
I have a range of letter values. The values vary between A, a, and B. I have a "For Each" loop that doesn't do what I'd like. The way it's written, I'd think it'd delete every column that doesn't contain the letter "A".
Code: For Each k In rngMyRange If k.Value "A" Then k.EntireColumn.Delete End If Next k
It seems to miss entire columns. Do I need to initialize k?
I have percentages in each row. Let's say from A4 to Z4. Each cell can be 20% at maximum In Visual Basic I want to write a macro that sums the cells up. So when the sum is less than 100% I want to distribute the remainder among the cells that are below 20%. I want to do this until the total is 100%. So the new percentages have to be entered in the appropriate cells.
How can I do this? I need some sort of loop but I can't get anything to work. With a 'for each cell' statement I always get Value#.
I am trying to loop through a range, checking for a cell to contain one of two characters and then put a value in a cell to the side (well 3 away) of it. Im getting an error for Type mismatch on line:
VB: If CellContent = "h" Or "v" Then
the data in the cell is an along the lines of '12.34.56.43 som-thi-vh-ng1'
VB: Dim MyRange, MyCell As Range Dim CellContent As String Sheets("Sheet1").Activate
I tend to use a lot of For Each loops when I want to go through a range looking for something but this time I'm not so sure it will work.
I have 9 databases each containing over 400 rows with different pieces of client information, these databases are shared between around 40 people (I've also used the 'Allow users to edit ranges' utility to restrict access). What this means however is that the users cannot delete an entire row, instead they can only 'clear contents' on individual cells. This is fine until I try to generate statistics from the databases using autofilters which stop at the first blank row.
So I need to write a backwards for each statement that starts at the bottom and deletes all the blank rows on the way up to the top. I've tried similar things to this before using the For Each but when you use it to delete a row it sometimes skips the next row as it continues at the next one.
I've not managed to get it to work before, I'm just looking for a little guidance really as to how to do this correctly.
VB: For TopRow = 1 To BottomRow = Range("A1").SpecialCells(xlCellTypeLastCell).Row Step -1 'If is blank delete row..... Next
I am working with loans, and I'm trying to program a routine that adds every installment a client owes, so I can know the total amount owed, depending on how many unpaid installments she has. Let say for a client I have every installment in column A (rows 1 to 5), and in column B, I want to add them all. The output should be
Cell B1: "sum(A1:A5)" Cell B2: "sum(A2:A5)" Cell B3: "sum(A3:A5)"... and so forth
Since I have many loans, I need a dinamic routine to that sums every installment, where amount of installments vary from client to client. My proposal is (adding from the last installment to the first one):
VB: months = 4 'an example For j = 0 To months - 1 initial_row = ActiveCell.Row 'because I run this several times. In this example I am in row 18[code]....
For some reason this is not working, and what I see in Excel after running it is: SUM('AJ18':'AJ18'), which doesn't work.
I'm trying to understand a code from work and I can't get it. I copied only a part of the code here so please don't run it. Also, I have manual inputs in columns L and M (nodes labels such as 1, 2 and 2,3) and section labels on column N (such as BarFT3, BarFT4 etc):
[Code] ..........
What is this loop doing? I just get the first For loop: goes through every lable on colum N (from 1 to ne) but then what?
What is happening to range nudo(n,j)? How works this ">" sign between nudo(n.j) and nn?
I have a spreadsheet which I need to remove all the blanks from, but instead of shifting cells up (I figured out how to do that in a macro), I want them to shift left.
I understand the basics of for...next loops etc, but I can't seem to understand how to make the selection in a range string variable. Not sure if this is a good explanation!
I have an excel sheet with set ranges in it. I would like to refer to these ranges in my code, but i am doing something wrong. Here is a portion of the code. The range name is 'Status'
What I'm trying to do is open a closed workbook from an active one, then go through a range looking for cells that has a different value than "noone", and copy the rows that does have something else than "noone" into the first worksheet.
What I've got so far is:
Code: Private Sub CmdHent_Click() Dim vikar As Range vikar = Range(I12, I42)
Application.Workbooks.Open Filename:="C:Documents and SettingsoybMine dokumenterook1.xlsm" Windows("book1.xlsm").Activate Sheets("Sheet1").Select
