Fetch Website Data Table By State

Aug 20, 2013

I would like to be able to have Excel VBA pull down the data from the following website.

The first URL will take you to the website, but you then need to select a state shown in bold from the Radio side of the index window in the middle of the screen. Once at the next screen, this is the table I wish to download into excel.

I want to do this for all the states listed. How can I do this or is it possible since you have to select a state prior to the listing.

HTML Code: [URL] ..... I found this code from anothe thread but it did not work.

Code:
Sub GetData()
Dim x As Long, y As Long, t As Long
Dim htm As Object

[Code] ....

View 1 Replies


ADVERTISEMENT

Create New Table (or Matrix) From Exported Set Of Data From Website

Jun 19, 2014

I have a set of exported data from a Project Management SW (activecollab). The result is an excel .xslx file with a table inside with a lot of cells I am not going to use. Additionally, what I would like to do is creating new tables on other sheets that use only the data I want from the export. For example, I have two projects and three employees. I want to create three tables with the names of the three employees. In each table I want the tasks done by them and the time they will spend on them in order to create a Gantt chart. I need a solution that allows me to create new tables with selected data from a bigger cluster (the export). you do not need to give me the exact solution, I only need to know whether it is possible or not and where could I get the info to do what I want.

View 1 Replies View Related

Returning State Cities By Inputting Given State Abbreviation

Jun 3, 2012

I'm trying to create an array formula that returns all the cities in a given state by imputing the state's abb in cell K2. The returned cities go into column J. California has the most cities(430) and the cities are 5000 rows deep.

View 7 Replies View Related

Fetch Corresponding Data Value

Dec 8, 2013

I need to fetch corresponding data value from a data set which is spread across the sheet horizontally as well vertically. i need the net sales and net profit figures to fetched to a different worksheet/book. i have quarterly data horizontally and yearly data vertically. Below is a table in a horizontal manner. How to automate or less-time-consuming

Output required as:
period 6-30-2000 9-30-2000
net sales ........ ............
net profit ....... ............

Type
Un-Audited

Date Begin
4-1-2000

Date End
6-30-2000

[Code] ......

View 4 Replies View Related

Data Fetch

Mar 26, 2008

I have a sheet which has certain formulas & charts. I have a folder which has several workbooks of data.

Generally, I open the folder, open one workbook, copy the data, paste it to my Master Workbook, and based on this data, my charts update.

Now, the problem is that, I have to open every workbook one by one, copy and paste it to the master.

I have not less then 210 workbooks. I just want to know if it is possible to open the folder, open the desired workbook, copy the specific data and past it to master workbook, FROM Maste workbook itself.

View 9 Replies View Related

Pivot Table Reverts To Earlier State When Clicking Refresh?

Feb 5, 2014

when I refresh data in a pivot table. Each time I click 'Refresh All' it alternates between a refreshed version (up to date with source) to an earlier set of data. This is concerning because operators will not be aware that they are not using the most up to date data 50% of the time.

View 3 Replies View Related

Fetch Data From This Webpage

Apr 2, 2009

Fetch data from the table on the page given by the link below..
http://www.moneycontrol.com/stocks/f...l&sort_order=0

View 9 Replies View Related

Fetch Data From ASPX Webpage

Sep 12, 2013

I tried to use the following code to get data from an ASPX webpage:

[URL]....

VB:

Sub Fetch_Marcas()
Dim IeTbl As Object
Dim obj As Object
Dim Scrn As String
Dim objIE As SHDocVw.InternetExplorer 'Microsoft Internet controls (shdocvw.dll)

[Code]....

However, I cannot get past the point where I click over the register (highlighted in yellow in Picture 1), to get the data displayed at Picture 2.

Picture 1
Picture 1.jpg
Picture 2
Picture 2.jpg

Please note that this query requires to click over what is not a button (I looked in the forum, but no similar question was made before on this topic).

View 6 Replies View Related

How Do I Fetch Data From Different Excel Sheets

Jun 13, 2007

Is there a way to capture the records(which meets the criteria) from different excel sheets' sheet1 (A.xls,B.xls) located in some path (c: est) and copied them into our own Result.xls spread sheet?

It would be great and very useful, if you could provide the solution for this.

View 9 Replies View Related

Macro To Fetch Data Based On 2 Criteria?

Oct 22, 2013

Attached is my .xls with dummy data Fetch data By Director.xlsx.

My intention is that once the Director and Month in tab 'By Director & Month' is chosen and the Fetch Data commandbutton is clicked, a new workbook should open.

This new work book should have :

all entries in tab 'Monthly Invoice Input' for that Director-Month combination,along with a sum total of column Q(Total invoice amount) in the last row.

View 6 Replies View Related

Vlookup Macro To Fetch Data From Another Worksheet?

Aug 10, 2014

I am trying to create a macro for vlookup. Each time the name of the source file changes. I dont want to update the formula everytime. So Iam trying to do a macro which will fetch the data from the file that the user mentions in the sheet2.

I have attached the source file and the VLookup file. Now when I enter the source file path in sheet 2 of workbook "Vlookup", and then if I run the macro it should open the file and put the dates in Sheet1 (Columns "D" and "E") of workbook "Vlookup". The dates in the source file will be available in sheet 1(column F and H) of that workbook.

View 1 Replies View Related

Excel Macro File Which Will Fetch Data From SQL Server

Sep 30, 2013

I have created a macro file which will fetch the data from sql server. Here is the code

f Me.Cmbchoose.Value = "" Then
MsgBox "Please Choose From the drop down Menu!!", vbExclamation
Exit Sub
End If
If Me.Cmbchoose.Value = "Merchants Reports" Then
Dim oConn As ADODB.Connection

[Code] .....

The code is working fine. Now my question is that I want to access it from my home. How do I do that without DSN set up?

View 5 Replies View Related

Formula To Fetch Data Related To Matched Value In Separate Workbooks

Dec 20, 2013

So the problem is that I have two workbooks: one has a set of identifying values which are a subset of one of the sets of values in the second and I need to match them up. In addition I need to take the values two columns to the right of the matched values in the second workbook and put them in the first.

Here is what my formula looks like now.

=IF(A5=VLOOKUP(A5,'[WBOOK2]Sheet1'!$A:$A,1,TRUE),INDEX('[WBOOK2]Sheet1'!,MATCH(A5,'[WBOOK2]Sheet1'!$A:$A,0),3),"NF")

Whenever I try to run it an error message comes up and highlights the match function name.

View 12 Replies View Related

Fetch Data From Excel Database And Display It On Respective Textbox?

Apr 4, 2014

I want some code on how to fetch data from an Excel Database and display it on respective textbox.

Like I have these coloum name in excel sheet; Emp Id

Name
DOB
Dept
Reporting to
Transport req.

I want to have VBA code to fetch it on txtbx1, txybx2 and so on.

View 1 Replies View Related

Auto Refresh Table (Import From Website)

Jul 12, 2014

I import a table from a website and its work fine.

My question is, Is there any macro or formula to highlight the cells after the update process (only if the value changed) ?

Also i need new entries to add automatically at the bottom(below the last row).

Sample table:
Data1
5

Data2
6

Data3
4

View 1 Replies View Related

Macro To Access Website Page & Copy Table

Jun 27, 2008

I'm doing some extremely repetitive work with a web tool at work. I need to import about 1800 tables for my first assignment and 5000 for my second. I did a search on the forum and found out that Excel and vba is able to import tables from a website's chart which is amazing. I recorded a macro and got

Sheets("Sheet2").Select
Range("A1").Select
With ActiveSheet.QueryTables.Add(Connection:= _
"URL I can;t give out this information" _
, Destination:=Range("A1"))
.Name = "index"
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = False
.BackgroundQuery = True
.RefreshStyle = xlInsertDeleteCells
.SavePassword = False.....................

For each session I have to go to my site, log in with a username and password which is the same everytime then go to a specific page select the right drop down and import chart. The Chart under the drop down is the chart I need to import. The macro I recorded has no problem doing this but however it keeps grabbing the same chart, how do i fix that, so it knows to select the right drop down then import the right chart?

View 3 Replies View Related

Open Set Of Files To Fetch Data Starting From A Master File Where The Links Are Given Using A Loop

Aug 29, 2006

I am trying to open set of excel files to fetch data starting from a master excel file where the links are given using a loop. Some of files given as links are either absent or the link is wrong.

* What is the syntax to find if the link is correct/present

* What is the syntax to find if the file is present in specified location

* What is the syntax to find if the file is password protected to open

* I use error handler to resume the next statement if OPEN statement fails.It works fine inside the loop only for first two files.

For example if the third link is errorneous the error handler fails and RUN TIME ERROR occurs.

View 5 Replies View Related

Macro To Prompt Then Record Data Following Button State Change

May 10, 2007

I am looking to find a way and synthesize code that will prompt the user for text data when he/she clicks a radio button, then place that text data in a "Notes" worksheet within the same workbook. Given that there are multiple radio buttons, with options of "OK" and "attention needed" (it is a checklist of maintenance items), I also need to find a way to have each note listed sequentially in the notes worksheet. My questions: Is this possible using macros? Can you steer me in the right direction? (change event, inputbox, then what?)

View 3 Replies View Related

Reverse Engineer Macro To Return Data Back To Similar State?

Feb 26, 2014

I am trying to create a macro, that ultimately does the reverse of one written a while back.

I have created a macro that exports "Roster_Data" to "envision_Roster" in .csv style formatting. What I want to achieve is reverse engineer the macro to return the data back to a similar state.

I am trying to transpose column D into rows that correspond with dates in column c in a sheet called "OutputView" this in essence is similar if not exactly the same as the original worksheet "Roster_Data"

I have split the macro I am working on into three separate modules.

Module 1 - Initial Export of "Roster_Data" to "envision_Roster"

Module 2 - Format and output worksheet to find MAX date and MIN date and produce top rows of data

Module 3 - Analyse, Undertake Logical Tests of data, and transpose to suit (Replicate the initial "Roster_Data" view)

I'm having trouble visioning this altogether so I've been starting with basic code to output basic stuff, but I still can't relate this back to my data.

[Code]....

View 2 Replies View Related

Import Website Data Into Excel (Scrapping Of Data)

Jun 20, 2014

I have a tedious task of copy/paste from our website. have a look at below sample data. I have around 1500 rows of data like this.

Sheet1
A
B

[Code]....

Column A has input data which i need to copy and paste in a web form. Column B will have results scrapped form webpage[ URL]. This webpage will need login details

If a code can be written which take value form column A of spreadsheet and paste in webpage like shown in above image and hit search button. Next webpage will be loaded with number of results like shown in below. Take the number of results and paste in column B of spreadsheet.

View 1 Replies View Related

Extracting Data From A Website

Jul 30, 2013

I am trying to extract data from a website:

[URL] .....

I looked at the source code of the website and realized that if you notice (above) that the variables listed in the link (i.e year, month, day) are exactly what i need to change in order to get the data for a specific date. how can I accomplish this using VBA. so say I have in on an excel sheet year in column A, month in column B, and days in column C (time interval is constant so we don't have to worry about stime and etime). and i run the macro and it loops through each row taking year,month,day for all rows and saving the data as .csv or xls files?

View 1 Replies View Related

Retrieving Data From A Website

Jul 31, 2013

retrieving data from financial website databases like yahoofinance.com and bloomberg.com. I'm trying to make an automatic stock analysis model to read from the website database and retrieve the data into excel sheets. For example, when opening the excel model the user gets a popup to enter the stock ticker, the user enters the ticker and gets a set of data. Is this do-able in excel?

View 2 Replies View Related

Fetching Data From Website?

Jun 20, 2014

I have list of url in a column. I want to fetch data from all the links and store it in a excel sheet.

I have written code, the code fetches only 1 links data at a time. I want to loop that vba macro and fetch all the data at a time.

View 4 Replies View Related

Pulling Data From Website When Url Changes

Feb 8, 2008

I have written a macro to pull in data from a website each day. However the macro falls over because the end of the url changes slightly each day as the website provider updates the information. Unfortunately there does not appear to be a logical pattern to the number change in the url and so I don’t think I can pre-empt what the change will be. The path through the website remains the same, but the url changes as a new csv document replaces the old one. Is there any way of writing the macro so that it opens/picks up the current url rather than a fixed url?

View 9 Replies View Related

VBA- Pulling Data From Website

Aug 24, 2008

I went through the thread http://www.mrexcel.com/forum/showthread.php?t=302438. I have similar problem of pulling the data from http://www.nseindia.com/ site. Could you please help me?

The navigation to the page required is as below.

http://www.nseindia.com/ > Equity > Historical Data > Security-wise data >

eg. NSE Symbol: RPL, Series: ALL, From date: 01-01-2008, To date: 01-05-2008.

After clicking on the 'Get Results' button it navigates to the page with tables. At the end it says "Download file in csv format". upon clicking this a csv file opens. (http://www.nseindia.com/content/equi...-2008RPLXN.csv)

I need this page to be opened in Excel sheet. How should I go ahead?
(Basically I need historical stock data csv files of various stocks)

Even though a simple web query opens the page, it do not work if the parameters (stock name, date) are changed.

I found that the last resulting page in csv is using a "REFERRAL URL". Could this be a problem? How to get around?

I know little bit of VBA and can further work to pass variables.

View 9 Replies View Related

Extract Data From A Website

Jan 8, 2010

Is it possible to extract data from a website into an excell workbook using data from the workbook?

I have rough workbook that i gather data from 3 different websites to calculate a rough market value for DVDs that I buy and sell. I am good with excel but have no idea about importing data into it.

Currently I copy and paste from the sites on an as needed basis but it is a slow slow task when I have several dozen or more to do per hour.

View 9 Replies View Related

Importing Data From A Website

Jun 3, 2003

I wish to surf to a website and retrieve the bottom entry in a column The column updates dynamically with a new number added to the bottom on a daily basis.

Here is the website URL: http://global-view.com/fxhist.TXT.

The column I am interested in is the second column from the left under the History section. The column contains close prices for the currency symbol EUR/$.

View 9 Replies View Related

Copying Data From A Website ..

Apr 19, 2006

I have managed to manipulate a website by entering some dates into the input boxes then go to another page with the information I need. I am wondering if anyone knows a macro I can use to copy the data directly to a new worksheet?

my code is below ...

View 9 Replies View Related

Getting Website Data - Multiple Tabs

Mar 8, 2013

I've only recently ventured into the VBA scripting and am finding it quite exciting. After doing some trivial stuff, I'm trying to work with websites. Currently, I'm trying to pull data off of a website which poses a form which has to be filled first. I've been successful in filling the form and clicking submit, through the code, but the site opens the results in a separate tab in IE. I am unable to make it go to that tab and copy-paste data from there.

Secondly, instead of just blindly copy pasting, it would be better if the data is pasted in a more readable format (as on the website). The following code is plainly copying and pasting the data as-is and hence rendering it unreadable:

VB:
.ExecWB 17, 0
.ExecWB 12, 2
.PasteSpecial Format:="Text", link:=False, DisplayAsIcon:=False

View 1 Replies View Related

Taking Data From Website To Spreadsheet?

Jun 21, 2013

I am an excel novice trying to create a list of local churches. There are several online lists that I am taking the data from but, being a novice, I am entering the data manually. How to set up a method to bring the data into excel and order it where I want it.

I am attaching the spreadsheet.

These are the websites I am taking my data from: [URL]

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved