I want some code on how to fetch data from an Excel Database and display it on respective textbox.
Like I have these coloum name in excel sheet; Emp Id
Name
DOB
Dept
Reporting to
Transport req.
I want to have VBA code to fetch it on txtbx1, txybx2 and so on.
Is there a way to capture the records(which meets the criteria) from different excel sheets' sheet1 (A.xls,B.xls) located in some path (c: est) and copied them into our own Result.xls spread sheet?
It would be great and very useful, if you could provide the solution for this.
I have created a macro file which will fetch the data from sql server. Here is the code
f Me.Cmbchoose.Value = "" Then
MsgBox "Please Choose From the drop down Menu!!", vbExclamation
Exit Sub
End If
If Me.Cmbchoose.Value = "Merchants Reports" Then
Dim oConn As ADODB.Connection
[Code] .....
The code is working fine. Now my question is that I want to access it from my home. How do I do that without DSN set up?
I have a database sheet with all the data, I want to make a query sheet that display the rows of data when I enter the data in the summary sheet. I have 2000 rows of data and about 24 in type(columns)
So if I enter in cell Hona and Miles 50, it will display all the rows in the database sheet that contain those data...so I assume I would have to insert some kind of formula, or is there a simpler way to do it with out VB/database...
Car Miles PriceGasColor
RaceCar 50 Over1.5Red
Honda 100 Over2.5Black
Lexus 200 Over 3.5Silver
I have a worksheet that I will enter in an age and gender ($B$5 and $B$6 respectively). Based upon these two criteria, I would like to display text in column H(Lower Limit) and I(Upper Limit), showing the norms for their health metrics, a few are below:
Metrics
Measured
Lower Limit
Upper Limit
Total Cholesterol
200
120
200
HDL
40
35
80
Glucose
90
90
130
So, as the user enters in the age in B5 and the Gender in B6 the VBA or formula would populate the cells with the appropriate data. I can get it to work with 1 condition using vlookup. Was thinking VBA might be useful there with the two criteria, just not sure how to code it.
I have a UserForm that Dead Head Miles will be entered into one text box. The Trip Miles will be entered into the second text box I would like for the user form to show the answer after the first entries are made something like this:
1)Dead Head Miles 20 +
2) Trip Miles 500
----times---$2.00
3)Projected Rate $1040 --show this after the DH and Trip is entered and Multiplied by $2.00
I need to fetch corresponding data value from a data set which is spread across the sheet horizontally as well vertically. i need the net sales and net profit figures to fetched to a different worksheet/book. i have quarterly data horizontally and yearly data vertically. Below is a table in a horizontal manner. How to automate or less-time-consuming
Output required as:
period 6-30-2000 9-30-2000
net sales ........ ............
net profit ....... ............
Type
Un-Audited
Date Begin
4-1-2000
Date End
6-30-2000
[Code] ......
I have a sheet which has certain formulas & charts. I have a folder which has several workbooks of data.
Generally, I open the folder, open one workbook, copy the data, paste it to my Master Workbook, and based on this data, my charts update.
Now, the problem is that, I have to open every workbook one by one, copy and paste it to the master.
I have not less then 210 workbooks. I just want to know if it is possible to open the folder, open the desired workbook, copy the specific data and past it to master workbook, FROM Maste workbook itself.
Output should be:
.Column A
AB-CD/EF1-AB
AB-CD/EF1-BC
AB-CD/EF1-AB(100%)
100%
0%
AB-CD/EF1-AB(30%)
30%
0%
AB-CD/EF1-AB(4%), AB-CD/EF1-BC(2.4%)
4%
2.4%
Likewise, I have many combinations. And it is not necessary that only "AB-CD/EF1-AB" combination will come first in a row. In input,Column A values are given. Other columns are empty.
I am currently trying to create a database of products for my company. For each product I would like to include an image associated with it. I then want to have on another sheet a place where the user will click an error and be able to cycle through the products. As tehy cycle the associated image will pop up.
What I need to understand is after importing the image into excel, how do I associate that image to a cell so I can reference it in another sheet of the database. I am not concerned with how large the database will get, my pictures are quite small.
Fetch data from the table on the page given by the link below..
http://www.moneycontrol.com/stocks/f...l&sort_order=0
Trying to use Excel Data List to create a database style report. IE. Originally blank sheet, which is only populated by data containing data matching "filters" input into cells ( say A1 & A2 )
I.e. A1 = Delivery week to be filtered by, and B1 Manufacturer Name
So if I type week "1" into A1 & Manufacturer "Microsoft" into A2, it will show a table only containing data Microsoft, Week 1, and associated data for those lines across the screen.
Week 1
Microsoft
PO number : Date Ordered: Address 1, 2 3 etc....
0011 01/01/13 Somewhere
0015 02/01/13 Anywhere
0213 05/01/13 Nowhere
I know this is much easier with a database, however my manager insists a database cannot be used, and it must be in a spreadsheet format !
I'm tasked with looking up part numbers in Epicor's ERP database and entering the labor cost into excel. Is there any way to write a macro or VB program that lokks at the part number in excel, goes into epicor, pulls finds the part number and cut and pastes the cost data.
I have about 30,000 of these to look up.
which databases people are using with importing excel data into a database.
I want to know people's experiences on different databases and suggestions on which database i can use maybe.
On this moment i do everything in excel, but excel is not longer working properly because of large files that need to be connected to 1 or more sheets.
This is the situation now:
VAX (Dos bases database) -> Comma seperated Files -> Importing in Excel -> Linking the data to sheets.
Now I want to have a database where i can do all normal operations to have a good look and the situation of stock status, ordered parts, sales etc. (inventory control)
Who has experiences with databases ? And what are you doing with that database?
I am trying to do something which is very slow and manual. What i have is like a seperate spreadsheet from every day and have to save each one down manually in the respective date. so for example column C has the date in already. Can you tell me how to save all the excel workbooks which are open (if i open them all) and then use the date in column C (which is in the format 20090217) and save it as a xls in the format 170209 and then close the workbooks?
sorry this is a huge question, just takes me so long to save them all.
I tried to use the following code to get data from an ASPX webpage:
[URL]....
VB:
Sub Fetch_Marcas()
Dim IeTbl As Object
Dim obj As Object
Dim Scrn As String
Dim objIE As SHDocVw.InternetExplorer 'Microsoft Internet controls (shdocvw.dll)
[Code]....
However, I cannot get past the point where I click over the register (highlighted in yellow in Picture 1), to get the data displayed at Picture 2.
Picture 1
Picture 1.jpg
Picture 2
Picture 2.jpg
Please note that this query requires to click over what is not a button (I looked in the forum, but no similar question was made before on this topic).
I have inherited a number of databases in work (running Office 2003). It has quickly become apparant that a vast amount of work is duplicated and so i am trying to cut down the data input and therefore the possible errors.......
I have narrowed most of the work down and now have a major worksheet (is that what you call a complete Excel file) named "master database" and several over minor files....
Currently what i am trying to do is to get one of the minor files to auto populate an area of the master database. I will try to explain it below...
1. Minor database has 2 columns with data i require to auto populate the master database. (1 column (B) is called 'off', the 2nd column (C) is called 'on').
2. A number will be inputed manually into either 'B' only or 'B and C' columns, depending on the criteria of the job..
3. The criteria of the job is dictated by column (Z) where the text 'A' or 'ATL' is inputed
4. The master database i would like to add up the numbers inputed as a total from columns 'off' and 'on' and place them into seperate columns 'E' and 'G' of the master database.
5. IF column (Z) shows 'A' then only column (B) 'off' is to be calculated and put into the master database at column (E)
6. IF column (Z) shows 'ATL' then BOTH columns (B and C) 'on' AND 'off' are to be added together and column (G) populated on the master database.....
To make mattters more complex. An expiry date is shown on the master database at columns (D) and (F).
IF column (E) does not exceed 12 by the expiry date, i would like the cell (D) to turn red
IF column (G) does not exceed 10 by the expiry date, I would like the cell (F) to turn red
Attached is my .xls with dummy data Fetch data By Director.xlsx.
My intention is that once the Director and Month in tab 'By Director & Month' is chosen and the Fetch Data commandbutton is clicked, a new workbook should open.
This new work book should have :
all entries in tab 'Monthly Invoice Input' for that Director-Month combination,along with a sum total of column Q(Total invoice amount) in the last row.
I am trying to create a macro for vlookup. Each time the name of the source file changes. I dont want to update the formula everytime. So Iam trying to do a macro which will fetch the data from the file that the user mentions in the sheet2.
I have attached the source file and the VLookup file. Now when I enter the source file path in sheet 2 of workbook "Vlookup", and then if I run the macro it should open the file and put the dates in Sheet1 (Columns "D" and "E") of workbook "Vlookup". The dates in the source file will be available in sheet 1(column F and H) of that workbook.
I would like to be able to have Excel VBA pull down the data from the following website.
The first URL will take you to the website, but you then need to select a state shown in bold from the Radio side of the index window in the middle of the screen. Once at the next screen, this is the table I wish to download into excel.
I want to do this for all the states listed. How can I do this or is it possible since you have to select a state prior to the listing.
HTML Code: [URL] ..... I found this code from anothe thread but it did not work.
Code:
Sub GetData()
Dim x As Long, y As Long, t As Long
Dim htm As Object
[Code] ....
I am trying to create a database that contains data taken from several work books that i have saved in one folder on my hard drive. These workbooks contain quite a lot ** data, but i only want to extract the data i want to instead ** having to extract it all? these works books are used by several other people as well, so i want it to be able to update as data changes.
I was thinking about using data links, but that only seems to extract all the data instead ** just what i want?
Following macro code is for copying Excel Invoice Data to Excel Database. Also cleans the specified cells after copying. Its working Perfectly.
But there are some issues that should be solved.
Problem 1: It copies empty cells(""), formula based cells and blank drop-down list.
Problem 2: After copying it cleans formulas too. Formulas must be remain their.
What I am trying to do is extract all the data from a excel database based on criteria. When i specify the site and month I need to pull all the corresponding data and write it to a worksheet. Below is an example. I am not allowed to show all the data it is confidential.
Site Date Operator Month
Chicago 12/3/11 Daniel December
San Jose 4/8/12 Mike April
New York 4/8/12 John April
I need new workbooks based on category name in the below list. Respective sheets should be copied from the existing workbook with items as sheet names. List can be updatable.
category(workbookname)Items(sheets)
Vegetables carrot
vegetables brinjal
meat chicken
meat Fish
meat Mutton
grains Wheat
grains Rice
I have created a form that will add new records to a database. On the database there is a predetermined ticket number. The "Create" form looks for the first blank row and adds the information on the form the database.
What I am trying to make happen is when a "Ticket Number" is entered in the appropriate field on the "edit" form, the "Date Raised" and "Raised By" fields populate based on the information stored on the row for the ticket number enter.
I'm working on an Excel based product. As part of the security process I would like to require the user to enter a product id key into excel. Then the spreadsheet would compare the entered value to some kind of online database to verify the id key is valid. Finally, the spreadsheet would update the online database so that the id key is no longer functional. How easy is this to do?
I know verifying that the id key is valid is fairly simple.
Here is my biggest issue: How to get Excel to update the database and of course what form would this database take. Maybe its a table on a webpage, or google docs. Again the issue is how would I be able to update the table.
I'm importing data from Excel 2010 into a database.
I'm joining to 2 cells into one. A1 = 12 Rushwood Street and B1 = London. So C1 = 12 Rushwood Street London
I need C1 to look like this:
12 Rushwood Street
London
I tried wrap text but when I import it comes out as one line in the database.
So the problem is that I have two workbooks: one has a set of identifying values which are a subset of one of the sets of values in the second and I need to match them up. In addition I need to take the values two columns to the right of the matched values in the second workbook and put them in the first.
Here is what my formula looks like now.
=IF(A5=VLOOKUP(A5,'[WBOOK2]Sheet1'!$A:$A,1,TRUE),INDEX('[WBOOK2]Sheet1'!,MATCH(A5,'[WBOOK2]Sheet1'!$A:$A,0),3),"NF")
Whenever I try to run it an error message comes up and highlights the match function name.
Macro to find data from a huge database of items of equipment and find certain ones relevant to an area. I am using Excel 2003.
I have a spreadsheet which has three tabs.
Tab one has a list of equipment with a Ref (Col A), ID (Col B), mile (Col C) and chain (Col D) start and a mile (Col E) and chain (Col F) finish.
There are about 25 different Refs and IDs, but all rows have different Mile and Chains.
The second tab is an identical template of the third tab which is where I want the results to go (see below)
The third tab is raw data which list thousands of items but I want the macro to find the items which are in the first tab using the ref, ID, mile and chain information.
I have a problem to write a VBA code for the following task:
My worksheet has a column that has a unique code in column C (Ex: HR1) which is not repeated throughout column C, and I need to insert the amount of money spent on this specific code.
I would run a userform that has two text boxes, one that I shall enter the unique code and the other text box shall be the amount of money spent. I would like to know of a vba code that can search the unique code of the value entered in the first text box of the userform, then to enter the amount of the second text box into column D in relation to the respective row which the unique code is located.
I would like that the amount entered in column D regarding the unique code could be added automatically by entering any new entries in relation to the unique code selected, if this is possible. If not possible, to go inserting any new date into the next column regarding the same row of the unique code.
Ex:
A
B
C
D
[Code].....